BAKFlip MX4 hard folding tonneau cover closed on an orange Toyota pickup
BAKFlip MX4 tonneau cover partly folded on a faded pickup with a Best Seller badge
Tonneau cover folded up to the cab with the bed loaded, captioned full bed access
View from the tailgate of the BAKFlip MX4 folded against the cab, captioned America's best-selling truck bed cover
Steel toolboxes stacked on the closed cover panels, captioned built stronger
Water splashing on the cover panel surface, captioned sealed edge-to-edge
Ghosted pickup showing the BAKFlip MX4 panels with a New and Improved badge
Close-up of the BAKFlip MX4 rail with the automatic latch outlined, captioned automatic security
Hand tightening a BAKFlip MX4 rail clamp with a ratchet, captioned easy one-person install
BAK badge on the BAKFlip MX4 rail end cap
Best-in-class warranty shield over the BAKFlip MX4 panel texture

BAKFlip MX4 Hard Folding Tonneau Cover for 2005-2015 Toyota Tacoma (5'1" Bed)

$1,199.99 $1,503.99 Save $304.00
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear
Flash Sale Ends in--:--:--

Free gifts included with your order

Details
Details
Details
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
  • Guaranteed FitmentTeam-confirmed fit or money back
  • No Sales TaxZero sales tax on every order
  • 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

+1 (470) 823-2453 Email Us
Locks the moment it closes
Sealed edge to edge
Multi-layer aluminum panels
Folds to the cab, drive open Folds to the cab, drive open
One-person install
The original hard-fold cover

Features

  • Locks the moment it closes: BAK's patented auto-latch engages as each panel closes, so there is no separate locking step. BAK says the Gen 3 lock parts were re-engineered to resist forced entry better than the Gen 2. To open it, drop the tailgate and pull the release cable.
  • Sealed edge to edge: Revised EPDM rubber perimeter seals and tight-fit clamps close the gap between the cover and the bed rails, and on most trucks a dual-action tailgate seal, 13% longer than before, covers the tailgate. Drain tubes carry off water that reaches the rails. BAK's own sheet notes the cover is not airtight, so think weather-resistant, not sealed.
  • Multi-layer aluminum panels: Aluminum top panels sit over high-density polymer cores on aluminum side rails. BAK says the Gen 3 panels are 22% stronger than the original MX4, and the closed cover is rated at 400 lb, evenly distributed.
  • Folds to the cab, drive open: Fold the panels to the cab, strap the cover to the buckles at the bulkhead and drive with the bed open for tall loads. Flipped fully upright, prop rods hold it against the cab on rubber bumpers. BAK says it is the only hard fold that leaves your 3rd brake light visible in every position.
  • One-person install: Click-in clamps hold the rails to your bed rails, with no drilling on most trucks, and one person can do the job. BAK rates it at 30 minutes or less (Level 1) and says the new click-in design cuts install time by 12%.
  • The original hard-fold cover: BAK says the MX4 defined the hard-folding category and calls it America's best-selling truck bed cover. The Gen 3 version (model year 2025) sits flush with the bed rails and wears a textured matte black finish on every surface.

Description & Fitment

BAKFlip MX4 448406 fits the 2005-2015 Toyota Tacoma with the 5'1" bed. For reference, the box is about 60.3" long. Re-engineered prop rod clips hold it upright against the cab, and rubber bumpers protect the cab paint. Its Gen 3 aluminum panels sit over a high-density polymer core, and BAK rates them 22% stronger than the original MX4. Revised EPDM perimeter seals and tight-fit clamps help keep weather out, and drain tubes carry off water that reaches the rails. Fitting it is straightforward: its rails bolt to the factory utility rails with T-nuts, and the drain tubes run through a hole drilled in each wheel well, and BAK calls it a Level 1 job of 30 minutes or less. It carries BAK's 5-year limited warranty.

Fitment & Compatibility

Toyota
Years Model Bed Notes
2005-2015 Tacoma 5'1" (60.3") —

Check your bed: measure along the bed rail from the bulkhead to the inside of the closed tailgate. This part is for the 5'1" bed on the 2005-2015 Toyota Tacoma. BAK's own brands list this box at 60.3" long.

Not for: the 6'2" bed (BAKFlip MX4 448407). 2016-2023 trucks with the same bed take BAKFlip MX4 448426.

About BAK Industries

BAK.

BAK makes hard tonneau covers. BAK bills itself as "America's #1 truck bed cover."

The range splits into BAKFlip hard folding covers (MX4, MX4 EZ-Lift, MX4 TS, G2, F1 and Fibermax) and Revolver hard roll-ups (X2, X4s and X4 TS). The MX4 is the aluminum-panel BAKFlip that BAK calls America's best-selling truck bed cover; the MX4 TS adds T-slot rails and the MX4 EZ-Lift adds a lift-assist system.

Authorized BAK dealer. Prestige Truck is an authorized BAK dealer, so what we sell is new and genuine BAK. BAK's warranty "is nontransferable and applies to the original purchaser of the BAK product only," and BAK requires warranty registration on file or proof of original purchase (a detailed, dated receipt) for warranty service. Your Prestige Truck order receipt is that proof.

