BAK Revolver X4s hard roll-up tonneau cover partly rolled toward the cab, black slat canister above the open bed
Revolver X4s cover fully closed and flush over the bed of a red pickup, rear three-quarter view
Revolver X4s cover closed over the short bed of a gray pickup, rear three-quarter view
Revolver X4s rolled all the way to the cab on a gray pickup for full bed access
White pickup with the Revolver X4s cover closed, parked in a snowy field
Two men loading equipment cases into a white pickup bed with the Revolver X4s rolled to the cab
Ghosted pickup showing the Revolver X4s cover partly rolled on the bed rails
Close-up of the closed Revolver X4s matte top and side rail clip along the bed edge
Rolled Revolver X4s in the bed with the headline "The best-selling, most secure, do-it-all hard roll-up"
Close-up of the interlocking aluminum slats with the headline "The most secure hard roll-up"
Hand pressing a knife against the cover surface with the headline "Patented slash-resistance, more cargo space"
Closed cover at the tailgate corner with the headline "The lowest profile hard roll-up"
Cover rolled to the cab with the headline "Full access + full visibility = total flexibility"
Rolled cover canister close-up with the headline "Ultimate 360° protective finish"
Water beading on the closed cover with a BAK badge and the headline "Tri-Shield engineering = no seams, no leaks"

BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2004-2013 Chevrolet Silverado / GMC Sierra 1500 (5'8" Bed)

$1,399.99 $1,801.99 Save $402.00
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear
Flash Sale Ends in--:--:--

Free gifts included with your order

Details
Details
Details
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
  • Guaranteed FitmentTeam-confirmed fit or money back
  • No Sales TaxZero sales tax on every order
  • 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

+1 (470) 823-2453 Email Us
Slash-Resistant Aluminum Slats Slash-Resistant Aluminum Slats
Full Bed Access, Clear View Full Bed Access, Clear View
TriShield Vinyl, No Seams TriShield Vinyl, No Seams

Features

  • Locks Down From Both Sides: Patented rotational locking rails and automatic slam latches hold the closed cover down to resist prying, slicing and forced entry. BAK calls it the most secure roll-up in its class and rates it Level-3, its highest security level.
  • Slash-Resistant Aluminum Slats: Patented interlocking aluminum slats sit under the vinyl, so the top can't simply be cut open. BAK rates the closed cover at 400 lb spread evenly, and with no canister you keep the whole bed.
  • Full Bed Access, Clear View: Roll it to the cab with PrecisionRoll, buckle the two straps and drive with 100% of the bed open, without blocking the rear window or the factory cameras.
  • TriShield Vinyl, No Seams: One-piece aluminum-reinforced TriShield 70-grade vinyl with flush side seals and an integrated bulkhead seal. BAK calls it the most leakproof of all folding, roll-up and retractable covers; BAK's own sheet also notes the cover is not airtight.
  • Sits Nearly Flush: BAK calls it the lowest-profile hard roll-up: it sits nearly flush with the bed rails for a built-in look.
  • Matte Black, Inside and Out: BAK's 360-degree protective finish puts matte black on the aluminum slats, clamps and hardware, and the TriShield 70-grade matte vinyl resists dust and stains so it looks new longer.

Description & Fitment

Owners of the 2004-2013 Chevy Silverado / GMC Sierra 1500 and 2007 Chevy Silverado / GMC Sierra 1500 Classic with the 5'8" bed get a Revolver X4s matched to that exact box. Roll it to the cab, buckle the two straps and you can drive with the whole bed open without blocking the rear window or cameras. Fitting it means clamping two rails to the bed walls, nothing to drill, in under an hour by BAK's figure.

Fitment & Compatibility

Chevrolet
Years Model Bed Notes
2004-2006 Silverado 1500 5'8" —
2007 Silverado 1500 Classic 5'8" —
2007 Silverado 1500 5'8" New Body, w/o Cargo Management System
2008-2013 Silverado 1500 5'8" w/o Cargo Management System
GMC
Years Model Bed Notes
2004-2006 Sierra 1500 5'8" —
2007 Sierra 1500 Classic 5'8" —
2007 Sierra 1500 5'8" New Body, w/o Cargo Management System
2008-2013 Sierra 1500 5'8" w/o Cargo Management System

Check your bed: measure along the bed rail from the bulkhead to the inside of the closed tailgate. This part is for the 5'8" bed on the 2004-2013 Chevy Silverado / GMC Sierra 1500 and 2007 Chevy Silverado / GMC Sierra 1500 Classic; BAK lists the bed by that label and publishes no inch figure. Fit notes from BAK: new body style (2007 Silverado 1500; 2007 Sierra 1500); without the factory cargo management system (2007 Silverado 1500; 2008-2013 Silverado 1500; 2007 Sierra 1500; 2008-2013 Sierra 1500).

Not for: the 6'6" bed (Revolver X4s 80101, 1988-2014) and the 8' bed (Revolver X4s 80102, 1988-2014). 2014-2018 Chevy Silverado 1500 trucks with the same bed use Revolver X4s 80120.

About BAK Industries

BAK.

BAK makes hard tonneau covers. BAK bills itself as "America's #1 truck bed cover."

