Give a tall Mercedes-Benz Sprinter a full-height wall with the Weather Guard 96123-3-01 CabMax composite van bulkhead. Molded as a single piece for the 2019 and newer high-roof Sprinter, and fit for the 2025 E-Sprinter, it runs floor to headliner so a full sheet of shifting cargo or a loose ladder never reaches the cab. The tight composite seal keeps the cab warmer, cooler and quieter than an open van, the contoured profile preserves seat travel and storage room, and a floating floor angle lets it go in without drilling the floor. It is the premium, factory-look partition for the biggest Sprinter.
What's Included:
- Single-piece Weather Guard CabMax composite van bulkhead for the Mercedes-Benz Sprinter
- Floating floor angle base that adjusts to the van floor
- All required mounting hardware, no floor drilling
- Weather Guard installation instructions
- Optional window accessory (Model 96906-3-01) and Dog Hatch door accessory (Model 96908-3-01) sold separately
Features
Full-Height Wall For The High-Roof Sprinter
Molded for the 2019 and newer high-roof Mercedes-Benz Sprinter, this single-piece bulkhead runs floor to ceiling, so nothing in the tall cargo area can reach the driver in a hard stop.
Sealed For Comfort
The close composite fit holds heating and air conditioning in the cab and knocks down cargo and road noise, which matters on the long days a Sprinter usually runs.
Fits The Electric E-Sprinter Too
Coverage includes the 2025 E-Sprinter, so an electric Sprinter gets the same one-piece composite protection as the diesel.
Keeps Your Cab Space
A contoured profile is shaped to give back seat travel and storage room up front, so a full-height wall does not crowd the driver.
No-Drill, Accessory-Ready
The floating floor angle means no drilling into the floor, and molded accessory-panel locations plus an optional window let you tailor storage and sight lines.
Fitment & Compatibility
| Van |
Roof / Configuration |
Fit |
| Mercedes-Benz Sprinter |
High roof, 2019 and newer (incl 2025 E-Sprinter) |
✓ Yes, direct fit |
| Mercedes-Benz Sprinter |
Standard or mid-roof |
✗ No, order the bulkhead for your roof height |
| Other vans (Transit, ProMaster, Express/Savana) |
Any |
✗ No, this bulkhead is molded for the Sprinter |
Fit guidance: This CabMax composite bulkhead is molded for the 2019 and newer high-roof Mercedes-Benz Sprinter, including the 2025 E-Sprinter. It is roof-height specific, so confirm you have the high-roof Sprinter before ordering. It installs with no drilling thanks to the floating floor angle. Two sources agree (Meyer inquiry data plus the Weather Guard listing and dealer catalogs).
Specifications
-
Type: CabMax composite bulkhead (single piece)
-
Van: Mercedes-Benz Sprinter
-
Roof Height: High roof
-
Material: Composite
-
Finish: Matte white composite
-
Floor: Floating floor angle, fits all van floor types
-
Mounting: No drilling into the van floor, hardware included
-
Product Dimensions: About 13.1"D x 69.6"W x 77.5"H
-
Shipping Weight: About 86 lb
-
Product Weight: About 75 lb
-
Shipping Dimensions: About 76"L x 17"W x 75"H
-
Install Time: About 0.8 hours
-
Assembly Required: Yes
-
Warranty: Limited Lifetime
-
Made In: USA
Installation
Type: No-drill floating-floor install · Time: About 45 to 90 minutes · Tools: Socket or wrench set and a tape measure; no drilling into the van floor · Difficulty: Moderate, best with two people because the single-piece panel is large
Set the single-piece composite bulkhead into the Mercedes-Benz Sprinter cargo area behind the seats, let the floating floor angle settle to the van floor, then secure it to the van's body points with the included hardware. No drilling into the floor is required. Follow the Weather Guard installation instructions for placement and torque.
Watch the installation walkthrough:
Warranty, Shipping & Returns
Warranty. Limited Lifetime Warranty from Weather Guard against defects in materials and workmanship.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Weather Guard
Weather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.
Known for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.
Backed by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.
Authorized Weather Guard dealer. Prestige Truck is an authorized dealer of Weather Guard, so every tool box, rack and storage product you buy is 100% genuine and factory-new, covered by the full Weather Guard manufacturer warranty, and backed by our own US-based support team.