Frequently Asked Questions

Will this fit my 2005-2015 Tacoma?

Yes, if it has the 5'1" bed. Measured along the floor, that box is about 60.3". Measure along the bed rail from the bulkhead to the closed tailgate, and note it is not for the 6'2" bed (BAKFlip MX4 448407). If you are unsure, send us your VIN and we will confirm.

My truck is right at a model-year change. Which one do I need?

This part covers the 2005-2015 Toyota Tacoma. 2016-2023 trucks with the same bed take BAKFlip MX4 448426. Go by your truck's model year, or send us your VIN.

What changed with the Gen 3 MX4?

BAK lists stronger panels (high-density polymer cores, 22% stronger than the original MX4), re-engineered lock parts that resist forced entry better than the Gen 2, revised EPDM perimeter seals and tight-fit clamps, a dual-action tailgate seal 13% longer than before, re-engineered prop rod clips, and a click-in design that it says cuts install time by 12%.

Will it keep rain and snow out of the bed?

It is built to: edge-to-edge seals and tight-fit clamps close the gap to the bed rails, and drain tubes carry off water that reaches the rails. BAK's own install sheet says the cover is not airtight, so plan on weather-resistant rather than sealed. Clear snow and ice off before you open it; that is a warranty condition too.

How much weight can it hold?

BAK rates the closed cover at 400 lb, evenly distributed. BAK's sheet also says not to drive with objects on top of the cover or tie cargo to it.

Can I drive with it folded open?

Yes. Fold it toward the cab and attach the straps to the buckles at the bulkhead, pulled snug, and you can drive with the bed open. The cover must be secured at all points while the truck is moving; that is a condition of the warranty.

Installation

Install time 30 minutes or less (BAK's figure)
DifficultyLevel 1simple installation; one person
TypeBolts to the factory utility rails with T-nutsdrain tubes need a drilled hole
Tools
  • a 1/2" wrench or socket and a Phillips screwdriver
  • plus scissors or a utility knife, isopropyl alcohol, 5/8" drill bit and drill, T-30 Torx driver, 3/8"-drive short extension and ratchet

Here's the short version. Follow BAK's install sheet (below) for your truck's exact clamp positions and settings.

  1. Seal the bulkhead. Remove the bulkhead utility-rail end caps on both sides, then clean the top of the bulkhead with soap and water and stick the seal from one edge to the other.
  2. Load the utility rails and route the drains. Remove the factory end cap from each utility rail (and any cleats), slide in three T-nuts and refit the end cap. Fit the drain tubes to the front of the side rails and run each one through a 5/8" hole drilled in the top corner of the wheel well, after checking underneath that nothing is in the way.
  3. Bolt on the rails. Set each side rail with the drain fitting toward the cab, pushed against the bulkhead, and bolt it to the T-nuts through the clamps with a 5/16" flat washer and hex bolt at each spot: one clamp 12" from the bulkhead, one in the middle and one as close to the tailgate as possible. Tighten to 10 ft-lb with a 1/2" wrench or socket.
  4. Prep the cover. Slide the two cover retainer clamps into the track under the cab end of the cover, one per side. Peel the liner off each gasket, stick it under a buckle end, and screw the two buckle ends into the pre-drilled holes on the front header panel with the screws and nutserts. Hand-tighten only; don't use a screw gun.
  5. Set the cover in place. Lay the folded cover on the side rails at the cab end, centered between them, and turn the retainer clamps clockwise until the lock washer is snug. With the cover still folded, clean the spots for the cab bumpers with soap and water, then isopropyl alcohol, let them dry and stick the bumpers along the top edge where the cover meets the cab.
  6. Unfold, adjust and check. Unfold the cover toward the tailgate and center every panel side to side and front to back; the rear edge and tailgate seal rest on top of the tailgate with a 1/2" overlap. With a power tailgate, make sure it still works with the cover closed. Release each latch to check it engages the rails (the sheet shows how to adjust a slam latch), then re-tighten the retainer clamps. BAK's warranty asks you to re-check every clamp after your first week of driving.

Stuck on a step? Ask our install experts

What's included
  • Hard fold cover
  • Driver side rail
  • Passenger side rail
  • Bulkhead seal
  • 2 cover retainer clamps
  • 2 buckle ends
  • 2 gaskets
  • 4 screws
  • 4 nutserts
  • 6 T-nut kits (5/16" flat washer, and hex head bolt)
  • 3 D-shaped cab bumpers
  • 2 drain tubes

Specifications

BrandBAK
Part Number448406
Cover TypeHard folding
GenerationGen 3 (model year 2025)
Top PanelsAluminum over a high-density polymer core
Side RailsAluminum
FinishTextured matte black
Load Capacity400 lb, evenly distributed
LockingPatented automatic latching
SealsEPDM perimeter seals; dual-action tailgate seal on most trucks
DrainageIntegrated drain system with drain tubes
Bed Access100% when folded against the cab
3rd Brake LightVisible in every position
MountingClamp-on, no drilling on most trucks
Warranty5-year limited
Fits2005-2015 Toyota Tacoma
Bed Length5'1" (60.3")
UPC819275042413