The range splits into BAKFlip hard folding covers (MX4, MX4 EZ-Lift, MX4 TS, G2, F1 and Fibermax) and Revolver hard roll-ups (X2, X4s and X4ts). The Revolver X4s is the matte-black step up from the X2, and the X4ts adds T-slot rails.

Authorized BAK dealer. Prestige Truck is an authorized BAK dealer, so what we sell is new and genuine BAK. BAK's warranty "is nontransferable and applies to the original purchaser of the BAK product only," and BAK requires warranty registration on file or proof of original purchase (a detailed, dated receipt) for warranty service. Your Prestige Truck order receipt is that proof.

Frequently Asked Questions

Will this fit my 2004-2013 Silverado or Sierra 1500?

Yes, if it has the 5'8" bed. It fits the 2004-2013 Chevy Silverado / GMC Sierra 1500 and 2007 Chevy Silverado / GMC Sierra 1500 Classic. Measure along the bed rail from the bulkhead to the closed tailgate, check the fit notes above, and if you are unsure, send us your VIN and we will confirm.

My truck is right at a model-year change. Which one do I need?

This part covers the 2004-2013 Chevy Silverado / GMC Sierra 1500 and 2007 Chevy Silverado / GMC Sierra 1500 Classic. 2014-2018 Chevy Silverado 1500 trucks with the same bed use Revolver X4s 80120. Go by your truck's model year and body style, or send us your VIN.

What is the difference between the Revolver X4s and the X2?

Same patented aluminum slats, locking rails, slam latches and 400 lb rating. The X4s adds TriShield 70-grade matte vinyl, an all-matte-black finish on the slats, clamps and hardware, and BAK covers it for 5 years instead of the X2's 3.

Will it keep rain and snow out of the bed?

It is built to: one-piece vinyl with no visible seams, flush side seals and a bulkhead seal. BAK calls it the most leakproof of all folding, roll-up and retractable covers, but its own install sheet notes the cover is not airtight, so plan on weather-resistant rather than sealed. Clear snow and ice off before you open it.

How much weight can it hold?

BAK rates the closed cover at 400 lb, evenly distributed. BAK's sheet also says not to drive with objects on top of the cover or tie cargo to it.

Can I drive with it rolled open?

Yes. Roll it fully to the cab and secure it with both straps. BAK says never to drive with the cover partly open, and keeping it secured is a warranty condition.

Installation

Install time Under 1 hour
DifficultyLevel 1simple installation
TypeClamp-on, no drilling
Tools9/16" wrench or socket, scissors or a utility knife and isopropyl alcohola torque wrench and a hair dryer or heat gun are recommended

Here's the short version. Follow BAK's install sheet (below) for your truck's exact clamp and bracket positions.

  1. Seal the bulkhead. Clean the top of the bulkhead with soap and water, then isopropyl alcohol, and let it dry. Stick the seal flush with the front edge, snug between the bed rails: the 3/4" seal on a truck without a drop-in bedliner, the 1/4" seal on one with a drop-in liner.
  2. Set the first rail. Place the passenger rail on the bed rail with its slotted bracket pushed all the way to the cab. With a drop-in liner, remove the foam pads at the front of the slotted brackets; some liners need their corners trimmed.
  3. Clamp both rails. Fit the first clamp 12" or less from the front, the second near the middle (two in the middle on 8' beds) and the rear clamp less than 12" from the tailgate. Press the rail down, keep it square and level, and tighten each to 10 ft-lb with a 9/16" socket. Over-tightening can warp the bed cap. Repeat on the driver side.
  4. Set the cover on the rails. Rest the rolled cover on the rails at the tailgate, roll it toward the cab and throw away the packaging. Fold the front panel back, drop the two mounting bolts on each side into the slotted brackets, then fit the rubber washer, large flat washer and lock knob underneath, loosely for now.
  5. Square it up. Roll the cover open and closed a few times so it runs freely. Line up the front vinyl edge with the front of the rails (not the rubber seal) and keep a gap of about 1/8" (3.2 mm) on each side. Both slam latches must meet the locking levers squarely at the tailgate.
  6. Lock it in. Roll the cover open without knocking it out of line and tighten the knobs by hand only. Close it and check the locking levers hold it down on both sides. Stick the four D-shaped bumpers to the slats so the rolled cover can't touch the cab, and mount the strap clamps as far forward as possible at 10 ft-lb.

Stuck on a step? Ask our install experts

What's included
  • Rolled cover
  • Driver and passenger side cover rails
  • Bulkhead seals, 3/4" and 1/4" thick
  • 6 clamps (8 on 8' beds)
  • 4 lock knobs, 4 large flat washers, 4 rubber washers, 4 mounting bolts
  • 2 strap clamps
  • 4 D-shaped bumpers

