TruXedo Pro X15 TS Soft Roll-Up Tonneau Cover for 2007-2013 Chevrolet Silverado 2500/3500 / GMC Sierra 2500/3500 (8'2" Bed)

$719.99
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear

Flash Sale Ends in--:--:--

Free gifts included with your order

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

Features

  • Built-In T-Slot Rails: Both side rails carry a T-slot channel, so compatible racks, cargo holders, tents and similar accessories (all sold separately) slide in from the tailgate end and mount above the bed. Supplied T-slot end plugs, set with the included 1/8" Allen wrench, close the slots. TruXedo calls it the only soft cover built for truck racks.
  • Ultra Low Profile: Adding the slots doesn't raise the cover. The rails keep the X15's 15-degree angle, so it closes nearly flush with the bed rails, a profile TruXedo puts about 33% lower than the Lo Pro.
  • Rolls Open to the Cab: Pull the trigger latch on the driver side rail, roll the cover up to the cab and hook both retainer straps when you need the full bed. Closing is the reverse: roll it back and press the rear header into the header stops until it clicks.
  • Clamp-On, No Drilling: Six clamps hold the rails to the bed with nothing drilled or cut, and TruXedo rates the install Level 1, typically under 30 minutes. On 2022 and newer Tundras with the deck rail system, the clamps fit into that rail instead.
  • Self-Adjusting Tension Control: TruXedo's DriveTight tension control, preset at the factory, keeps the RTxTechWeave canvas tight as temperatures swing. The canvas is a textured five-layer, 120-grade composite, and spring plungers at the front header allow a small manual adjustment if it is ever needed.
  • Sealed at Front, Rear and Sides: Adhesive front corner seals, end plug seals at both ends of each rail, a front header seal that sits on the bulkhead and, on select trucks, a bulkhead seal work with RTxGrip hook-and-loop along both sides. TruXedo's sheet states plainly that the cover is not airtight.

Description & Fitment

This rack-ready Pro X15 TS is made for the 8'2" (97.6") bed of the 2007-2013 Chevrolet Silverado 2500/3500 / GMC Sierra 2500/3500. Racks, cargo holders and tents, all sold separately, slide into the T-slots from the tailgate end, and the supplied end plugs close them off. One more check for the TS: only dual rear wheel trucks that have factory bed rail caps are covered. It clamps on with no drilling or cutting, and TruXedo puts the install under 30 minutes. Hook-and-loop RTxGrip strips hold the edges, and DriveTight keeps the middle tight. The canvas is TruXedo's RTxTechWeave, a five-layer textured composite at 120 grade. It carries a limited lifetime warranty from TruXedo, fabric included.

Fitment & Compatibility

Chevrolet
Years Model Bed Notes
2007 Silverado 2500 HD 8'2" (97.6") New Body, Dually, with Factory Rail Caps
2008-2013 Silverado 2500 HD 8'2" (97.6") Dually, with Factory Rail Caps
2007 Silverado 3500 HD 8'2" (97.6") New Body, Dually, with Factory Rail Caps
2008-2013 Silverado 3500 HD 8'2" (97.6") Dually, with Factory Rail Caps
GMC
Years Model Bed Notes
2007 Sierra 2500 HD 8'2" (97.6") New Body, Dually, with Factory Rail Caps
2008-2013 Sierra 2500 HD 8'2" (97.6") Dually, with Factory Rail Caps
2007 Sierra 3500 HD 8'2" (97.6") New Body, Dually, with Factory Rail Caps
2008-2013 Sierra 3500 HD 8'2" (97.6") Dually, with Factory Rail Caps

Check your bed: run a tape along the top of the bed rail, bulkhead to the inner face of the shut tailgate. This TS part is labeled 8'2", which is 97.6". Some catalogs list the same box as 8'.

Not for: Trucks with single rear wheels and without factory rail caps (1271616), the 6'7" box (1271116), the 2014-2019 Chevrolet Silverado 1500 / GMC Sierra 1500 and 2015-2019 Chevrolet Silverado 2500/3500 / GMC Sierra 2500/3500 (1272216) or the 2019-2026 Chevrolet Silverado 1500 / GMC Sierra 1500 and 2020-2026 Chevrolet Silverado 2500/3500 / GMC Sierra 2500/3500 (1272816). Racks and other T-slot accessories are not included.