Warranty, shipping & returns

  • 5-year limited warranty

    BAK covers the BAKFlip MX4 against defects in materials or workmanship for five (5) years from the original date of purchase.
    • A defective cover or hardware component is repaired or replaced, at BAK's option; BAK may substitute a newer model with similar form and function.
    • It covers the original purchaser only and is not transferable. Warranty registration must be on file, or keep a detailed, dated receipt as proof of purchase; contact us for help with registration or a claim.
    • To keep it valid: clean with mild automotive soap and water only; keep the cover secured at all points while driving; check all clamps and retention parts for tightness after a week of driving after installation (or reinstallation) and now and then after that; clear snow, ice and anything else off before opening; never tow the truck from the rear with the cover on (remove and store it first).
    • Claims: get a Return Material Authorization (RMA) number from BAK before returning anything. BAK may ask for the part back postage prepaid, and shipping charges apply to a repair or replacement. A claim needs your order number, contact details, vehicle, part number, a description, the receipt and photos.
    • Not covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that is not a defect in material or workmanship. BAK does not accept returns of non-defective products once installed.

  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Order by 5 PM ET on a business day and it starts processing the same day.
    • This cover is an oversized item, so it ships by freight or as an oversized parcel.
    • Most orders arrive within 1-5 business days.
    • We email your tracking number as soon as it ships.

  • Inspect on delivery

    This cover ships in a long, heavy box. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.

  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.

What our customers say

4.6 · 5025 reviews

Photos from owners

+169
James R. Verified
03/27/2025

Love my BAKFlip

I really like the fit and quality of my BAKFLIP MX4 for my Toyota Tacoma. The installation instructions were very easy and it looks great. I would suggest a couple of things. 1) Review the You Tube videos a couple of times before you start and 2) do use a torque wrench. I accidentally overtightened a bolt and snapped it off. Completely my fault.

Darin B. Verified
10/03/2026

Nice Tonneau Cover

A friend of mine has a BakFlip on his truck and after seeing it I got one for my new Tacoma. I really like the way it works. Customer service was great as well.

Jaye C. Verified
08/11/2026

Tonneau Cover

I had to send it back, because it would not fit on my truck. Because I have a roll bar on it. I have a Tacoma Trailhunter. Do you make a Tonneau Cover that will fit on a Toyota tacoma trailhunter with a roll bar?

Adam H. Verified
06/03/2026

Nice cover. Easy installation.

Pretty straightforward installation. Well made product. Exactly what I wanted.

Anonymous
11/19/2025

Best tonneau cover ever!

You get what you pay. Is what I was told all my life so when looking for a cover for my 2021 Tacoma I looked for the best. BAKFlip was the one for me. It is built in the USA, had a great warranty and is made from the best materials. Easy to follow instructions and looks great on the truck. It's very functional and easy to operate. Best of the best, hands down!

Paul R. Verified
05/07/2026

Repeat Customer

I had the previous generation of the BAKFlip MX4 on my 2017 Toyota Tacoma. Now using the latest version on my 2026 Tacoma. Best Tonneau covers I have ever owned. Wouldn't think of using anything else.

Jim P. Verified
04/20/2026

Good looking, functional, and well made.

Seems like it’s a well made hard folding bed cover. The installation was easy, and it looks good now that it’s on. My only complaint is that the holes drilled in it for the hardware to be mounted. They weren’t deburred and had sharp edges with aluminum chips still in them. Other than that it’s great. Package well, shopped fast , and free. I would recommend it.

David Verified
03/21/2026

Very Pleased with my MX4

Good quality product. My first tonneau cover. Install was not hard. Took a little measuring and fitting but once everything was flush and plumb I tightened everything down and it was great. Leaks just a little but not bad. Looks great! Functions great!!

Brian B. Verified
08/11/2026

Latch broke in less than a month

Latch broke in less than a month How do I get support? I have pictures of the latch which pulled out of the cover

Ronald L. Verified
12/02/2025

Tonneau cover

Easy installation. Looks good.

RICARDO
08/16/2025

Good quality

Easy install good quality good fitment...

Judy Verified
10/10/2025

BakFlip MX4 is game changing

We had a roll up shade before and it started having issues at about 1 year old. Decided to go with this simpler design and it is really great. It was super easy to install. Totally from box to installed in less than 45 minutes. I was familiar with the clamping method and it went without hiccup. We mostly carry groceries and an occasional bike back there and the backflip takes about 2 minutes to set up for carrying the bike. It looks great and is made so well I don't see any weak spots to fail. It's a great product and very well made. Keeping America Great, by buying USA Made.

Matthew T. Verified
09/17/2025

BaKFlip MX4

High quality material, easy installation, perfect fit with headache rack.

Salvador Verified
07/10/2025

it looks great I would

it looks great I would not use anything drifrent

Bruce S. Verified
05/06/2025

Nice cover

This is my 3rd BAKFlip for a 2007 Tacoma. The first lasted about 3 years before it was destroyed in an accident, the 2nd lasted about 6 years of daily abuse, with snowy Winters and lots of freeze-thaw cycles. The latest is greatly improved and fixed most of the small issues on the previous ones. Dry, semi secure storage that keeps thing dry and out of sight. I would highly recommend it.

