ARLENE M.
Verified
09/23/2024
FOR A FRIEND
I Bought it for my better half birthday, and he loves it.
BAKFlip MX4 Hard Folding Tonneau Cover for 2005-2021 Nissan Frontier / Suzuki Equator (5' Bed)
$1,199.99
Regular price
$1,503.99
Save $304.00
Verify fitment with your vehicle
GO
Clear
Free gifts included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
See it on a truck
Locks the moment it closes
Sealed edge to edge
Multi-layer aluminum panels
Folds to the cab, drive open
One-person install
The original hard-fold cover
Features
- Locks the moment it closes: BAK's patented auto-latch engages as each panel closes, so there is no separate locking step. BAK says the Gen 3 lock parts were re-engineered to resist forced entry better than the Gen 2. To open it, drop the tailgate and pull the release cable.
- Sealed edge to edge: Revised EPDM rubber perimeter seals and tight-fit clamps close the gap between the cover and the bed rails, and on most trucks a dual-action tailgate seal, 13% longer than before, covers the tailgate. Drain tubes carry off water that reaches the rails. BAK's own sheet notes the cover is not airtight, so think weather-resistant, not sealed.
- Multi-layer aluminum panels: Aluminum top panels sit over high-density polymer cores on aluminum side rails. BAK says the Gen 3 panels are 22% stronger than the original MX4, and the closed cover is rated at 400 lb, evenly distributed.
- Folds to the cab, drive open: Fold the panels to the cab, strap the cover to the buckles at the bulkhead and drive with the bed open for tall loads. Flipped fully upright, prop rods hold it against the cab on rubber bumpers. BAK says it is the only hard fold that leaves your 3rd brake light visible in every position.
- One-person install: Click-in clamps hold the rails to your bed rails, with no drilling on most trucks, and one person can do the job. BAK rates it at 30 minutes or less (Level 1) and says the new click-in design cuts install time by 12%.
- The original hard-fold cover: BAK says the MX4 defined the hard-folding category and calls it America's best-selling truck bed cover. The Gen 3 version (model year 2025) sits flush with the bed rails and wears a textured matte black finish on every surface.
Description & Fitment
BAKFlip MX4 448506 fits the 2005-2021 Nissan Frontier (and the 2009-2012 Suzuki Equator) with the 5' bed. The textured matte black cover sits flush with the bed rails and is rated at 400 lb spread evenly. BAK rates the install at 30 minutes or less, and on this truck it clamps to the bed rails with no drilling. BAK's own brands list the box at 58.6". Re-engineered prop rod clips hold it upright against the cab, and rubber bumpers protect the cab paint. Fold it against the cab and strap it down to drive with the bed open; BAK notes the 3rd brake light stays visible in every position. The warranty is BAK's 5-year limited coverage.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2005-2021 | Frontier | 5' (58.6") | — |
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2009-2012 | Equator | 5' (58.6") | — |
Check your bed: measure along the bed rail from the bulkhead to the inside of the closed tailgate. This part is for the 5' bed on the 2005-2021 Nissan Frontier (and the 2009-2012 Suzuki Equator). BAK's own brands list this box at 58.6" long.
Not for: the 6'1" bed (BAKFlip MX4 448507). 2022-2027 trucks with the same bed take BAKFlip MX4 448538.
About BAK Industries
BAK.
BAK makes hard tonneau covers. BAK bills itself as "America's #1 truck bed cover."
The range splits into BAKFlip hard folding covers (MX4, MX4 EZ-Lift, MX4 TS, G2, F1 and Fibermax) and Revolver hard roll-ups (X2, X4s and X4 TS). The MX4 is the aluminum-panel BAKFlip that BAK calls America's best-selling truck bed cover; the MX4 TS adds T-slot rails and the MX4 EZ-Lift adds a lift-assist system.
Authorized BAK dealer. Prestige Truck is an authorized BAK dealer, so what we sell is new and genuine BAK. BAK's warranty "is nontransferable and applies to the original purchaser of the BAK product only," and BAK requires warranty registration on file or proof of original purchase (a detailed, dated receipt) for warranty service. Your Prestige Truck order receipt is that proof.
Frequently Asked Questions
Will this fit my 2005-2021 Frontier?
Yes, if it has the 5' bed. Measured along the floor, that box is about 58.6". Measure along the bed rail from the bulkhead to the closed tailgate, and note it is not for the 6'1" bed (BAKFlip MX4 448507). If you are unsure, send us your VIN and we will confirm.
My truck is right at a model-year change. Which one do I need?
This part covers the 2005-2021 Nissan Frontier (and the 2009-2012 Suzuki Equator). 2022-2027 trucks with the same bed take BAKFlip MX4 448538. Go by your truck's model year, or send us your VIN.
What changed with the Gen 3 MX4?
