The redesigned 2023-2026 Colorado and Canyon get the easiest-opening MX4 in the lineup. A lift-assist system and one-handed paddle handle drop the effort to about 10.5 lb, so popping the cover on the tall-sided 5'2" bed of this third-gen midsize takes a single hand even with the other one loaded. Below the assist hardware it is all MX4: heavy-duty aluminum, sealed against the weather, and locked when you walk away.
What's Included:
(1) BAKFlip MX4 EZ-Lift folding cover assembly
(2) Clamp-on mounting rails
(1) Tailgate seal
(1) Hardware and clamp kit
(1) Installation guide
Features
EZ-Lift Assist, 3X Easier to Open The signature EZ-Lift assist does the heavy lifting for you. Fold the cover up with one hand using about one-third the effort, roughly 10.5 lb of lift versus nearly 30 lb on a standard hard-fold cover, so opening the bed is genuinely effortless.
Effortless One-Handed Paddle Handle An extra-large paddle handle at the tailgate is easy to find, grab, and squeeze with one hand. EZ-Lift unlatches automatically as you lift, so there is no separate release step, and self-unlatching middle panels do away with manual cable pulls.
The Most Secure MX4 Ever A first-of-its-kind paddle handle pulls the cover into a tighter latch, and the patented auto-latch system locks the moment the cover closes. Fewer steps, and more security than any MX4 before it.
Heavy-Duty Aluminum, 100% Bed Access Premium multi-layer aluminum panels over a high-density core fold flush against the cab for full bed access, then fold back and auto-latch closed. Rated for 400 lb evenly distributed on the closed cover, and it never blocks your third brake light.
Weathertight Sealing and Drainage EPDM perimeter seals and tight-fit clamps seal the bed edge to edge, and an integrated drainage system routes water off the cover so your cargo stays dry in rain and at the car wash.
Automatic Latching Security Panels latch down automatically as the cover closes. With the tailgate shut and locked, the bed stays locked and weathertight.
No-Drill Install, Made in the USA Bolt-on clamp rails install in 30 minutes or less with no drilling. Assembled in the USA and backed by a 5-year warranty with US-based support.
MX4 Line-Up Comparison
How the BAKFlip MX4 EZ-Lift compares within its BAK family:
Feature
BAKFlip MX4 (Gen 3)
BAKFlip MX4 TS (Gen 3)
★ BAKFlip MX4 EZ-Lift
Core Feature
The original benchmark
Rack-ready versatility
3X easier to lift, most secure MX4
Platform
Gen 3
Gen 3
Gen 3
Security Level
Enhanced
Enhanced
Maximum protection
EZ-Lift System
No
No
Yes
Lift Effort
Standard
Standard
Lightest (10.5 lbs)
Built-In Rack Compatibility
No
Yes
No
Durability
Premium-grade
Premium-grade + Multishield coating
Premium-grade
Weather Protection
Advanced
Advanced
Advanced
100% Full Bed Access
Yes
Yes
Yes
3rd Brake Light Visibility
Yes
Yes
Yes
Weight Capacity
400 lbs
400 lbs
400 lbs
Temperature Rating
Tested -40 to 180 F, up to 95% humidity
Tested -40 to 180 F, up to 95% humidity
Tested -40 to 180 F, up to 95% humidity
Installation
Click-in clamps, DIY, under 30 min
Click-in clamps, DIY, under 30 min
Click-in clamps, DIY, under 30 min
Warranty
5 years
5 years
5 years
Fitment & Compatibility
Years
Make
Model
Bed
Fit
2023-2026
Chevrolet/GMC
Colorado / Canyon
5'2"
✓ Yes, direct clamp-on fit with EZ-Lift assist
Fit guidance: Fits the 2023-2026 Chevrolet Colorado & GMC Canyon with the 5'2" (61") bed. This is BAK/RealTruck's marketed bed length; labels vary by source and tape-measure figures differ by where you measure, so confirm your exact bed and configuration if you are unsure. Not compatible with beds outside the listed length.
Specifications
Cover type: BAKFlip MX4 EZ-Lift hard folding (tri-fold) tonneau cover with lift assist
Lift assist: EZ-Lift assist, opens about 3X easier (approx. 10.5 lb of effort vs nearly 30 lb)
Handle: Extra-large one-handed paddle release at the tailgate
Material: Heavy-duty aluminum top panels with high-density polymer cores, aluminum side rails and frame
Finish: Textured matte black, all surfaces
Bed length: 5'2" (61")
Bed access: 100%, folds flush against the cab, does not block the third brake light
Weight capacity: 400 lb evenly distributed on the closed cover
Sealing: EPDM perimeter seals, tight-fit clamps, integrated water drainage
Security: Automatic latching panels, locks with the tailgate closed
Drilling required: No, clamp-on rails
Install time: 30 minutes or less, one person
Assembled in: USA
Warranty: 5-year limited
Installation
Type: Bolt-on, clamp-in, no drilling · Time: Under 30 minutes · Tools: Basic hand tools · Difficulty: One-person, DIY-friendly
The EZ-Lift installs as a bolt-on using the included tight-fit clamps with no drilling. Set the rails on your factory bed rails and level them, seat the folded cover, connect the clamps, then adjust the perimeter and tailgate seals. Most installs finish in 30 minutes or less with basic hand tools. Watch the model-specific install video above and follow the printed iSheet for clamp placement.