Brian B.
06/23/2025

BakFlip MX4

Great cover. Got a new truck so this is my second one. I think they could do a little better job fighting leaks but I still love it and the way it works.

John K. Verified
02/23/2025

So far so good

I have only had the cover installed for three days. (It sat on my living room floor in the box for several weeks while I waited for my truck to arrive. ) So far so good. Everything installed as expected, and the Bakflip did indeed turn out to be a solid, quality product. Installation was straightforward, and it can be very quick if all you want to do is go fast. For a truly good fit, though, I would recommend taking your time. Getting things just right side to side is important for making sure that the latches on both sides catch evenly. Getting things just right front to back is important for making sure that the tailgate seal and the bulkhead seal both engage. If you take your time and do these things, and you’ll end up with a very solid, good looking cover that works exactly as they say it will. I haven’t been rained on yet, but it certainly looks like the seals and grooves are…

Yarin R. Verified
09/05/2026

Cover , no strong.

Fit perfect, the issue I have is when you are folding and keep open the cover, the air kick back the cover, it is not strong enough to hold, should be better quality for the price I pay, looks good but I was disappointed that did not function as needs to be.

Kyle G. Verified
01/05/2025

Exceeding expectations

Wanted a quality product with a low profile. Have had this for about 6 months. Zero complaints. It is certainly of a high quality. Looks sharp. Installation was as easy as advertised. Daily use is easy and reliable. A small amount of water intrusion is to be expected. I am not disappointed with the weather seal. Highly recommend.

Charles W. Verified
10/26/2024

BakFlip with ease! 2024 Tacoma Double cab 5’ bed

After reading many reviews and having a demonstration of this excellent BakFlip MX4 I pulled the trigger on one and couldn’t be happier. Super easy to install, could be a little easier with an extra set of hands but doable alone. It does what it stayed and flips back easily to allow full use of your bed opening when needed but also creates a secure “trunk” as well for travel.

Brad G. Verified
08/20/2024

MX 4 Hard Cover

Really pleased with my purchase. Cover looks great on my Tacoma. Not really difficult to install. Instructions could have had better photo examples for certain install steps.

Joey D.
08/15/2026

Perfect Tacoma Bed Cover

The best feature for the Tacoma is not losing the factory bed rail system. BAK created a mounting bracket for their cover that allows the remount of the factory bed rail system. Combine that with prop rods to hold the cover open and allow use of the entire truck bed and it's perfect. My install doesn't leak, only some minor seepage that doesn't effect the cargo that I carry. And it looks great too!

Kirk J. Verified
07/21/2024

Bakflp

Best on the market for full bed utility when needed. I appreciate the security with no visible locks when closed. I have one on a Tundra and now a Tacoma. Had to slightly modify some latches a bit to make it close efficiently during install. That’s it.

Ron S. Verified
05/24/2024

I love it. My third

I love it. My third bakflip and I will do it again for my next truck!

Alan F. Verified
03/23/2024

Tremor

It’s everything I expected

kevin Verified
08/10/2026

Very easy to install. I

Very easy to install. I didn't give five stars because the center panel has a couple of dimples on top. I'm assuming from the shipping process. They weren't bad enough to send back. Its fits very nice and flush on my 2022 Tacoma.

Anthony
04/24/2025

Beautiful fit and finish

I absolutely love the easy install and quality finish of my cover. Many people comment on how everything is flush to the top of the bed rails of my Tacoma.

John M. Verified
06/15/2026

Good Product, No directions

A great product. Better than my last Bakflip on my 2019 Tacoma Sport longbed. Happy it didn’t require moving the rails. Easy to install… once I found some videos online. The QR code it came with referenced directions for Fords and Chevys and other trucks, but not a Tacoma. Not a big deal since plenty of videos existed on YouTube. The product itself is outstanding. I wish the drain hose was rubber and not plastic. My last BakFlip they sheared off when I threw firewood in the back. Rubber wouldn’t have done that. But these seem less rigid, so here’s hoping. If they do shear off I’ll just replace with rubber.

Louie Verified
09/08/2025

looks good on Tacoma and functions as described

install and instructions could use improvement. . . .

Cameron J. Verified
07/16/2026

Leaks too much for price

The cover looks beautiful. Install was easy. But near the front of the bed on the right side water has a consistent drip during a med-high rain. If I was to know this leaked this much I would have bought a cheaper alternative. This review does not allow for media but I would post if I could.

Randall S. Verified
09/15/2024

Arrived timely, installation was straightforward.

Arrived timely, installation was straightforward. No issues. However, there seems to be a 2-3 inch spot on aluminum cover where paint didn’t cover well.

Paul M. Verified
07/23/2024

Missed the Mark

I've owned a number of BAKFlip MX4s on other vehicles and they were all great. The adapter rail for the 2024 Tacoma does not keep the latch rail secure and that keeps the cover from closing properly.