BAK lists stronger panels (high-density polymer cores, 22% stronger than the original MX4), re-engineered lock parts that resist forced entry better than the Gen 2, revised EPDM perimeter seals and tight-fit clamps, a dual-action tailgate seal 13% longer than before, re-engineered prop rod clips, and a click-in design that it says cuts install time by 12%.
Will it keep rain and snow out of the bed?
It is built to: edge-to-edge seals and tight-fit clamps close the gap to the bed rails, and drain tubes carry off water that reaches the rails. BAK's own install sheet says the cover is not airtight, so plan on weather-resistant rather than sealed. Clear snow and ice off before you open it; that is a warranty condition too.
How much weight can it hold?
BAK rates the closed cover at 400 lb, evenly distributed. BAK's sheet also says not to drive with objects on top of the cover or tie cargo to it.
Can I drive with it folded open?
Yes. Fold it toward the cab and attach the straps to the buckles at the bulkhead, pulled snug, and you can drive with the bed open. The cover must be secured at all points while the truck is moving; that is a condition of the warranty.
Installation
Install time
30 minutes or less (BAK's figure)
DifficultyLevel 1simple installation; one person
TypeClamp-on, no drilling on most trucks
Tools
- a 1/2" wrench or socket and a Phillips screwdriver
- plus scissors or a utility knife, isopropyl alcohol and 5/8" drill bit and drill
Here's the short version. Follow BAK's install sheet (below) for your truck's exact clamp positions and settings.
- Seal the bulkhead. Clean the top of the bulkhead with soap and water, then isopropyl alcohol, and let it dry. Stick the included bulkhead seal from one edge of the bulkhead to the other and trim the excess. With a drop-in bed liner, the seal isn't needed.
- Position the clamps. Slide three clamp front halves into the tapered slot of each side rail: the rear one as close to the tailgate as possible (within 12"), one near the center and one as close to the front as possible (within 12").
- Clamp the rails and route the drains. Set each side rail with the drain fitting toward the cab, pushed against the bulkhead, slide each clamp up to capture both the bed rail and the cover rail, keep the rail level with the bed sheet metal, and tighten to 10 ft-lb with a 1/2" wrench or socket. Fit the drain tubes and route them out through the lower access holes in the bed liner, removing the plugs or drilling a 7/8" (22 mm) hole.
- Prep the cover. Slide the two cover retainer clamps into the track under the cab end of the cover, one per side. Peel the liner off each gasket, stick it under a buckle end, and screw the two buckle ends into the pre-drilled holes on the front header panel with the screws and nutserts. Hand-tighten only; don't use a screw gun.
- Set the cover in place. Lay the folded cover on the side rails at the cab end, centered between them, and turn the retainer clamps clockwise until the lock washer is snug. With the cover still folded, clean the spots for the cab bumpers with soap and water, then isopropyl alcohol, let them dry and stick the bumpers along the top edge where the cover meets the cab.
- Unfold, adjust and check. Unfold the cover toward the tailgate and center every panel side to side and front to back; the rear edge and tailgate seal rest on top of the tailgate with a 1/2" overlap. Release each latch to check it engages the rails (the sheet shows how to adjust a slam latch), then re-tighten the retainer clamps. BAK's warranty asks you to re-check every clamp after your first week of driving.
Stuck on a step?
What's included
- Hard fold cover
- Driver side rail
- Passenger side rail
- Bulkhead seal
- 2 cover retainer clamps
- 6 clamps
- 2 buckle ends
- 2 gaskets
- 4 screws
- 4 nutserts
- 3 D-shaped cab bumpers
- 2 drain tubes
Specifications
| Brand | BAK |
|---|---|
| Part Number | 448506 |
| Cover Type | Hard folding |
| Generation | Gen 3 (model year 2025) |
| Top Panels | Aluminum over a high-density polymer core |
| Side Rails | Aluminum |
| Finish | Textured matte black |
| Load Capacity | 400 lb, evenly distributed |
| Locking | Patented automatic latching |
| Seals | EPDM perimeter seals; dual-action tailgate seal on most trucks |
| Drainage | Integrated drain system with drain tubes |
| Bed Access | 100% when folded against the cab |
| 3rd Brake Light | Visible in every position |
| Mounting | Clamp-on, no drilling on most trucks |
| Warranty | 5-year limited |
| Fits | 2005-2021 Nissan Frontier (and the 2009-2012 Suzuki Equator) |
| Bed Length | 5' (58.6") |
| UPC | 819275042529 |
Warranty, shipping & returns
-
5-year limited warranty
BAK covers the BAKFlip MX4 against defects in materials or workmanship for five (5) years from the original date of purchase.- A defective cover or hardware component is repaired or replaced, at BAK's option; BAK may substitute a newer model with similar form and function.
