BAKFlip MX4 hard folding tonneau cover on a gray Toyota pickup, rear panel folded forward
BAKFlip MX4 tonneau cover partly folded on a faded pickup with a Best Seller badge
Tonneau cover folded up to the cab with the bed loaded, captioned full bed access
View from the tailgate of the BAKFlip MX4 folded against the cab, captioned America's best-selling truck bed cover
Steel toolboxes stacked on the closed cover panels, captioned built stronger
Water splashing on the cover panel surface, captioned sealed edge-to-edge
Ghosted pickup showing the BAKFlip MX4 panels with a New and Improved badge
Close-up of the BAKFlip MX4 rail with the automatic latch outlined, captioned automatic security
Hand tightening a BAKFlip MX4 rail clamp with a ratchet, captioned easy one-person install
BAK badge on the BAKFlip MX4 rail end cap
Best-in-class warranty shield over the BAKFlip MX4 panel texture

BAKFlip MX4 Hard Folding Tonneau Cover for 2007-2021 Toyota Tundra with Deck Rails (5'7" Bed)

$1,249.99 $1,566.99 Save $317.00
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear
Flash Sale Ends in--:--:--

Free gifts included with your order

Details
Details
Details
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
  • Guaranteed FitmentTeam-confirmed fit or money back
  • No Sales TaxZero sales tax on every order
  • 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

+1 (470) 823-2453 Email Us
Locks the moment it closes
Sealed edge to edge
Multi-layer aluminum panels
Folds to the cab, drive open Folds to the cab, drive open
One-person install
The original hard-fold cover

Features

  • Locks the moment it closes: BAK's patented auto-latch engages as each panel closes, so there is no separate locking step. BAK says the Gen 3 lock parts were re-engineered to resist forced entry better than the Gen 2. To open it, drop the tailgate and pull the release cable.
  • Sealed edge to edge: Revised EPDM rubber perimeter seals and tight-fit clamps close the gap between the cover and the bed rails, and on most trucks a dual-action tailgate seal, 13% longer than before, covers the tailgate. Drain tubes carry off water that reaches the rails. BAK's own sheet notes the cover is not airtight, so think weather-resistant, not sealed.
  • Multi-layer aluminum panels: Aluminum top panels sit over high-density polymer cores on aluminum side rails. BAK says the Gen 3 panels are 22% stronger than the original MX4, and the closed cover is rated at 400 lb, evenly distributed.
  • Folds to the cab, drive open: Fold the panels to the cab, strap the cover to the buckles at the bulkhead and drive with the bed open for tall loads. Flipped fully upright, prop rods hold it against the cab on rubber bumpers. BAK says it is the only hard fold that leaves your 3rd brake light visible in every position.
  • One-person install: Click-in clamps hold the rails to your bed rails, with no drilling on most trucks, and one person can do the job. BAK rates it at 30 minutes or less (Level 1) and says the new click-in design cuts install time by 12%.
  • The original hard-fold cover: BAK says the MX4 defined the hard-folding category and calls it America's best-selling truck bed cover. The Gen 3 version (model year 2025) sits flush with the bed rails and wears a textured matte black finish on every surface.

Description & Fitment

Own a 2007-2021 Toyota Tundra with the factory deck rail system, 5'7" bed, without the Trail Edition package? This is the BAKFlip MX4 that fits it. To open it, drop the tailgate, pull the release cable and fold the panels toward the cab. For the install, its rails bolt to the factory deck rails with T-nut kits; BAK rates it at 30 minutes or less. That box runs about 66.7" along the floor. Its Gen 3 aluminum panels sit over a high-density polymer core, and BAK rates them 22% stronger than the original MX4. Revised EPDM perimeter seals and tight-fit clamps help keep weather out, and drain tubes carry off water that reaches the rails. Trucks without the factory deck rail system take BAKFlip MX4 448409 instead. It carries BAK's 5-year limited warranty.

Fitment & Compatibility

Toyota
Years Model Bed Notes
2007-2021 Tundra 5'7" (66.7") w/ Deck Rail System, w/o Trail Edition Package

Check your bed: measure along the bed rail from the bulkhead to the inside of the closed tailgate. This part is for the 5'7" bed on the 2007-2021 Toyota Tundra with the factory deck rail system. BAK's own brands list this box at 66.7" long. Fit notes from BAK: with the factory deck rail system (2007-2021 Toyota Tundra); without the Trail Edition package (2007-2021 Toyota Tundra).

Not for: the 6'7" bed (BAKFlip MX4 448410 or 448410T, by truck and option), trucks without the factory deck rail system (BAKFlip MX4 448409). 2022-2026 trucks with the same bed take BAKFlip MX4 448440.

About BAK Industries

BAK.

BAK makes hard tonneau covers. BAK bills itself as "America's #1 truck bed cover."

