BAKFlip FiberMax hard folding tonneau cover fully closed on a blue pickup, rear three-quarter view
BAKFlip FiberMax with the rear panels folded forward to open the back of the bed
BAKFlip FiberMax folded and standing upright behind the cab for full bed access
Straight-on rear view of the closed BAKFlip FiberMax over the tailgate
Rear view of the BAKFlip FiberMax with the rear section folded open
Rear view of the BAKFlip FiberMax folded up against the cab, bed fully open
Closed BAKFlip FiberMax on a brown pickup parked beside a lake
Brown pickup with the BAKFlip FiberMax folded forward and a green kayak loaded in the bed
Pickup with the BAKFlip FiberMax and a cooler on the lowered tailgate while a man fishes from a dock
BAKFlip FiberMax folded up behind the cab on its prop rod, seen from the bed
BAKFlip FiberMax closed, shown on a faded pickup so the cover stands out
BAKFlip FiberMax rail and seal along the bed side
BAKFlip FiberMax prop rod and drain tube inside the bed
BAKFlip FiberMax no-drill clamp holding the rail to the bed
Matte FiberMax panel with the BAK badge

BAKFlip FiberMax Hard Folding Tonneau Cover for 2024-2025 Ford Ranger / Ranger Raptor (5'1" Bed)

$1,299.99 $1,603.99 Save $304.00
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear
Flash Sale Ends in--:--:--

Free gifts included with your order

Details
Details
Details
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
  • Guaranteed FitmentTeam-confirmed fit or money back
  • No Sales TaxZero sales tax on every order
  • 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

+1 (470) 823-2453 Email Us
Folds up to the cab
Built-in water drainage Built-in water drainage
No-drill clamp install No-drill clamp install
EPDM weather seals EPDM weather seals
Textured FRP top panels Textured FRP top panels
Panels latch automatically Panels latch automatically

Features

  • Folds up to the cab: Unlatch it and fold the cover forward to the two-thirds-open position, or fold it again against the rear window for full bed access. Nylon buckle straps hold it folded, and the built-in prop rods hold it up against the cab so you can drive that way.
  • Built-in water drainage: An internal water channel catches water that gets past the seals and guides it down the rails and out through drain hoses at the front of the bed.
  • No-drill clamp install: It clamps on with the included clamps and hardware, with no drilling or modifying the bed on most trucks, and BAK puts the install at less than an hour.
  • EPDM weather seals: EPDM rubber hinges and outer rail seals keep water out. The tailgate seal is a conventional one, so BAK says to close the tailgate before the cover for the best water resistance.
  • Textured FRP top panels: Textured gloss-black fiberglass-reinforced polymer (FRP) top panels sit on an aluminum substructure and resist UV fading. BAK says FRP stands up to impacts, abrasion and temperature extremes better than soft covers or aluminum tops; BAK rates the cover at 300 lb, evenly distributed.
  • Panels latch automatically: Each panel latches to the mounting rails on its own as the cover closes. To open it, unlock and lower the tailgate, reach under the cover and pull the release cable.

Description & Fitment

Made for one bed, the 5'1" box on the 2024-2025 Ford Ranger, plus the 2024-2025 Ford Ranger Raptor, this BAKFlip FiberMax folds back in panels. It bolts on through the factory plastic-clip holes, so no new holes are needed. Expect BAK's patented rail with a load-bearing flange and EPDM rubber hinges and outer rail seals. Opening it starts with the tailgate down: pull the release cable and lift the panel toward the cab. The warranty is BAK's own: 3 years, limited.

Fitment & Compatibility

Ford
Years Model Bed Notes
2024-2025 Ranger 5'1" —
2024-2025 Ranger Raptor 5'1" —

Check your bed: measure along the top of the bed rail from the bulkhead to the inside of the closed tailgate. This cover is for the 5'1" bed.

Not for: the 2019-2023 Ford Ranger (1126332). Each of those has its own BAKFlip FiberMax part number.

