ICON Vehicle Dynamics 2.5 Series Shock Absorbers for 2017-2026 Ford F-250 Super Duty/F-350 Super Duty (Rear, 3-6" Lift)

These ICON V.S. 2.5 Series shocks are built to the length and damping tune of the 2017-2026 Ford F-250 Super Duty and F-350 Super Duty, for control on the street and composure off road. Piggyback and certain remote reservoir versions include ICON's internal Bump Zone, which adds roughly 20% more damping as the shaft nears full compression. This listing covers 2.5 Series part numbers 37701EP.

What's Included:

• The ICON 2.5 Series shocks named for your part: a pair on most parts, or a single shock where the part names one side
• On Shock System parts, the ICON upper control arms named in the option (tubular or billet)
• The reservoir mounts, bushings and hardware listed for your part in the Kit contents table

Lift springs, spacers and any parts ICON lists as required for your vehicle, such as a brake line relocation kit, extended sway bar links or an IIC module for CDEV shocks, are sold separately. Check the notes for your vehicle.

Features

Tuned for Each Application
ICON configures every 2.5 Series shock for its vehicle in both length and damping tune, with a one-piece digressive piston and premium 5WT shock oil for consistent damping across a wide temperature range.

Bump Zone Near Full Compression
On piggyback and specific remote reservoir applications, a 6061 billet manifold under the top cap forms an internal Bump Zone that adds about 20% more damping force, helping prevent harsh bottom outs during fast compression.

Choose Your Reservoir Style
Internal reservoir shocks keep everything in one body. Piggyback shocks carry a reservoir on the shock itself, and remote reservoir shocks move it onto a hose, both adding oil volume and heat dissipation to reduce fade during prolonged use.

Adjustable Compression Damping Options
CDCV adds a 10-position compression knob, CDXS gives separate high-speed and low-speed compression knobs with 10 detented settings each, and CDEV adjusts compression electronically through ICON Intelligent Control. ICON says a 2.5 Series shock with a piggyback or remote reservoir can take a CDCV upgrade later.

Stout Shaft and Bearings
The 2.5 Series pairs a 7/8" induction-hardened, chrome-plated shaft with PTFE-lined spherical bearings, application-specific mounting hardware and CNC machined 6061 aluminum components.

Rebuildable and Revalveable
Every ICON shock is fully serviceable, so a 2.5 Series shock can be rebuilt when worn or revalved if your vehicle's weight or use changes.

Fitment & Compatibility

Specifications

• Brand: ICON Vehicle Dynamics
• Series: 2.5 Series
• Construction: Nitrogen-charged monotube with internal, piggyback or remote reservoir
• Adjustment: Fixed valving, or CDCV, CDXS or CDEV where offered
• Shock oil: 5WT
• Service: 100% rebuildable and revalveable
• Warranty: 1 year (ICON shock absorber warranty)
• Lift: 3-6"
• For use with lift: 3-6" Suspension Lift
• Reservoir: Piggyback
• Shock series: 2.5 Series
• Shock body diameter: 2.5"
• Valving: CDEV
• Part number: 37701EP

Fit and install notes

• Also Requires Part Number 93502 and Number 67820EP
• Requires iOS operated device to run ICON Intelligent Control App
• Also Requires Part Number 93500 and Number 61721E, 61801E, 67810EP, or 67820EP
• Also requires installation of applicable IIC kit and CDEV front shocks

Installation

Type: Shock replacement, most parts sold as a pair  ·  Install: Professional installer recommended by ICON  ·  Afterward: Retorque the hardware after the first 100 miles

The ICON guide for this vehicle lists the tools, reservoir mounting, any drilling and any extra parts the install needs, and whether an alignment follows. Take care when the axle hangs without shocks attached, because the brake lines can overstretch, and retorque all hardware after the first 100 miles.

ICON guide for part 37701EP:
Tools named in the guide: Jack, Jack stands, Torque wrench, 18mm socket/wrench and 21mm socket/wrench

Resources

• Official ICON installation guide for part 37701EP (PDF): the ICON Vehicle Dynamics step-by-step guide.

Warranty, Shipping & Returns

Warranty. ICON warrants its shock absorbers for 1 year against manufacturer's defects. A shock that fails in its first year of ownership must be shipped to ICON Vehicle Dynamics for inspection and service, and if ICON finds the failure came from neglect, improper installation or anything other than normal wear and tear, the owner pays the service costs, including labor, parts and shipping. Coverage is for the original retail purchaser who owns the vehicle the part was first installed on, and ICON repairs or replaces a defective part at its discretion. Finish, alterations, installation contrary to ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada are not covered, and neither are removal, installation or freight costs. The shocks leave ICON charged with nitrogen: releasing that pressure can make a shock malfunction, and a failure caused by low nitrogen pressure is not covered. Shipping. The carrier and ship method are set by the size and weight of the cartons when the order is placed. Larger orders can arrive in more than one carton. Inspect on delivery. Open every carton when it arrives and check each shock, reservoir and hardware bag against the parts list in the ICON guide before you start. Note any visible carton damage on the delivery receipt and photograph it, because damage reported later is much harder to claim. ICON notes that some finish damage can happen in shipping and is not covered by its warranty.

Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.

About ICON Vehicle Dynamics