Specifications

BrandBAK
Part Number80100
Cover TypeHard roll-up
Top SurfaceOne-piece TriShield 70-grade matte vinyl, aluminum-reinforced
StructurePatented interlocking aluminum slats
FinishMatte black (slats, clamps and hardware)
MaterialAluminum with vinyl
Load Capacity400 lb, evenly distributed
LockingPatented rotational locking rails, automatic slam latches (BAK Level-3 security)
Bed Access100% when rolled to the cab, secured with 2 straps
SealsIntegrated bulkhead seal and flush side seals
MountingClamp-on, no drilling on most trucks
5th-Wheel HitchCompatible with most (BAK)
Warranty5-year limited
Fits2004-2013 Chevy Silverado / GMC Sierra 1500 and 2007 Chevy Silverado / GMC Sierra 1500 Classic
Bed Length5'8" box (GM's name), measured 5'9" (69.3")
UPC192631032021

More media

8 videos

Warranty, shipping & returns

  • 5-year limited warranty

    BAK covers the Revolver X4s against defects in materials or workmanship for five (5) years from the original date of purchase.
    • A defective cover or hardware component is repaired or replaced, at BAK's option; BAK may substitute a newer model with similar form and function.
    • It covers the original purchaser only and is not transferable. Warranty registration must be on file, or keep a detailed, dated receipt as proof of purchase; contact us for help with registration or a claim.
    • To keep it valid: clean with mild automotive soap and water only; keep the cover secured at all points while driving; check all clamps and retention parts for tightness after a week of driving after installation (or reinstallation) and now and then after that; clear snow, ice and anything else off before opening; never tow the truck from the rear with the cover on (remove and store it first).
    • Claims: get a Return Material Authorization (RMA) number from BAK before returning anything. BAK may ask for the part back postage prepaid, and shipping charges apply to a repair or replacement. A claim needs your order number, contact details, vehicle, part number, a description, the receipt and photos.
    • Not covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that is not a defect in material or workmanship. BAK does not accept returns of non-defective products once installed.

  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Order by 5 PM ET on a business day and it starts processing the same day.
    • This cover is an oversized item, so it ships by freight or as an oversized parcel.
    • Most orders arrive within 1-5 business days.
    • We email your tracking number as soon as it ships.

  • Inspect on delivery

    This cover ships in a long, heavy box. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.

  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.

What our customers say

4.6 · 1492 reviews

Photos from owners

+180
KRISTIN Verified
10/10/2025

Great Tonneau Cover

Let me start off by saying I am cheap :). Had resisted buy a Tonneau Cover for my truck for some time. Thought to my self way to costly for what it dose. I was wrong! I now can put items in the bed and not worried about them walking off or getting rained on. Just the peace of mind is worth the cost. The locking mechanism on the X4s is really cool. Every slat on the roll locks not just the ends at the gate so would take great effort to brake into this. I would say X4s is not completely water proof some still gets in at the edges by the cab but it is very minor and I think there is some ways for me to lesson it even more just haven't taken the time to see. I love the look of the X4s installation was extremely simple I has this on in less then an hour by myself. When rolled up it doesn't take much room from the bed and back windows unobstructed are unobstructed. I felt that was a big deal…

Michael P. Verified
03/11/2025

Best hard roll up cover

Great cover! Super flush and rolls up on top of the rails for full bed access. Easy to install! This is my second cover, first one was on my 2019 Silverado this cover was displayed on at sema 2019 and I fell in love with it! Can’t beat the 5 year warranty either!

David S. Verified
10/08/2026

Instillation was a breeze. Looks

Instillation was a breeze. Looks good and works even better. Was the 2nd one I’ve had and would purchase again.

Wesley C. Verified
10/08/2026

Good people to deal with.

Good people to deal with. This is the second baker cover I have had since 2016. The first one lasted till November 2023 when I totaled the truck.

Chris
06/07/2026

Love it

Very easy to install. Fits perfect and is flush with the top. No issues.

Steve P. Verified
09/13/2026

It was easy to order

It was easy to order and it came quickly. it was easy to install and it looks great

Mike Verified
08/15/2026

Very happy just what I

Very happy just what I wanted it’s perfect. Easy to install and works great

Perry Verified
07/13/2026

Good product, great customer service.

I love my easy to use Revolver X4s cover. It was easy to install on my 2004 Silverado. Rolls easily and secures well when closed. Note: The first cover was defective. I sent pictures to the manufacturer, and they sent a new cover out right away. Pretty painless to say the least. I would buy again for sure.

David T. Verified
08/10/2026

Functional

Tonneau cover arrived with chips and scratches to the powder coat on the bedrails. Not sure if due to the packaging or build quality. Bedrooms were loose inside the box when opened. And metal chips from machining all over the cover. Cover functions as intended, but kind of disappointed in the quality.

Daryl B. Verified
03/20/2025

Roll-up cover

Fast delivery,easy installation and and looks great!

Bernard K.
04/20/2026

Great customer service

I ordered a bakrak revolver. The item came from the manufacturer with a crack and also missing parts, no fault of TonneauCoversWorld. Customer service took care of the issue with no hassles. The damaged item was sent back, and a brand new one shipped. Thank you!

Gerald V. Verified
12/06/2024

X4S

It has been two months, and so far, I like this cover. The installation was easy, it was a little pricey but worth it.

Jason H. Verified
09/22/2024

Great product only 1 flaw

The Bak Revolver is a great product. I had my original one on for 7 years. This new version is improved except one of the plastic covers at the corner of the tailgate was broken when I opened the box. These plastic pieces are flimsy and in a location that is easily bumped. I love the rubber cover pieces on the bottom, much better than the felt on the previous version. That felt fell off in the first year. I also like the black underside vs the raw aluminum. No bright reflection.