Travis
11/02/2024

Bakflip mx4 2017 Toyota Tacoma

Nice cover but after install seems to leak more than I would have expected. Started checking around and found lots of Tacoma owner having same issue. Also aluminum bed rail parts that are cut to length the ends show shiny aluminum while parts are black sticks out like a shore thumb. Would expect more attention to deal from bakflip for the price. Overall Ok comparing price to quality.

Jeremy W. Verified
09/09/2026

Great, but a dent on shipping

Everything was great, but the box was beat up a little. Upon opening the box, there was a small dent on the inner portion of the cover. Not big enough to return, just big enough to notice.

Jill H. Verified
10/08/2026

Perfect

Excellent product. Easy install. My boyfriend loves it.

CONNER Verified
08/07/2026

BakFlip MX4

I’ve been wanting the BakFlip MX4 for my 17 F150 for a while and I finally broke down and bought one. It’s everything I thought it’d be. It’s has great quality, durable and can easily be installed within a couple hours by yourself, but an extra set of hands doesn’t hurt.

Jeffrey P. Verified
06/20/2026

Better then expected.

Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.

Adam
07/20/2026

Great Purchase!

Bought the MX4 Cover for my '22 Tacoma and it has been a great purchase so far! Fit well and only took about an hour to get on by myself. Has a little bit of wiggle room but is very much satisfactory. I have had so many compliments about the cover so far and how it fits the truck so well. I would absolutly buy this again for future trucks and recommend the MX4 to anyone!

Gregory D. Verified
10/08/2026

Great look

It installed easily, look great, and functions good.

Richard A. Verified
06/04/2026

2026 Maverick cover

This is my third truck to install bak flip tri fold hard cover. Each one was improved and better than the last. My only issue was a wrong part was packed with mine so I had to call customer service to ship out the correct part. I think I have had this issue on the last two covers. Issue was always resolved in a professional and professional way but it is just an added cost to you and an extra step for the customer. You dont expect this from this price point.

Paul H. Verified
05/18/2026

Sturdy, Looks great

Replaced a soft cover with this. So far its been great. Gear is secure. Easy install.

Dennis R. Verified
08/23/2026

I wish I bought the MX2 instead.

I had an MX 2 installed on my 2017 Tacoma in January 2017. When I recently bought a 2023 Tacoma I wanted the BakFlip for it. The MX 2 is so much easier to install and it aligns with no issues. I had to keep adjusting the rails to improve the fit. The right side of the cover did not close all the way; there was a 1/4 inch gap. Part of the problem was the rubber seal improperly installed at the factory. I managed to peel it back and adjust it as it should have been.

Bob K. Verified
05/16/2026

What a waste of time

First box came without hardware. Second box came with everything but was not straight with one side being longer than the other. They kept asking me for pictures and measurements till I had enough and sent it back for a full refund. Will never buy anything from them again. The funny thing is ,this is the second time they asked me to do a review on their junk.

Rick
07/07/2026

Extremely well engineered and great

Extremely well engineered and great quality!

William L. Verified
05/14/2026

Better Than OEM with easy install

The Ford Maverick factory options are fine but the BAKFlip is heavier duty. The installation was easy and took an hour but I have installed one on my F350 previously. It may take a little longer for someone with no experience installing a bed cover. Instruction are easy to follow. The BAKFlip is popular so there are excellent videos of step by step instruction online. An advantage of the BAKFlip is it is more secure than a regular cover. It’s going to be hard for someone to break into my bed and steal anything.

Michael F. Verified
05/09/2026

2026 F350 6. 5

Love the new design. Light weight and excellent quality and design. Easy to install with minimal tool required and the looks are amazing. Super sleek.

Duane Verified
05/07/2026

Tonneau cover looks great and

Tonneau cover looks great and was very easy to install. It’s very easy to fold open and gives full access to the whole bed.

Sidney C. Verified
10/08/2026

BAKFlip Excellence

I have purchased the BAKFlip MX-4 for 2 prior pickups and have been very pleased with the appearance, fit, materials, and workmanship. Thank you.

Lloyd
06/20/2026

Istallation

The ease of installation with two people was great!! Take out the of box and installed on truck took approximately 55m.

Michael R. Verified
05/06/2026

Awesome Cover

This BAKFlip is the best cover Ive had on any of my trucks by far. Easily installed and gives the truck a nice clean look. Dont hesitate buy one today!

Kenneth Verified
04/28/2026

BAKFlip MX4 Tonneau Cover

I’m very pleased with the fit, finish and ease of installation. A couple of pieces were damaged in shipping and customer service replaced them quickly. The only improvement that I can suggest is a heavier duty box to ship it in.

James R. Verified
10/08/2026

Topper

Got the cover quickly. Install was pretty easy but I did read and watch videos before install. My 11 year old grandson, he did most of the work inside the truck bed, and my son assisted. So you know it was a straight forward install. Love the topper.

Joel J. Verified
04/26/2026

BAKFlip Max4

Very easy install. Fits great and looks good also.