About BAK Industries

BAK Industries makes hard tonneau covers for pickups, among them the BAKFlip hard folding covers and the Revolver roll-up line. BAK's install sheets and customer service come from BAK Industries in Springfield, Missouri.

The FiberMax is the BAKFlip with textured FRP top panels on an aluminum frame, rated at 300 lb with a 3-year warranty. The F1 shares the FRP look with a foam core and a 400 lb rating, and the G2 uses solid-core aluminum-skinned panels.

Authorized BAK dealer. Prestige Truck is an authorized BAK Industries dealer. BAK's warranty is for the initial owner who buys the cover, and BAK states: "Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty to be effective." Keep your order confirmation; contact us for registration help.

Frequently Asked Questions

Will this fit my 2024-2025 Ranger?

Yes, if it has the 5'1" bed. Measure along the bed rail from the bulkhead to the closed tailgate, or send us your VIN and we will confirm.

Do I have to drill anything?

No. The clamps bolt through the holes left when you remove three of the four factory plastic clips on each side.

How is the FiberMax different from the BAKFlip F1?

Both have textured gloss-black fiberglass-reinforced polymer (FRP) tops. The F1's panels have a high-density foam core, are rated at 400 lb and carry a 5-year warranty. The FiberMax uses FRP top panels on an aluminum substructure, is rated at 300 lb and carries a 3-year warranty.

Will it keep rain and snow out of the bed?

It is built to. EPDM rubber hinges and outer rail seals keep most water out, and an internal channel sends what gets past them out through drain hoses. The tailgate seal is a conventional one, so close the tailgate before the cover. BAK's install sheet notes the cover is not airtight, and clearing snow and ice before opening is a warranty condition.

Can I carry cargo on top of the cover?

BAK rates the closed FiberMax at 300 lb, evenly distributed. Its install sheet also says not to tie cargo to the cover or drive with objects on top of it, so treat the rating as a measure of strength, not as a roof rack.

Can I drive with it open?

Yes. Folded once, the nylon buckle straps hold it; folded against the rear window, engage the prop rods. BAK's warranty requires the cover to be secured at all points whenever the truck is moving.

Installation

Install time Less than 1 hour (BAK)
DifficultyLevel 1simple installation (BAK)
TypeBolted through the factory clip holesno new holes
Tools
  • T-30 Torx bit, 1/2" wrench and a Phillips screwdriver
  • plus isopropyl alcohol and scissors

Here's the short version. Follow BAK's install sheet (below) for your truck's exact clamp positions and settings.

  1. Seal the bulkhead. Clean the top of the bulkhead with soap and water, then isopropyl alcohol, let it dry and stick the bulkhead seal flush with the front edge of the bulkhead, snug between the bed rails.
  2. Remove the factory clips. On each side, pry out three of the four factory plastic clips (center first, then the whole clip). BAK notes they're only needed again if you take the cover off for good.
  3. Bolt the side rails. Slide three clamps into each side rail, push the rail (drain end) against the bulkhead and line each clamp up with a clip hole. Pass a Torx screw through a washer and the clamp into a nut behind the sheet metal, then, front to rear, tighten each to 8 ft-lb (11 Nm) with a T-30 Torx bit and a 1/2" wrench on the nut while pressing the rail down and square. Fit the drain tubes.
  4. Fit the cover. Slide the two cover retainer clamps into the track under the cover near the cab, and screw the two strap buckles to the front panel by hand with a Phillips screwdriver (BAK says no screw gun). Set the folded cover on the rails at the cab end, centered between them, and turn the retainer clamps clockwise until the lock washer is secure.
  5. Unfold and square it up. With the cover still folded, clean its top edge where it meets the cab (soap and water, then isopropyl alcohol) and stick the cab bumpers along it. Unfold the cover to the tailgate and check that each panel is centered side to side and front to back; the tail panel should overlap the tailgate by about 1/2". Shift it on the loosened retainer clamps if needed, then re-tighten them. With a power tailgate, make sure it still opens and closes with the cover shut.
  6. Check the latches. Release each latch to make sure it catches the side rails; the sheet shows how to adjust a slam latch that hits or misses. BAK's warranty asks you to re-check every clamp after the first week of driving and now and then after that.