- It covers the original purchaser only and is not transferable. Warranty registration must be on file, or keep a detailed, dated receipt as proof of purchase; contact us for help with registration or a claim.
- To keep it valid: clean with mild automotive soap and water only; keep the cover secured at all points while driving; check all clamps and retention parts for tightness after a week of driving after installation (or reinstallation) and now and then after that; clear snow, ice and anything else off before opening; never tow the truck from the rear with the cover on (remove and store it first).
- Claims: get a Return Material Authorization (RMA) number from BAK before returning anything. BAK may ask for the part back postage prepaid, and shipping charges apply to a repair or replacement. A claim needs your order number, contact details, vehicle, part number, a description, the receipt and photos.
- Not covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that is not a defect in material or workmanship. BAK does not accept returns of non-defective products once installed.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- This cover is an oversized item, so it ships by freight or as an oversized parcel.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
This cover ships in a long, heavy box. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.
What our customers say
4.6 · 5025 reviews
Photos from owners
+167
Michael V.
Verified
09/14/2026
Good price and super fast shipping!
So far this thing works and looks great! Super easy installation and keeps my gear secure and dry.
Russell R.
Verified
06/07/2026
Nice cover
having used the cover for only a short period of time, I find it durable and user friendly. Only negative was the length of the drain tubes. Could have been longer. I had to replace at the hardware store with longer tubes.
Lee N.
Verified
05/28/2026
Great Cover
I have bought two of these BackFlip covers for my trucks and I love the versatility. Easy to install and relatively secure, especially compared to soft covers. Allows you to fully expose the box for hauling while offering a secure solution for the contents when covered.
Gabriel D.
05/29/2025
Backflip MX4
Easy to install looks great and works great and a big plus fast and no problem delivery
James W.
Verified
04/23/2026
Nice low profile stylish
Nice looking good quality. Price could be better. But won't complain at all.
Zaki F.
Verified
11/07/2025
Great, durable and excellent quality
The cover is durable and well-built — you can really feel the quality. It fits perfectly, looks great. I highly recommend it to anyone looking for a strong and reliable bed cover.
Sam L.
Verified
10/05/2025
Not a good fit for 2025 Nissan Frontier SV
After installation, the cover will not snap closed with the tailgate up. But if I snap the final panel closed with the tailgate down first, the tailgate will not shut in place. Not enough clearance for the tailgate to open and close freely. Not sure I got the right rail brackets for my truck as there is a plastic trim all along the bed. Thick plastic along the tailgate as well. And I don't have a utility track system to mount the hardware.
Brian B.
Verified
08/11/2026
Latch broke in less than a month
Latch broke in less than a month How do I get support? I have pictures of the latch which pulled out of the cover
Robert E.
Verified
09/26/2025
Most improved
Only gripe is the backpack style straps need a better way to stay put. They keep coming unclipped.
Ted M.
07/30/2024
New tonneau cover
Very pleased! Came on time and installation was very easy. Took truck thru a car wash and some water comes in right behind the cab. I think this is doe to the weather stripping but in time, I think it will flatten out.
steve z.
Verified
05/20/2025
Excellent cover
Quick ship, quality cover. Challenging for a first time install to get perfect on a 2025 Frontier. Looks like it was made for the truck after the install. Very nice!
Scott C.
Verified
02/05/2025
Easily installed cover. After a
Easily installed cover. After a night of rain, I found that it appeared that I had a couple panels leaking water through to the bed. I think it may be that the weather stripping along the rails are fresh out of the box need time to relax, maybe even wit for some warm weather for this to occur, properly. Cover looks great and I am looking forward to its long use.
Thomas E.
Verified
12/29/2024
Fits and looks great!
Customer service is great! Had to return first cover. 2nd one looks good and fits perfectly.
Patrick K.
Verified
11/30/2024
Owner
Hi great cover like my last one was !!!! All watertight too perfect fit .
Anonymous
09/22/2025
So easy to install, a caveman can do it!
On my 2016 Frontier it looks and works great keeping the bed secure and locked! Keeps most of the rain from getting in with the drains! So much better than vinyl.
Justin S.
Verified
10/12/2024
Great Product- no regrets
Great durable product, definitely a 2 person install to ensure the rails are level. Super quick to install and looks amazing. 5 ⭐️ shipping, super fast and packaging was extremely durable to ensure no damage
Yarin R.
Verified
09/05/2026
Cover , no strong.
Fit perfect, the issue I have is when you are folding and keep open the cover, the air kick back the cover, it is not strong enough to hold, should be better quality for the price I pay, looks good but I was disappointed that did not function as needs to be.
JAMES K.
Verified
09/11/2024
Great product
Excellent, Looks amazing, easy install.
Steve C.
Verified
07/30/2024
Solid design
Well made - be sure to use the drill fixture as the metal on the side rails may be uneven with the plastic causing the screw to not pass straight through. Installation was easy and well designed.
