LEER Latitude Soft Folding Tonneau Cover
Free gift included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
Features
- Two-finger CYNC latch: Opening the cover takes a two-finger pinch on LEER's patented CYNC latch at the tailgate end, and it works from either side of the bed. Whichever side you walk up on, you can get into the bed without reaching across.
- Self-tensioning frame: The frame under the Latitude tensions itself, so the vinyl stays pulled tight across all three panels without you adjusting it. Once it is shut, LEER's adjustable cover buckles, with security buckles as a backup, keep the cover pinned to the frame.
- Reinforced commercial-grade vinyl: LEER double-coats a reinforced, commercial-grade vinyl and backs it with a flexible cross-weave fabric. To keep it looking right, wash it with mild soap and water only: LEER says abrasive pads and harsh cleaners can dull the finish.
- Rounded, double-stitched corners: Every corner is rounded, reinforced and double stitched, which gives the cover a fitted look on the bed. LEER builds the corners so they will not fold up.
- Beveled edges and perimeter seals: Beveled edges are shaped to let rain run off, and cushioned seals with fabric extensions ring the perimeter to keep the cover snug against the bed. The Latitude also closes with the tailgate up or down.
- No-drill clamp-on fit: The cover clamps to the bed rails with front twist-knob clamps and rear clamps, and nothing gets drilled. LEER says one person can put the Latitude on or take it off the truck.
Description & Fitment
LEER's Latitude folds in three panels: double-coated, reinforced vinyl with a cross-weave backing, held taut by a self-tensioning frame, with corners rounded and double stitched and cushioned seals around the edge. Two fingers on the CYNC latch open it from either side, it folds toward the cab when you need the bed, and it clamps on without drilling. LEER makes a version for each truck and bed length, each backed by LEER's limited lifetime warranty.
Fitment & Compatibility
Check your fit: pick the Latitude version made for your truck's years, model and bed length. Measure the bed floor from the front wall to the inside of the closed tailgate. Versions in the line: Nissan Frontier: 630102 (2013-2021 Nissan Frontier, 4'11" bed), 630129 (2013-2021 Nissan Frontier, 6'1" bed), 630335 (2022-2025 Nissan Frontier, 5' bed), 630336 (2022-2025 Nissan Frontier, 6'1" bed); Silverado 1500 / Sierra 1500: 630300 (2019-2025 Chevrolet Silverado 1500, 2022 Chevrolet Silverado 1500 LTD, 2019-2025 GMC Sierra 1500 and 2022 GMC Sierra 1500 Limited, 5'10" bed), 630301 (2019-2025 Chevrolet Silverado 1500, 2022 Chevrolet Silverado 1500 LTD and 2019-2025 GMC Sierra 1500, 6'7" bed), 630120 (2014-2018 Chevrolet Silverado 1500 and 2014-2018 GMC Sierra 1500, 5'9" bed), 630170 (2014-2018 Chevrolet Silverado 1500, 2014-2018 GMC Sierra 1500, 2019 Chevrolet Silverado 1500 LD and 2019 GMC Sierra 1500 Limited, 6'7" bed); Silverado HD / Sierra HD: 630320 (2020-2025 Chevrolet Silverado 2500 HD/Silverado 3500 HD and 2020-2025 GMC Sierra 2500 HD/Sierra 3500 HD, 6'10" bed); Colorado / Canyon: 630105 (2015-2022 Chevrolet Colorado and 2015-2022 GMC Canyon, 5'2" bed), 630130 (2015-2022 Chevrolet Colorado and 2015-2022 GMC Canyon, 6'2" bed); Ford F-150: 630112 (2015-2020 Ford F-150, 2021-2025 Ford F-150/F-150 Raptor, 2017-2020 Ford F-150 Raptor and 2022-2025 Ford F-150 Lightning, 5'7" bed), 630169 (2015-2020 Ford F-150 and 2021-2025 Ford F-150, 