Clark
Verified
02/15/2025
BAKFlip on 2018 Tundra
Great product. I recommend BAKFlip, very easy to install
BAKFlip G2 Hard Folding Tonneau Cover for 2022-2026 Toyota Tundra (5'7" Bed)
$1,149.99
Regular price
$1,418.99
Save $269.00
Verify fitment with your vehicle
GO
Clear
Free gifts included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
See it on a truck
Folds open for bed access
Automatic slam latches
Sheds rain and debris
Light solid-core panels
No-drill clamp-on install
Low-profile, lasting finish
Features
- Folds open for bed access: Fold the panels forward to the cab and secure them, and the whole bed is open; BAK says you can drive with the cover fully open that way. BAK's install sheet gives two ways to carry it open: folded and strapped at the bulkhead, or flipped up against the cab on locked prop rods.
- Automatic slam latches: Each panel locks to the side rails as it closes, through BAK's patented rail and clamp system and automatic slam latches. To open it, lower the tailgate and pull the release cable on either side.
- Sheds rain and debris: Precision-fit EPDM rubber perimeter seals and rounded hinges are designed to keep water and debris out, and a built-in drainage system carries off what gets past them through drain tubes. BAK's own sheet notes the cover is not airtight, so it is weather-resistant rather than waterproof.
- Light solid-core panels: The panels have solid cores with aircraft-grade aluminum skins, which BAK says adds strength without adding much weight. BAK rates the closed cover at 300 lb, evenly distributed.
- No-drill clamp-on install: BAK's patented rail and clamp system mounts without drilling into the bed rails on most trucks, and BAK puts most installs at 30 minutes or less with basic hand tools. A few trucks use brackets or bolt-in rails instead; each truck's page shows its own method.
- Low-profile, lasting finish: It sits low on the bed rails, and the corrosion-resistant black powder coat is made to resist fading, chipping and flaking. BAK says the finish meets International Organization for Standardization (ISO) quality benchmarks.
Description & Fitment
Here is the BAKFlip G2 for the 2022-2026 Toyota Tundra, sized to the 5'7" bed. You get a low profile on the bed rails, plus a black powder coat. It clamps on or bolts to T-nuts in the deck rails, and the drain tubes run through a 5/8" hole. Opening it starts with the tailgate down: pull the release cable and lift the panel toward the cab. The 6'7" bed takes 226441 instead. It carries BAK's 3-year limited warranty.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2022-2026 | Tundra | 5'7" | — |
Check your bed: measure along the top of the bed rail from the bulkhead to the inside of the closed tailgate. This cover is for the 5'7" bed.
Not for: the 6'7" bed (226441); the 2007-2021 Toyota Tundra without the Deck Rail System (226409); the 2007-2021 Tundra with the Deck Rail System (226409T). Each of those has its own BAKFlip G2 part number.
About BAK Industries
BAK Industries makes hard tonneau covers for pickups, among them the BAKFlip hard folding covers and the Revolver roll-up line. BAK's install sheets and customer service come from BAK Industries in Springfield, Missouri.
The G2 is the BAKFlip with solid-core, aluminum-skinned panels; BAK calls it the original hard fold cover that set the standard. The F1 and FiberMax are BAKFlip models with fiberglass-reinforced polymer (FRP) tops, and the F1 carries a 400 lb rating and a 5-year warranty.
Authorized BAK dealer. Prestige Truck is an authorized BAK Industries dealer. BAK's warranty is for the initial owner who buys the cover, and BAK states: "Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty to be effective." Keep your order confirmation; contact us for registration help.
Frequently Asked Questions
Will this fit my 2022-2026 Tundra?
Yes, if it has the 5'7" bed. For the 6'7" bed (226441), choose that part instead. Measure along the bed rail from the bulkhead to the closed tailgate, or send us your VIN and we will confirm.
Do I have to drill anything?
Only for the drain tubes: on most 2022 and newer trucks BAK's sheet opens the existing floor hole to 5/8".
How is the G2 different from the BAKFlip F1 and FiberMax?