Alex K. Verified
07/11/2024

Easy install and good quality

Easy install and good quality

Kevin L. Verified
05/04/2024

NOT HAPPY

Product came broken missing a rivet and the latch didn’t work. I received a replacement latch which did work and was supposed to be sent a new rail but it never arrived. Neither did the manual. I asked for a copy of the instructions and got less ent about ten different ones and none of them were for my truck. Now the tempo black plastic “flat caps” on the very end of the cover by the tailgate broke and I had to super glue the connections back on so it would be able to stay on the cover. Not happy at I love the look but was sent an inferior product

Anthony
03/23/2026

This cover is awesome!

Was delivered quick and no damage despite the box being large and heavy. Provides locking storage in bed and rolls up easy. Install was pretty easy too.

Jason T. Verified
03/24/2024

Great product

This is a very well made cover. Easy to install. I haul dirt bikes alot and this cover allows me to pull them all the way in without removing it. Also strong, held up great with 10 in of heavy, wet snow.

Jim M. Verified
09/18/2026

F-150

Issues with side rail release impacting track. Issues with hand knobs for securing 4 front hold down bolts. Issues with right side back seal at point of tailgate.

Dion S. Verified
01/26/2024

BAK Revolver X4s Tonneau Cover

Great Product A bit of a time challenge to make sure it lines up evenly so there are no small gaps for water to get it at the corners. But still was an easy chore for two people.

Todd M. Verified
12/12/2024

Chevy

Delivery was great, cover arrived in good condition. Installation was pretty easy, needed to use shims on the front of the box of a 2017 Silverado. The cover is good quality however not designed well for the 2017 Silverado. The cover had to be moved forward so bolts could barely reach the slotted holes to tighten the top down. This cause the rear of the cover to barely cover the tailgate. Its just not designed well for this model. But the cover is nice.

David W. Verified
03/14/2024

bak revolver x4tonneau cover

very nice and easy to put on

Anonymous
04/06/2025

Great Product

Little more expensive than some of the others, but definitely a great product. Love the fact that I don't lose much room when fully rolled up.

Tim W. Verified
08/09/2026

Better than expected result.

But more difficult to install than expected. I installed this on my 2023 RAM with the 6' bed. I really had a difficult time with the mounting clamps. They didn't seem to want to stay in place while I was tightening them. I think the manufacturer could have designed a better clamp for the rails. In the end, it turned out just fine. However, I can see why everyone complains about the plastic tabs on the end of the rails. I am quite sure these will pop off in no time. It seems like an aluminum tab would work better there. I really like the looks of the low profile it provides. It rained on my truck about a week after installing and there was very little water inside. I just wish things these days weren't so expensive!

Roy L. Verified
06/21/2026

I never knew how much I needed this

As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.

Richard Verified
06/08/2026

BAK Revolver X4S - 2023 Silverado Std Bed LTZ

Bought this cover after reading reviews and comparing it to others. I wanted rolling AND locking. It is more expensive than the Velcro-based rolling covers but worth every dollar IMO. I used a top-rated Velcro rolling cover for the last three years on another truck and this is far superior. I had ordered and was able to put it on the same day I took delivery of the 2023 Silverado LTZ I had ordered last year. The Revolver is unique in that the rolling aluminum slots forming the cover, latch into the side rails effectively making a locked bed with the tailgate up. Once the tailgate is closed it is as good as a locked trunk on a car. Took about an hour to install. The instructions were great. Basic ratchet and socket plus a wrench were all that was needed. Take your time aligning it to just hang over lip of tailgate. While the instructions recommend two people to lift the rolled-up cover…

Richard H. Verified
10/08/2026

Very satisfied!

I installed it by myself in about an hour. Looks great and does a great job of keeping rainwater out.

Kurtis
06/17/2026

Good “Durable” Cover

I love the look and functionality of the cover. The only negative is the plastic corners on the cover they seem to come off and break. I actually received mine already broken. This seems like a poor design choice really.

Rick Verified
06/07/2026

Ram cover

Works great. Easy to install. Keep everything in the bed out of site.. as post before, it does let water in at the corners. Only drips..

Justin S. Verified
05/30/2026

X4s on 2026 Nissan Pro 4XR

Great product fits perfectly, doesn't block rear view. Very little leakage even in hard rains. I'm very impressed and glad I spent the money on this instead of a fold up or soft top. My cargo is safe from theft and weather.

Michael Verified
06/17/2026

After one month roll has

After one month roll has kink in it. Appears to be off tracker and separation.

Eric S. Verified
10/08/2026

Great Cover

My wife and I installed this in about 1 hour. The installation went well with no hiccups. It seems to be of great quality and is very low profile so looks great.

Jason Verified
05/28/2026

Great Cover , Great Product !

Quick and easy install, love the low profile look, and cover works great !

TripN
08/26/2026

Tonneau

BAK has improved their tonneau. The old glued fabric that used to fall off in the hot Texas sun has been replaced with fitted rubber(?). What a great improvement!!! Good job BAK. My son and I installed it in about 30 minutes. I recommend 2 people due to the weight of the tonneau. It can be done solo, but a lot easier with 2.