The range splits into BAKFlip hard folding covers (MX4, MX4 EZ-Lift, MX4 TS, G2, F1 and Fibermax) and Revolver hard roll-ups (X2, X4s and X4 TS). The MX4 is the aluminum-panel BAKFlip that BAK calls America's best-selling truck bed cover; the MX4 TS adds T-slot rails and the MX4 EZ-Lift adds a lift-assist system.

Authorized BAK dealer. Prestige Truck is an authorized BAK dealer, so what we sell is new and genuine BAK. BAK's warranty "is nontransferable and applies to the original purchaser of the BAK product only," and BAK requires warranty registration on file or proof of original purchase (a detailed, dated receipt) for warranty service. Your Prestige Truck order receipt is that proof.

Frequently Asked Questions

Will this fit my 2007-2021 Tundra deck rails?

Yes, if it has the 5'7" bed, without the Trail Edition package. Measured along the floor, that box is about 66.7". Measure along the bed rail from the bulkhead to the closed tailgate, and note it is not for the 6'7" bed (BAKFlip MX4 448410 or 448410T, by truck and option) or trucks without the factory deck rail system (BAKFlip MX4 448409). If you are unsure, send us your VIN and we will confirm.

What if my truck is not equipped with the factory deck rail system?

Then this one is not the right part: BAK lists BAKFlip MX4 448409 for Toyota Tundra trucks without the factory deck rail system. This page is for trucks without the Trail Edition package.

What changed with the Gen 3 MX4?

BAK lists stronger panels (high-density polymer cores, 22% stronger than the original MX4), re-engineered lock parts that resist forced entry better than the Gen 2, revised EPDM perimeter seals and tight-fit clamps, a dual-action tailgate seal 13% longer than before, re-engineered prop rod clips, and a click-in design that it says cuts install time by 12%.

Will it keep rain and snow out of the bed?

It is built to: edge-to-edge seals and tight-fit clamps close the gap to the bed rails, and drain tubes carry off water that reaches the rails. BAK's own install sheet says the cover is not airtight, so plan on weather-resistant rather than sealed. Clear snow and ice off before you open it; that is a warranty condition too.

How much weight can it hold?

BAK rates the closed cover at 400 lb, evenly distributed. BAK's sheet also says not to drive with objects on top of the cover or tie cargo to it.

Can I drive with it folded open?

Yes. Fold it toward the cab and attach the straps to the buckles at the bulkhead, pulled snug, and you can drive with the bed open. The cover must be secured at all points while the truck is moving; that is a condition of the warranty.

Installation

Install time 30 minutes or less (BAK's figure)
DifficultyLevel 1simple installation; one person
TypeClamp-on, or bolted to the deck rails with T-nuts
Tools
  • a 1/2" wrench or socket and a Phillips screwdriver
  • plus scissors or a utility knife, isopropyl alcohol, 5/8" drill bit and drill, T-30 Torx driver, 3/8"-drive short extension and ratchet

Here's the short version. Follow BAK's install sheet (below) for your truck's exact clamp positions and settings.

  1. Prep the bulkhead. On 2022 and newer trucks, push a foam filler pad, adhesive end up, as far forward as it goes against the bulkhead on each side, and stick the cab bumper into the bulkhead valley.
  2. Mount the rails. Without the cargo management system, set each rail's L-shaped top on the bed rail, drain fitting at the cab against the bulkhead, and fit three clamps (one 6-8" from the bulkhead, one in the middle, one near the tailgate), starting with the middle one. With the deck rail system, remove the accessory-rail end caps, slide three T-nut kits into each accessory rail and bolt the rails on using the front half of each clamp with the kit's hex bolt and washers. Either way, tighten to 10 ft-lb with a 1/2" wrench or socket; don't over-tighten.
  3. Route the drain tubes. Fit the drain tubes to the front of the side rails. On most 2007-2021 trucks, drill a 5/8" hole through the rubber plug in the bulkhead on each side; on newer trucks, open up the existing floor hole with a 5/8" bit. Run each tube end through its hole.
  4. Prep the cover. Slide the two cover retainer clamps into the track under the cab end of the cover, one per side. Peel the liner off each gasket, stick it under a buckle end, and screw the two buckle ends into the pre-drilled holes on the front header panel with the screws and nutserts. Hand-tighten only; don't use a screw gun. The retainer clamps go on the side rails, never on the front cargo rail.
  5. Set the cover in place. Lay the folded cover on the side rails at the cab end, centered between them, and turn the retainer clamps clockwise until the lock washer is snug. With the cover still folded, clean the spots for the cab bumpers with soap and water, then isopropyl alcohol, let them dry and stick the bumpers along the top edge where the cover meets the cab.
  6. Unfold, adjust and check. Unfold the cover toward the tailgate and center every panel side to side and front to back; the rear edge and tailgate seal rest on top of the tailgate with a 1/2" overlap. With a power tailgate, make sure it still works with the cover closed. Release each latch to check it engages the rails (the sheet shows how to adjust a slam latch), then re-tighten the retainer clamps. BAK's warranty asks you to re-check every clamp after your first week of driving.