Stuck on a step? Ask our install experts

What's included
  • Hard fold cover
  • Driver and passenger side rails
  • Bulkhead seal
  • 2 cover retainer clamps
  • 6 clamps with 6 Torx head screws, washers and nuts
  • 2 buckle ends with gaskets, screws and nutserts
  • 2 drain tubes
  • 3 D-shaped cab bumpers

Specifications

BrandBAK Industries
Part Number1126342
Product LineBAKFlip FiberMax
Cover TypeHard folding
Top PanelsTextured fiberglass-reinforced polymer (FRP), UV-resistant
StructureAluminum substructure
FinishGloss black, textured
Load Capacity300 lb, evenly distributed
RailsPatented rail design with load-bearing flange
LatchingAutomatic latches, cable release
SealsEPDM rubber hinges and outer rail seals
Tailgate SealConventional (close the tailgate first)
DrainageInternal water channel and drain hoses
Bed Access2/3 folded once, full folded to the cab
MountingClamp-on, no drilling on most trucks
Install TimeLess than 1 hour (BAK)
Warranty3-year limited
Fits2024-2025 Ranger; 2024-2025 Ranger Raptor, 5'1" bed
Bed Length5'1"
UPC192631018278

More media

6 videos

Warranty, shipping & returns

  • 3-year limited warranty

    BAK covers the BAKFlip FiberMax against defects in materials and workmanship for 3 years from the original purchase date.
    • BAK's limited warranty runs three (3) years for its G2 and FiberMax covers, from the original purchase date.
    • A defective cover or hardware part is repaired or replaced at BAK's option. BAK may instead substitute a newer model of similar form and function, offer a warranty discount on a complete replacement system, or provide another remedy.
    • It covers the original buyer only and is not transferable. BAK states: "Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty to be effective." Contact us for registration help.
    • To keep it valid: clean only with mild automotive soap and water; keep the cover secured at all points while the truck is moving; check all clamps and retention parts for tightness after the first week of driving (and after any re-install) and now and then after that; clear snow, ice and anything else off before opening; and never tow the truck from the rear with the cover on (take it off and store it first). BAK's install sheet adds that insect repellents, oils, solvents and lubricants can damage the rubber hinges and seals and void the warranty.
    • Claims: get a Return Material Authorization (RMA) number from BAK customer service before sending anything back. BAK may ask for the part, postage prepaid, to make a final decision; shipping charges apply to a repair or replacement, with no other charge.
    • Not covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that isn't a defect in materials or workmanship.

  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Order by 5 PM ET on a business day and it starts processing the same day.
    • The cover travels in a long, heavy box, by freight or as an oversized parcel depending on its size.
    • Most orders arrive within 1-5 business days.
    • We email your tracking number as soon as it ships.

  • Inspect on delivery

    This cover ships in a long, heavy box. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.

  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.

What our customers say

4.7 · 320 reviews

Photos from owners

+13
David S. Verified
01/09/2025

Great Upgrade-Sleek Look & Secure

Fantastic hard cover. Easily a huge upgrade from vinyl and installation was a breeze. There is a fantastic video that walks you through step-by-step how to put it on, and it took under an hour. The ability for the cover to fold back in sections and still stay secure is a major plus. I love how the black gloss matched my paint very closely, and even my wife commented on how much better the truck looks. If you’re gonna spend tens of thousands of dollars on your vehicle, then why not invest a little bit to keep the items in the back secure, while also looking great.

Peter F. Verified
10/30/2024

BakFlip FiberMax

Great item....no complains

Tom Verified
05/11/2021

Great cover, one issue.