Albert P. Verified
05/16/2026

Expected a bit more for the price

First, watched the online video instructions for my year mode and make prior to starting. Small item, but 1/8" shims shown in the video were not included with my purchase. Second, both rubber bumpers that support the cover when in the folded position became unattached after 6 weeks without ever having the cover in the folded position. Third, both struts that are used to lock the cover in the folded open position are constantly vibrated from their holders and then hang down getting entangled in what ever cargo is being carried. Just a matter of time before they are broken off.

DawgFan62
06/09/2026

Pretty easy to install.

It was packaged very well. Looked great when install was finished, seems very sturdy. Opens and closes perfectly. Not sure about drilling the 2 holes for drain tubes included with it. Still thinking about that, will update later if I do drill them.

charles f. Verified
04/24/2026

It leaks

Was initially impressed with the bed cover. Appearance is great, installation was easy. But after a rain, water pools in the middle of the cover and begins to leak in the middle of the bed. Ive had numerous bed covers (roll up/soft trifold/hard trifold) and they all leak and I understand that it is unavoidable. However, other bed covers have leaked towards the cab or at the tailgate. This one leaks right in the middle of the bed. For the price I cannot and would not recommend this cover to friends/family.

Steve K. Verified
10/08/2026

Great tonneau cover

Great tonneau cover for the money.

Douglas B. Verified
04/20/2026

Best Value Tonneau Cover

Easy installation and very versatile tri-folding Tonneau Cover. Removes easily. Aesthetically appealing. Highly recommend.

Larry C. Verified
04/17/2026

Great Fit and Look

Excellent customer service and easy on line ordering. Packaged well and received with no damage. Easy install. Very pleased with look.

Mishell T.
06/06/2026

Perfect fit for my 2009

Perfect fit for my 2009 6ft bed Tacoma!

Richard M. Verified
10/08/2026

bed cover

the cover added nice look to my chevy truck

Reginald S. Verified
04/14/2026

The Best Truck Bed Cover Yet!

In 2015, I bought my first BakFlip and transferred it to my second Ram 1500. Here in 2026, I bought my third Ram and decided to get the new BakFlip design and am glad I did. Very easy to install and it took me less than 30 minutes. I love the finished look - like it's from the Ram factory. I like that the folded panels are really secured in place when driving and won't get whipped in the wind plus it leaves room for maximum cargo space. The upgraded cable system for latching and unlatching is another big plus. They really designed a great product and I recommend it over all the others out there. . . well worth the money!

Dennis M. Verified
03/30/2026

BAKFlip tonneau

Love it, easy install, great cover!

Lee A. Verified
03/05/2026

Solid

Everything I expected it to be. Same as GMs only less $. I rated medium on value because Im cheap :-). Seriously though, it was easy to install. I did it solo in about 45 min. Followed YouTube instructions from a guy that took the time to video his install. Got to love YouTube. Looks sharp. Has performed as expected. Zero issues. If you have a Sierra EV, get this cover.

Anonymous
05/09/2026

Love this thing!

Love this thing!

Kristen W. Verified
08/21/2026

Poor quality

The first backflip we received had a divet in the panel. They sent us a new panel that had the corner cover damaged and the screw pulled out. It was for a Long bed truck and it didn’t come with full length solid rails we had to add the extra 2’ which wasn’t easy and was annoying. Since we have been using it for over a month, 4-5 of the protective foam pieces have come loose and fallen off and we have tried to put some back on but they keep falling off. Overall this seems like a very low quality truck bed cover with components that can’t hold up to hardly any use or the outdoor elements. Very disappointed in this product.

Ricky B. Verified
02/19/2026

The BAKFLIP MX4 hard folding GEN3 is great

I just love how it sits on my truck it makes it look very distinguished

Michael F. Verified
01/18/2026

Very good

Nice product super easy to install but grab a friend its much easier. Product fits the bed nicely. And the lathes made it easy to fold up. If I had one critique I wish the cover on the Cab side was convex to match the shape of the bed on my 25 raptor. Small critique would make it perfect other than that it still gets an A+ from me.

Mohamed Z. Verified
01/02/2026

Great fit

Ive been wanting a hardtop cover for months but I waiting to sell my camper shell, finally I was able to find the correct match since my truck is eight feet bed. It wasnt an easy task to find the correct one! This one looks great on my truck

Alan L. Verified
10/07/2026

New install

Only took me an hour to install. Great looking.

Michael
04/29/2026

Great looking cover

Easy install and great fitting cover for my 2017 Tacoma. Would definitely recommend if you're looking for an upgrade to your truck! Keeping the bed dry when closed, even through the rainstorms of south Florida.

Cornelius J. Verified
12/12/2025

Bakflip

Overall so far the cover is great I have no complaints a couple people I know say they have problems with theirs before so I'll just have to wait and see but for me it's great no problem

Michael Verified
12/10/2025

Love the BAKFlip

Love the BAKFlip but disappointed missing bolts for the Snap to hold it while flipped up. But over all very pleased with the product.

Benjamin T. Verified
10/06/2026

F150 Lightning fits and looks great

Great price for a quality product. Easy to install. Shipping took way longer than expected. The final setup looks amazing.

kevin c. Verified
12/08/2025

Amazing Bed Cover

The BAKFlip MX4 was real easy to install and works great. Drove through a severe down pour and everything in my bed remained dry. I feel it may be helping with gas mileage as well. The individual sections allow me to access the everyday essentials in the rear of the bed without having to flip the entire cover open. Worked perfect for camping.

