Sort screws, fittings, connectors and every other small part into their own home with the Weather Guard 9909-3-02 parts cabinet. Nine tilt-out plastic bins ride in a compact Brite White steel case, so a full assortment of fasteners and hardware stays organized and visible instead of rattling loose in a bucket. Hook-and-loop fasteners hold each bin in place through hard stops and rough roads, then release so you can pull a bin out and carry it to the work. It is about 17" wide and mounts to 13" or 16" deep Weather Guard shelving with the matching bracket, so it drops neatly into an organized van wall of small-parts storage.
What's Included:
9909 Series parts cabinet in Brite White steel
Nine tilt-out plastic parts bins
Hook-and-loop fasteners to hold the bins in place
Weather Guard installation instructions
Features
Nine Bins for Small Parts Nine tilt-out plastic bins give screws, fittings, connectors and other small hardware their own labeled homes, so you can grab the right part fast instead of digging through a bucket.
Bins Stay Put, Then Come With You Hook-and-loop fasteners hold each bin in place so nothing spills on hard stops or washboard roads, then release so you can pull a bin out and carry it to the job. It is organization that travels.
Compact Steel Case A welded Brite White steel case keeps the whole assortment tidy in about 17" of width, so it packs a lot of sorted storage into a small slice of shelf space.
Brite White ARMOR TUF Powder Coat The steel case wears a Brite White ARMOR TUF powder coat that resists moisture, scuffs and grime and keeps the cabinet looking clean through years of van use.
Mounts to 13 or 16" Shelving The 9909 mounts to 13" or 16" deep Weather Guard shelving with the matching bracket (order Model 9993-3-01 for 13" shelves or 9996-3-01 for 16" shelves; brackets sold separately).
Fitment & Compatibility
Compatibility
Fit
13" deep Weather Guard shelving
✓ Yes, with Model 9993-3-01 mounting bracket (sold separately)
16" deep Weather Guard shelving
✓ Yes, with Model 9996-3-01 mounting bracket (sold separately)
Any specific van make, model, wheelbase or roof height
✗ Not applicable, this is a modular parts cabinet that mounts inside a Weather Guard shelving system, not to the van body
Mounting bracket included
✗ No, order the correct bracket for your shelf depth separately
Fit guidance: Fit is to the Weather Guard shelving system rather than to a specific van. The cabinet mounts to 13" or 16" deep Weather Guard shelving, but the mounting bracket is not included: order Model 9993-3-01 for 13" shelves or Model 9996-3-01 for 16" shelves. Confirm your shelf depth and add the matching bracket before ordering.
Specifications
Type: Parts cabinet with 9 tilt-out plastic bins
Bins: 9 removable plastic bins
Product Dimensions: about 17"W x 12"H x 11.63"D
Material: Welded steel case with plastic bins
Finish: Brite White ARMOR TUF Powder Coat
Bin Retention: Hook-and-loop fasteners keep bins in place
Mounting: Mounts to 13" or 16" deep Weather Guard shelving; bracket sold separately (9993-3-01 for 13", 9996-3-01 for 16")
Shipping Weight: About 23 lb
Product Weight: About 18.5 lb
Shipping Dimensions: About 18"L x 14.5"W x 14.5"H
Install Time: About 0.4 hours
Made In: China
Warranty: Weather Guard limited lifetime
Installation
Type: Bracket-mounts to Weather Guard shelving · Time: About 15 to 25 minutes with the bracket on hand · Tools: Ratchet and socket set · Difficulty: Easy with basic hand tools
Attach the correct mounting bracket for your shelf depth (9993-3-01 for 13" or 9996-3-01 for 16" shelving), then fasten the cabinet to the bracket so it sits level and the bins tilt freely. Press each bin onto its hook-and-loop pads so it holds in transit. Follow the Weather Guard installation instructions for exact placement.
Watch the installation walkthrough:
Warranty, Shipping & Returns
Warranty. Weather Guard limited lifetime warranty against defects in materials and workmanship.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
About Weather Guard
Weather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.
Known for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.
Backed by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.
Authorized Weather Guard dealer. Prestige Truck is an authorized dealer of Weather Guard, so every tool box, rack and storage product you buy is 100% genuine and factory-new, covered by the full Weather Guard manufacturer warranty, and backed by our own US-based support team.
Van Shelf Back Panels and Door Accessories Install
Weather Guard's step-by-step guide covers fitting the back panels and door accessories that turn an open van shelf unit into a closed, secure one. Back panels stop small parts dropping down behind the shelving, and the doors keep contents in place and out of sight.
It is the reference to use when you are adding to shelving you already own. Because it is the manufacturer's own video, it shows the correct fixing points and the order the parts go together.
Conquer the Chaos in Your Work Van
Weather Guard's own short film on van storage, built around the difference between a van you have to dig through and one where every item has a home. It shows the Weather Guard van range working as a single interior rather than as separate parts bolted in over time.
It is a useful orientation if you are planning an upfit and are not sure where to start. Because it is manufacturer content, the shelving, bins and flooring shown are the current Weather Guard line rather than an older catalog.
Installation Help for Your Van Accessories
Weather Guard made this video for anyone who would rather not tackle a van upfit alone. It covers the installation support Weather Guard offers on its van accessories and how to get a fitment question answered before it becomes a problem.
Watch it before you start if this is your first upfit. Knowing the support route in advance is usually what keeps a Saturday install from turning into a Monday phone call.
Frequently Asked Questions
Straight answers on specs, fit and support
How many bins does the 9909-3-02 have?
Nine tilt-out plastic bins, each a home for a different size or type of small part, screws, fittings, connectors and similar hardware, in one compact steel case.
Do the bins stay put while driving?
Yes. Hook-and-loop fasteners hold each bin in place so nothing spills on hard stops or rough roads, and the same fasteners release so you can pull a bin out and carry it to the work.
Does it come with a mounting bracket?
No. The mounting bracket is sold separately. Order Model 9993-3-01 for 13" deep shelves or Model 9996-3-01 for 16" deep shelves, matched to your Weather Guard shelving.
What does it mount to?
It mounts to 13" or 16" deep Weather Guard shelving with the matching bracket. As a modular cabinet it attaches to the Weather Guard system, not to the van body.
How big is it?
About 17" wide, 12" high and roughly 11.63" deep, so it packs nine sorted bins into a small slice of shelf space. It ships at about 23 pounds.
What is it made of?
A welded steel case with a Brite White ARMOR TUF powder coat and durable plastic bins, so the cabinet resists moisture and grime and holds up to daily van use.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