I love the cover, but when you drive with it partially open strapped in place there is a sharp edge that rubs on the outer weather stripping. I filed the sharp edge and added some additional weather stripping.

Lenny T. Verified
09/28/2026

Great product. Nice finish

Great product. Nice finish

Anonymous
02/05/2026

Works great looks good on

Works great looks good on my truck

chris Verified
08/14/2026

FiberMax

Excellent

Brian Verified
06/30/2026

Better than expected

The install was pretty straightforward and took under an hour. Super happy with security that it provides, protecting the bed contents from theft. I took it through an automatic car wash day 1, and was impressed. There was some water intrusion in the corners, but it was very minimal. We took a road trip from Texas to Florida and encountered a nasty thunderstorm. I'd say the bed was about 90% dry. Super satisfied with the performance.

Dalton Verified
01/14/2026

nice product

very nice looking and easy to install

STEVEN Verified
08/26/2026

Scratches easy

Overall it’s a good cover. I used it in the folded position and it scratched pretty easily.

Chris B. Verified
05/15/2025

Backflip fibermax

Product looks great. Install a little more difficult but got through it.

Shawn C.
03/21/2025

Excellent Bed Cover!!

I ordered from the sales representative online. Excellent customer service and answered all of my questions quickly. I ordered the product and it arrived on time as specified. Installation, Fit and Finish were perfect!! Great work!

Clifton Verified
05/14/2025

Great Cover

Very nice and solid cover

Rob Verified
05/13/2025

Thumbs up !!

Thumbs up !!

Whitney Verified
05/13/2025

BAKFlip is the best

I reviewed and actually talked to people in parking lots of restaurants and shopping and asked them about their tonneau tops. The only one who was 100% satisfied with their product was the BAKFlip owner. It is a solid cover that clicks into place and locks securely. It is not completely waterproof but with the soft mattress I purchased with it any water stays below in the ridges of the bed cover. I highly recommend this product...you get what you pay for.

William B. Verified
03/30/2025

Solid and pretty waterproof

I’ve had the Bakflip tonneau cover on my 2019 Ram 5.6 bed for about 6 months now, 3 months in FL and 3 in MI. So far no complaints. My gas mileage improved by about 3 mpg (5.7 hemi). Very happy with this product, but it’s not cheap.

Alan S.
10/25/2024

Thank you for the excellent cover

Great cover only took about a half hour to install doesn't leak, and i particularly like how flush it sits on the rails

William K. Verified
02/13/2025

Looks great

It’s about 80% water proof. Some leaks on the sides from standing water that “pools” up, but not bad at all.

Dave
03/18/2026

Not water tight at all

installed properly... but does not create a seal or even close to a seal. I'll need to add third party gasket material.

Rob F. Verified
01/26/2025

Love the Bakflip cover

Love the Bakflip cover

Ronald R. Verified
01/14/2025

Very pleased!

Very pleased!

Eric T. Verified
12/28/2024

Great add on.

Easy to install and use. Love the low profile look.

Tyson L.
07/25/2024

Tonneau Cover

It is absolutely perfect for our truck! Works great and looks amazing! Would totally buy again!

Damon S. Verified
12/23/2024

It does the job

It does the job

Brian V. Verified
12/20/2024

New mounting rails, eh, fibermax

New mounting rails, eh, fibermax is great, had the older aluminum/ mix top it warped, new Fibermax is far better

Dan R. Verified
12/20/2024

Just perfect!

Just perfect!

Rob Verified
12/10/2024

BakFlip FiberMax Tonneau

It was delivered and within an hour it was done. It helps if your wife helps set the tonneau in the tracks. It lined up and works just like they said it would, AWESOME

Gw
04/26/2024

Very happy customer

Very good quality @ easy to install. Looks great on our truck@ is easy to use.

Howard C. Verified
12/07/2024

This is my third backflip.

This is my third backflip. Great product.

