The Worksport NEXUS hard folding tonneau cover pairs black aluminum panels with an auto-latching flip-up design that opens the full bed from one side. A perimeter seal and full-length rail seals help keep weather out with no drain tubes in the bed. Part number 4841251 fits the 2017-2025 Honda Ridgeline with the 5' bed.
What's Included:
- Worksport NEXUS hard folding tonneau cover
- Driver rear rail bracket
- Passenger rear rail bracket
- Front rail brackets (2)
- Center rail brackets (2)
- Flange nuts (8)
- Female buckle kit (2)
- Retention knob assembly kit
- Retainer bracket kit
- Foam filler (2)
- Packed as Worksport hardware kit #103101
The cover ships with the mounting hardware for its application; factory rail systems, bed caps and any tailgate or bed equipment named in the fitment notes are not included.
Features
Full Bed Access From One Side
Fold the panels forward and lift the cover, and the Active Lock catches and holds it upright automatically. The whole bed opens without walking around the truck or setting a prop rod.
Keeps the Panels Off the Cab
Because the Active Lock holds the raised cover in place, the panels do not rest fully against the cab, which helps protect the paint.
Cable-Operated Quick Latches
A cable release opens the latches together, and Worksport lists eight latching points holding the closed cover to the rails.
Formed Aluminum Panels, DiamondShield Finish
Each panel is formed from a single aluminum sheet with a reinforcing crossbar and no foam filler. The panels carry Worksport's black DiamondShield coating, which the brand describes as scratch and UV resistant.
Dual-Lock Perimeter Sealing
A full perimeter seal works with seals running the length of each rail to keep rain and dust out of the bed. No drainage rails or tubes take up room in the cargo area.
Rated for 400 lb Evenly
Worksport rates the closed cover to hold up to 400 lb when the weight is spread evenly. The brand's warranty still advises against carrying items on top of the cover, so keep cargo in the bed.
Three Positions for Driving
The cover can ride closed, folded or flipped up, which leaves room for tall loads. Fasten it firmly in whichever position you choose and keep speeds moderate while it is open.
Manufactured in the United States
Worksport states that NEXUS covers are manufactured in the United States.
Fitment & Compatibility
Fit guidance: Fits the 2017-2025 Honda Ridgeline with the 5' bed. Measure the bed floor from the bulkhead to the closed tailgate if you are unsure which bed you have.
Specifications
-
Brand: Worksport
-
Series: NEXUS
-
Cover Style: Hard folding, auto flip-up
-
Bed Access: Full bed
-
Riding Positions: Closed, folded, flipped up
-
Panel Material: Formed aluminum
-
Finish: Black DiamondShield
-
Latching: Cable-operated quick latches, 8 latching points
-
Weather Seals: Perimeter bulb seal plus full-length rail seals
-
Load Rating: Up to 400 lb, evenly distributed
-
Country of Origin: USA (domestic and imported parts)
-
Warranty: 3-year limited
-
Fits: 2017-2025 Honda Ridgeline
-
Bed: 5' bed
-
Hardware kit: #103101
-
Shipping weight: 80 lb
-
Part number: 4841251
Installation
Type: Rail-mounted hard folding cover · Install: Hand tools, hardware included · Afterward: Check fasteners and latches before driving
Follow the Worksport install guide for this truck and check every fastener and latch before the first drive. Recheck the fasteners regularly and do not overtighten them.
What Worksport's instructions for this truck call for:
-
Tools listed: Utility knife, No. 2 Phillips screwdriver, 10mm and 13mm socket or wrench, T50 Torx bit, T30 Torx bit
-
Mounting: no C-clamps; front, center and rear rail brackets bolt to the factory tie-down and center-bed bolt points
-
Drilling: the instructions include no drilling step.
-
Torque: the instructions print no torque values; fasteners are tightened securely without overtightening.
-
Note: The four factory tie-downs (T50 Torx) and the center bed bolt (T30 Torx) come out during the install, and the front tie-downs go back in upside down.
-
Note: Foam filler closes the gap at the bed caps on each side.
Worksport's installation instructions for this part number are linked under Resources. Read them fully before starting.
Resources
Warranty, Shipping & Returns
Warranty. Worksport covers NEXUS with a 3-year limited warranty from the purchase date against defects in material and workmanship on the aluminum framing, plastics and hardware, and repairs or replaces a covered part at its discretion. Coverage applies to the original retail buyer, does not transfer, and is void if the cover is moved to a different truck. It excludes improper installation, misuse, wind or weather damage, normal wear and a cover that comes off while driving, so check the clamps before each trip. Claims start with Worksport's warranty claim form, and shipping to Worksport is the owner's cost unless Worksport approves otherwise. Shipping. Tonneau covers ship by freight or parcel carrier depending on size, and tracking is provided once the order leaves the warehouse. Inspect on delivery. Inspect the carton and the cover when the delivery arrives, note any shipping damage with the carrier, and contact us right away so we can make it right.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Worksport
Worksport designs and manufactures soft and hard tonneau covers for the truck aftermarket, with covers for Ford, Ram, Chevrolet, GMC, Jeep, Toyota and other popular pickups.
The company calls its approach the Worksport Way: product development guided by what everyday truck owners need, and quality, American-made covers at competitive prices.
Worksport holds more than 100 patents and trademarks and trades on NASDAQ under the symbol WKSP.