Stuck on a step? Ask our install experts

What's included
  • Hard fold cover
  • Driver side rail
  • Passenger side rail
  • 2 cover retainer clamps
  • 6 clamps
  • 2 buckle ends
  • 2 gaskets
  • 4 screws
  • 4 nutserts
  • 6 T-nut kits (5/16" flat washer, 5/16" lock washer, hex head bolt)
  • 3 D-shaped cab bumpers
  • 2 drain tubes
  • 2 filler pads
  • 2 cab bumpers

Specifications

BrandBAK
Part Number448409T
Cover TypeHard folding
GenerationGen 3 (model year 2025)
Top PanelsAluminum over a high-density polymer core
Side RailsAluminum
FinishTextured matte black
Load Capacity400 lb, evenly distributed
LockingPatented automatic latching
SealsEPDM perimeter seals; dual-action tailgate seal on most trucks
DrainageIntegrated drain system with drain tubes
Bed Access100% when folded against the cab
3rd Brake LightVisible in every position
MountingClamp-on, no drilling on most trucks
Warranty5-year limited
Fits2007-2021 Toyota Tundra with the factory deck rail system, without the Trail Edition package
Bed Length5'7" (66.7")
UPC819275042659

Warranty, shipping & returns

  • 5-year limited warranty

    BAK covers the BAKFlip MX4 against defects in materials or workmanship for five (5) years from the original date of purchase.
    • A defective cover or hardware component is repaired or replaced, at BAK's option; BAK may substitute a newer model with similar form and function.
    • It covers the original purchaser only and is not transferable. Warranty registration must be on file, or keep a detailed, dated receipt as proof of purchase; contact us for help with registration or a claim.
    • To keep it valid: clean with mild automotive soap and water only; keep the cover secured at all points while driving; check all clamps and retention parts for tightness after a week of driving after installation (or reinstallation) and now and then after that; clear snow, ice and anything else off before opening; never tow the truck from the rear with the cover on (remove and store it first).
    • Claims: get a Return Material Authorization (RMA) number from BAK before returning anything. BAK may ask for the part back postage prepaid, and shipping charges apply to a repair or replacement. A claim needs your order number, contact details, vehicle, part number, a description, the receipt and photos.
    • Not covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that is not a defect in material or workmanship. BAK does not accept returns of non-defective products once installed.

  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Order by 5 PM ET on a business day and it starts processing the same day.
    • This cover is an oversized item, so it ships by freight or as an oversized parcel.
    • Most orders arrive within 1-5 business days.
    • We email your tracking number as soon as it ships.

  • Inspect on delivery

    This cover ships in a long, heavy box. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.

  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.

What our customers say

4.6 · 5025 reviews

Photos from owners

+161
Harry J. Verified
07/06/2025

Tonneau top

Love this tonneau top, had several and this definitely is a 5 star. Had to tweak it but in the end well worth the money. Quality built. Drove in tropical storm conditions, completely dry in the bed!

David R. Verified
09/27/2026

BAK MX4

Just as advertised. Arrived within three days, easy to install and looks good on my black 2024 GMC 2500 Denali. Very useful and allows me to store items securely in the truck bed.

Louis P. Verified
09/18/2026

22 Tundra S/B

Love the look and function of this product. Would recommend purchasing one for yourself.

Blake Verified
09/08/2026

Great look/ fit!

Fits perfectly and looks great. My second Bakflip MX4 and will most likely always have one. The only bad I can say is the 30 minute installation time they say it will take is WAY off. I have over 10 years of experience working in automotive accessory installation and my dad owned/ retired from his own business installing vehicle accessories and it took us approximately 1. 5-2 hrs to install making sure it all lined up correctly and was adjusted appropriately. Not impossible just time consuming.

omara25
07/03/2026

Great cover

Great cover. Easy install, took about 30 minutes to install.

Michael Verified
08/10/2026

2022 Tundra 4x2 short. Bed

Fits like a glove. No hiccups with the installation.

Joel G. Verified
07/24/2026

Bakflip MX4

Quality product. Took my time throughout the installation video.

Seth D. Verified
06/02/2026

Worth the money

I shopped around and watched a bunch of you tube videos and decided on this one. I also decided to go the extra money and get the one that folds up to the cab. Installation for so so. Not hard but I had to make some changes to get clips on both sides to lock by the tail gate. Absolutely worth the money

Brian B. Verified
08/11/2026

Latch broke in less than a month

Latch broke in less than a month How do I get support? I have pictures of the latch which pulled out of the cover

Ralph P. Verified
04/29/2026

BAKflip MX4 works great! Easy install

Easy to install, I have not seen any water getting in. Works great!

Anonymous
01/27/2026

MX4

Easy installation, fits great and works very well. Great addition

Thomas G. Verified
11/29/2025

Bakflip mx4

I was able to install with help of utube video. Online text instruction were not completely clear. So far unit is working well. Curious as to how it will perform in the snow

Tommy S. Verified
08/29/2025

I’ve been completely satisfied with

I’ve been completely satisfied with my BAKFlip MX4. The bed cover looks great on my truck and the ease of installation was exactly as advertised. I would recommend the product to others.