Garth D. Verified
12/07/2024

This is my fourth Bakflip,

This is my fourth Bakflip, I really like the way they look

Kevin D. Verified
01/13/2026

Does not keep water out

An amazing cover but allows too much water in.

Anton Verified
12/01/2024

BAKFlip Fibermax Tonneau Cover

Put it on my 2018 honda ridgeline. Was very easy to install. Does leak a little when it rains, but nothing to complain about. Very good cover. On the ridgeline, you about 3 inches in the with of the bed because you need to install additional rails to install the cover. The directions for this were a little confusing. Other than that, no complaints.

George Verified
11/28/2024

Nice cover

Installation was simple Seems rather watertight. Haven’t noticed any water in bed.

Jose M.
03/14/2025

Good Cover!!

This is a good almost great cover, low profile which i love. Easy to install. If anything i would critique was the instructions the could have been more detailed, but the youtube video was a blessing. Thanks

Tim Verified
11/25/2024

Best and easiest cover I have ever had.

Installation was very easy. Looks great and folds open all the way to the glass, real easy. Solid. Highly recommended.

Earl P. Verified
11/07/2024

My tonneau

Works great looks great and easy to install.

Normand L. Verified
10/25/2024

Truck F150. 2014

Good service and price are great

Norbert G. Verified
10/23/2024

BakFlip

Good looking cover and great price. Free Shipping ,you can't beat that.

PKH
12/05/2025

Awesome Cover

This is my second cover I've installed and they are great. Easy to install, takes less then an hour. Looks great when completed and is secured. Maintenance is very easy and I can see this will last a long time. You can't knock this cover, well built.

Jeffrey M. Verified
10/23/2024

Looks great. Time will tell if it holds up.

The install was far easier than the instructions indicated. It's obvious that the instructions weren't updated for the 2024 Ranger because it has parts that aren't listed on the instructions and it goes together easier once you figure it out. It fits well, though I'm not sure its entirely waterproof. Time will tell. The look is outstanding and all I had hoped for. We'll see if the rubber seals hold up to the weather any better than the leather of most covers. That will be the real test. It's not year one I'm concerned with, it's years three through five.

Tim Y. Verified
10/15/2024

Nice cover

Seems to be well made attractive cover that was very easy to install.

Steve K. Verified
10/15/2024

Outstanding cover

Cover is well made and awesome appearance to any truck. Install was a bit tricky but after watching videos, was easier to understand.

Anonymous
01/19/2026

It’s cost too much to be just OK

When you roll it up, the pieces that hold the panels together come out. This results in the cover not sitting flush until you puts them back in place. A simple pin through teach one would prevent this from happening. Buy a roll of flex tape if you want it to be waterproof.

Todd B. Verified
10/09/2024

Good product as advertised

Good product as advertised

Jimmy
07/30/2026

2022 F150

Second bakflip for me. Great cover.

Bruce P. Verified
10/05/2024

BakFlip Fiber Max

High quality product. Great functionality and easy install.

Donald M. Verified
10/03/2024

Awesome look

easy to install,gives my truck a whole new look

Patricia S. Verified
09/22/2024

Tonneau cover

Fast shipping and well packed. This is our 5th Bak tonneau cover.We don’t worry about anyone breaking into it. Well built and versatile for hauling objects.

G T. Verified
09/09/2024

Bakflip

No leaking, had it installed in a half hour, looks awesome, and gave me 1 1/2 miles per gallon.

Ntemp
11/21/2025

Great Product

Great build and quality. I don’t regret buying this one bit!

Connie P. Verified
08/26/2024

Trifold cover

Looks great. Easy to install.

Suzette M. Verified
08/24/2024

Very well constructed

very happy with it

Kendall B. Verified
08/16/2024

2017 Silverado 3500

Overall a nice product and easy to install. Have drove through a heavy rain storm for few hours and had minimal leaking around a few edges. If your tailgate locks it's nice to be able to lock all your items in the bed. I installed it alone and wasnt that difficult, maybe an hour.