Watch the model-specific installation walkthrough:
Resources
Everything you need for your BAKFlip MX4 EZ-Lift Hard Folding Tonneau Cover for 2023-2026 Chevrolet Colorado & GMC Canyon, in one place.
Warranty. 5-Year Limited Warranty from BAK / RealTruck against defects in materials and workmanship, backed by US-based product experts. It does not cover accident damage, neglect, or improper installation.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
About BAK Industries
BAK Industries has engineered premium truck bed covers in the USA for decades and is a flagship tonneau brand of RealTruck, one of the largest truck-accessory manufacturers in North America. Its hard-folding BAKFlip and retractable Revolver lines set the benchmark for the category, pairing heavy-duty aluminum construction with a low-profile, weathertight design.
Every BAK cover is built for real-world truck use: no-drill, clamp-on installation that mounts in about 30 minutes, full bed access when folded or rolled back, and reinforced latching that keeps cargo secure and dry. The lineup runs from the value-focused BAKFlip MX4 and G2, to the flagship FRP-panel F1 and FiberMax, to the industrial Revolver X2 and X4s roll-ups, covering nearly every popular truck and bed length.
Backed by US-based product support and a multi-year manufacturer warranty, a BAK cover is a buy-it-once upgrade that protects tools, cargo, and gear while giving a truck a cleaner, more finished look.
Authorized BAK Industries dealer. Prestige Truck is an authorized dealer of BAK Industries, so every tonneau cover and accessory you buy is 100% genuine and factory-new, covered by the full BAK Industries manufacturer warranty, and backed by our own US-based support team.
Keep Your Truck Bed Dry With The MX4 EZ-Lift
This official RealTruck video focuses on how the MX4 EZ-Lift keeps weather out, with edge-to-edge EPDM sealing and an integrated drainage system that routes water off the cover so your cargo and bed stay dry in rain and at the car wash.
Opens 3X Easier
The EZ-Lift assist carries most of the weight, so the cover folds up with about one-third the effort of a standard hard fold.
The signature EZ-Lift assist does the heavy lifting for you.
One-Handed Paddle Release
The oversized paddle handle unlatches and lifts the cover from a single point, even with your other hand full.
An extra-large paddle handle at the tailgate is easy to find, grab, and squeeze with one hand. EZ-Lift unlatches automatically as you lift, so there is no separate release step, and self-unlatching middle panels do away with manual cable pulls.
Frequently Asked Questions
Straight answers on specs, fit and support
Will the MX4 EZ-Lift fit my 2023 Chevrolet Colorado & GMC Canyon with the 5'2" bed?
This cover is built specifically for the 2023-2026 Chevrolet Colorado & GMC Canyon with the 5'2" bed, so it is a direct clamp-on fit. Bed lengths are marketed a few different ways and tape-measure figures vary by where you measure, so if you are between sizes, measure your bed and match it to the 5'2" listing before ordering.
What makes the EZ-Lift different from the standard MX4?
The EZ-Lift adds a built-in lift assist and a large one-handed paddle handle, so the cover opens about 3X easier, roughly 10.5 lb of effort versus nearly 30 lb on a standard hard-fold cover. It also keeps your third brake light visible when folded. Everything else, the aluminum panels, sealing, security, and 400 lb rating, matches the MX4 family.
Can someone get into the bed when the cover is closed and locked?
No. The panels latch down automatically as you fold the cover closed. With the tailgate shut and locked, the cover cannot be opened from outside, giving you weathertight, lockable bed security.
Is the cover waterproof, or will water get into the bed?
It is built to be weathertight rather than fully submersible. EPDM perimeter seals and tight-fit clamps block rain and car-wash spray, and an integrated drainage system routes water off the cover and out through drain tubes. Like all folding covers it is water-resistant, not waterproof, but it keeps rain and spray off your cargo in normal use.
Do I need to drill into my truck to install it?
No. The MX4 EZ-Lift clamps onto your factory bed rails with the included clamp-on rails, with no cutting, trimming, or drilling, and it installs in about 30 minutes with basic hand tools.
How much weight can I set on the closed cover?
It is rated for 400 lb evenly distributed across the closed panels, which is fine for gear, a cooler, or a sheet of plywood laid flat. It is not meant for concentrated point loads.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