All three are BAKFlip hard folding covers. The G2 uses solid-core panels with aircraft-grade aluminum skins, is rated at 300 lb and carries a 3-year warranty. The F1 has fiberglass-reinforced polymer (FRP) top skins over a high-density foam core, is rated at 400 lb and carries a 5-year warranty. The FiberMax has FRP top panels on an aluminum substructure, a 300 lb rating and a 3-year warranty.
Will it keep rain and snow out of the bed?
It is built to. EPDM rubber perimeter seals and rounded hinges keep out most water and debris, and the drainage system carries off what gets past them through drain tubes. BAK's install sheet notes the cover is not airtight, so keep anything that must stay dry in a sealed container. Clear snow and ice off before you open it; that is also a warranty condition.
Can I carry cargo on top of the cover?
BAK rates the closed G2 at 300 lb, evenly distributed. Its install sheet also says not to tie cargo to the cover or drive with objects on top of it, so treat the rating as a measure of strength, not as a roof rack.
Can I drive with it open?
Yes. Folded forward, it is held by the straps and buckles at the bulkhead; flipped up against the cab, the prop rods lock it in place. BAK's warranty requires the cover to be secured at all points whenever the truck is moving.
Installation
Install time
30 minutes or less (BAK, most applications)
DifficultyLevel 1simple installation (BAK)
TypeClamp-on, or bolted to the Deck Rail System where fittedthe drain tubes need a 5/8" hole
Tools1/2" wrench or socket and a Phillips screwdriverplus a T-30 Torx driver with a short extension and a drill with a 5/8" bit for the drain tubes
Here's the short version. Follow BAK's install sheet (below) for your truck's exact clamp positions and settings.
- Prep 2022 and newer trucks. On 2022+ Tundras only, press a foam filler pad, adhesive end up, as far forward as it goes against the bulkhead on each side, and stick the cab bumper into the bulkhead valley.
- Mount the side rails. Without the Deck Rail (cargo management) system, set the rail's L-shaped top on the bed rail and fit three clamps per side (6-8" from the bulkhead, middle, and near the tailgate), tightening the middle one first. With it, remove the end caps, slide three T-nut kits into each accessory rail and bolt the front halves of three clamps in the side rail to them with the 5/16" hex bolts, flat washers and lock washers. Either way, push the rail (drain end) against the bulkhead and tighten to 10 ft-lb with a 1/2" wrench or socket; don't over-tighten.
- Route the drain tubes. Fit the drain tubes to the front of the side rails. On most 2007-2021 trucks, drill a 5/8" hole through the rubber plug in the bulkhead on each side; on most 2022 and newer trucks, open the existing floor hole up to 5/8". Run the tube through.
- Fit the cover. Slide the two cover retainer clamps into the track under the cover near the cab, and screw the two strap buckles to the front panel by hand with a Phillips screwdriver (BAK says no screw gun). Set the folded cover on the rails at the cab end, centered between them, and turn the retainer clamps clockwise until the lock washer is secure. Don't fasten the retainer clamps to the front cargo rail.
- Unfold and square it up. With the cover still folded, clean its top edge where it meets the cab (soap and water, then isopropyl alcohol) and stick the cab bumpers along it. Unfold the cover to the tailgate and check that each panel is centered side to side and front to back; the tail panel should overlap the tailgate by about 1/2". Shift it on the loosened retainer clamps if needed, then re-tighten them. With a power tailgate, make sure it still opens and closes with the cover shut.
- Check the latches. Release each latch to make sure it catches the side rails; the sheet shows how to adjust a slam latch that hits or misses. BAK's warranty asks you to re-check every clamp after the first week of driving and now and then after that.
Stuck on a step?
