The Weather Guard 234-3-01 is the full-size, dual-clamp Quick Clamp rack for older gutter-style vans, and it adds a smart twist: curved cross members that lower the point where you load and unload the ladder. On a tall full-size van that curve takes real height out of the lift, so a single tech can still swing a ladder up and close the gas-spring clamp without reaching over their head. It clamps on both the street and curb sides to carry two ladders, comes with a Weather Guard airfoil to cut wind noise and drag, and mounts to full-size vans with rain gutters or side channels like the GMC Savana, Chevrolet Express, and Ford E-Series. Lightweight aluminum with a Brite White ARMOR-TUF finish keeps roof weight down while the gas-spring clamps do the holding.
What's Included:
Quick Clamp aluminum van rack, dual-side clamps, for full-size gutter vans
Curved cross members that reduce the ladder load height
Two gas-spring-assisted clamps (street and curb side)
Weather Guard airfoil
Stainless steel mounting hardware
Weather Guard installation instructions
Features
Curved Cross Members Lower The Lift The cross members are curved to reduce the height at which you load and unload the ladder. On a tall full-size van that lower loading point is what keeps a single tech from having to press a ladder overhead.
Dual Gas-Spring Clamps Clamps on both the street and curb sides carry two ladders. Lean, swing, and close, the spring assist does the work, so both ladders load fast and strap-free, one at a time.
Airfoil Included A Weather Guard airfoil comes with the rack to cut wind noise and reduce drag at highway speed, which also helps protect fuel economy on a big van that runs all day.
For Full-Size Gutter Vans It mounts to full-size vans with rain gutters or side mounting channels like the GMC Savana, Chevrolet Express, and Ford E-Series. It is not recommended for vans without side mounting channels or gutters, so add the accessory center support 233-3-01 for extra capacity.
Light Aluminum, Weatherproof Finish Lightweight aluminum keeps roof weight down on a full-size van, and the Brite White ARMOR-TUF powder coat with stainless steel hardware stands up to rain and road salt for years of daily use.
Fitment & Compatibility
Van
Configuration
Fit
GMC Savana / Chevrolet Express
Full-size van with rain gutters
✓ Fits, mounts to the gutters or side channels
Ford E-Series (Econoline)
Full-size van with rain gutters
✓ Fits, mounts to the gutters or side channels
Vans without gutters or side mounting channels
No factory gutter or channel
✗ Not recommended
Fit guidance: This is the full-size dual-clamp Quick Clamp rack with curved cross members and an included airfoil, built for older full-size vans that have rain gutters or side mounting channels (GMC Savana, Chevrolet Express, Ford E-Series). It is not recommended for vans without side mounting channels or gutters. Check your van roof load rating and the cross-member spacing before carrying heavy or long ladders, and add the 233-3-01 center support for extra capacity. For newer low-roof Transit or NV vans, use the 234-3-03 instead.
Specifications
Series: Quick Clamp (curved cross member)
Configuration: Dual side (street and curb) clamps
Fits Vans: Full-size vans with rain gutters or side channels
Cross Members: Curved, to reduce load height
Airfoil: Included
Loading: Gas-spring-assisted clamps, one-person operation, one ladder per side
Expandable: Add center support 233-3-01
Material: Aluminum
Finish: Brite White ARMOR-TUF powder coat
Hardware: Stainless steel
Approx. Dimensions: about 74"L x 25"W x 12"H
Shipping Weight: About 76 lb
Product Dimensions: About 86.5"W x 99"D x 16"H
Product Weight: About 72 lb
Shipping Dimensions: About 73.5"L x 25"W x 11.5"H
Install Time: About 1.3 hours
Assembly Required: Yes
Warranty: Limited Lifetime
Made In: China
Installation
Type: Roof mount clamping to van rain gutters or side channels · Time: About 1.5 to 2.5 hours · Tools: Socket and wrench set, tape measure · Difficulty: Moderate, two people recommended
Position the rack on the gutters or side channels, set the cross-member spacing for your ladders, and tighten the mounting hardware evenly so it sits flat. Fit the airfoil to the front cross member. Cycle both gas-spring clamps empty to confirm they open and hold before loading. Follow the printed Weather Guard instructions for placement and torque.
Watch the installation walkthrough:
Warranty, Shipping & Returns
Warranty. Weather Guard Limited Lifetime Warranty against defects in materials and workmanship.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
About Weather Guard
Weather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.
Known for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.
Backed by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.
Authorized Weather Guard dealer. Prestige Truck is an authorized dealer of Weather Guard, so every tool box, rack and storage product you buy is 100% genuine and factory-new, covered by the full Weather Guard manufacturer warranty, and backed by our own US-based support team.
Compare The Range
How this compares to similar models
The closest alternatives side by side, so you do not have to keep tabs open.
Model
This OneWeather Guard Quick Clamp Van Ladder Rack, Dual Side, Full-Size Gutter Vans, Curved Cross Members (234-3-01)
A companion look at the broader Weather Guard van upfit system, folding shelves, rigid flooring, and locking bins, that pairs with your Quick Clamp ladder rack when you build out a full-size work van inside and out.
Glidesafe Load Assist Install Guide
Weather Guard's step-by-step guide covers installing the Glidesafe load assist on a van rack. Glidesafe is the assist mechanism that takes the weight and the awkwardness out of getting a ladder up onto and back down off the roof.
It is worth watching even if you are not adding the assist yet, because it shows how the rack and the load-handling hardware bolt together. Coming from Weather Guard itself, it is the most reliable reference for fitting the accessory correctly.
Installation Help for Your Van Accessories
Weather Guard made this video for anyone who would rather not tackle a van upfit alone. It covers the installation support Weather Guard offers on its van accessories and how to get a fitment question answered before it becomes a problem.
Watch it before you start if this is your first upfit. Knowing the support route in advance is usually what keeps a Saturday install from turning into a Monday phone call.
Frequently Asked Questions
Straight answers on specs, fit and support
What do the curved cross members do?
They lower the height at which you load and unload the ladder. On a tall full-size van that lower loading point lets a single tech swing a ladder up and clamp it without reaching overhead.
Which vans does the 234-3-01 fit?
Full-size vans with rain gutters or side mounting channels, like the GMC Savana, Chevrolet Express, and Ford E-Series. It is not recommended for vans without gutters or side channels. Newer low-roof Transit or NV vans should use the 234-3-03.
Does it carry two ladders?
Yes. Gas-spring-assisted clamps on both the street and curb sides carry a ladder on each side, loaded one at a time with the same quick lean-swing-clamp move.
Does it come with an airfoil?
Yes. A Weather Guard airfoil is included to cut wind noise and reduce drag at highway speed, which also helps protect fuel economy.
Can I add more capacity?
Yes. Add the Weather Guard 233-3-01 center support to reinforce the rack for heavier or longer loads.
What is the finish and warranty?
It is lightweight aluminum with a Brite White ARMOR-TUF powder coat and stainless steel hardware, backed by the Weather Guard Limited Lifetime Warranty against defects in materials and workmanship.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)