Ryan M. Verified
08/20/2025

Very nice!

Awesome cover, nice and flush, looks great!

Donald M. Verified
07/06/2025

Great

This is the 3rd one I have had & it is great.

James
07/23/2025

BAKFlip MX4

Love my BAKFlip, makes my Tundra look even better. Great for keeping my gear dry and protected.

Kirsten H. Verified
05/21/2025

Bakflip mx4

What can I say I love it. Fit perfectly. Easy to use and love that when it's closed that you can't open. It unless you open the tail gate. Water doesn't get in either

Yarin R. Verified
09/05/2026

Cover , no strong.

Fit perfect, the issue I have is when you are folding and keep open the cover, the air kick back the cover, it is not strong enough to hold, should be better quality for the price I pay, looks good but I was disappointed that did not function as needs to be.

David A. Verified
05/15/2025

Very happy with product very

Very happy with product very easy to install

Michael B. Verified
03/27/2025

2018 Tundra

Looks/works great and was easy to install. Really like that I can keep the cargo rail system. One hole was slightly mis-drilled and I was missing a parts bag. A quick call /email to them resolved the problem, no hassle at all. Overall I recommend this product!

Jacob K. Verified
02/18/2025

2024 Tundra Perfect Fit

Love the cover. Easy to install. Great protection and feels livery high quality.

Dane B.
09/09/2026

2015 Tundra

Cover looks great and was easy to install by myself. Was well protected in shipping.. Seems solid. Ran it thru the carwash and bed was dry. Very happy with the purchase.

Brad C. Verified
01/27/2025

MX4

I had a G2 previous and they made a lot of little upgrades like water venting and clips to tie it back. It looks great on the truck.

Joe T. Verified
01/05/2025

Awesome

Quick install, great product. Sturdy. Looks amazing.

Monte H. Verified
11/22/2024

Great tailgate features.

Love this product and the fact you can close the tailgate without having to open the top first. Arrived quickly in two containers and my brother helped me with the installation which only took 25 minutes start to finish on my Toyota Tundra. No rattles or vibration even in high winds. The look and function are exactly what I was looking for.

Theodore H. Verified
11/19/2024

Tonneau on Tundra

Nice product. A bit overpriced in my opinion. Not water-tight but close.

Nigel M.
03/20/2025

Bakflip MX4 review

This is an awesome product! I bought the MX4 for my Tundra. It was easy to install, looks great on the truck and adds security when storing items in the bed. I fold it back to transport my mountain bike and the cover is easily removeable when we needed to transport furniture

Gregory M. Verified
09/15/2024

Cover

Overall a good product. I installed this cover myself and the instructions were clear and concise. Looking forward to years of use.

Dustin F. Verified
08/25/2024

2024 tundra 5’7”

Fits perfectly

Cameron J. Verified
07/16/2026

Leaks too much for price

The cover looks beautiful. Install was easy. But near the front of the bed on the right side water has a consistent drip during a med-high rain. If I was to know this leaked this much I would have bought a cheaper alternative. This review does not allow for media but I would post if I could.

brian c. Verified
06/21/2024

BAKFlip cover

Great product. Installation is fairly easy.

GILBERT S. Verified
05/22/2024

Installation would be a 5

Installation would be a 5 however I did not receive the necessary shims to install. To date have not received the necessary parts to complete the installation. This is my second purchase of a Bak Flip same model different year. The quality of the rails is poor in comparison to the one I bought in 2019.

Brian
05/24/2026

Good fit, simple install, looks great

Very happy with the BAKFlip MX4. It arrived quickly and was not difficult to install. It fits well overall, the only slight leakage I’ve seen is around the tailgate corners. Looks great and is very easy to open and close.

Patrick R. Verified
04/21/2024

Excellent Cover

Second MX4 I've purchased. Had my first on my 2017 Raptor for almost 7 years with no problems. Traded that in with the MX4 on it for a 2023 Tremor. Bought a new MX4 for that truck. Good to see that at some point they have beefed up the clips that hold the struts (that support the cover in the full open position) when not in use.

Melanie P. Verified
02/14/2024

We absolutely love it! We

We absolutely love it! We put it on a few weeks back. It's very protective, and water has not gotten inside the truck bed…even in the worst of storms.

Bruce W. Verified
04/19/2026

Super looking bed cover

A few tweaks and it would be 5 stars. Installation instructions should be updated to reflect bed clamps and not a footnote. A level of security would put the Bakflip Gen 4 over the top.

Rey Verified
07/16/2025

Definitely a must for all

Definitely a must for all trucks. It's just a convenient way to secure items in the bed of the truck. There are a lot of brands that make these covers, but decided to purchased the BAKFlip. No regrets, easy install.