What's included
- Hard fold cover
- Driver and passenger side rails
- 2 cover retainer clamps
- 6 clamps
- 6 T-nut kits (5/16" flat washer, lock washer, hex head bolt)
- 2 filler pads and 2 cab bumpers (2022+ trucks)
- 2 buckle ends with gaskets, screws and nutserts
- 2 drain tubes
- 3 D-shaped cab bumpers
Specifications
| Brand | BAK Industries |
|---|---|
| Part Number | 226440 |
| Product Line | BAKFlip G2 |
| Cover Type | Hard folding |
| Panels | Solid core, aircraft-grade aluminum skins |
| Finish | Black powder coat |
| Load Capacity | 300 lb, evenly distributed |
| Latching | Automatic slam latches, patented rail and clamp system |
| Seals | EPDM rubber perimeter seals, rounded hinges |
| Drainage | Built-in, with drain tubes |
| Bed Access | Full, folded to the cab |
| Mounting | Clamp-on, no drilling into the bed rails on most trucks |
| Install Time | 30 minutes or less (BAK) |
| Warranty | 3-year limited |
| Fits | 2022-2026 Tundra, 5'7" bed |
| Bed Length | 5'7" |
| UPC | 192631044680 |
More media
9 videosWarranty, shipping & returns
-
3-year limited warranty
BAK covers the BAKFlip G2 against defects in materials and workmanship for 3 years from the original purchase date.- BAK's limited warranty runs three (3) years for its G2 and FiberMax covers, from the original purchase date.
- A defective cover or hardware part is repaired or replaced at BAK's option. BAK may instead substitute a newer model of similar form and function, offer a warranty discount on a complete replacement system, or provide another remedy.
- It covers the original buyer only and is not transferable. BAK states: "Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty to be effective." Contact us for registration help.
- To keep it valid: clean only with mild automotive soap and water; keep the cover secured at all points while the truck is moving; check all clamps and retention parts for tightness after the first week of driving (and after any re-install) and now and then after that; clear snow, ice and anything else off before opening; and never tow the truck from the rear with the cover on (take it off and store it first). BAK's install sheet adds that insect repellents, oils, solvents and lubricants can damage the rubber hinges and seals and void the warranty.
- Claims: get a Return Material Authorization (RMA) number from BAK customer service before sending anything back. BAK may ask for the part, postage prepaid, to make a final decision; shipping charges apply to a repair or replacement, with no other charge.
- Not covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that isn't a defect in materials or workmanship.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- The cover travels in a long, heavy box, by freight or as an oversized parcel depending on its size.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
This cover ships in a long, heavy box. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.
What our customers say
4.6 · 1589 reviews
Photos from owners
+49
Shelley C.
Verified
02/23/2026
Love it
Easy to install! Great fit love it!
Jason W.
Verified
09/01/2024
Perfect!
Cover installation was super easy, done in 30 minutes. Looks great and keeps the water out of the bed while still leaving the stake pocket holes open for use of a ladder rack or other system.
John B.
Verified
03/22/2024
We purchased 2 of the
We purchased 2 of the covers and are very pleased with them. The service was friendly and professional. Would buy from this company again. Thank you
Guest
12/19/2017
Bakflip G2 on my 2017 TRD PRO
Had a soft tonneau cover on my last truck from a different company just because it was cost effective. But always wanted a G2 every time I saw one on a truck I would catch myself starting and that feeling of jealousy this go around it just had to happen for this Tundra and had it on almost a month now and I'm loving it. So clean of an install and secure and I love that it's flush from the sides no bulging. Thanks Bakflip.
Orion S.
Verified
03/07/2024
2004 Toyota Tundra Double Cab BakFlip G2
Fit perfectly, had a old solid tonneau cover that really limited bed access and required complete removal if I wanted to put anything big in there. This solved that issue, install took less than 30 minutes and keeps water out well enough, few drops nothing crazy. Also still allows for access to the 4 uprights
George M.
Verified
01/30/2024
Fits perfectly and looks great
I have a 2003 Toyota Tundra and was sure I'd never get a tonneau cover to fit a 20-year old truck. Not only did this one fit--it was exactly what I wanted. Really easy to install by myself (with a little help from my wife). I've now had many compliments on how good the cover looks. I'm very pleased with it.
Robert D.
Verified
01/27/2024
I recently installed the Bak
I recently installed the Bak Flip G2 Tonneau Cover on my 2007 Toyota Tundra Crew Max. The installation was easy and the cover was installed and working perfectly in less than thirty minutes. I love the way it provides lockable security to the truck bed and doesn't change the look of the truck when viewed from the side. It is versatile in that it allows the user to carry all size cargo by simply flipping one or all of the sections. I highly recommend the Bak Flip Tonneau Cover. To me it enhanced the look of the truck as opposed to some covers that can detract.