Keith O. Verified
07/30/2024

Real easy installation, after heavy

Real easy installation, after heavy torrential rain only one small leak by tailgate. Would highly recommend.

Ger Y. Verified
02/24/2025

Great product but missing some stuff.

Great cover but was missing a few things for the installation and which I had to go to the hardware store or else I would of rated it a 5*

cobraball93
11/01/2025

Tri-Fold Cover

Excellent product that is well built and sturdy. Looks amazing and is well put together. It was very simple process to install and fits perfectly.

John K. Verified
07/18/2024

Perfect Fit

Installed the Fibermax without a hitch on my 2016 Ram 2500. And fits perfectly.

David T. Verified
07/09/2024

Great Tonneau Cover

Really like this cover. Nice and Solid. I really like the sleek look, the versatility of it and the fact that each panel clicks in solid. I reccomend it.

Phelps T. Verified
07/03/2024

Great tonneau cover for 2017 Toyota Tacoma

This cover has exceeded my expectations. It was easy to install, although I did snap one of the bolts in the process, so the bolts could be a bit stronger. The cover fits the 6' bed of my 2017 Toyota Tacoma perfectly, and opens and closes with ease. It withstands the rain, snow and ice here in Maine. It has a great seal, and is essentially waterproof - the only time a bit of moisture got in was during a six hour drive on highways through a pouring rain. Otherwise, it is watertight. Best of all, it looks great. Couldn't be happier.

Gary D. Verified
06/28/2024

Love it, couple of issues

The video and instructions don't really explain how to strap down when cover is completely opened. The knobs to tighten the hinge receptor when wanting to prop up cover keep coming off. I've tried a few things to address that, will see if it works Beautiful Tonneau cover and easy to install.

TheBlackKnight
09/02/2025

Easy Install

Easy install and fit perfect. I definitely recommend this cover for anyone looking to add a smooth look to their truck.

Robert K. Verified
06/28/2024

For 2017 nissan titan

had to put a wood shim 1/4 inch shim down the length of the rail..they don't make it yet for the 2017 titan..but with the wood shim fit perfect...put these on 5 truck of mine already..great product..this top fit for 2015 titan an below...will fit the 2017 with that small shim

Alexander T. Verified
06/22/2024

Alex

My BakFlip was easy to install and looks great. More than happy with this cover.

Mr G Verified
06/18/2024

Great product

I bought this product a few weeks ago and it's great. No leaks, secure and no noise. It was an easy installation. Nice appearance.

Steve C. Verified
06/18/2024

Fairly easy to install and

Fairly easy to install and it looks great on the pickup. Been noticing an almost 2mpg jump on they highway mileage too.

Kendrick
07/17/2026

Great deal. Easy install.

Great deal. Easy install.

Robert
01/02/2023

BakFlip F1

I will update this reciew after i receive my replacement cover. Many issue in receiving 1st, having to reorder.. received it and it does not fit properly. Spoke with CS Manager John and I am supposed to get a new unit. Still waiting, holiday shipping "may" have delayed the replacement. I must say customer service has been great, when you can get them on the phone. Very poor follow up though.

Michael F. Verified
06/18/2024

Ease of operations

This item was extremely easy to install and very easy to utilize. Highly recommend this product.

David B. Verified
06/16/2024

Cover looks great, easy to

Cover looks great, easy to install, drove in a bad rain storm for 75 miles with just a little leakage but nothing got wet.

Greg S. Verified
06/15/2024

Fits great and easy to install

The cover installed in under 30-mins and looks great. The instructions were simple to follow. An extra set of hands to install the rails is helpful to ensure the cover fits well. Nice tight fit will keep dust and water out.

John W. Verified
06/12/2024

Truck bed cover BakFlip

Great appearance, easy to install, well built, extremely satisfied and would recommend to anyone!