Eleazar M.
Verified
05/20/2024
Not informed
I was not informed about design changes on bed cover before it was sent to me, maybe I wouldn’t have got it and chose a different one!!!!
Doug
08/27/2026
Great fit, looks great, works great
Just installed on a '23 Nissan Frontier. Very easy to install and feels extremely solid and when closed nice and tight. Easy to open from either side and looks great.
Vince R.
Verified
03/17/2024
Perfect Best of both Worlds
Water tight 100% protecting my tools etc..
dondi g.
Verified
02/07/2024
HUsband LOVES this!
I bought this for my husband for Christmas...Best idea EVER! He LOVES it!
Carlos P.
Verified
01/12/2024
Great cover for my 2024
Great cover for my 2024 Nissan Frontier!
DEVIN S.
Verified
07/29/2026
It's a great tunnel cover
It's an awesome tonneau cover, other than having to drill my bedside to install the rails. In the directions, it shows the clamps, but it doesn't come with the clamps.
Heather
08/16/2026
2023 Nissan Frontier Pro-4X
I put this on my 2023 Nissan Frontier Pro-4X with the rails that are on the inside of the bed, thinking it may not fit. Well, it fit and works great! It comes with 6 clips to mount the rail that supports the Tonneau Cover. Two are larger than the other 4. Use the larger ones for the first ones that you install when following directions near the bulkhead. The smaller ones work well in the middle and near the tailgate.
Steven C.
Verified
08/27/2025
Looks good, easy to install
Looks good, easy to install but would like for it to be more water tight which is reason for loss of 1 star in rating
Ernest U.
Verified
02/15/2025
Leaks badly in n rain
Easy to in stall but leaks in rain. Had storage marks.
Cameron J.
Verified
07/16/2026
Leaks too much for price
The cover looks beautiful. Install was easy. But near the front of the bed on the right side water has a consistent drip during a med-high rain. If I was to know this leaked this much I would have bought a cheaper alternative. This review does not allow for media but I would post if I could.
Terry R.
Verified
09/01/2024
Mostly What I expected
The cover is easy to install and looks pretty good. It IS NOT water tight. In fairness, it would be hard to make it water tight. The foam seal at the front has woefully inadequate adhesive and blew off the first time I took it on the freeway. I had to buy some window sealer foam strips and stack them to get enough thickness to have a chance off having the cover hold the foam down and not blow off. The releases for the panels have thin wires to pull to release both sides. For what the cover costs, this feels a bit flimsy and I am not sure how it will hold up over time. This was one of the most expensive covers on the market and I just expected a bit higher quality on the mechanisms.
Phillip R.
Verified
04/12/2024
Worth it, but not perfect!
It isn't particularly heavy, but it is cumbersome. I installed it by myself, but it would go faster with two people and for someone less capable it is definitely a two-person job. On the first install, make sure that the seals don't fold under and crimp. They did this the first time and I almost didn't catch it. Once the seals relaxed into the correct format I have not had any problems with them folding under. I find that folding the cover up/back is really easy, but if you are shorter in stature, then it can be a little challenging. I generally keep it on all the time, but it is really easy to remove, and put back. Especially if you keep the rails on. I recently did this to haul some dirt. Take my advice, if you are going to remove the top for any reason or length of time, cover the rail grooves with duct tape to keep out dust/debris from getting in the grooves. My kids stand on it…
Jim
06/30/2026
Thanks for a good product.
Thanks for a good product. Arrived with minor damage during shipping. Promptly received repair parts. Excellnt product.
Jeremy W.
Verified
09/09/2026
Great, but a dent on shipping
Everything was great, but the box was beat up a little. Upon opening the box, there was a small dent on the inner portion of the cover. Not big enough to return, just big enough to notice.
Jill H.
Verified
10/08/2026
Perfect
Excellent product. Easy install. My boyfriend loves it.
CONNER
Verified
08/07/2026
BakFlip MX4
I’ve been wanting the BakFlip MX4 for my 17 F150 for a while and I finally broke down and bought one. It’s everything I thought it’d be. It’s has great quality, durable and can easily be installed within a couple hours by yourself, but an extra set of hands doesn’t hurt.
Jeffrey P.
Verified
06/20/2026
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
Mark
06/25/2026
Perfect
Works perfect on a 2022 Nissan Frontier Pro-4x with Utilitrack.
Gregory D.
Verified
10/08/2026
Great look
It installed easily, look great, and functions good.
Richard A.
Verified
06/04/2026
2026 Maverick cover
This is my third truck to install bak flip tri fold hard cover. Each one was improved and better than the last. My only issue was a wrong part was packed with mine so I had to call customer service to ship out the correct part. I think I have had this issue on the last two covers. Issue was always resolved in a professional and professional way but it is just an added cost to you and an extra step for the customer. You dont expect this from this price point.