Aaron Verified
05/08/2026

It's great

I had an OEM soft roll up cover previously on the gladiator but the wind would lift it up in the middle and pull it out from the truck bed. I switched over to the BAK revolver X4s and definitely don't have that problem anymore. It's not 100% water proof but what cover is. I'm super happy with it and hope you would too but at the end of the day it only matters that I like it. When and if I ever need another I'll be back here to get it.

Jason J. Verified
10/08/2026

What I was Looking For

I was looking for a flush mount design, that gave me piece of mind. I carry a lot of equipment in my truck and I didn't want to load it and unload it every day. It was easy to install, rolls up out of the way and I feel the equipment is safe from the elements and sticky fingers. I would recommend for anyone wanting clean and well design cover for their bed.

Harold Verified
05/01/2026

BAK Revolver X4s

Great bed cover, it was very easy to install. The flush fit looks outstanding and the cover is very sturdy. Would recommend this bed cover for a great fit and finished look.

Ron D. Verified
04/27/2026

2024 GMC Sierra

Nice product. Like the fit and look. Not inexpensive, but the quality shows.

Chmyles2
08/23/2026

GMC Bak Carbo Bed

This cover is solid. Fits like a glove. Super easy to follow instructions. Low profile and slim lines.

Brian G. Verified
10/08/2026

BAK Tonneau Cover

Easy to install, looks quality built, I hope it holds up!

Luke H. Verified
04/14/2026

Great Cover - Easy to Install!

Received it in the mail in short order and installed in 20 mins. Been a great addition to my pickup and it's effortless to operate. Never going back to a canopy!

ALOIS Verified
04/05/2026

Secure and well built

Quality product that keeps bed much more secure than traditional vinyl-only roll-ups.

Keith M. Verified
08/31/2026

Thought this was the answer to all of my problems, I was wrong.

I need a cover which can conceal and secure cargo out of sight, while maintaining the full 5’ 2” length of my bed for dirtbikes. This cover does neither (for the Tacoma). First, the cover can easily be lifted at the tailgate and a finger can reach in to unlock the roll… and I mean easy. Plus, the roll takes up a lot of space near the cab such that a motorcycle (or anything that exceeds the bed height) definitely cannot fit. To add to this, the caps at the tailgate section of the bed came broken on mine AND there were a lot off manufacturing artifacts on all of the aluminum. I feel this was a bit misrepresented and I’ll be sending mine back if possible. IMO this is only for people who want to VISUALLY hide their small cargo but not worth it for people who want something that stands up to any job.

David Verified
01/04/2026

BAK Revolver X4s

FedEx delivered it around 3pm and I had it installed within an hour or so. Very easy install with 2 people. Looks great, fits great. Quality appears to be very good, time will tell.

Brandon
10/02/2026

Won't buy anything else!

This is the 3rd of these I have had (one for each of the last 3 trucks I have owned). Pricey, but worth it. Keeps my stuff secure and dry almost 100%. Love the rolling action of it so I can still fit whatever I need to in the truck. Install is a bit tricky but worth it.

Benjamin Verified
10/17/2025

Great hard rolling cover that looks amazing, if you can get past the cost

I had a BakFlip hard folding cover on my previous truck for almost 7 years and for the most part it was amazing and held up really well. One on my minor complaints was that as it aged the panels got water logged and heavy which made folding it open and closed from just one side a little cumbersome. I upgraded to a new truck recently and decided to look for other options that would be lighter and easier to open and close. I love having a hard cover. It makes me feel a little better about leaving stuff locked in the bed. My family is also into camping and I will load the bed and then throw a car top carrier on top of the hard cover. My criteria for finding a new cover was that it had to be a hard cover, needed to leave the stake pockets open for the addition of a rack to haul kayaks and canoes, be decently water tight, easy to open and close, and look good on the truck. The BAK Revolver…

Clayton Verified
10/15/2025

Great cover but has a small annoyance

I love the look. The quality of the product is good. The powder coated aluminum frames makes a big difference in the look of quality. The logo sticker came off before I finished the instal. One side of my Instal is about 1/16 higher than the other side of the tailgate. During a wash and rain storm just the smallest amount of water dripped in from tailgate. I was would say due to the step of my Ford tailgate. The one grip I have is that when the cut the powder coated frames they left them shiny and you can tell.

Robert M. Verified
09/10/2025

Exactly what I was looking for.

I wanted to replace my soft tonneau cover with something more secure. I looked at several flip back but was concerned about the amount of water leakage so I decided to go with a hard rollup cover and the BAK X4s seemed like the best option. The cover was fairly easy to install by myself, although it would be easier with a second set of hands. The cover fit the truck bed perfectly and it looks muck cleaner than the old soft cover. Rolling it up is easy and you don't have to worry about it getting misaligned when you roll it back. While it is not completely watertight the amount of leakage is minimal through the carwash and with a bed mat in place the water drains under the mat. Overall I am very happy with ths X4s.