David S.
03/20/2025

2019 Ram Limited

Easy to install, beautiful, durable and it looks great. Very good job. You toe the line. Sincerely

John H. Verified
06/11/2024

Love this cover

I think these covers are great. Very easy to install - they are expensive though. Very easy to flip up and have access to your entire bed. Not completely waterproof, but I didn't expect it to be. Not because of the cover, but all the other spots water can get into the bed, mostly around tail gate. Not much, just a little, even after a torrential downpour or car wash. I am completely satisfied with this cover. Exactly what I wanted.

Porter R. Verified
06/04/2024

Perfect fit

The cover fit perfectly to my truck. I wish the drainage system was engineered better but it will suffice. Overall I'm happy with my cover.

Page L. Verified
05/31/2024

BakFlip FiberMax for 2016 Nissan Frontier

I love this cover! I'm a cinematographer, and it keeps my equipment and lights perfectly dry, even in crazy monsoon rains. Yet, I can still utilize my full bed space and keep my bed extender in the back without having to remove anything. I can store my equipment in the back and travel with it all locked up, or I can flip the cover open and film commercials for other trucks right from the bed while someone else drives. It's even better than I anticipated, and I couldn't be any happier!

Christopher D. Verified
05/29/2024

BakFlip FiberMax Cover w/ BakBox

Overall great product! Real easy to install, took about 45 min to install the cover with the BakBox option, The supplied weather stripping seals tight, rained for 4 days after I installed and no water leakage into the truck bed at all, even driving at highway speeds in heavy rain.

Scott
02/02/2025

Great cover

This is my second BAKFlip (bought for a new truck). Installation was easy and I like the look of the fibermax over the earlier versions.

Anthony D. Verified
05/24/2024

Looks greats and made solid

Installation was simple. Opens and lockswith ease, love the way it looks

Cecil H. Verified
11/10/2024

Fibermax

I put this on in about 45 min with my wife help. be careful with the back seal, mine come loose in just a few days. they did send a replacement.

J H. Verified
05/23/2024

Very pleased

Impressed with the quality of the cover. Well packaged. Instructions were clear. Installation was quick and easy with two people. Fit was exact.

Erik M. Verified
05/22/2024

Missouri

Love the cover and it looks great. Ordered a 2nd one for a company truck already. Will use for now on!

Robert
02/02/2025

Second Bakflip I have owened

Second Bakflip I have owened they work great and look good on the truck

HillbillyMafia
08/22/2026

Junk

I had 3 installed by a professional shop. All 3 leaked so bad everything got soaked. Couldn’t been any worse not having a cover at all. They all leaked at the rubber joint that folded and also ran down the wire you pulled to fold the cover. 3 new covers = 3 leaking covers.

Dennis R.
08/02/2024

Awesome Tonneau Cover!!!!

Delivery was fast, received it on the third day. Easy to install with the helpful manual instructions. Looks great and serves the purpose. I'm loving it!

Cosme H.
06/17/2024

Love it

My BAKFlip FiberMax looks great. Glad I bought it. My last cover, won't mention the brand, made my back window vibrate really bad, on the highway. Don't have that issue, now. Great product.

Chad
04/08/2025

It’s a very nice cover

It’s a very nice cover but I think it should have been a little longer. It’s as far back on the bulkhead as it can go and the tailgate barely touches the rear seal.

Henry G. Verified
08/16/2026

Tonneau cover

My cover fits perfectly and was able to install fairly easily, but the instructions could be confusing and I was missing a couple of screws for tie downs.

Tony Verified
07/27/2025

Looks great, but could be better

overall I love this cover. It does leak some water near the center of the cover, but overall it stays pretty dry in the bed. Installing the clips/buckles that mount near the cab was an absolute joke. Shards of metal inside the screw holes prevented the screws from threading all of the way through. Had to drill them out and pull out any metal shards that were interfering.

Joshua Verified
12/10/2024

FiberMax Bed Cover

Product has been pretty great so far. I just wish it had the ability to close the tailgate with the bed cover down.