Patrick
07/17/2026

BAKFlip MX4 Tonneau

Love it, keeps everything dry, with locking tailgate all is safe inside to👍

ty Verified
07/06/2025

BAKFlip MX4 Tonneau Cover

We installed this cover onto our 2019 tundra crewmax. The install was easy and took about 45 mins. It gives decent security to the bed of the truck but can be breeched by someone that knows what they are doing. It is acceptable for us to keep our stuff in in hotel parking lots and not worry too much. It sits low over the top of the bed with a nice flat look compared to other covers out there. The quality seems great no real complaints with it. There is one piece of weather stripping seal material that would slide out of its track but after crimping the track a little bit with some channel locks that problem went away. I knew before I bought the cover that it wasn't going to be completely weather tight and it's not. It does keep almost all the water out in the rain while driving but some still does get in the bed along the sides of the cover. If I were to have luggage that couldn't get…

Steven B. Verified
03/22/2025

Fit and looks ok

the trouble with buying on line, you can't see it, feel it. I chose between a roll up and the fold up, now wish I had chose the roll up. This has many hard surfaces and lots of seams with rubber seals as opposed to one surface that was vinyl. In high wind the back two sections jump up little because they do not have a latch on the first seam which I understood all seams did.

Jerald S. Verified
09/14/2024

Good but not great.

I like the looks of the cover and the functionality. I wish it would have come with 8 tie down brackets instead of 6. The side rails seem a little light weight so when you go to close each section you really have to slam it. After closer inspection it seems that the side rails bow a little bit when you slam it and the latches don’t catch. I tried their recommended adjustment but that only allows you to move the latch in and out not up and down. This problem might go away as it settles over time where the latch will make better contact with the side rail. The extra tie down would allow you to put one near each latch and would make things a bit firmer. It does leak a bit up towards the cab. I have a Ford fiberglass bed liner and the instructions say to not use the foam tape. I am going to go back and add that all the way across and see if that will eliminate my leak. Lastly I am a DIY…

Dennis R. Verified
08/23/2026

I wish I bought the MX2 instead.

I had an MX 2 installed on my 2017 Tacoma in January 2017. When I recently bought a 2023 Tacoma I wanted the BakFlip for it. The MX 2 is so much easier to install and it aligns with no issues. I had to keep adjusting the rails to improve the fit. The right side of the cover did not close all the way; there was a 1/4 inch gap. Part of the problem was the rubber seal improperly installed at the factory. I managed to peel it back and adjust it as it should have been.

John M. Verified
07/24/2024

Great Cover and fits well

Love the cover. The rails mounted differently than the video showed, but the printed instructions were up to date. The new design didn’t require my rails in the bed of the Tundra to be removed, however it no longer allows the Toyota cleats to mount on the side rails which is ok.

Joshua
07/07/2026

Exactly as advertised and what

Exactly as advertised and what I was looking for!

Darren M. Verified
07/21/2024

Not bad but not great

The concept is there but execution is lacking. The brackets that clamp the side rails on a Tundra with accessory rails could be designed better. It's hard to get them level. The bumpers that cushin when the sections are folded back are just barely stuck on and one was just floating in the box. I used gorilla glue to stick it back on for a more permanent installation. The strap hooks are crazy cheap plastic. One was broken on arrival but they are so cheap I'm not even going to bother to ask for a replacement as I don't think it will last very long. The cover itself looks like it will do the job and hold up for a long time. The latches are opened by pulling the latch cable rather than a handle or lever of some sort. Seems like they engineered the cover well and everything else was an after thought. Time will tell.

Jeremy W. Verified
09/09/2026

Great, but a dent on shipping

Everything was great, but the box was beat up a little. Upon opening the box, there was a small dent on the inner portion of the cover. Not big enough to return, just big enough to notice.

CONNER Verified
08/07/2026

BakFlip MX4

I’ve been wanting the BakFlip MX4 for my 17 F150 for a while and I finally broke down and bought one. It’s everything I thought it’d be. It’s has great quality, durable and can easily be installed within a couple hours by yourself, but an extra set of hands doesn’t hurt.

Jill H. Verified
10/08/2026

Perfect

Excellent product. Easy install. My boyfriend loves it.

Calvin
06/18/2026

Fantastic Tonneau Cover

No regrets here! Easy install, tight fit, sturdy construction, simplistic function. What more can you ask for? No issues so far. Love that it folds all the way up if need be. Feels extremely secure.

Jeffrey P. Verified
06/20/2026

Better then expected.

Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.

Richard A. Verified
06/04/2026

2026 Maverick cover

This is my third truck to install bak flip tri fold hard cover. Each one was improved and better than the last. My only issue was a wrong part was packed with mine so I had to call customer service to ship out the correct part. I think I have had this issue on the last two covers. Issue was always resolved in a professional and professional way but it is just an added cost to you and an extra step for the customer. You dont expect this from this price point.

Gregory D. Verified
10/08/2026

Great look

It installed easily, look great, and functions good.

Paul H. Verified
05/18/2026

Sturdy, Looks great

Replaced a soft cover with this. So far its been great. Gear is secure. Easy install.