Bryan K. Verified
10/07/2026

Love it

Showed up fast

Bronzeboy
08/11/2026

BAK Revolver x4s

Great Fit. Looks awesome. Only the lightest of water infiltration at the tailgate in heavy heavy rain and hail!

Craig S. Verified
07/23/2025

Big Red Truck

Fit perfect on my red F150 Rocky Ridge. Install went smoothly. So far so good!

Skyler Y. Verified
07/22/2025

Bak revolver x4s

Great tonneau cover. Love the look of it. Only flaw is the plastic end caps have already broke and I havent owned it a month.

Robert S. Verified
10/06/2026

Tonneau cover

Easy installation and fits truck great 2024 Chevy 3500

Russ F. Verified
07/05/2025

Piece if cake

Using video for instructions was a breeze. I'm disappointed mine did not come with the T channel. It looks like an excellent way to add accessories. Having a flat area to install and to open and close would be the best in terms of keeping the top plumb rolling it back out. One other thing! If you're in an accident don't expect to get your money back. Insurance company would say in not part of specified equipment. Hence accessories not not cover on insurance policies, unless as add on's!

Gus I. Verified
05/31/2026

Ehh

Not the quality it should be for over a thousand dollars. Doesn’t fit correctly rough cut unfinished edges. . plastic pieces broke 2 times already. . I would not buy it again. My last truck I had the folding cover, which was much better. I decided to try the rollup, but never again.

MDew
08/06/2026

Love it

Took about a half hour to install. Straight forward instructions. Looks great. Almost 0 leaks. I get a few drops around the tailgate. Very easy to roll up. Stays put when you strap it in that position. I got an open box deal so I was super happy. Quick shipping and it looked like it had never been used!

David S. Verified
07/02/2025

New tonneau cover

Nice unit, was relatively easy to install. All and All, it took about 45 minutes. Would highly recommend.

Stephen F. Verified
10/05/2026

Nice choice

The instructions were easy to follow, the cover fits well and looks nice.

Kevin D. Verified
06/23/2025

Best Product out there IMO!

Simply a fantastic product that stands the test of time and install was simple! This is my second Revolver X4s and I recommend it to all of my friends who own trucks!

Shawn W. Verified
05/24/2025

#1 Product

Love this product. Thats why I purchased again

JerryM
07/17/2026

BAK X4S

What an awesome looking cover, super low profile. I hope the build holds up as good as the initial install two thumbs up.

Andy C. Verified
10/03/2026

Looks amazing

It was a gift for my father. He loves it. He was able to install it quickly and effectively. Looks amazing and does what it is supposed to!

Michael D. Verified
04/03/2025

Great tonneau!

Great cover! Easy to install.

Mark W. Verified
03/27/2025

Ram RHO Revolver 4s

Excellent fit and easy install. The cover keeps the bed of the truck dry, even when washing the truck with a good amount of water pressure. Rolls up easily and tight, no blocking the rear window at all.

Anthony O. Verified
07/23/2024

Bak Revolver X4s

First the packaging for the cover was greatly reinforced when delivered and all the partrs needed for installation were in the box thankfully. I planned to do theinstall mysself and noticed since i have the Sierra carbon pro bed that the clamps to hold down rails were not part of the installment. instead there were notched holes in bed where metal clamps provided would fit and I would need to drill hles through the plastic cover to lockin the rails. This took a bit longer than expected but not too hard as I used a Youtube reel to help figure out the process. Also provided was a metal insert to help guide where the holes should be drilled to accuratley add screws to lockdown the rails. Note before before tightening all screw toward the bed add the nylon strap to hold the cover in place if leaving rolled up. This was one mistake I made as the screw are angled different once tightened…

David
09/29/2026

Three years strong

I bought the X4S when I bought my truck. They did the install, so I don’t know how hard that was. However, after three years the cover still works perfectly and looks great. I would definitely buy another. The only issue is that it has to be all the way open or all the way closed. There is no way to stop it somewhere in the middle. That hasn’t been a real problem though.

Thomas H. Verified
07/21/2026

Great concept, poor design, high priced for poor quality

I’m disappointed in this product. The quality of the bedcover doesn’t justify the price. The concept of a recessed rollup seamless bedcover is great, but this product falls short. The rubber gaskets at wavy and the bedcover does not fit properly in the tracks. Even though I added shims between the side rail brackets and the bed rail just to make the bedcover fit into the track, it still isn’t perfect. It was also difficult adjusting the side rail brackets to allow the tailgate to close.

Josh B. Verified
05/14/2024

Best Damn Tonneau Cover

Let’s talk about shipping first. I ordered this product on a Thursday evening and received it Monday afternoon. Quick turn around if you ask me. Now for the cover, super nice and easy to install. I installed it on a Dodge Ram 2500 and it looks great. It sits evenly with the top of the bed sides so it’s hard to tell that it’s on there. I own an industrial maintenance company so everything I get has to be heavy duty. With that being said, I would definitely recommend this cover. It not only looks great, it is top of the line and very solid. Easy to open and close by yourself. And to be honest, it could easily be installed by one person. I’ll add a few photos so you can see what it looks like in real life.