About TruXedo

TRUXEDO

TruXedo builds soft and hard roll-up tonneau covers.

The TS is TruXedo's rack-ready soft roll-up: the Pro X15's canvas, tension system and low rails, with T-slot channels built into both rails so accessories can mount above a covered bed. The rack is your choice and a separate purchase.

Authorized TruXedo dealer. TruXedo's position: buy from an authorized dealer and the cover is eligible for the full manufacturer's warranty; buy through eBay or another unauthorized seller and it may not be covered. We are an authorized TruXedo dealer, so your Pro X15 TS ships new and genuine, with its full limited lifetime warranty.

Frequently Asked Questions

Is this the right Pro X15 TS for my Silverado or Sierra?

It is, for a 2007-2013 Chevrolet Silverado 2500/3500 / GMC Sierra 2500/3500 whose bed is 8'2", measured along the rail from the bulkhead to the shut tailgate (97.6"). Other setups need another part: trucks with single rear wheels and without factory rail caps (1271616), the 6'7" box (1271116) or the 2014-2019 Chevrolet Silverado 1500 / GMC Sierra 1500 and 2015-2019 Chevrolet Silverado 2500/3500 / GMC Sierra 2500/3500 (1272216).

How can I tell my bed is the 8'2" box?

Tape it along the rail from the bulkhead to the shut tailgate. This TS part is the 8'2" box, and the 6'7" box TS part 1271116 is the alternative for this truck.

Does it come with a rack?

No. The Pro X15 TS gives you the T-slot rails and four end plugs; racks, crossbars, cargo holders and tents are separate purchases. Slide the accessory in from the rear of the rails, then refit the rear end plugs and tighten their set screws with the supplied 1/8" Allen wrench.

Which racks and accessories work with the T-slots?

TruXedo's T-Slot Accessory Fitment Guide rates 19 accessories for this cover: 5 work with full cover function (Yakima Eyebolts and LoadStop T-Slot, the Billie Bars hardware kit, and the Elevate Rack and Elevate Base Rack), 5 fit the slots but stop the cover from operating, and 9 don't fit. Ask us which racks keep the cover working before you buy one.

How is it different from the regular Pro X15?

Same idea, different rails. Both use RTxTechWeave canvas, DriveTight tension and 15-degree low-profile rails; the TS rails add a T-slot channel for accessories and come with four T-slot end plugs. If you will never mount anything above the bed, the regular Pro X15 does the same covering job.

Is it waterproof?

TruXedo's sheet states plainly that the cover is not airtight. Its seals and hook-and-loop shed most rain and snow; clean the mounting spots with soap, water and isopropyl alcohol before the adhesive seals go on, and expect some water to pool on top after rain, since the cross bows are flat. It runs off once you drive.

Installation

Install time Under 1 hour
DifficultyLevel 1simple installation; TruXedo puts it under 30 minutes
TypeClamp-on, no drilling or cutting
Tools1/2" wrench or socket, flat-head screwdriver (1/8" Allen wrench supplied)plus a torque wrench for the 8 ft-lb setting, isopropyl alcohol and scissors or a utility knife

Here's the short version. Follow TruXedo's Pro X15 TS install sheet (below) for your truck's exact rail and seal positions.

  1. Seal the front corners. Make sure every mounting area is clean. Wash the bulkhead's front face with soap and water, wipe it with isopropyl alcohol and let it dry, then stick the two corner seals to the front corners and press them down evenly.
  2. Prep the T-slot rails. Clean the front end of each side rail the same way and stick on the front end plug seals. Push a T-slot end plug into the front of each rail and lock its set screw with the supplied 1/8" Allen wrench.
  3. Set and clamp the side rails. Lay the driver rail (it carries the trigger latch) inside the bed rail with its flange resting on the bed cap, front edge 3/8" back from the bulkhead. Fit three clamps from the middle out, about 8" in from each end, finger-tight so the teeth bite, then tighten with a 1/2" socket to 8 ft-lb (11 Nm). Keep the rail level with the bed cap: raise a clamp to tilt it up, lower it to tilt it down. Repeat on the passenger side.
  4. Seal the bulkhead and tailgate corners. If your kit has a bulkhead seal, clean the bulkhead's top edge and stick the seal across it from side to side, flush with the inside edge and tight against the rail end plug seals and bed cap, and trim the excess. Then clean the rear ends of both rails and stick on the rear end plug seals to keep water out at the tailgate corners.
  5. Attach and unroll the cover. Set the rolled cover on the rails at the cab with its front header seal resting on top of the bulkhead. Push both header guides into their locked spot until each one clicks, unhook the retainer straps and roll the cover to the tailgate. Seat the rear header in the header stops and rotate it down until it clicks.
  6. Finish and check. Pull the fabric flap over the hook track and press the loop strip in with your palms along both sides before you drive. Tension is set at the factory; if the cover feels loose, adjust the spring plungers in small steps during the warmest part of the day. Re-check the rail clamps after your first week of driving.

