So far so good ??
Much beefier than the stock one. I would recommend
Recent searches
Popular searches
Popular right now
TruXedo Lo Pro Soft Roll-Up Tonneau Cover for 1967-1972 Chevrolet C/K 1500/2500 / GMC C/K 1500/2500 (8' Bed)
$569.99
TruXedo Sentry CT Hard Roll-Up Tonneau Cover for 2019-2026 Chevrolet Silverado 1500 / GMC Sierra 1500 (6'7" Bed)
$1,379.99
TruXedo Sentry Hard Roll-Up Tonneau Cover for 2009-2024 Ram 1500 and 2010-2026 Ram 2500/3500 (6'4" Bed)
$1,279.99
UnderCover Elite One-Piece Tonneau Cover for 2022-2026 Toyota Tundra (5'7" Bed, with Deck Rail System)
$1,449.99
Recent searches
Popular searches
Popular right now
TruXedo Lo Pro Soft Roll-Up Tonneau Cover for 1967-1972 Chevrolet C/K 1500/2500 / GMC C/K 1500/2500 (8' Bed)
$569.99
TruXedo Sentry CT Hard Roll-Up Tonneau Cover for 2019-2026 Chevrolet Silverado 1500 / GMC Sierra 1500 (6'7" Bed)
$1,379.99
TruXedo Sentry Hard Roll-Up Tonneau Cover for 2009-2024 Ram 1500 and 2010-2026 Ram 2500/3500 (6'4" Bed)
$1,279.99
UnderCover Elite One-Piece Tonneau Cover for 2022-2026 Toyota Tundra (5'7" Bed, with Deck Rail System)
$1,449.99


Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Fits the same truck
A centered, solid axle drives straighter on the highway and stays better controlled on uneven ground.
Straight answers on specs, fit and support
It locates a solid axle side to side under the vehicle. When the vehicle is lifted, the factory bar pulls the axle off center.
An adjustable bar lets the axle be centered at your ride height, which a fixed factory bar cannot do.
A properly centered, stronger track bar can reduce wander and vague steering. Worn tie rods and ball joints should also be inspected.
Each bar lists the lift range it is designed for, such as stock to a stated height. Check the listing for your vehicle.
Plan on it. ReadyLIFT notes the vehicle may need an alignment, a headlamp aim check and an ADAS check after installation, and those services can add cost.
The ReadyLIFT no-hassle warranty covers the original purchaser against broken, missing or defective parts, with wearable components such as bushings and joints covered for up to 1 year.
4.7 · 10 reviews
Much beefier than the stock one. I would recommend
This fit perfectly, great product on a smaller budget for upgrades to Jeep. I replaced the Shocks, Drag Link and Tie Rods at the same time, it all took me about 4hours.
Perfect fit and finish. I can really feel the difference.
installed easy, fit nicely and seems to be better than the factory bars
Took me just under an hour to install. I had to remove the passenger side tired to use a breaker bar to get the axle bolt off. Install was simple and easy. I can feel a difference in how the Jeep handles when driving. The only concern I have is how close the bar is to my aftermarket diff cover. There is about a quarter of an inch from them touching one another.
Great product fit great now onto the rest of the steering! Jeep on!
When I purchased this item it arrived quickly. Customer Service was great! Once installed my death wobble problems were solved!
the adjustable feature on the bar is easy to use and worked great with lift kit
I’ve had this installed for a little over a year and yes it’s much better than the stock one, made the steering not feel floaty at all on and off-road. But not much of a difference for strength. Bent the original one tapping a tree and did the same with this one, on the same exact tree too, the odds… Based off my experience, I’d say it’s great for the street and light trails, but be gentle if you do anything technical. Make sure you’re looking for a track bar with really thick diameter tubing, this one is only 1/4”? Maybe a little thicker. It helped for the streets but the second it got some load on it, it bent straight up and threw the steering wheel 180°.
I thought this had an adjusting sleeve so it could be adjusted without removing it from the axle bracket, but it only has a couple flats on the bar itself. But, otherwise it's a nice heavy duty track bar. Bushings are solid. Manufacturers of these need to make an option for these bushings to accept a 5/8 inch bolt for applications where the brackets have been worn out due to wobble.