Joseph Verified
12/07/2022

Sleek and solid cover

Bought this cover after watching numerous reviews on YouTube. Its super easy to roll, very low profile, and mostly waterproof. There is some water that gets in near the tailgate during heavy rain, but not bad at all. Was able to install it by myself, instructions were not difficult at all. Did have one issue where after a week one of the caps near the tailgate went missing, but their support was very friendly and quickly rectified the situation.

Philip F. Verified
06/23/2026

Roll back cover.

Its a overall great cover instructions are horrible honestly. Just a matter of figuring out if the tailgate should bump against the end of the cover or if it should set on top. It looks great overall but fit is a little wonky in my opinion. It's possible that ford doesn't have the tightest of manufacturing specs though. If you take your time you can make it fit better using some small spacers between bed rail and cover Chanel.

Gayle I. Verified
10/03/2026

BAK Revolver X4s Tonneau Cover

My husband ordered this for his 2023 Chevy 2500 and he loves it! He is a longtime Volunteer Firefighter and wanted a cover he could secure his gear in the bed of his truck. This meets all his expectations! Thank you.

Mtmille
07/12/2026

BAKb4TS

Awesome install! Clean look and secure bed cover. One of the best upgrades to put on my 26 Raptor!!!

Carman Verified
05/13/2026

Functional and sturdy

Easy install. Took multiple attempts to align the sides properly. But it looks good and seals up nice to keep the bed secure.

Rick Verified
05/03/2026

Great Product!

Looks amazing. A bit pricey but the quality is there. Very strong materials and fairly easy to install with one person.

Wilson P. Verified
10/02/2026

CT weather

It's a great product

Ralph P. Verified
12/13/2025

1) Rear corner end caps

1) Rear corner end caps for aftermarket / consumer product should be same as OE version ( Ford ). They are prone to popping off and requiring replacement (extra parts are now included with product so it's a known problem) 2) Rough Edges of side rails need to be finished to avoid causing injuries 3) these inexpensive improvements would make a good product an exceptional product and deserve a 6 rating !

JaviU
06/14/2026

Super easy to instal

Didn’t come with instructions so had to YouTube it. But super easy to install especially with clamp. Exactly what I wanted because of the sports bar

Mace L. Verified
11/23/2025

Unfinished business

The edges of the rails right next to where the tailgate closes a razor sharp and should have been Deburred and or filed The springs that make the rails unlock are not strong enough so that you have to pull the release cable a couple timesto get them to flip up so you can start rolling the top back.

Derek J. Verified
04/25/2026

It does the job

For the money spent I thought the quality would be better. Deducted a star because the lack of packing material protecting the side rails from getting bent ends which both did. Fixed with pliers. Deducted another star because of a weird hump only on driver side close to cab when closed and I’m not sure what’s causing it but it’s been like that since new.

Nick M. Verified
10/01/2026

Best cover out there.

Best cover out there.

Stephen Verified
11/16/2025

Added security without loss of bed space

I have a Ram Ltd with RamBox so I did not want to lose any bed space (as you do with most roll-up covers), and I also wanted a greater degree of security than is offered with most "sit on top" covers. This has a fairly robust latching system that engages at the corners of the tailgate and runs the length of the bed down each side. You have to open the tailgate to disengage it. While a determined thief with tools could probably get into it, I'm confident I'm protected from the typical smash and grab. Looks great, and after fiddling with different weather stripping, and a little caulk here and there, even in heavy rain, I don't get more than a few drops that trickle down the sides of the bed walls and at the corners of the tailgate. I don't worry about anything in there getting wet.

Derek S. Verified
10/11/2025

Very nice hard cover

Love the sleek look, how quick and simple it is to roll/unroll the cover. Only reason its not 5*'s is the water that leaks in around the tailgate. I'm going to have to look for a seal kit to improve that. For the price, that should be included.

Zack Verified
04/16/2026

Save your Money!!!

Yes, they tried to make some improvements, but a big fail on the end caps. Mine broke off when unrolling the cover for installation. Also the cover had a tear under the end caps as well. Ease of installation was good.

Nathan
08/06/2026

Overall very nice setup

Easy install and nice setup. Minimal water gets past into the bed. One bad thing is little end caps may not be very sturdy as one has already popped off and it’s only been 2 weeks

Bill
08/28/2026

BAK X4S

Right to the point I rate this product 5 stars only here’s why. 1. Product came in damaged, bent rails, 2 Parts made from plastic come off and I had to use epoxy to repair those items. 3 Even after following the install instructions for alignment still will not fit to the tailgate 1/4 gap with gate is closed. 4. Driver side near cab will not catch the lock rail. If I had to buy this or recommend I wouldn’t and look for a different product. For the price we pay for a quality product this isn’t worth the expense. Sorry I really wanted to like this product, but has been a big disappointment.

