The OnX6+ 50" Roof Mount Light Kit mounts Baja Designs LED lighting on the roof of this vehicle, the highest point available, for long reach over the hood and across open terrain. Mounting hardware is made for this vehicle's roof, so the lights sit level and secure. Height lets the light carry over rises and into dips that bumper-level lights cannot reach. This kit is Baja Designs part 447666 for the 2018-2026 Jeep Wrangler and Gladiator. Choose wiring type from the options above; each option is its own Baja Designs part number, listed under Specifications.
Anything a kit needs beyond the box, such as a roof rack, drilling or longer bolts, is listed in that kit's fit notes.
Features
Highest mount on the vehicle
Light from the roof reaches over the hood and across open ground, helping you read terrain far ahead and to the sides.
Roof brackets made for this vehicle
The mounts are shaped for this vehicle's roofline or rack, so the lights sit level and follow the body lines.
Baja Designs LED lighting included
Each kit comes with Baja Designs LED lighting. The series, size and beam pattern for this product are shown in the options and spec table.
Lens patterns sorted by zone
Baja Designs organizes its lens patterns by lighting zone, from wide work light to long-range spot, so a roof setup can be matched to how you use it.
Sealed against weather and dust
Baja Designs LED lights use sealed housings and hard lenses meant to keep running through rain, snow, dust and wind.
Lifetime limited warranty on lights
The lights carry the Baja Designs limited lifetime warranty for recreational use, and brackets and harnesses carry their maker's pass-through warranty.
Fitment & Compatibility
Jeep
| Years |
Model |
Notes |
| 2018-2026 |
Wrangler |
JL; exc. Rubicon 392 |
| 2020-2026 |
Gladiator |
JT; Mojave needs 80mm bolts |
Fit guidance: Fits: 2018-2026 Jeep Wrangler/Gladiator, with the qualifiers shown. Check your vehicle against these notes before ordering.
Baja Designs fit notes for this product
| Not for Rubicon 392 |
| Mojave requires 80mm bolts for the roof bar |
| No cutting, trimming or drilling |
Specifications
-
Brand: Baja Designs
-
Warranty: Limited lifetime on Baja Designs lights for recreational use (capped at 49,930 hours); brackets, harnesses and switches Baja Designs resells carry their maker's warranty
-
Mount location: Roof
-
Fitment: Vehicle specific (see Fitment & Compatibility)
-
Road use: Baja Designs notes that some of its lights may only be used off-road. Check the lighting laws where you drive before using this light on public roads.
-
Light type: Roof Light Kit
-
Beam pattern: Driving/Combo
-
Lens Color: Clear
-
Light size: 50 in
-
Color temperature: 5000K
-
Brightness: 39,430 lumens
-
Water resistance: IP69K
-
Wiring Harness Included: Yes
-
Power draw: 355 W
-
Current draw: 28.2 A
-
Part numbers: 447666, 44-7666UP
Options and part numbers
| Wiring Type |
Baja Designs part number |
| Toggle |
447666 |
| Upfitter |
44-7666UP |
California Proposition 65
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Installation
The kit mounts on this vehicle's roof or roof rack on brackets made for it, and the harness routes down into the cab to the switch the kit uses. Aim the lights on level ground. Any roof-mounted light adds some wind noise, depending on the vehicle and accessories. The fit notes below list any drilling, rack requirement or trim exclusion.
Baja Designs's installation instructions for this product are linked under Resources. Read them fully before starting.
Resources
Warranty, Shipping & Returns
Warranty. Baja Designs warranties cover defects in design and manufacturing only, and the term depends on the product type. LED light bars and auxiliary lights for recreational use carry a limited lifetime warranty capped at 49,930 hours of operation. Brackets, wiring harnesses and switches that Baja Designs resells from other makers carry that maker's own warranty, which Baja Designs passes through. Installation errors, wear and tear, misuse, accidents, collisions, modifications and installation labor are not covered, and claims need proof of purchase or product registration. Shipping. The carrier and ship method are set by the size and weight of the carton when the order is placed. Inspect on delivery. Open the carton when it arrives and check every light, bracket, harness and hardware bag against the kit contents before you start the install. Report shipping damage or a missing part right away, before anything is mounted.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Baja Designs
Baja Designs began in San Diego, California in 1992, started by riders with a habit of racing the Baja 1000. Its first product turned pure dirt motorcycles into minimally street-ready dual-sport bikes, and its work tuning race lights for night stages earned its engineers the name The Scientists of Lighting.
From motorcycle HID race lights the company moved into vehicle and buggy racing, and in 2005 it ran its first forward-projecting LED light bar in the Baja 1000. That race program still feeds the design of every LED pod and bar the company builds.
Today Baja Designs lights vehicles, Jeeps, SUVs, vans, UTVs and motorcycles, using its Lighting Zones method: pick the right lens pattern for each job and put it in the right place on the vehicle.
