The Weather Guard 11922 tie-down attachment points give you dedicated anchor points for strapping equipment and materials to your Weather Guard aluminum headache rack. Each one is a recessed ring-style anchor you can hook a strap, rope or bungee to, so you are not tying off to the rack tubing itself. This is a 2-pack of aluminum attachment points, and each one slides through the rack's accessory channel and locks in place with a bolt, so you can position them exactly where your load needs a tie-off. They fit only the Weather Guard aluminum modular headache racks (11902-52-01 Open Frame, 11908-52-01 Half Bar, 11904-52-01 Louvered and 11906-52-01 Hex) and not the older steel Protect-A-Rail cab protectors.
What's Included:
Two tie-down attachment points (one 2-pack)
Mounting bolt on each attachment point for the rack accessory channel
Features
Dedicated Anchor Points for Strapping Each attachment point gives you a recessed ring to hook a strap, rope or bungee to, so you get a clean, purpose-built tie-off instead of wrapping around the rack tubing. That makes securing tools, ladders and materials to the rack faster and tidier.
Slide Through the Accessory Channel and Lock Each anchor slides through the rack's accessory channel and locks down with a bolt, so you can move it along the rack and set it right where your load needs a tie-off. Loosen the bolt to reposition, then tighten it back down.
Sold as a 2-Pack You get two anchor points in the box, so you can add a tie-off on each side of a load or spread them along the rack. Two points cover most strap-down setups out of the package, and you can add more as needed.
Aluminum Build for the Rack The attachment points are made of aluminum to match the aluminum headache racks and stand up to weather and daily use. They are a compact, low-profile add-on that stays out of the way when you are not using them.
Fitment & Compatibility
Compatible Rack
Fit
Weather Guard 11902-52-01 aluminum Open Frame headache rack
✓ Yes
Weather Guard 11908-52-01 aluminum Half Bar headache rack
Fit guidance: This is an accessory, not a standalone product. The attachment points mount to the Weather Guard aluminum modular headache racks only (the 11902-52-01 Open Frame, 11908-52-01 Half Bar, 11904-52-01 Louvered and 11906-52-01 Hex) through the rack's accessory channel, and they are sold as a 2-pack. They do not fit the older steel Protect-A-Rail cab protectors. They give you an anchor point to strap to, but always rate and secure your load properly.
Specifications
Type: Adjustable tie-down anchor points for aluminum headache racks
Pack Quantity: 2-pack (two attachment points)
Adjustment: Slide through the rack accessory channel and lock with a bolt
Finish: Matte black steel with a red rubber surround
Product Dimensions: 3-1/4"L x 1/2"D x 2-1/2"H per anchor
Weight: About 0.4 lb per anchor (1 lb shipping for the pair)
Fits: Weather Guard aluminum headache racks, no separate mounting kit required
Made In: China
Installation
Type: Slide-in adjustable anchor points for the rack accessory channel · Time: About 5 minutes · Tools: Basic hand tools to tighten the bolt · Difficulty: Easy, no drilling into the truck or the rack
Slide each attachment point into the rack's accessory channel, move it to where you want the tie-off, and tighten the bolt to lock it in place. Position the anchors so your straps run at a good angle over the load. To move them, loosen the bolt, slide to the new spot, and retighten. Then run your straps to the anchor rings and cinch your load down.
Watch the installation walkthrough:
Warranty, Shipping & Returns
Warranty. Limited Lifetime Warranty from Weather Guard against defects in materials and workmanship.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
About Weather Guard
Weather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.
Known for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.
Backed by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.
Authorized Weather Guard dealer. Prestige Truck is an authorized dealer of Weather Guard, so every tool box, rack and storage product you buy is 100% genuine and factory-new, covered by the full Weather Guard manufacturer warranty, and backed by our own US-based support team.
Weather Guard Defender Series Truck Rack Install
Weather Guard's Defender Series install video shows the lightweight aluminum truck rack going onto a pickup with no drilling required. You see the compression clamps grip the bed rails and the crossbars set up to carry ladders, lumber and pipe, rated to about 800 pounds. It makes clear how quickly the rack mounts and how the ladder stops keep a load in place. It is a helpful look at the rack in place before you buy or install your own.
Weather Guard Steel Truck Rack Install
This official Weather Guard guide shows how to install a steel truck rack for hauling ladders, lumber and long loads over the bed. You watch the rack mount to the bed and get tightened down, with the load bars set for ladders and pipe. It gives a clear picture of how the rack goes on and how much it adds to a truck's hauling capability. It is the manufacturer's own reference for setting up the rack correctly.
Best Upgrade for Your Truck
This is Weather Guard's own brand film about outfitting a working pickup, built on the idea that the truck should already be loaded and organized before the day starts. It puts the bed and rail equipment in the context of a real work day rather than a spec sheet.
Watch it if you are still deciding how much storage a truck actually needs. It is the clearest short look at how Weather Guard boxes, racks and drawer units are meant to work together on one vehicle, and it comes straight from the manufacturer rather than a reseller.
Frequently Asked Questions
Straight answers on specs, fit and support
What are the 11922 attachment points for?
They are anchor points you add to a Weather Guard aluminum headache rack so you have a dedicated ring to strap equipment and materials to. Instead of tying off to the rack tubing, you hook your strap, rope or bungee to the recessed ring.
How do they attach and adjust?
Each attachment point slides through the rack's accessory channel and locks down with a bolt. Loosen the bolt to slide it to a new spot along the rack, then tighten it back down. No drilling is needed.
How many are in a pack?
Two. They are sold as a 2-pack, so you can put an anchor on each side of a load or space them along the rack, and add more sets if you need extra tie-off points.
Do they come with straps?
No. This part is just the attachment points, so no straps, ropes or bungees are included. You supply your own tie-downs and hook them to the anchor rings.
Which racks do they fit?
They fit the four Weather Guard aluminum modular headache racks: the 11902-52-01 Open Frame, 11908-52-01 Half Bar, 11904-52-01 Louvered and 11906-52-01 Hex. They do not fit the older steel Protect-A-Rail cab protectors.
What are they made of and are they covered?
They are made of aluminum to match the aluminum racks and hold up to weather and daily use, and they are backed by a Weather Guard Limited Lifetime Warranty. Always rate and secure your load properly when you use them.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