Stuck on a step? Ask our install experts

What's included
  • Cover assembly
  • Driver side rail
  • Passenger side rail
  • 6 clamps
  • Bulkhead seal (on select makes and models)
  • 4 T-slot end plugs
  • 2 front corner seals
  • 4 end plug seals (front and rear pairs)
  • 1/8" Allen wrench

Specifications

Specifications
BrandTruXedo
Part Number1271516
Cover TypeSoft roll-up with T-slot side rails
Accessory MountingT-slot channel in both rails; racks and accessories sold separately
T-Slot End Plugs4, set with the included 1/8" Allen wrench
Top SurfaceRTxTechWeave, 5-layer, 120-grade textured composite
FinishMatte black
Rail Angle15 degrees, near-flush profile
TensionDriveTight automatic tension control, factory preset
ClosureRTxGrip hook-and-loop; trigger latch on the driver side rail
MountingClamp-on, no drilling or cutting
RemovalQuick-release, tool-free
Tested Range-40°F to 180°F
InstallLevel 1, under 30 minutes
WarrantyLimited lifetime
Fits2007-2013 Chevrolet Silverado 2500/3500 / GMC Sierra 2500/3500, 8'2" box
Bed Length8'2" (97.6")
UPC845742020813

Warranty, shipping & returns

  • Lifetime Limited warranty

    The Pro X15 TS carries TruXedo's limited lifetime warranty, which covers defects in materials or workmanship.
    • Lifetime coverage applies to the hard parts, which TruXedo lists as rails, clamps and bows, and separately to the fabric.
    • Only the original purchaser is covered; it can't be passed to a later owner. Have your registration or a dated, itemized receipt on file; contact us for help registering your cover.
    • Conditions that keep it in force: clean with mild automotive soap and water, never silicone or petroleum conditioners; whenever the truck moves, the cover is either latched closed or fully rolled to the cab with both straps attached; no cargo pressing on the fabric; check the rail clamps a week after install and periodically after; don't roll it into the back glass or leave it resting on the cab; re-roll and re-strap it now and then if it stays open for long; brush off snow and ice before opening; take it off before any rear tow.
    • TruXedo decides whether to repair or replace a defective cover, tarp or hardware part, and may offer a newer model with similar form and function instead.
    • Before sending anything back, contact us: an RMA (Return Material Authorization) number from TruXedo is needed first. The original may have to be returned postage prepaid, and shipping is charged on repairs and replacements.
    • Excluded: accident damage, neglect, unforeseeable use, improper installation, improper servicing and other causes that aren't defects.
  • Free shipping

    Free delivery anywhere in the lower 48 states, no minimum.
    • Orders placed by 5 PM ET on a business day begin processing that day.
    • The cover goes out as a parcel in one long carton rather than freight on a pallet, so no delivery appointment is needed.
    • Most orders are delivered in 1-5 business days.
    • Tracking is emailed to you the moment it ships.
  • Inspect on delivery

    Your Pro X15 TS comes as a parcel in one long carton. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.

What our customers say

4.8 · 37 reviews

Photos from owners

+6
scott g. Verified
06/23/2026

the perfect solution

This is the perfect solution I was looking for. Needed a cover with crossbars to hold a rooftop tent and a bike rack. This works seamlessly!!

reuben g. Verified
05/12/2026

21 Honda Ridgeline

I purchased the soft roll up with T-slots and the elevate rack. Install was very easy, took about an 1 1/2hr but I went slow and have only installed one other soft cover before. I could see how it would be under an hour some someone more experienced. Very happy with the quality of the soft cover and the hook and loop velcro. The bars attached easily and seem sturdy. The only thing I needed was the 6 stock M6 screws for the trick bed. I will say that the cover release lever is on the left side and for the Ridgeline the tailgate will need to be dropped traditionally vs swinging it open to reach it, no biggie.