Albert P. Verified
05/16/2026

Expected a bit more for the price

First, watched the online video instructions for my year mode and make prior to starting. Small item, but 1/8" shims shown in the video were not included with my purchase. Second, both rubber bumpers that support the cover when in the folded position became unattached after 6 weeks without ever having the cover in the folded position. Third, both struts that are used to lock the cover in the folded open position are constantly vibrated from their holders and then hang down getting entangled in what ever cargo is being carried. Just a matter of time before they are broken off.

Scott K.
06/04/2026

Exactly what we were looking for!!

The fit on our 2022 Tundra is perfect. Love the mat finish. So easy to install and it is rock solid with the new design. Couldn’t be happier. Thank u!!

Bob K. Verified
05/16/2026

What a waste of time

First box came without hardware. Second box came with everything but was not straight with one side being longer than the other. They kept asking me for pictures and measurements till I had enough and sent it back for a full refund. Will never buy anything from them again. The funny thing is ,this is the second time they asked me to do a review on their junk.

Sidney C. Verified
10/08/2026

BAKFlip Excellence

I have purchased the BAKFlip MX-4 for 2 prior pickups and have been very pleased with the appearance, fit, materials, and workmanship. Thank you.

William L. Verified
05/14/2026

Better Than OEM with easy install

The Ford Maverick factory options are fine but the BAKFlip is heavier duty. The installation was easy and took an hour but I have installed one on my F350 previously. It may take a little longer for someone with no experience installing a bed cover. Instruction are easy to follow. The BAKFlip is popular so there are excellent videos of step by step instruction online. An advantage of the BAKFlip is it is more secure than a regular cover. It’s going to be hard for someone to break into my bed and steal anything.

Michael F. Verified
05/09/2026

2026 F350 6. 5

Love the new design. Light weight and excellent quality and design. Easy to install with minimal tool required and the looks are amazing. Super sleek.

Anonymous
05/06/2026

Easy Install

Extremely quick shipping. Customer service is top notch. Installed it in less than an hour. Clean flush look.

James R. Verified
10/08/2026

Topper

Got the cover quickly. Install was pretty easy but I did read and watch videos before install. My 11 year old grandson, he did most of the work inside the truck bed, and my son assisted. So you know it was a straight forward install. Love the topper.

Duane Verified
05/07/2026

Tonneau cover looks great and

Tonneau cover looks great and was very easy to install. It’s very easy to fold open and gives full access to the whole bed.

Michael R. Verified
05/06/2026

Awesome Cover

This BAKFlip is the best cover Ive had on any of my trucks by far. Easily installed and gives the truck a nice clean look. Dont hesitate buy one today!

Kenneth Verified
04/28/2026

BAKFlip MX4 Tonneau Cover

I’m very pleased with the fit, finish and ease of installation. A couple of pieces were damaged in shipping and customer service replaced them quickly. The only improvement that I can suggest is a heavier duty box to ship it in.

Anonymous
04/23/2026

Easy to install. Nice flat

Easy to install. Nice flat profile.

Kristen W. Verified
08/21/2026

Poor quality

The first backflip we received had a divet in the panel. They sent us a new panel that had the corner cover damaged and the screw pulled out. It was for a Long bed truck and it didn’t come with full length solid rails we had to add the extra 2’ which wasn’t easy and was annoying. Since we have been using it for over a month, 4-5 of the protective foam pieces have come loose and fallen off and we have tried to put some back on but they keep falling off. Overall this seems like a very low quality truck bed cover with components that can’t hold up to hardly any use or the outdoor elements. Very disappointed in this product.

Joel J. Verified
04/26/2026

BAKFlip Max4

Very easy install. Fits great and looks good also.

charles f. Verified
04/24/2026

It leaks

Was initially impressed with the bed cover. Appearance is great, installation was easy. But after a rain, water pools in the middle of the cover and begins to leak in the middle of the bed. Ive had numerous bed covers (roll up/soft trifold/hard trifold) and they all leak and I understand that it is unavoidable. However, other bed covers have leaked towards the cab or at the tailgate. This one leaks right in the middle of the bed. For the price I cannot and would not recommend this cover to friends/family.

Douglas B. Verified
04/20/2026

Best Value Tonneau Cover

Easy installation and very versatile tri-folding Tonneau Cover. Removes easily. Aesthetically appealing. Highly recommend.

Steve K. Verified
10/08/2026

Great tonneau cover

Great tonneau cover for the money.

Anonymous
03/18/2026

must like its my second one

New truck new backflip

Larry C. Verified
04/17/2026

Great Fit and Look

Excellent customer service and easy on line ordering. Packaged well and received with no damage. Easy install. Very pleased with look.

Reginald S. Verified
04/14/2026

The Best Truck Bed Cover Yet!

In 2015, I bought my first BakFlip and transferred it to my second Ram 1500. Here in 2026, I bought my third Ram and decided to get the new BakFlip design and am glad I did. Very easy to install and it took me less than 30 minutes. I love the finished look - like it's from the Ram factory. I like that the folded panels are really secured in place when driving and won't get whipped in the wind plus it leaves room for maximum cargo space. The upgraded cable system for latching and unlatching is another big plus. They really designed a great product and I recommend it over all the others out there. . . well worth the money!