Paul H.
Verified
05/18/2026
Sturdy, Looks great
Replaced a soft cover with this. So far its been great. Gear is secure. Easy install.
Dennis R.
Verified
08/23/2026
I wish I bought the MX2 instead.
I had an MX 2 installed on my 2017 Tacoma in January 2017. When I recently bought a 2023 Tacoma I wanted the BakFlip for it. The MX 2 is so much easier to install and it aligns with no issues. I had to keep adjusting the rails to improve the fit. The right side of the cover did not close all the way; there was a 1/4 inch gap. Part of the problem was the rubber seal improperly installed at the factory. I managed to peel it back and adjust it as it should have been.
Bob K.
Verified
05/16/2026
What a waste of time
First box came without hardware. Second box came with everything but was not straight with one side being longer than the other. They kept asking me for pictures and measurements till I had enough and sent it back for a full refund. Will never buy anything from them again. The funny thing is ,this is the second time they asked me to do a review on their junk.
Justin M.
05/22/2026
Amazing
Love the quality and how it looks it’s like there’s no cover there even. I ever buy another truck I’ll definitely be buying the bakflip mx 4
William L.
Verified
05/14/2026
Better Than OEM with easy install
The Ford Maverick factory options are fine but the BAKFlip is heavier duty. The installation was easy and took an hour but I have installed one on my F350 previously. It may take a little longer for someone with no experience installing a bed cover. Instruction are easy to follow. The BAKFlip is popular so there are excellent videos of step by step instruction online. An advantage of the BAKFlip is it is more secure than a regular cover. It’s going to be hard for someone to break into my bed and steal anything.
Michael F.
Verified
05/09/2026
2026 F350 6. 5
Love the new design. Light weight and excellent quality and design. Easy to install with minimal tool required and the looks are amazing. Super sleek.
Duane
Verified
05/07/2026
Tonneau cover looks great and
Tonneau cover looks great and was very easy to install. It’s very easy to fold open and gives full access to the whole bed.
Sidney C.
Verified
10/08/2026
BAKFlip Excellence
I have purchased the BAKFlip MX-4 for 2 prior pickups and have been very pleased with the appearance, fit, materials, and workmanship. Thank you.
Anonymous
05/09/2026
Best on the market
Purchased the MX4 for my 2022 Nissan Frontier. Had one on my 2013 Frontier and loved it. I believe it is the only hard flip that gives full access. Others don't flip up the last section.
Michael R.
Verified
05/06/2026
Awesome Cover
This BAKFlip is the best cover Ive had on any of my trucks by far. Easily installed and gives the truck a nice clean look. Dont hesitate buy one today!
Kenneth
Verified
04/28/2026
BAKFlip MX4 Tonneau Cover
I’m very pleased with the fit, finish and ease of installation. A couple of pieces were damaged in shipping and customer service replaced them quickly. The only improvement that I can suggest is a heavier duty box to ship it in.
James R.
Verified
10/08/2026
Topper
Got the cover quickly. Install was pretty easy but I did read and watch videos before install. My 11 year old grandson, he did most of the work inside the truck bed, and my son assisted. So you know it was a straight forward install. Love the topper.
Joel J.
Verified
04/26/2026
BAKFlip Max4
Very easy install. Fits great and looks good also.
Albert P.
Verified
05/16/2026
Expected a bit more for the price
First, watched the online video instructions for my year mode and make prior to starting. Small item, but 1/8" shims shown in the video were not included with my purchase. Second, both rubber bumpers that support the cover when in the folded position became unattached after 6 weeks without ever having the cover in the folded position. Third, both struts that are used to lock the cover in the folded open position are constantly vibrated from their holders and then hang down getting entangled in what ever cargo is being carried. Just a matter of time before they are broken off.
Anonymous
04/19/2026
It's a great product easy
It's a great product easy to install everything it was advertised to be.
charles f.
Verified
04/24/2026
It leaks
Was initially impressed with the bed cover. Appearance is great, installation was easy. But after a rain, water pools in the middle of the cover and begins to leak in the middle of the bed. Ive had numerous bed covers (roll up/soft trifold/hard trifold) and they all leak and I understand that it is unavoidable. However, other bed covers have leaked towards the cab or at the tailgate. This one leaks right in the middle of the bed. For the price I cannot and would not recommend this cover to friends/family.
Steve K.
Verified
10/08/2026
Great tonneau cover
Great tonneau cover for the money.
Douglas B.
Verified
04/20/2026
Best Value Tonneau Cover
Easy installation and very versatile tri-folding Tonneau Cover. Removes easily. Aesthetically appealing. Highly recommend.
Larry C.
Verified
04/17/2026
Great Fit and Look
Excellent customer service and easy on line ordering. Packaged well and received with no damage. Easy install. Very pleased with look.