Larry Verified
12/08/2025

Almost a fit for 21 F-150 5.5 bed

Opened the box and this seemed to be pretty nice quality overall. Once I had partially installed I needed to unroll it to access the back end as it was rolled up with the back end inside the roll. Both back corner caps were busted due to the tight roll which a call to customer service had replacements in a couple of days. Most disappointing was the quality of the side rail cutouts. Each one is a T until it gets to the back where it is cut to just the top part of the T so your tailgate can close. The piece seemed cut with a pair of shears and a very sharp line existed on both rails which cut into the plastic on both sides of the tailgate when I attempted to close it the first time. They are kind of hidden under a rubber seal that also gets pushed back by the closing tailgate. Very poor engineering and quality. I had to use a file to smooth these burred cut lines down so they wouldn't…

Chet T. Verified
08/10/2025

Not great

Cover not even 4yrs old and tearing already

Luke E. Verified
08/25/2025

Revolver X4s for the Honda Ridgeline

Overall, I like the cover a lot! looks good and was easy to install. However, my cover does not open using only one side of the pull - I have to use both hands and release the wire on both sides and the same time. It is advertised as being able to open the release from only one side, I believe. Also, there were two cosmetic issues with the cover out of the box - a light scrape on the powder-coated rail and a small slit/tear on the cover where it rests on the tailgate. If these issues were not a problem, I would give it 4-5 stars easily.

Santiago R. Verified
11/13/2024

Quality not the best

The product looks good, but upon performing the install, the small plastic piece on the corner of the bed broke when applying light pressure. I submitted a warranty claim almost a week ago and they have not responded. Bad customer service. It's like they don't care

Paul H. Verified
06/14/2025

2014 Toyota Tacoma

Having an older truck, we don't get too many options for quality truck bed covers so I was excited when I found this. However, I have 2 major flaws on this that I was expecting when paying such a premium price for this cover. The biggest problem with the design on this truck bed cover for 2014 toyota tacoma, is that there is a clear gap in between the tailgate and the actual cover. So much of a gap that you can reach your hand in and pull the lever to open the truck bed cover when the tailgate is closed. So now I have to try and find something to secure the gap unfortunately. The second problem I have is that the right side on the rolling cover doesn't click in when you push it down like the left side. I have to actually pull the lever on the right side for it to lock into place. If I would have known this from the start I would not have purchased this. However, the quality of the…

Albert H. Verified
09/06/2024

Missing parts and it is going to take 2 weeks for the order to process

My new cover arrived missing a part to lock it and I was told that it is going to take 2 weeks for the replacement parts to be approved and ordered. This means that it will take over 2 1/2 weeks to receive the missing part.

Ryan O. Verified
07/28/2024

Missing screws and broken

The bedrail came missing a screw and the corner on the top is broken. Frustrating for the cost.

Desmond279
08/30/2026

Low quality

Had this cover on my truck for a little under a year. The material started peeling off exposing the bare metal and glue that was holding it on, then the metal parts started coming apart likely due to the material peeling. Not happy at all with this product as it didn’t even last a full calendar year, considering how much it cost i thought I was going to get a quality product that would last longer.

Anthony
05/22/2026

Awful poor packaging slow shipping

Received bent garbage due to there packing!! Took more than 30 days to get refund actually still haven’t got refund!! Terrible customer service response!!!!!!

Isaac
05/15/2026

Disappointed

I purchased this bed cover after a friend recommended it. It was exactly what I was looking for! When I first installed it I was really impressed but after 2 weeks of use it started breaking. (See photos)

Anonymous
03/14/2026

Waste of Time

Defective out the box 2 times. Refunded and done.

Lamont L.
03/03/2026

Wouldn’t do this again.

My cover took weeks to ship. I expected sooner because the site said they had plenty in stock and I should expect fast shipping. When my cover finally arrived the packaging was damaged. My cover was also damaged. I called and logged a ticket the day I received the package. It took over a week for them to respond and ship replacement part. We’ll see how it goes from here.

A
01/05/2026

Entire purchasing experience

Horrible! Waiting on my third replacement cover today, still haven’t received my discounted refund, customer service just hung up on me. I don’t recommend this this company. I’m on damage control at this point, even after speaking with Two supervisors Michael and Amanda. Poooor!

Anonymous
01/04/2026

Customer service

I called to order a part for my new cover the back left part popped off as i rolled it down the rep said they couldn't help me and someone would reach out to me i have yet to hear from anyone i sill need the part would love someone to contact me so i can get this fixed its has been on my truck about 25 days the truck is about 40 days old i just got it

Meghan H.
12/28/2025

Honda Ridgeline cover won't fit

Have been sent 2 covers now and both completely off on size. About a month of trying to get a proper cover but responses are slow and not helpful at this point. It would be great if there was an installer that I could be sent to free of charge since this has become a nightmare. Or some sort of credit since I've personally spent about 10+ hours troubleshooting this garbage. I'm going to start lighting up your social media if this isn't rectified shortly.

Thomas H. Verified
04/09/2024

Revolver x4s bed cover

Well I live in South Florida and it rains a lot when it rains a lot the water goes through the cover and all your stuff in your truck bed gets wet it looks nice but it lets the water through so there you have it.

Jessevarela214
08/27/2026

Doesn't keep out the rain

Instructions are very clear and easy to follow. First tonneau cover I have used that won't keep the rain out. Solid cover, well made, seals are just not holding up to Michigan weather (rain in September). Alot of money to spend on a tonneau that doesn't repel water. id show pics but do not know how on this review.

Brian C.
06/23/2026

Nice cover okay fit

Not super happy with the fit of the passenger side rail. Have put it on multiple times with the same result.

Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question