Richard M. Verified
10/08/2026

bed cover

the cover added nice look to my chevy truck

Dennis M. Verified
03/30/2026

BAKFlip tonneau

Love it, easy install, great cover!

Thomas
03/12/2026

Awesome Cover

This is an awesome cover and easy to install. Took me 15 minutes max. Keeps my stuff dry and clean!

Lee A. Verified
03/05/2026

Solid

Everything I expected it to be. Same as GMs only less $. I rated medium on value because Im cheap :-). Seriously though, it was easy to install. I did it solo in about 45 min. Followed YouTube instructions from a guy that took the time to video his install. Got to love YouTube. Looks sharp. Has performed as expected. Zero issues. If you have a Sierra EV, get this cover.

Kevin W. Verified
05/02/2026

MX4 Gen 3

I like the cover especially because it's a hard top. There still is leakage and some parts, like the seal, seem to be fragile. Mines popped off. I have to move it a little to make it lock. If I have to use my whole truck bed, it covers my whole back window. I do like the steak flush look. I like that it easily opens with the pull down. I also like the fact you can close it with the truck bed door open or closed. Overall I like it, but for the price, definitely wish there were some things that were better.

Alan L. Verified
10/07/2026

New install

Only took me an hour to install. Great looking.

Ricky B. Verified
02/19/2026

The BAKFLIP MX4 hard folding GEN3 is great

I just love how it sits on my truck it makes it look very distinguished

Jeremy Verified
08/11/2026

Poor Q/A inspection

While the cover looks good the quality of parts were defective. I had to call for replacement and repair parts twice. The cable to release the lip broke due to poor workmanship. I had to replace the latch myself after only 2 weeks. This is way overpriced for having to fix it myself.

Jtmalone86
08/18/2026

Great utility, quality not as much

My wife had one of these on her 2010 nissan titan and it was perfect in every way. So when we bought a newer truck (2015 ram 2500) we wanted to get the same cover. Tonneau was shipped quickly, was packed well and had easy instructions. The fitment is perfect and the overall utility is great. I espec6like how it acts as a headache rack when fully up and out of the way. I've had this item for a year now and have had it opened and closed around 30-40 times. The wire for the section closest to the tailgate broke. Inside the latches the wire is looped and crimped on and it slid out of the crimps. So I had to buy new cable and fix it. Works like a charm now. I will say the other stock cables work well and have not broken. Other issue is the clips that hold the seal into the side of the tonneau keep popping out. They pop back in easily but it's definitely annoying and causes the seal to…

duke
09/12/2026

quiestionable longevity

I have this cover on a 2021 F250. I work in the construction industry and need to open it often. The corner pieces have fallen off and the coating doesn't hold up to medium use. The seal leak in various places. If this is something you rely on, I would consider other brands.

Logan S. Verified
11/14/2025

Looks Great but Leaks

I love the low profile look of the cover but it leaks in the corners by the cab. I even purchased some silicone putty to fill in the gaps between the bed and the cover, but it still leaks.

Alex S. Verified
08/06/2026

I am happy with the

I am happy with the product. It works well. My goal was to purchase a more heavy-duty cover, but currently it is not made for the 2026 GMC Sierra AT4 EV. If that ever changes please contact me as I most likely will be interested.

Gary C. Verified
11/13/2025

Needs Additional Latch set

Second fold from rear window needs a latch set. The joint raises and lowers after your speed reaches 70 mph and above. This can lead to water leaks at the joint. Contacted company, but would not fix problem or refund money. They said this is normal function of the cover. This problem is caused by the design of the aerodynamics of the truck with the Cab Air Deflectors. This is different from all other Chevy Trucks.

Daron N. Verified
07/23/2026

Disappointing Quality for the Price

For the price I paid, I wouldnt buy this cover again. The biggest issue is with the long-bed rails. They come in two pieces, but only include three mounting clips. Because of this, its very difficult to get the rails properly aligned during installation, and they never seem to line up quite right. The adhesive rubber bumpers have already started coming loose after being exposed to warm weather. Lastly, the cover gets extremely hot in direct sunlight. It becomes uncomfortable to touch and makes it painful to open when needed. Overall, Im disappointed. For what this cover costs, I expected better quality and a better-designed product. Now that its installed, I feel stuck with something Im not satisfied with.

Marc C. Verified
06/07/2026

Tonneau cover is nice - but damaged inside of packing

The cover went on well but once I installed it, I noticed the clip that holds the strap for locking into place in the folded position, was broken off. I found the broken piece in the packing material. The only real fix would be to send the whole cover back and I needed it for my truck. I guess I should have looked it over more closely when I removed it from the packing.

Noel M. Verified
05/07/2026

It's good, but not 100%.

It's good, but not 100%. The corners on the front have an opening where water can get in, and it's a bit hard to open.