Jay
Verified
06/27/2026
Great product it was one
Great product it was one of two pieces first piece got delivered to the wrong address. Had to hunt it down. That’s the only problem my head.
Jason
Verified
08/01/2026
Decent Fit
This is my second Tundra that I’ve used the BAKFlip on. This seems to have some seal improvements. Easy to install. Still a little worried about the fit around the tailgate. Not sure water won’t get in.
Scott
06/30/2026
Great customer service! Highly recommend
I ordered the wrong size cover at first, they were very prompt into getting the right size cover to me. Very impressed with the customer service I received.
Robert W.
Verified
08/15/2025
good bed cover
Instructions for installation were not good. It was easy to install once i figured out the instructions.
Fred S.
Verified
03/05/2024
The shipment was timely and
The shipment was timely and complete. Sadly I had made an error in ordering the wrong part. This resulted in the need for an RGA. Although the mistake was expensive they handled the situation smoothly.
Ben M.
Verified
01/22/2024
No problem so far, however
No problem so far, however if you have a Tundra you will have to modify the drain hose. The hose is to large to fit in the precut holes in the bed.
Jason M.
Verified
02/27/2026
Happy Silverado owner
Worth every dollar and easy to install . Looks tremendous .
Anonymous
05/02/2026
Excellent Eperience
Not only is this a high quality product, I accidently ordered the incorrect size. Bakflip returned it at no expense and shipped out the correct one immediately. I was beyond impressed and happy.
Leslie J.
Verified
10/08/2026
Great product
The only complaint I have is the total length of the tonneau cover is a little too short, I've tried adjusting it but barely fits. I like the way it locks every panel and also able to fold it up to the cab.
Gordon G.
Verified
09/07/2026
Poor manufa and packaging
Mine came with lots of small metal shavings in the packaging. One of these shavings left a scratch on the top side of the cover about four inches long.
Ulises Y.
Verified
11/13/2025
Perfect for me
I had the same cover on my other truck so I already knew what to expect. Its not completely water proof some water does seep in but not much. I can deal with it for the protection I get. The quality is top notch and. I would definitely recommend getting this if you like to keep things in your bed and want to know they will be there when you need them.
Timothy
Verified
06/13/2025
Awesome cover
Great quality easy to install. Could do without the annoying review reminder emails showing up at 6:30am on a Saturday morning.
Phillip
Verified
04/14/2021
Bakflip G2
This cover is perfect for what I need. It was easy to install and looks great. While keeping my bed protected I'm able to fold it all the way up and access my full bed of truck when needed.
Anonymous
02/19/2026
Great cover
I have had several hard covers on my trucks and this one is so far the best. Especially like the security it provides and the ease of opening and closing.
Angel B.
Verified
10/04/2026
Bakflip2
Great bedcover, easy to install, great fit on my 2024 Nissan Frontier.
Chantel W.
Verified
10/02/2026
I like it. It fits
I like it. It fits nicely looks good. Was easy to put together and put on my truck.
Jon J.
Verified
09/29/2026
Backflip G2
Love the look, the sturdiness of the product. Easy to install and to fold. The last fold is a little heavy but not bad.
Lawrence K.
Verified
09/24/2026
Tundra Takes More Effort
More steps to install on a Tundra, but worth the extra effort. I have had several covers on other trucks, Titans and Tundras and they all allowed a “little” water in the bed, but not this one! Been through the car wash three times since installed and the only water was at the tailgate. Very impressive. Cover looks great on my truck!
Anonymous
12/29/2025
02 Tundra
Fits perfect. Nice asset on my truck. Easily installed.
Brent G.
Verified
09/24/2026
Easy to install, instructions easy
Easy to install, instructions easy to follow
Ignacio S.
Verified
09/19/2026
Thumbs up
Easy install and excellent quality
Eddie L.
Verified
11/13/2025
Brackets are having issues
Overall it works well once I got it set up. I am running into one issue with the caps on the end of the rails being pushed off and all janky due to slip
Jesus L.
Verified
09/16/2026
Good quality and price and fast delivery
Very easy to install. Great quality and price Very helpful and fast delivery thanks
Richard O.
Verified
09/15/2026
Truck Bed Cover
Fits perfect, Shipping was great and no damage.