Rebecca S. Verified
02/23/2026

Love my Tonneau Cover and Rails

Easy to install, provide exactly what I was looking for!

Keith H. Verified
10/07/2026

Pro X15

Excellent quality and fit exactly how they said it would.

WilliamM
08/02/2025

Bed Cover

Great for the price. Continuously rolling it up or locking it down depending on the task of the day. Looks great, too.

Christopher S. Verified
07/27/2025

Chevy2025

looks great on the truck super easy install. Would I liked for it to come with a tailgate seal.

Jesse M. Verified
07/24/2025

Great Cover with T-Slots

Wanted a soft rollup with T-Slots for future use with a rack or other accessories. This had everything we wanted and the material is nice.

Robert N. Verified
10/04/2026

I'm very pleased

Installation was pretty straightforward. It rolls very easily from either side of the bed. The Tonneau design and manufacture is top drawer. Very good quality.

Mano C. Verified
08/30/2026

Gets the job done

Overall, install didn’t take too long but the design can be improved in a few areas. The front section didn’t fit great and I had to loosen and then retighten the tension screws to be able to get the mounting screws to attach. It was also tough to gauge where to place the extra rubber water strip so it didn’t interfere with the pad under the side rails. Finally, there is no way of adjusting how flat the side rails sit on the top of the bed cap. They tend to sit at an angle. This prevents a solid seal from forming underneath. I use the cover with cross bars most of the time so the weight of these helps to keep the side rails pushed down.

Mason O. Verified
07/11/2025

Great

Easy installation, looks good works good. I bought it because I wanted to put on a bed rack, but still wanted my bed covered. But I feel like that’s it could cost a little less

Keith L
02/26/2026

Truxedo Pro X15 soft roll-Up Tonneau Cover

I am very satisfied with this Tonneau Cover. Installation was very easy, 90% of the installation was by myself with only about a 1/2 hr. help needed from my wife. I would have given 5 stars but the cover has a few minor ripples in it. I did install this on a 35 degree day and am hopeful the ripples will go away when its warmer and I can pull and stretch the fabric a little more. A little water does get in the bed at the tailgate but I expected that. I would recommend this cover and I would buy it again.

Justin S. Verified
09/02/2026

Great Tonneau Cover

Great cover for my 2023 Ridgeline. Looks great, super functional, easy to use, and pairs well with the elevate rack!

Osman R. Verified
08/17/2026

I love

I love I love I love it is great

Don K. Verified
08/02/2026

Excellent choice for 2026 Ford Maverick

The cover fits snuggly and was easy for my wife to install. The t-tracks allowed me to mount Yakima crossbars for our rooftop tent. I highly recommend.

Robert B. Verified
07/24/2026

Bang for buck.

About an hour install for one, clear instructions, looks great, minimum wind noise in cab with rear window open, good quality product. I have put this cover on four trucks. They hold up!

Michael R. Verified
07/23/2026

Rogersrider

Love it. Easy to install and looks fantastic.

John K. Verified
07/22/2026

Great cover!

Very impressed by how this product looks and performs. Has been in several rainstorms and car washes with no water in the bed. The cover was also super easy to install. Great product!

Jim Verified
02/01/2025

I like the look, but painful troubleshooting

Spent hours, would not latch shut with the tailgate up on 2023 Ford F150 6. 5 bed. Turns out, the ridges on the bed side caps stopped about a foot before the end, which then would every so slightly warp the rails lower near the end. I eventually bought some rubber adhesive strips to compensate for that difference. I shouldn't have to do that nonsense to make this fit. Also the rubber seals on the latching end are warped on both ends and don't seem durable. For how much it is, I would expect more.

Jerry H. Verified
07/22/2026

I really like the cover,

I really like the cover, and really glad I bought it

Isaac P. Verified
06/10/2026

Great cover with rail integration

Love the T rail integration, cover low profile and nice high end canvas material. Added rail accessories easily.

Rhonda G. Verified
05/28/2026

Tonneau cover w/slot rails

Love the look of this cover! I accidently ordered this. My original cover did not have slot rails, however i am so glad i got this one.