Anonymous
04/12/2026

Great cover

went on easy, looks nice ,not totaly waterproof but will work.

Martin G. Verified
12/03/2025

Awesome Hard cover!!

Love the look sleek and low profile, keeps 90% of the water out of the bed even though a high pressure car wash. Need to see the long term durability. Over all great coverpretty simple install even for the carbonpro bed.

Kevin W. Verified
05/02/2026

MX4 Gen 3

I like the cover especially because it's a hard top. There still is leakage and some parts, like the seal, seem to be fragile. Mines popped off. I have to move it a little to make it lock. If I have to use my whole truck bed, it covers my whole back window. I do like the steak flush look. I like that it easily opens with the pull down. I also like the fact you can close it with the truck bed door open or closed. Overall I like it, but for the price, definitely wish there were some things that were better.

David G. Verified
10/06/2026

Perfect fit. Really satisfied

Perfect fit. Really satisfied

Susan C. Verified
11/26/2025

Backflip for Sierria EV

Flawless fit. And was much better than I expected for the price.

Jeremy Verified
08/11/2026

Poor Q/A inspection

While the cover looks good the quality of parts were defective. I had to call for replacement and repair parts twice. The cable to release the lip broke due to poor workmanship. I had to replace the latch myself after only 2 weeks. This is way overpriced for having to fix it myself.

Jtmalone86
08/18/2026

Great utility, quality not as much

My wife had one of these on her 2010 nissan titan and it was perfect in every way. So when we bought a newer truck (2015 ram 2500) we wanted to get the same cover. Tonneau was shipped quickly, was packed well and had easy instructions. The fitment is perfect and the overall utility is great. I espec6like how it acts as a headache rack when fully up and out of the way. I've had this item for a year now and have had it opened and closed around 30-40 times. The wire for the section closest to the tailgate broke. Inside the latches the wire is looped and crimped on and it slid out of the crimps. So I had to buy new cable and fix it. Works like a charm now. I will say the other stock cables work well and have not broken. Other issue is the clips that hold the seal into the side of the tonneau keep popping out. They pop back in easily but it's definitely annoying and causes the seal to…

duke
09/12/2026

quiestionable longevity

I have this cover on a 2021 F250. I work in the construction industry and need to open it often. The corner pieces have fallen off and the coating doesn't hold up to medium use. The seal leak in various places. If this is something you rely on, I would consider other brands.

Logan S. Verified
11/14/2025

Looks Great but Leaks

I love the low profile look of the cover but it leaks in the corners by the cab. I even purchased some silicone putty to fill in the gaps between the bed and the cover, but it still leaks.

Alex S. Verified
08/06/2026

I am happy with the

I am happy with the product. It works well. My goal was to purchase a more heavy-duty cover, but currently it is not made for the 2026 GMC Sierra AT4 EV. If that ever changes please contact me as I most likely will be interested.

Gary C. Verified
11/13/2025

Needs Additional Latch set

Second fold from rear window needs a latch set. The joint raises and lowers after your speed reaches 70 mph and above. This can lead to water leaks at the joint. Contacted company, but would not fix problem or refund money. They said this is normal function of the cover. This problem is caused by the design of the aerodynamics of the truck with the Cab Air Deflectors. This is different from all other Chevy Trucks.

Marc C. Verified
06/07/2026

Tonneau cover is nice - but damaged inside of packing

The cover went on well but once I installed it, I noticed the clip that holds the strap for locking into place in the folded position, was broken off. I found the broken piece in the packing material. The only real fix would be to send the whole cover back and I needed it for my truck. I guess I should have looked it over more closely when I removed it from the packing.

Noel M. Verified
05/07/2026

It's good, but not 100%.

It's good, but not 100%. The corners on the front have an opening where water can get in, and it's a bit hard to open.

Kristyn Verified
03/18/2026

Easy install, nice looking

This tonneau cover was even nicer looking than I thought it would be. Super streamlined and matches my Rhino Lining bedliner somehow. The only complaint is that I installed it three weeks ago and the adhesive foam strips are peeling up already. The truck is garage stored and it’s summer so it hasn’t been in the elements yet.

Garrett N. Verified
03/14/2026

2026 gmc Sierra AT4X 6. 6L diesel

I installed in myself. Took me 5 hours the only struggle I had was reconnecting fuel lines. Only thing was I wish it had the brackets from the fuel pump to where the connectors end.

Daron N. Verified
07/23/2026

Disappointing Quality for the Price

For the price I paid, I wouldnt buy this cover again. The biggest issue is with the long-bed rails. They come in two pieces, but only include three mounting clips. Because of this, its very difficult to get the rails properly aligned during installation, and they never seem to line up quite right. The adhesive rubber bumpers have already started coming loose after being exposed to warm weather. Lastly, the cover gets extremely hot in direct sunlight. It becomes uncomfortable to touch and makes it painful to open when needed. Overall, Im disappointed. For what this cover costs, I expected better quality and a better-designed product. Now that its installed, I feel stuck with something Im not satisfied with.