Troy B.
09/03/2025
BAKFlip G2
Great cover very easy to install.
kevin l.
Verified
09/13/2026
Perfect fit
Exactly as described and fit my pickup bed perfectly. Amazingly easy to install. Highly recommend this product and business.
Tamara D.
Verified
09/13/2026
Gets five stars! Awesome cover
Gets five stars! Awesome cover and makes the truck look so good! Was easy to install with no problems. Great customer service and they were so helpful!
robert d.
Verified
09/11/2026
Really great fit and easy
Really great fit and easy to install only bad thing was some of the screws was missing
Michael J.
Verified
09/09/2026
Great cover
This is a excellent cover, easy installation and looks great. This is the second G2 I've purchased over the years. Highly recommend
Edmond
06/19/2025
good stuff
great product second truck , second Tonneau
Mike B.
Verified
09/05/2026
Backflip tonneau
Love it. Let’s me use full length of bed.
Steve J.
Verified
09/04/2026
Great cover, easy to install
Great cover, easy to install and simple to operate. Good look for the Ram 1500
Terry S.
Verified
09/04/2026
BAKFLIP for Ford F-150
Placed this cover on my 2018 F 150 a few years ago and like it. I am replacing the existing cover on a 2015 F 150 that was recently purchased with a BAKFLIP.
Jared
Verified
08/30/2025
Bakflip G2 tonneau cover
Cover did not fit with my bed liner even though it says it will. So I had to cut parts of my bed liner out!! My tailgate doesn’t fully close now. Because the rails are a tiny bit longer than my box. Also directions were very poor. Had to adjust the cover to fit my box which was quite easy although directions did not explain how to, so it took me 4 hours to install!! Lastly it is not fully water proof water gets in my box at the 2 corners closest to the cab. Not worth the money!
Eugene B.
Verified
09/03/2026
It works very well and
It works very well and was easy to put on
Gregory S.
04/26/2025
Toyota Tundra Crewmax
I have had my backflip cover now for 7 years on my 2011 Tundra Crewmax and plan to order one for my new 2018 Tundra Crewmax once it arrives. In regards to customer service, they are excellent. I needed to replace a plastic hinge for a prop rod that braces the cover when it is folded up against the cab so I called the company and they mailed me a new hinge and rod at no charge even after 7 years!!
JIM S.
Verified
09/03/2026
Quick delivery- G2 was a
Quick delivery- G2 was a perfect fit and easy to install ( this is my third backflip)
David R.
Verified
09/02/2026
BAKFlip G2
Prompt shipment, installation straight forward. Too soon for detailed review but so far so good.
Edward M.
Verified
08/19/2026
Great fit, easy installation
Installed Gen 2 BAKFlip on 2024 Ram 2500 8’ bed. Fitment was perfect and the top looks awesome. All operates as advertised and is of good quality materials.
William
Verified
08/16/2026
Very nice cover
I installed this unit by myself so it's that easy. It looks great and fold nice and easy. I actually walked on it and it felt very sturdy. The only thing I didn't like was the tube for the rail system drain is in the front of the bed and I have to drill a hole to relieve water. Overall well worth the money.
Rick M.
12/30/2024
Great Vendor
I'd highly recommend this vendor for all your Tonneau Cover needs. They delivered as expected and in great shape.
Dennis
Verified
08/15/2026
Awesome looking
Awesome looking
Henry
Verified
08/15/2026
Total security
I know wonder why I waited so long … it’s great !
Russell W.
Verified
08/14/2026
2026 ford ranger raptor
Great fit
Robert
Verified
08/13/2026
Bakflip tonneau cover
Love this cover very easy to install and use after washing and any rain i have had no water in my bed very well made and very pleased with this cover would highly recommend it
Mark
Verified
03/25/2026
2021 GMC Canyon BAKFlip G2
I choose this tonneau cover because of the flush fit it has over the truck bed. It looks very nice. The down side is it does get some water in the bed when it’s closed from the tail gate area. This happens while washing the truck or in heavy downpours. At the front of the bed, the seal strip that’s provided could be a little bit thicker for us guys who don’t have a bed liner yet. When the product arrived and I opened the box, there was aluminum shavings on the cover itself. I had to clean it off before installing it. Over all I do like the bedcover.