6'7" bed), 630284 (2004-2014 Ford F-150, 5'7" bed), 630285 (2004-2014 Ford F-150, 6'7" bed); Nissan Titan: 630115 (2017-2024 Nissan Titan, 5'7" bed), 630172 (2017-2024 Nissan Titan, 6'7" bed), 630293 (2017-2024 Nissan Titan, 5'7" bed), 630294 (2017-2024 Nissan Titan, 6'7" bed); Dodge / Ram: 630117 (2009-2010 Dodge Ram 1500, 2011-2018 Ram 1500 and 2019 Ram 1500 Classic, 5'7" bed), 630137 (2009-2010 Dodge Ram 1500, 2011-2018 Ram 1500, 2019 Ram 1500 Classic, 2010 Dodge Ram 2500/3500 and 2011-2021 Ram 2500/3500, 6'4" bed), 630298 (2019-2025 Ram 1500, 5'7" bed), 630299 (2019-2025 Ram 1500, 6'4" bed); Toyota Tacoma: 630286 (2016-2023 Toyota Tacoma, 5'1" bed), 630288 (2016-2023 Toyota Tacoma, 6'2" bed), 630345 (2024-2025 Toyota Tacoma, 5' bed); Toyota Tundra: 630116 (2014-2021 Toyota Tundra, 5'7" bed), 630173 (2014-2021 Toyota Tundra, 6'7" bed), 630289 (2014-2021 Toyota Tundra, 5'7" bed), 630290 (2014-2021 Toyota Tundra, 6'7" bed), 630337 (2022-2025 Toyota Tundra, 5'7" bed), 630338 (2022-2025 Toyota Tundra, 6'7" bed); F-250 / F-350 Super Duty: 630400 (2008-2016 Ford F-250 Super Duty/F-350 Super Duty and 2017-2022 Ford F-250 Super Duty/F-350 Super Duty, 6'10" bed); Ford Ranger: 630303 (2019-2023 Ford Ranger, 5'1" bed), 630342 (2024-2025 Ford Ranger/Ranger Raptor, 5' bed); Ford Maverick: 630331 (2022-2025 Ford Maverick, 4'6" bed).
Not for: trucks with RamBox or the 60/40 Multifunction Tailgate, which LEER says the Latitude will not work with.
About LEER
Based in Elkhart, Indiana, LEER builds truck caps and tonneau covers. LEER backs them with its own limited warranty; for any claim, contact us and we handle it with LEER.
In the LEER tonneau line, the Latitude is the soft tri-fold cover, alongside the SR250 soft roll-up cover and the HF350M and HF650M hard folding covers.
Buying LEER from Prestige Truck. Keep your Prestige Truck order email with your records: LEER asks for the original sales receipt as proof of purchase on a Latitude claim. For registration, replacement parts or a claim, contact us with your order number and we will work with LEER for you.
Frequently Asked Questions
Which trucks does the Latitude cover?
LEER builds Latitude versions for the Chevrolet Silverado and GMC Sierra (1500 and 2500 HD/3500 HD), Colorado and Canyon, Ford F-150, Super Duty, Ranger and Maverick, Ram 1500 and 2500/3500 and older Dodge trucks, Nissan Frontier and Titan, and Toyota Tacoma and Tundra. Each version page lists its exact years and bed.
How do I pick the right version?
Match your model year, truck and bed length to one version, then check its notes for bed rail systems such as Utili-track or the deck rail, and for tailgate notes.
Is the Latitude waterproof?
LEER bevels the edges so rain runs off, and the perimeter seals are cushioned, with fabric extensions, to sit tight against the bed. It is not sold as waterproof, so wrap anything that must stay completely dry.
Does the tailgate have to be up to close the cover?
No. LEER says the Latitude shuts over the bed whether the tailgate is up or down, which helps when a long load hangs past the tailgate.
Can I haul cargo taller than the bed sides?
Not under the closed cover: LEER's warranty excludes a panel hinge bent too far, which usually comes from tall cargo under a closed cover. For travel with the cover open, LEER's manual shows the cover folded all the way forward with the two middle-section straps hooked to the clips on the front rail, and it says never to drive with the cover partly open.