Dave B. Verified
10/09/2025

Ok

With the longer bed this cover doesn’t allow you to transport with just one fold. Any suggestions. Also, any suggestions on making it less water resistant?

Nate Verified
07/23/2026

Leaky

This is the least weather proof cover Ive ever owned, on top of that it rattles on any pot hole or bump. The only thing this cover has going for it is the appearance.

Joseph G. Verified
07/07/2025

Clamps weren't right

The clamps don't seat well against the metal behind the cap rail plastic. So, they can't hold straight when closing the cover. I contacted support and they said to send a picture and over a week later I've gotten nothing back after additional email. Pretty disappointed that something so simple couldn't be resolved quickly. I have put backing material in place until they figure it out so I can at least use it. The tailgate seal was also not seated correctly so I had to take it off and reseat it. For such an expensive product they really aren't doing the small parts well.

Danny S. Verified
09/20/2026

Too short

Love everything about the cover except that it’s too short. It barely covers the edge of the bed at the front and just touches the tailgate. Seems about two to three inches shorter than it should be so it doesn’t keep the water out at the tailgate and it’s not very secure for theft.

Andy Verified
09/09/2026

Used bed cover

The foam was glued together and bed cover looks worn and half of the parts are missing . Took it to a place for an install and they told me this is definitely a used item. Wasted a whole day!

Jerry D. Verified
07/25/2026

Not engineered well for ridgeline

very difficult to get to fit. RETURNED. Thank you for no hassle.

Danny B. Verified
07/21/2026

1 star

Product is flimsy. You can see light escaping through the cracks from the outside. Plenty of water gets inside. Side trims are always falling off rail. Always looks dirty or faded. Side stands don’t hold up box correctly.

Dale T. Verified
06/23/2026

Hard folding

I am very unhappy with the fit. It does not allow the tail gate of my 2026 Nissan frontier to properly close. I have to position it further forward on the bed to make it work. I would not recommend this cover or the company.

Jeff S. Verified
06/16/2026

Be aware of damage and no customer support

Damaged bed cover and no help from customer servic

James I. Verified
05/16/2026

Will not fit 2025 Nissan Frontier Pro X

I like the appearance and a parent quality of the product, but it would not work on a 25 Nissan frontier the rear latches would not come down enough to latch so I had to return it. customer Service was very helpful and I had no issues so far still waiting on my refund.

Marie C. Verified
05/12/2026

Nope

It looks unfinished. The rubber molding on the sides creased up were it folds. I gave it some time n the heat to see if it would flatten and it didn’t. The corners by the cab looked unfinished. The installation of the rails was horrible, yes I did it right, and it still didn’t close and lock wo slamming it or lifting on the side rails get it to lock. For the amount of money it cost I expect much better. So I returned mine and went with another brand from another company. And am very happy now. No rubber flap edges. Easy install and locks every time. Yes: the return process was fast and easy, but I’m rating the product.

Dan C. Verified
05/11/2026

Bakflip MX4 Ram truck w/rambox

I’m very disappointed with this product. It leaks at both the front and rear, which defeats the whole purpose of having a bed cover/top in the first place. The instructions were also a major issue. I have a Ram with the RamBox bed, but the instructions provided were for a Chevy 1500. The installation is not the same, and it made the process much more frustrating than it needed to be. Had I known the product would not seal properly and that the correct truck-specific instructions would not be included, I would have chosen a different top. At this point, I honestly wish I could return it.

Ernest S. Verified
05/07/2026

Substandard Cover

After making several adjustments to maintain the cover from dismantling, I reached out to customer service but have yet to receive a call.

Jeffrey S. Verified
07/21/2026

Leaks everywhere

If you want a cover that does not leak look somewhere else. It has been installed correctly and it's still does not prevent water from entering the bed. . after a good rain the bed as water in it do not keep anything that is valuable in your bed.

Chad M.
08/29/2026

Backflip MX4 Bed cover honest feedback

First of all, I don’t like to bring bad news, that being said, here it goes. Last year 2022 in may, I received my first MX4, it looked great! I had little trouble with installing it, about 30 mins I’d say. My issue is with the overall durability or thickness the bad cover aluminum, it dents so easily. One hailstorm and it looked like a golf ball. Ugh, that was just having it for a few months. The company was receptive to my concern, and sent me a “fiberglass” one to hopefully correct the issue. The next light hailstorm and it was another golf ball. I’m not sure if they sent me another aluminum one by mistake, or their fiberglass dents vs. cracks? It’s just a lot of money to ruin the look of your otherwise tough looking truck. Sorry Bakflip, you even tried to make it right by sending me another one, and still failed. Makes me feel a little sick.

RichieT
07/07/2026

Good but not perfect

Looks good, I like that it folds all the way for full bed access. One of the bumpers for when it is fully open blew off. Still leaks water inside. Could probably use to be made a little longer for more coverage over the tail gate. I was expecting better for the money I paid for this thing. I have a cheaper one on a different truck that leaks about the same. I going to try some extra gasket in places and hope for the best.

Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question