Korn1275
07/27/2024
Better Than Expected!
The construction is good and it looks great. My only reservation was the the latch hardware be made of something more durable than plastic. Installation was fairly simple.
Sherwyn S.
Verified
08/12/2026
Outstanding
Fits well and easy to install.
Taylor
Verified
08/09/2026
BAKFlip G2
This cover is awesome
Thomas
Verified
07/27/2026
Light weight easy installation
installation took less than one hour with a few common tools. the cover is light weight to open, and looks great. I highly recommend this model vs the G4, which I have on another truck.
David
Verified
07/26/2026
Best Christmas gift ever!!!
Received this truck cover from my wonderful wife because I didn’t want to spend the money on a cover. Well, if I had known how great this product was, I would have purchased it years ago. It was easy to install and it makes my truck look so much better…looking forward to many years of using this cover.
Jeast
03/28/2024
Awesome Tonneau Cover
The cover arrived quickly, was very easy to install, had all the hardware needed. Looks great, great fit and so far keeps the storage area dry,
Bob
Verified
07/21/2026
Siverado
Went on very easy and looks great!
Gordon G.
Verified
07/19/2026
Bak flip tonneau cover
Fits well and works great.
Joseph
Verified
07/15/2026
Solid design
Solid built and easy to install 3 folds back gives ample space for towing my 5th wheel camper Afterwards it keeps my hitch clean and out of the weather
Gregory
Verified
07/08/2026
Bakflip G2
Great cover. Strong, sturdy, easy to install and looks great.
Stan Y.
02/26/2025
Bakflip G2 bed cover
Overall the cover installed easily and looks great. I gave it minus one star because the rubber seal along the tailgate is deformed for a couple inches and allows water to enter the bed. It’s been a couple weeks and the deformed/raised area still hasn’t laid flat.
Barry A.
Verified
01/24/2025
Not a great fit.
The package didn’t come with any small adjustment pads for the rail and it wouldn’t level up. Lucky I had something that would work for a level rail. Then once installed 2 of the snap clips that hold the liner down won’t snap on the rail.
Clarence
Verified
07/07/2026
Love my Tonneau
Newbie to Tonneau covers and I discovered the BakFlip folding cover. The installation was not difficult and the look and fit is clean. Would highly recommend it.
Stuart
Verified
06/23/2026
Stuart
Arrived sooner than I expected. Fit perfect and looks great
Wilbert
Verified
06/16/2026
Great! I love it
Great! I love it
Grant
Verified
06/16/2026
BAKFlip G2
I had one on my last Tacoma so I certainly had to have one on my 2020 Tacoma. Love the fit and installation was a breeze.
EddieB.
07/17/2026
Great hard folding tonneau cover
Really nice tonneau cover, went in without issues. Keeps my bed dry and secured and looks good with it's low profile.
Bryan K.
Verified
06/06/2026
Bakflip G2
Even nicer than I thought it would be. Easy install, looks great, wished I wouldve bought it sooner.
James
Verified
06/04/2026
good cover
good cover
Richard
Verified
06/01/2026
BAKFlip G2
This is exactly what I was looking for. Built well. Easy to install and low profile. Also, it looks great.
Brian
Verified
05/28/2026
Best cover
This is the best cover out there we absolutely love this truck cover.
406ram
05/22/2026
Great quality
This is an awesome product I have had a handful of these tonneau cover and I'm very impressed.
Benjamin
Verified
05/22/2026
It was easy to install
It was easy to install - I completed it by myself. Probably 45 minutes or less.
Adam
Verified
03/12/2026
Decent cover
I really like the looks of the cover on my truck. Although i have noticed it seems like the black is already beginning to chip away in various spots. I had a frustrating time when it came to delivery of the product, recieved without hardware for installation. Had to wait a few extra days for that to arrive. Found one of the seals to be cut. Modified it so i didnt have to deal with returning and reordering process. I like the ease of operation of this cover.
Richard L.
Verified
05/22/2026
BAKFlip G2 Bedcover for 2026 Chevy 2500
The cover was boxed up very good and arrived with no damage. It was easy to install and very good quality. The last one that I had on a different truck was tri fold and this one is quad fold which allows me to open first panel with one arm without straining my shoulder.
