LEER HF650M Hard Folding Tonneau Cover for 2022-2025 Toyota Tundra (5'7" Bed, with or without deck rail)

$1,189.00
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
Flash Sale Ends in--:--:--

$40 OFFOrders $500+

Apply at checkout. One use per customer.

Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

Features

  • Flush mount, 12mm profile: LEER mounts the HF650M flush with the bed rails and holds the profile to just 12 mm, so the closed cover follows the lines of the truck rather than sitting on top like a lid.
  • Four panels, flexible access: The cover folds in four panels, a quad-fold layout, so you can open just the back section for a few bags or fold more of it toward the cab when the load is bulky. LEER describes the panels as lightweight.
  • Dent-resistant panels: LEER builds the panels from a fiberglass-reinforced plastic polymer it rates as dent-resistant, and gives them a textured matte black finish that suits a work truck or a daily driver.
  • CYNC latch, either side: Two fingers on the CYNC latch release the cover, and you can reach it from either side of the bed. LEER adds multiple latching positions, and the latch engages whether the tailgate is dropped or shut.
  • No drain tubes needed: LEER's water management system handles runoff without drain tubes, so there are no tubes to fit during the install or to keep clear afterward. LEER also calls the panels weather-resistant.
  • No-drill clamp-in fit: The split side rails clamp into the bed, so no holes are drilled. LEER packs 2 Allen wrenches with the cover for the job.

Description & Fitment

Made for the 2022-2025 Toyota Tundra with the 5'7" bed, part 650337 is LEER's four-panel HF650M. LEER's 3-year limited warranty covers it while the first owner keeps it on the first truck. Four folding panels let you open as much of the bed as the load calls for. The deck rail system can stay or go; LEER lists the fit both ways.

Fitment & Compatibility

Toyota
Years Model Bed Notes
2022-2025 Tundra 5'7" with or without deck rail

Check your fit: this cover fits 2022-2025 Toyota Tundra with the 5'7" bed, with or without deck rail. Measure the bed floor from the front wall to the inside of the closed tailgate and match it to the 5'7" bed before you order.

Not for: other beds or generations of this truck, which LEER covers with separate HF650M parts: 650289 (2014-2021 Toyota Tundra, 5'7" bed); 650290 (2014-2021 Toyota Tundra, 6'7" bed); 650338 (2022-2025 Toyota Tundra, 6'7" bed).

About LEER

LEER.

Based in Elkhart, Indiana, LEER builds truck caps and tonneau covers. LEER backs them with its own limited warranty; for any claim, contact us and we handle it with LEER.

In the LEER tonneau line, the HF650M is the flush-mount, four-panel hard folding cover, alongside the SR250 roll-up, the Latitude soft folding cover and the HF350M hard tri-fold cover.

Buying LEER from Prestige Truck. Keep your Prestige Truck order email with your records: LEER asks for the original sales receipt as proof of purchase on an HF650M claim. For registration, replacement parts or a claim, contact us with your order number and we will work with LEER for you.

Frequently Asked Questions

Which trucks does part 650337 fit?

Part 650337 fits 2022-2025 Toyota Tundra with the 5'7" bed, with or without deck rail. Check the bed length before you order.

Do I need the deck rail?

No. LEER lists part 650337 for the 5'7" bed with or without the deck rail.

Is the HF650M waterproof?

LEER calls the panels weather-resistant and says its water management system needs no drain tubes. The cover is not sold as waterproof, so wrap anything that has to stay completely dry.

Do I have to drill the bed rails to fit it?

No. The HF650M uses clamp-in split side rails with no drilling. It comes with the cover, the split left and right rails, clamps, tie-downs, a prop rod, a secondary tie-down and 2 Allen wrenches.

Can I latch the cover with the tailgate down?

Yes. LEER says the HF650M latches with the tailgate open or closed, and the CYNC latch has multiple latching positions.

Can I travel with the panels folded up?

Yes. LEER's manual says the tie-down straps must be fastened any time you ride with the cover folded open, and it asks you to check the clamps are tight before each trip.

Installation

TypeClamp-in split side rails, no drilling
What's involvedThe split rails connect, push forward to the bulkhead and clamp in, then the cover goes on with its tie-downs, unfolds into place and gets the prop rod and secondary tie-down

Here's the short version. Follow LEER's install sheet (below) for the exact positions and hardware.

  1. Connect the split rails (left and right) and push them forward to the bulkhead.
  2. Install the clamps.
  3. Place the cover on the rails and install the tie-downs.
  4. Unfold and adjust the cover, then tighten the tie-downs.
  5. Install the prop rod.
  6. Install the secondary tie-down.

Stuck on a step? Ask our install experts

Specifications

Specifications
BrandLEER
Part Number650337
SeriesLEER HF650M
Cover styleHard folding tonneau cover, four panels (quad-fold)
MountFlush mount, 12 mm low profile
PanelsFiberglass-reinforced plastic polymer, dent-resistant
FinishTextured matte black
LatchCYNC latch, two-finger release from either side of the bed; multiple latching positions
TailgateLatches with the tailgate open or closed
Water managementNo drain tubes required
MountingClamp-in split side rails, no drilling
In the boxCover, split left and right rails, clamps, tie-downs, prop rod, secondary tie-down, 2 Allen wrenches
Bed length5'7"
Fit noteWith or without deck rail
UPC810059880474

More media

1 video

Warranty, shipping & returns

  • Warranty

    The HF650M carries LEER's 3-Year Limited Warranty: LEER promises the cover is free of material and workmanship defects, with coverage that runs 3 years as long as the original purchaser keeps it on the original truck.
    • Who and where: the original retail purchaser only, on the original owner's truck. The warranty is not transferable.
    • Conditions: the cover must be properly installed and not modified, and LEER asks for the original sales receipt as proof of purchase.
    • Remedy: LEER repairs or replaces a cover that proves defective, at its sole discretion.
    • Not covered: damage caused by accidents, neglect or abuse, by inappropriate use or a faulty install, or by acts of God; a cover that comes off the truck while driving (checking the clamps before you drive is the owner's job); paint damage to the truck; damage from careless unpacking, such as opening the carton with a box cutter; a panel hinge bent past its stop, usually by hauling cargo taller than the bed sides with the cover closed; use outside the cover's specifications or intended application; installing or operating it against the manual; and consequential damage, including to cargo or the truck bed.
    • Shipping damage: LEER excludes damage caused by a parcel carrier in transit, so tell us right away and we will file the claim with the carrier.
    • Care: wash with mild soap and water only. LEER says chemicals and harsh fluids can damage the hinges and seals and void the warranty.
    • Registration: LEER asks HF650M owners to register the cover. Contact us and we will help you register it.
    • To start a claim, contact us with your order number and photos and we will take it up with LEER for you.
  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Order by 5 PM ET on a business day and it starts processing the same day.
    • Most orders arrive within 1-5 business days.
    • We email your tracking number as soon as it ships.
  • Inspect on delivery

    Open the carton without a blade, then lay out the folded cover, both split rails, the clamps, tie-downs, prop rod and wrenches and match them to the parts labels in LEER's manual before you start. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.
Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question