Anonymous
04/12/2026
Dirty Dangles Boys
Sick cover - super happy with it. It does what its intended for, covers the bed and looks great doing it. The trifold system with pulleys is slick
Richard M.
Verified
10/08/2026
bed cover
the cover added nice look to my chevy truck
Reginald S.
Verified
04/14/2026
The Best Truck Bed Cover Yet!
In 2015, I bought my first BakFlip and transferred it to my second Ram 1500. Here in 2026, I bought my third Ram and decided to get the new BakFlip design and am glad I did. Very easy to install and it took me less than 30 minutes. I love the finished look - like it's from the Ram factory. I like that the folded panels are really secured in place when driving and won't get whipped in the wind plus it leaves room for maximum cargo space. The upgraded cable system for latching and unlatching is another big plus. They really designed a great product and I recommend it over all the others out there. . . well worth the money!
Dennis M.
Verified
03/30/2026
BAKFlip tonneau
Love it, easy install, great cover!
Lee A.
Verified
03/05/2026
Solid
Everything I expected it to be. Same as GMs only less $. I rated medium on value because Im cheap :-). Seriously though, it was easy to install. I did it solo in about 45 min. Followed YouTube instructions from a guy that took the time to video his install. Got to love YouTube. Looks sharp. Has performed as expected. Zero issues. If you have a Sierra EV, get this cover.
Anonymous
03/27/2026
Great high quality cover!!
We added this cover before taking a long camping trip we made out west. It really expanded the storage capability of our truck and allowed us to organize our camping gear and keep it organized for the entire trip. The cover is easy to flip up and with Honda's innovative tailgate getting into and out the bed of the truck was made a breeze. We're very happy with the quality. Installation was fairly easy. Attaching the adapter rail for the Honda was a little tricky but with a little patience and with a couple tries we got it on.
Kristen W.
Verified
08/21/2026
Poor quality
The first backflip we received had a divet in the panel. They sent us a new panel that had the corner cover damaged and the screw pulled out. It was for a Long bed truck and it didn’t come with full length solid rails we had to add the extra 2’ which wasn’t easy and was annoying. Since we have been using it for over a month, 4-5 of the protective foam pieces have come loose and fallen off and we have tried to put some back on but they keep falling off. Overall this seems like a very low quality truck bed cover with components that can’t hold up to hardly any use or the outdoor elements. Very disappointed in this product.
Ricky B.
Verified
02/19/2026
The BAKFLIP MX4 hard folding GEN3 is great
I just love how it sits on my truck it makes it look very distinguished
Michael F.
Verified
01/18/2026
Very good
Nice product super easy to install but grab a friend its much easier. Product fits the bed nicely. And the lathes made it easy to fold up. If I had one critique I wish the cover on the Cab side was convex to match the shape of the bed on my 25 raptor. Small critique would make it perfect other than that it still gets an A+ from me.
Mohamed Z.
Verified
01/02/2026
Great fit
Ive been wanting a hardtop cover for months but I waiting to sell my camper shell, finally I was able to find the correct match since my truck is eight feet bed. It wasnt an easy task to find the correct one! This one looks great on my truck
Alan L.
Verified
10/07/2026
New install
Only took me an hour to install. Great looking.
Anonymous
03/09/2026
Best cover ever
I highly recommend the Bakflip best bed cover I've ever had, very easy to install, great quality
Cornelius J.
Verified
12/12/2025
Bakflip
Overall so far the cover is great I have no complaints a couple people I know say they have problems with theirs before so I'll just have to wait and see but for me it's great no problem
Michael
Verified
12/10/2025
Love the BAKFlip
Love the BAKFlip but disappointed missing bolts for the Snap to hold it while flipped up. But over all very pleased with the product.
Benjamin T.
Verified
10/06/2026
F150 Lightning fits and looks great
Great price for a quality product. Easy to install. Shipping took way longer than expected. The final setup looks amazing.
kevin c.
Verified
12/08/2025
Amazing Bed Cover
The BAKFlip MX4 was real easy to install and works great. Drove through a severe down pour and everything in my bed remained dry. I feel it may be helping with gas mileage as well. The individual sections allow me to access the everyday essentials in the rear of the bed without having to flip the entire cover open. Worked perfect for camping.
Anonymous
02/19/2026
5stars
Easy to install. Easy instructions to read. Super sturdy. And pretty much water tight
Martin G.
Verified
12/03/2025
Awesome Hard cover!!
Love the look sleek and low profile, keeps 90% of the water out of the bed even though a high pressure car wash. Need to see the long term durability. Over all great coverpretty simple install even for the carbonpro bed.
Kevin W.