Carlos
Verified
05/12/2026
Great Look
Fits like a glove 👍🏽
Charlie B.
Verified
12/12/2024
Clamps – not good
Generally, this tonneau cover is sturdy as described and looks great on the truck. However, there must be a better system to attach the rails. The clamps were unwieldy. The directions were difficult to figure out, and I had to take it off and put on two times to get it right. Because it came loose, I generally drive with a bit of a nervous stomach, thinking it’ll pop off at any time.
Jim D.
10/11/2024
Bakflip
The Bak Flip needs to be a 1/4 inch wider to ensure all cover flip cover locks engage when closing the cover.
David S.
09/02/2026
It leaks
Good secure cover. . . but it leaks
Peter Z.
Verified
10/16/2025
Good, but could be better
Disappointed that when I got it out of the box one of clips for the strap/buckle was completely broken. Protects from water for the most part unless parked at an angle in which case your bed completely gets drenched.
Ray F.
Verified
08/10/2024
Disappointed
The fit and adjustment of the latches is subpar. The rail ends are not designed well and should engage the rails more to provide secure fitment. The rail ends will be one of those things that be a point of frustration. disappointed.
Jose D.
Verified
06/10/2025
Could be better
I have bought in the past and installation and fit was good. Bought for my f-250 and had to make some adjustments to rails. Also it has a hard time engaging at tailgate area. Need to force it to close. Hopefully with some wear it will close better.
Damien G.
Verified
07/02/2024
Leaking cover
I had the cover for about a week and closed it one day to find that one of the rubber pieces had pulled out from where it was positioned leaving a big hole where water continuously leaks threw
Wernher
Verified
05/23/2025
The finish of the big
The finish of the big flap closest to the cab is much more shiny than the other 2, and it seems to have a slightly different texture as well. It is definitely from a different batch of material, therefore the difference in the finish.
Ken W.
Verified
03/07/2024
basic design is good- missing
basic design is good- missing two lockdown bolts, washers and knobs- even if i had them they wouldnt fit in the front holes next to the drain- the prop rod for the cover has broken on the left side already- cheap fasteners not able to handle the load-
Matthew
Verified
05/20/2025
Very nice cover, fairly easy
Very nice cover, fairly easy install, but the rubber sealer strips along the rails at all four corners were just glued one over the other and peeled apart as soon as I installed the cover. Also seemed to somewhat leak through bi-folds during heavy rain, as top of cover from the inside seemed wet. May have just run across from the side not entirely sure.
Keegan C.
Verified
07/28/2026
Do not buy for a Ford Ranger
Great bed cover as a product, but the Ranger specific instructions were hard to follow, not well written, and lacked the necessary level of detail. The workarounds needed to make the bed cover fit and work as intended leave little faith in the stability and longevity of the product. It is as likely to fly off the bed as stay secured. This would have been returned had I not already installed most of it, resulting in visible signs of use. I have a friend with a Colorado, and the bed design is much more suited to this cover than a Ranger. It required no modifications and is a perfect fit.
David K.
Verified
03/10/2026
Not good
Ordered the cover for my 26 Honda Ridgeline. After installation of the rails, the cover does not properly lock into place. Brought the truck to a certified installer and they could not get it to properly lock/fit. Customer service has been slow to respond and keep requesting additional photos. 3 weeks later , they tell me the brackets were not installed properly. I get it if it was just me doing the install, however, the certified installer ripped everything down when I brought it to them. These are the folks they recommend to install their tonneau covers. Regardless, this could be an isolated incident but I still do not have the cover installed. Rather get a refund and move on to a different brand.
Donald K.
Verified
06/17/2025
False advertising.
Has been on order for over two weeks and not shipped. Have called and chatted and get no information for the delay. My credit card was charged when ordered and will be due soon. I will have to challenge the charge and refuse to pay if not at least shipped. I feel like I have been ripped off by false advertising.
Robert K.
Verified
06/15/2025
Order Pending. . . . . . .
I don't know why I'm being asked to review a product that has been "Pending Fulfillment" for nearly 3 weeks. I've had other BakFlip products in the past & have been very happy, so I'm expecting the same if I ever receive it.