Dave B. Verified
10/09/2025

Ok

With the longer bed this cover doesn’t allow you to transport with just one fold. Any suggestions. Also, any suggestions on making it less water resistant?

Nate Verified
07/23/2026

Leaky

This is the least weather proof cover Ive ever owned, on top of that it rattles on any pot hole or bump. The only thing this cover has going for it is the appearance.

Joseph G. Verified
07/07/2025

Clamps weren't right

The clamps don't seat well against the metal behind the cap rail plastic. So, they can't hold straight when closing the cover. I contacted support and they said to send a picture and over a week later I've gotten nothing back after additional email. Pretty disappointed that something so simple couldn't be resolved quickly. I have put backing material in place until they figure it out so I can at least use it. The tailgate seal was also not seated correctly so I had to take it off and reseat it. For such an expensive product they really aren't doing the small parts well.

Danny S. Verified
09/20/2026

Too short

Love everything about the cover except that it’s too short. It barely covers the edge of the bed at the front and just touches the tailgate. Seems about two to three inches shorter than it should be so it doesn’t keep the water out at the tailgate and it’s not very secure for theft.

Andy Verified
09/09/2026

Used bed cover

The foam was glued together and bed cover looks worn and half of the parts are missing . Took it to a place for an install and they told me this is definitely a used item. Wasted a whole day!

Jerry D. Verified
07/25/2026

Not engineered well for ridgeline

very difficult to get to fit. RETURNED. Thank you for no hassle.

Danny B. Verified
07/21/2026

1 star

Product is flimsy. You can see light escaping through the cracks from the outside. Plenty of water gets inside. Side trims are always falling off rail. Always looks dirty or faded. Side stands don’t hold up box correctly.

Dale T. Verified
06/23/2026

Hard folding

I am very unhappy with the fit. It does not allow the tail gate of my 2026 Nissan frontier to properly close. I have to position it further forward on the bed to make it work. I would not recommend this cover or the company.

Jeff S. Verified
06/16/2026

Be aware of damage and no customer support

Damaged bed cover and no help from customer servic

James I. Verified
05/16/2026

Will not fit 2025 Nissan Frontier Pro X

I like the appearance and a parent quality of the product, but it would not work on a 25 Nissan frontier the rear latches would not come down enough to latch so I had to return it. customer Service was very helpful and I had no issues so far still waiting on my refund.

Marie C. Verified
05/12/2026

Nope

It looks unfinished. The rubber molding on the sides creased up were it folds. I gave it some time n the heat to see if it would flatten and it didn’t. The corners by the cab looked unfinished. The installation of the rails was horrible, yes I did it right, and it still didn’t close and lock wo slamming it or lifting on the side rails get it to lock. For the amount of money it cost I expect much better. So I returned mine and went with another brand from another company. And am very happy now. No rubber flap edges. Easy install and locks every time. Yes: the return process was fast and easy, but I’m rating the product.

Dan C. Verified
05/11/2026

Bakflip MX4 Ram truck w/rambox

I’m very disappointed with this product. It leaks at both the front and rear, which defeats the whole purpose of having a bed cover/top in the first place. The instructions were also a major issue. I have a Ram with the RamBox bed, but the instructions provided were for a Chevy 1500. The installation is not the same, and it made the process much more frustrating than it needed to be. Had I known the product would not seal properly and that the correct truck-specific instructions would not be included, I would have chosen a different top. At this point, I honestly wish I could return it.

Ernest S. Verified
05/07/2026

Substandard Cover

After making several adjustments to maintain the cover from dismantling, I reached out to customer service but have yet to receive a call.

Jeffrey S. Verified
07/21/2026

Leaks everywhere

If you want a cover that does not leak look somewhere else. It has been installed correctly and it's still does not prevent water from entering the bed. . after a good rain the bed as water in it do not keep anything that is valuable in your bed.

Chad M.
08/29/2026

Backflip MX4 Bed cover honest feedback

First of all, I don’t like to bring bad news, that being said, here it goes. Last year 2022 in may, I received my first MX4, it looked great! I had little trouble with installing it, about 30 mins I’d say. My issue is with the overall durability or thickness the bad cover aluminum, it dents so easily. One hailstorm and it looked like a golf ball. Ugh, that was just having it for a few months. The company was receptive to my concern, and sent me a “fiberglass” one to hopefully correct the issue. The next light hailstorm and it was another golf ball. I’m not sure if they sent me another aluminum one by mistake, or their fiberglass dents vs. cracks? It’s just a lot of money to ruin the look of your otherwise tough looking truck. Sorry Bakflip, you even tried to make it right by sending me another one, and still failed. Makes me feel a little sick.

RichieT
07/07/2026

Good but not perfect

Looks good, I like that it folds all the way for full bed access. One of the bumpers for when it is fully open blew off. Still leaks water inside. Could probably use to be made a little longer for more coverage over the tail gate. I was expecting better for the money I paid for this thing. I have a cheaper one on a different truck that leaks about the same. I going to try some extra gasket in places and hope for the best.

Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question