Verified
05/02/2026
MX4 Gen 3
I like the cover especially because it's a hard top. There still is leakage and some parts, like the seal, seem to be fragile. Mines popped off. I have to move it a little to make it lock. If I have to use my whole truck bed, it covers my whole back window. I do like the steak flush look. I like that it easily opens with the pull down. I also like the fact you can close it with the truck bed door open or closed. Overall I like it, but for the price, definitely wish there were some things that were better.
David G.
Verified
10/06/2026
Perfect fit. Really satisfied
Perfect fit. Really satisfied
Susan C.
Verified
11/26/2025
Backflip for Sierria EV
Flawless fit. And was much better than I expected for the price.
Jeremy
Verified
08/11/2026
Poor Q/A inspection
While the cover looks good the quality of parts were defective. I had to call for replacement and repair parts twice. The cable to release the lip broke due to poor workmanship. I had to replace the latch myself after only 2 weeks. This is way overpriced for having to fix it myself.
Jtmalone86
08/18/2026
Great utility, quality not as much
My wife had one of these on her 2010 nissan titan and it was perfect in every way. So when we bought a newer truck (2015 ram 2500) we wanted to get the same cover. Tonneau was shipped quickly, was packed well and had easy instructions. The fitment is perfect and the overall utility is great. I espec6like how it acts as a headache rack when fully up and out of the way. I've had this item for a year now and have had it opened and closed around 30-40 times. The wire for the section closest to the tailgate broke. Inside the latches the wire is looped and crimped on and it slid out of the crimps. So I had to buy new cable and fix it. Works like a charm now. I will say the other stock cables work well and have not broken. Other issue is the clips that hold the seal into the side of the tonneau keep popping out. They pop back in easily but it's definitely annoying and causes the seal to…
duke
09/12/2026
quiestionable longevity
I have this cover on a 2021 F250. I work in the construction industry and need to open it often. The corner pieces have fallen off and the coating doesn't hold up to medium use. The seal leak in various places. If this is something you rely on, I would consider other brands.
Logan S.
Verified
11/14/2025
Looks Great but Leaks
I love the low profile look of the cover but it leaks in the corners by the cab. I even purchased some silicone putty to fill in the gaps between the bed and the cover, but it still leaks.
Alex S.
Verified
08/06/2026
I am happy with the
I am happy with the product. It works well. My goal was to purchase a more heavy-duty cover, but currently it is not made for the 2026 GMC Sierra AT4 EV. If that ever changes please contact me as I most likely will be interested.
Gary C.
Verified
11/13/2025
Needs Additional Latch set
Second fold from rear window needs a latch set. The joint raises and lowers after your speed reaches 70 mph and above. This can lead to water leaks at the joint. Contacted company, but would not fix problem or refund money. They said this is normal function of the cover. This problem is caused by the design of the aerodynamics of the truck with the Cab Air Deflectors. This is different from all other Chevy Trucks.
Marc C.
Verified
06/07/2026
Tonneau cover is nice - but damaged inside of packing
The cover went on well but once I installed it, I noticed the clip that holds the strap for locking into place in the folded position, was broken off. I found the broken piece in the packing material. The only real fix would be to send the whole cover back and I needed it for my truck. I guess I should have looked it over more closely when I removed it from the packing.
Noel M.
Verified
05/07/2026
It's good, but not 100%.
It's good, but not 100%. The corners on the front have an opening where water can get in, and it's a bit hard to open.
Kristyn
Verified
03/18/2026
Easy install, nice looking
This tonneau cover was even nicer looking than I thought it would be. Super streamlined and matches my Rhino Lining bedliner somehow. The only complaint is that I installed it three weeks ago and the adhesive foam strips are peeling up already. The truck is garage stored and it’s summer so it hasn’t been in the elements yet.
Garrett N.
Verified
03/14/2026
2026 gmc Sierra AT4X 6. 6L diesel
I installed in myself. Took me 5 hours the only struggle I had was reconnecting fuel lines. Only thing was I wish it had the brackets from the fuel pump to where the connectors end.
Daron N.
Verified
07/23/2026
Disappointing Quality for the Price
For the price I paid, I wouldnt buy this cover again. The biggest issue is with the long-bed rails. They come in two pieces, but only include three mounting clips. Because of this, its very difficult to get the rails properly aligned during installation, and they never seem to line up quite right. The adhesive rubber bumpers have already started coming loose after being exposed to warm weather. Lastly, the cover gets extremely hot in direct sunlight. It becomes uncomfortable to touch and makes it painful to open when needed. Overall, Im disappointed. For what this cover costs, I expected better quality and a better-designed product. Now that its installed, I feel stuck with something Im not satisfied with.
Dave B.
Verified
10/09/2025
Ok
With the longer bed this cover doesn’t allow you to transport with just one fold. Any suggestions. Also, any suggestions on making it less water resistant?