Brent M.
Verified
06/12/2025
Never got it
Ordered in late may and canceled June 11th. I opened a ticket and waited 3 days. No response. Called again and got the same run around. Poor service top to bottom. Sad.
Jerry F.
Verified
06/07/2025
Order Status
After 3 weeks of placing order, I check status and it still says pending fulfillment. I've called twice, spent about 45 minutes each time on hold. They say they will check and call back. No call backs. This company sucks.
Chris K.
Verified
06/06/2025
3 weeks still haven’t received my tonneau cover.
I was asked to review a product I still have not received.
Jay L.
Verified
06/04/2025
Order not received
Its hard to rate something that's not tangible, but should be.
Gordon C.
Verified
06/01/2025
The cover leaks when subjected
The cover leaks when subjected to the car wash system, or especially when driving in moderate to heavy rain.
Todd C.
Verified
05/23/2025
Never received it
Still waiting for it and no one can give me an update, really.
John A.
Verified
01/30/2024
It is to long for
It is to long for the bed. If i put the seal on the front of the bed then the back seal is out over the tailgate. If i line the seal up to the tailgate then the seal is out in front of the bed. IN the corners there is a gag of about 1/2" by 1". The paint is bare in several places on the cover. I bought to be water tight and it is not. would not recommand this to another person. Thanks John
Stephen L.
08/16/2026
NOT THE ORIGINAL
THIS IS NOT THE ORIGINAL! I had an original BAKflip and it was great. Got a new Tacoma and bought the E-Z flip and returned it because when folded the cover didn't reach the cab and hung out. So I returned it for the sure thing, the original that I had bought previously. IT IS NOT THE SAME COVER. The panels are different sizes, which changes the hing points, mounting is different and sucks, you have to shim it! This is an example of taking something which isn't broken and ruining it.
Cameron
07/14/2026
BakFlip
Install was way more difficult then expected. Still have leaks and having to use additional double sided tape. When folding up, gets off track and also doesn't lock without force...... Happy with the look, but going to take time to get it dialed in
Allynjo
07/19/2025
Not bad but not great
The versatility is great with being able to use entire bed of truck . The fit is not the best , I noticed when washing the truck i do get leaking in all four corners . When shipped to me the arm that holds the cover up in the folded position wasn't attached completely from the factory however the customer service at Bakfip were very good and fast at shipping me not only a whole new set of rails but the updated version with better clips that store the prop rods . Over all for 900 plus dollars expected better but I'm sure I'll be happy with it
Anonymous
03/22/2025
Great but...
I purchased this after installing one on a buddies truck a few years ago. I love how low profile this cover is! My only gripe was that mine came with no instructions. You may say "oh just look it up" well yes I did and proceeded to panic because none of the manuals had whatever version I got/ all the videos showed different rails. So to help those that may get the same thing I'm posting pics because I was very confused until I had a brain blast and got the cover installed. Took about an hour by myself and that's with all the panic and swearing lol
Joe
11/09/2024
It’s okay
Going into purchasing the mx3 I knew it was going to be pretty good at keeping water out and it has. After installing and put in the rain the first night there were a few drip spots and I was fine with it. And the last latch doesn’t really clip on after putting the last panel down. You need to pull the tension wire for it to lock in. Would need to ask for more clamps to possibly not make that issue happen anymore. Other than that it’s a great cover.
Rodolfo G.
10/07/2024
Nice Cover But Needs Work
I gave this a 4 because the manufacturer skimps on hardware. Where there should be four screws like on “All Pane Latches” there are only two diagonally. There’s no height adjustment for the rails, and when fully opened against the back of cab, the bumpers should be mounted on the cab. Otherwise if driven in that configuration it will scuff and rub the paint on the truck’s cab. The two rear latches need to be modified to prevent being opened with a wire or slim-jim. I’m disappointed that I saw you advertise that no longer have to close tail gate first, but mine has to be done as the old production. Other than those minor shortcomings it’s a nice functional idea and product.
Larry
03/27/2020
I love my new back
I love my new back flip. One minor problem was the clip that holds the rod was broken can you send me a new one please