Weather Guard PACK RAT Aluminum Drawer Unit, White, Single Drawer (310-3-01)

Get lockable, roll-out storage without the weight penalty of steel with the Weather Guard 310-3-01 Pack Rat aluminum drawer unit. This lightweight single-drawer unit stands about 17-3/4" tall on a compact 42 by 12" footprint, so it tucks into a truck bed or van and keeps a deep, full-extension drawer of tools rolling out to you. A One-Touch latch, a 12-volt power pass-through for charging cordless batteries and a Bright White ARMOR TUF finish make it a practical pick for contractors and mobile techs who watch every pound of payload.

What's Included:

• One aluminum Pack Rat roll-out drawer unit, bright white
• Full-extension drawer with adjustable dividers
• One-Touch latch assembly
• 12V power pass-through
• Mounting hardware
• Weather Guard installation instructions

Features

Lightweight Aluminum Build
The 310-3-01 is built from durable, lightweight aluminum, so you get rugged roll-out storage that adds far less payload than a comparable steel unit. It is a smart choice when weight matters as much as security.

225 lb Roll-Out Drawer
The full-extension drawer carries up to 225 pounds of tools and equipment and glides out on rollers so nothing gets buried against the bulkhead. The drawer compartment measures about 14-1/2" high, 11-3/4" wide and 39" long.

One-Touch Latch
A One-Touch latch assembly opens the drawer with one hand, so you can get in while your other hand is full, and holds the drawer closed on rough roads.

12V Power Pass-Through
A power pass-through lets you route a charging lead into the drawer, so cordless tool batteries can charge while you drive from job to job.

Anti-Skid Top, Stackable
Anti-skid strips across the top give work boots sure footing, and the unit can be stacked with additional Pack Rat units when you need more organized storage in the same footprint.

Bright White ARMOR TUF Finish
A Bright White ARMOR TUF powder coat resists rust, scuffs and fading for years of dependable service in a truck bed or van.

Fitment & Compatibility

Specifications

• Series: PACK RAT Aluminum Drawer Unit (Model 310-3-01)
• Configuration: 1 full-extension roll-out drawer with adjustable dividers
• Exterior Dimensions: 42"L x 12-1/4"W x 17-3/4"H
• Drawer Compartment: About 14-1/2"H x 11-3/4"W x 39"L
• Material: Aluminum
• Drawer Load Rating: 225 lb
• Roll-Out: Roller-mounted, full drawer extension
• Latch: One-Touch latch, one-hand operation
• Electrical: 12V power pass-through for in-drawer charging
• Top Surface: Anti-skid strips
• Finish: Bright White ARMOR TUF powder coat
• Mounting: Bolts down; stackable with additional Pack Rat units
• Made In: USA
• Warranty: Limited Lifetime
• Product Dimensions: 42"L x 12-1/4"W x 17-3/4"H
• Drawer Configuration: Single deep drawer
• Drawer Capacity: 225 lb
• Mounting Location: Floor

Installation

Type: Bolt-in, bed floor or van floor  ·  Time: About 30 minutes to 1 hour  ·  Tools: Drill and bits, wrench or socket set, tape measure, marker, zinc-rich primer  ·  Difficulty: Easy to moderate with basic hand tools

Set the unit in place, mark and drill the mounting holes, then bolt it down with the supplied hardware. Seal drilled holes with zinc-rich primer, especially on aluminum beds. Route the 12V pass-through lead to your power source if you plan to charge inside the drawer. When stacking, fasten the upper unit per the Weather Guard instructions.

Resources

Everything you need for your Weather Guard PACK RAT Aluminum Drawer Unit, White, Single Drawer, in one place.

• Official Weather Guard PACK RAT Aluminum Drawer Unit, White, Single Drawer installation manual (PDF), the manufacturer's step-by-step guide covering mounting, included hardware and torque specs.

Warranty, Shipping & Returns

Warranty. Limited Lifetime Warranty from Weather Guard against defects in materials and workmanship.

Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.

Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.

About Weather Guard

Weather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.

Known for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.

Backed by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.