Nate
Verified
07/23/2026
Leaky
This is the least weather proof cover Ive ever owned, on top of that it rattles on any pot hole or bump. The only thing this cover has going for it is the appearance.
Joseph G.
Verified
07/07/2025
Clamps weren't right
The clamps don't seat well against the metal behind the cap rail plastic. So, they can't hold straight when closing the cover. I contacted support and they said to send a picture and over a week later I've gotten nothing back after additional email. Pretty disappointed that something so simple couldn't be resolved quickly. I have put backing material in place until they figure it out so I can at least use it. The tailgate seal was also not seated correctly so I had to take it off and reseat it. For such an expensive product they really aren't doing the small parts well.
Danny S.
Verified
09/20/2026
Too short
Love everything about the cover except that it’s too short. It barely covers the edge of the bed at the front and just touches the tailgate. Seems about two to three inches shorter than it should be so it doesn’t keep the water out at the tailgate and it’s not very secure for theft.
Andy
Verified
09/09/2026
Used bed cover
The foam was glued together and bed cover looks worn and half of the parts are missing . Took it to a place for an install and they told me this is definitely a used item. Wasted a whole day!
Jerry D.
Verified
07/25/2026
Not engineered well for ridgeline
very difficult to get to fit. RETURNED. Thank you for no hassle.
Danny B.
Verified
07/21/2026
1 star
Product is flimsy. You can see light escaping through the cracks from the outside. Plenty of water gets inside. Side trims are always falling off rail. Always looks dirty or faded. Side stands don’t hold up box correctly.
Dale T.
Verified
06/23/2026
Hard folding
I am very unhappy with the fit. It does not allow the tail gate of my 2026 Nissan frontier to properly close. I have to position it further forward on the bed to make it work. I would not recommend this cover or the company.
Jeff S.
Verified
06/16/2026
Be aware of damage and no customer support
Damaged bed cover and no help from customer servic
James I.
Verified
05/16/2026
Will not fit 2025 Nissan Frontier Pro X
I like the appearance and a parent quality of the product, but it would not work on a 25 Nissan frontier the rear latches would not come down enough to latch so I had to return it. customer Service was very helpful and I had no issues so far still waiting on my refund.
Marie C.
Verified
05/12/2026
Nope
It looks unfinished. The rubber molding on the sides creased up were it folds. I gave it some time n the heat to see if it would flatten and it didn’t. The corners by the cab looked unfinished. The installation of the rails was horrible, yes I did it right, and it still didn’t close and lock wo slamming it or lifting on the side rails get it to lock. For the amount of money it cost I expect much better. So I returned mine and went with another brand from another company. And am very happy now. No rubber flap edges. Easy install and locks every time. Yes: the return process was fast and easy, but I’m rating the product.
Dan C.
Verified
05/11/2026
Bakflip MX4 Ram truck w/rambox
I’m very disappointed with this product. It leaks at both the front and rear, which defeats the whole purpose of having a bed cover/top in the first place. The instructions were also a major issue. I have a Ram with the RamBox bed, but the instructions provided were for a Chevy 1500. The installation is not the same, and it made the process much more frustrating than it needed to be. Had I known the product would not seal properly and that the correct truck-specific instructions would not be included, I would have chosen a different top. At this point, I honestly wish I could return it.
Ernest S.
Verified
05/07/2026
Substandard Cover
After making several adjustments to maintain the cover from dismantling, I reached out to customer service but have yet to receive a call.
Jeffrey S.
Verified
07/21/2026
Leaks everywhere
If you want a cover that does not leak look somewhere else. It has been installed correctly and it's still does not prevent water from entering the bed. . after a good rain the bed as water in it do not keep anything that is valuable in your bed.
Chad M.
08/29/2026
Backflip MX4 Bed cover honest feedback
First of all, I don’t like to bring bad news, that being said, here it goes. Last year 2022 in may, I received my first MX4, it looked great! I had little trouble with installing it, about 30 mins I’d say. My issue is with the overall durability or thickness the bad cover aluminum, it dents so easily. One hailstorm and it looked like a golf ball. Ugh, that was just having it for a few months. The company was receptive to my concern, and sent me a “fiberglass” one to hopefully correct the issue. The next light hailstorm and it was another golf ball. I’m not sure if they sent me another aluminum one by mistake, or their fiberglass dents vs. cracks? It’s just a lot of money to ruin the look of your otherwise tough looking truck. Sorry Bakflip, you even tried to make it right by sending me another one, and still failed. Makes me feel a little sick.
RichieT
07/07/2026
Good but not perfect
Looks good, I like that it folds all the way for full bed access. One of the bumpers for when it is fully open blew off. Still leaks water inside. Could probably use to be made a little longer for more coverage over the tail gate. I was expecting better for the money I paid for this thing. I have a cheaper one on a different truck that leaks about the same. I going to try some extra gasket in places and hope for the best.