Do I have to drill the bed rails to fit it?
No. The Latitude clamps to the bed rails with no drilling. The hardware package has 2 rear clamp assemblies, 2 front twist-knob clamp assemblies and the 2.5mm and 5mm Allen wrenches.
Installation
- 2.5mm Allen wrench
- 5mm Allen wrench
Here's the short version. Follow LEER's install sheet (below) for the exact positions and hardware.
- Wash the truck bed if dirty, set the folded cover over the cab end of the bed, then unfold it and adjust its position for proper cab-to-tailgate alignment.
- Line the cover up at the front and side to side, then carefully refold it without shifting its position on the bed.
- Anchor the front panel and fit the secondary clamps with security buckles: choose the insert that best aligns the clamp to the bed side, position the clamp under the bed-wall flange (or on the bracket assembly), hand-tighten until it contacts the rail, then two more turns.
- With the front clamps secure, close the cover completely. Place each rear clamp under the bed rail, hand-tighten the flower nut until contact, then tighten both 5mm Allen screws (the flower nut may then be removed and kept).
- Adjust the strike plate and the CYNC latch one side at a time: loosen both set screws, slide the catch to touch the striker plate (add a wrench width of clearance if the cover closes too hard), tighten the latch-guide set screw, pull the inner latch until it has tension and tighten its set screw; repeat on the other side.
- Before driving, the cover must be completely flat and secured with all clamps fastened; never drive with the cover partly open.
Stuck on a step?
Specifications
| Brand | LEER |
|---|---|
| Series | LEER Latitude |
| Cover style | Soft tri-fold (folding) tonneau cover |
| Cover material | Reinforced commercial-grade vinyl, double-coated, flexible cross-weave backing |
| Frame | Self-tensioning frame system |
| Latch | CYNC latch, two-finger release from either side of the bed |
| Hold-downs | Adjustable cover buckles plus security buckles |
| Corners | Rounded, reinforced, double-stitched |
| Seals | Cushioned perimeter seals with fabric extensions; beveled edges |
| Mounting | Clamps to the bed rails, no drilling |
| Tailgate | Closes with the tailgate open or shut |
| In the box | Soft cover assembly and hardware package |
| Hardware package | 2 rear clamp assemblies, 2 front twist-knob clamp assemblies, 2.5mm and 5mm Allen wrenches |
| Coverage | 36 truck-specific versions |
More media
4 videosWarranty, shipping & returns
-
Warranty
The Latitude carries LEER's Limited Lifetime Warranty: LEER promises the cover is free of material and workmanship defects, and the coverage lasts as long as the original purchaser keeps it on the original truck.- Who and where: the original retail purchaser only, on the original owner's truck. The warranty is not transferable.
- Conditions: the cover must be properly installed and not modified, and LEER asks for the original sales receipt as proof of purchase.
- Remedy: LEER repairs or replaces a cover that proves defective, at its sole discretion.
- Not covered: damage caused by accidents, neglect or abuse, by inappropriate use or a faulty install, or by acts of God; a cover lost off the truck to wind or while driving (checking the clamps before you drive is the owner's job); paint damage to the truck; damage from careless unpacking, such as opening the carton with a box cutter; a panel hinge bent too far, usually from hauling cargo taller than the bed sides with the cover closed; use outside the cover's specifications or intended application; installing or operating it against the manual; and consequential damage, including to cargo or the truck bed.
- Shipping damage: LEER excludes damage caused by a parcel carrier in transit, so tell us right away and we will file the claim with the carrier.
- Care: clean with mild soap and water only. LEER says chemicals and harsh fluids can damage the vinyl and seals and void the warranty.
- Registration: LEER's manual says the cover must be registered for the warranty to be valid. Contact us and we will help you register it.
- To start a claim, contact us with your order number and photos and we will take it up with LEER for you.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
Open the carton without a blade, then check the cover assembly and the hardware package (rear clamps, front twist-knob clamps and both Allen wrenches) against the parts list in LEER's manual before you start. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.