Byron H. Verified
08/25/2024

Nice cover

I'm very happy with my bad box cover

Charles H. Verified
08/16/2024

Just what I wanted

Fits my 2014 Tundra great. Looks very nice.

Eric Y. Verified
07/09/2024

2015 Chevy DBL Cab

I have no issues with my cover. It looks good and goes well with the truck. It leaks a little but I can live with that.

Jeffrey H. Verified
06/20/2024

Great cover. Instructions poor

In Step 1 of the instructions, there was no mention of where to place the front weather strip on the rail. When I first installed it, it was too far front, resulting in the back strip not overlapping the tailgate. I removed the cover, peeled up the strip, moved about 1.5" back, and reinstalled the cover. It was still too short. Now I nave to get more adhesive to move the strip a 3rd time to get the cover to fit. Instructions should have said to put the initial strip down at the closest edge to the bed. Once I fixed this, the cover is great.

Anonymous
11/17/2025

Return

Sorry I had to return it because it did not fit my truck

John S. Verified
06/08/2024

Great product

I installed this truck cover myself. I found it helped using C-clamps and small blocks of wood to hold the rails in place while you install the perminant clamps.

Paul E. Verified
05/04/2024

Looks great; could be better

Pros: Easy to unpack, organize, and get set up Light enough for one person to install alone Looks Fantastic Mostly waterproof Strong Easy to operate once installed Cons: Really bad installation instructions Parts came assembled backward (clamps) It takes a LOT of adjustment to get it right on the bed NOT a perfect (or even very good) fit Weather strip and foam peeled off on first day Bottom line: Very good product for the money and the level of engineering that goes into the design, beef up the small details! I shouldn't have to re-glue and reinforce foam and weather strip - this really ticks me off for the money I paid. Also, the fit should be a lot better, I have a standard short bed and this is a little too short to fit - why? I like the sturdiness and look of the product and am pleased with the water resistance (now that I replaced the foam and weather strip) - either drop the…

Anonymous
11/13/2025

Terrible service

I have a fleet of trucks and I routinely buy BakFlip covers for them. My most recent purchase was a disaster and disappointing. The cover was shipped with one rail too short. Getting the correct part was nearly impossible. The service people were rude and non responsive. They finally shipped a complete cover kit instead of simply the single part that was needed. We had to then hassle with the whole new kit, then send everything back (minus the single part we actually needed) Terrible service, terrible attitude of service staff. The covers have been great but you better hope you don’t have any issues because they are incompetent and rude to work with.

Conrad H. Verified
03/08/2024

Do not make the mistake of purchasing this item! BK-126309

I purchase this cover for a camping trip, I received this Back flip just in time to install and hit the road. What I didn't realize is an attached paper in the instructions telling me that if I didn't register online for the warranty within 2 week I would lose all warranty. So- on my trip I started having problems with the locking latch and the cable that you pull to open a section of the panel that flips. What I noticed is a small 2 or 3 inch aluminum section that is screwed into the aluminum panel, this panel has 4 set screws attached to keep the cable release stretched tight and locked, but when you bull the cable to open the panels are locked shut, the set screws are stripped out in the aluminum and are laying in the bed of the truck! I have a total of 6 set screws that fell out and you can't re-install because of the aluminum being stripped out. So the only way to fix this is…

James
05/18/2026

Easy to Install

It's solid and was fairly easy to install. I have a 2022 Silverado w/5.5 ft bed. Since it is 1.5" short in my opinion, it leaks, even under a light rsin. I adjusted it so that it covers the tailgate but also still butts up to the front of the bed. I readjusted my gasket to stop it but it doesn't. I really got it for security if I have stuff in the bed. For that, it works well.

Anonymous
10/15/2025

Good not great

Very sturdy. Looks GREAT. Probably keeps your stuff safe in your tonneau, but let’s a good bit of water in when it rains. Overall pretty happy but main reason for purchase was to keep things (golf clubs) dry.

Thomas
05/06/2025

Fit perfect but

Fit and worked perfect but had a small hole on the cover

Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question