Christopher E. Verified
05/17/2026

Solid Construction and Simple Installation

Like the construction and quality of the materials. Was easy to attach to truck bed. Have a 26 GMC Sierra 2500HD AT4. The only item to mention was the cab side bed foam was twisted and was hard to apply to the bed.

Richard B. Verified
11/30/2025

X 15 ts soft roll up

Not so good ! All 4 corners leak It’s not possible to put things in the bed of my truck that you want to keep dry This is a very expensive tonneau that I would rate at “0” stars

James P. Verified
11/12/2025

my first tonneau ever

I spoke with a sales rep who was very helpful in making a final decision. Fast shipping. the directions were well illustrated. And it does look pretty good.

Eric L. Verified
08/02/2025

Nice cover

Love how low profile and the side rails have the T track to allow the use of elevated racks to be used.

Bruce L. Verified
07/23/2025

Great Rack…but…

Very well made and looks great. However, there’s no way to use locking nuts to secure the rack to the truck. The space only allows for the 5/16” cap nuts and nothing larger in diameter like a locking nut. Too easy to steal. Otherwise, it’s a well made accessory.

Andrew C. Verified
06/24/2025

All you need

Was considering a hard roll up or retractable but settled on the soft roll up. My thought is if someone wants what's in my bed they will get it. I avoid leaving anything in the bad anyways. Those other covers are double and triple this one cost to do the same job with more bulk. Sleek look reasonable price. No one knows of you have something or not. I live in Flint Michigan and have no concerns of someone cutting into my cover to see if I have anything good inside. You probably shouldnt either.

Jeff S. Verified
04/01/2025

Great tonneau cover!

I chose the TruXedo Pro X15 rollup tonneau cover for my new F150 to pair with the Elevate Rack. The cover works really well, is much more durable than my last rollup cover and works seamlessly with the rack system. I highly recommend it!!

Michael C. Verified
03/25/2025

AWESOME TONNEAU!!!

The install was a easy. Even for a noob like me. Would recommend to anyone.

Richard T. Verified
03/17/2025

Great product works well

I had watched install videos and none covered the install for a ridgeline but the included papers covered it well. Install was easy, the only thing was the latch to open the cover was pre installed on the wrong side so look for that. Maybe an hour even with removing to move the latch and it works great, looks great and does what I need.

Bill B. Verified
02/25/2025

Tonneau cover

So far so good. Installed easy. Looks good.

Patrick D. Verified
02/14/2025

Very Happy With My purchase

The cover is high quality and looks great on my truck. A little tricky for me to put on but did so and I’m glad I didn’t pay someone to install the cover.

James K. Verified
02/04/2025

Perfect.

Bought this for my 2025 Maverick Lariat. Product arrived when they said it would. No damage. Instructions easy to follow. Fits and works perfectly. Impressed with the seal at the tailgate - well designed. Being able to quickly removed the entire cover is huge plus. When crossing the Mackinac Bridge in very high winds they make you remove tonneau covers and have an empty truck bed. Easy to do with this feature. Suggestion - the seal on the underside of the t rail extended out a bit from the rail at the rear - interfering a bit with the trapezoidal seals you add after installing the rails. Trimmed excess off easily.

JOHN I. Verified
01/21/2025

The fit was excellent and

The fit was excellent and quality for the money.

Travis L. Verified
01/12/2025

X15 roll-up with T-slots

Very easy to install. Took about 30 minutes by myself. Added my ski rack and other accessories. The Rhino rack system worked out of the box and looks great. Highly recommend

Chris A. Verified
09/30/2026

Pro X15 Roll-up Tonneau

This is my 3rd Pro X15. It does a good job protecting items in the bed, but it is not totally waterproof. Tailgate seal has been updated since my last cover, and now you close the tonneau before closing the tailgate. Super easy install. Mine arrived with tailgate seal slightly deformed but still functional, otherwise I’d give it 5 stars across the board.

Paul M. Verified
12/09/2025

Very nice but leaks a bit

I purchased the soft T-cover with T-slot rails and the adjustable racks. It took about a half day to install them. They all look to be good quality and the installation was straight forward. The only issue has been that the cover appears to be about a half inch short for my 2021 6-foot 1-inch Ranger SuperCab, as the cover slightly overlap the inner edges of the forward rail and tailgate when deployed. That means that I get a few drops to a half cup of water whenever there is significant rain. I added an extra length of weather stripping aft, but there is still a little leak.

Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question