BAKFlip MX4 hard folding tonneau cover closed on an orange Toyota pickup
BAKFlip MX4 tonneau cover partly folded on a faded pickup with a Best Seller badge
Tonneau cover folded up to the cab with the bed loaded, captioned full bed access
View from the tailgate of the BAKFlip MX4 folded against the cab, captioned America's best-selling truck bed cover
Steel toolboxes stacked on the closed cover panels, captioned built stronger
Water splashing on the cover panel surface, captioned sealed edge-to-edge
Ghosted pickup showing the BAKFlip MX4 panels with a New and Improved badge
Close-up of the BAKFlip MX4 rail with the automatic latch outlined, captioned automatic security
Hand tightening a BAKFlip MX4 rail clamp with a ratchet, captioned easy one-person install
BAK badge on the BAKFlip MX4 rail end cap
Best-in-class warranty shield over the BAKFlip MX4 panel texture

BAKFlip MX4 Hard Folding Tonneau Cover for 2016-2023 Toyota Tacoma (6'2" Bed)

$1,299.99 $1,629.99 Save $330.00
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear
Flash Sale Ends in--:--:--

Free gifts included with your order

Details
Details
Details
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
  • Guaranteed FitmentTeam-confirmed fit or money back
  • No Sales TaxZero sales tax on every order
  • 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

+1 (470) 823-2453 Email Us
Locks the moment it closes
Sealed edge to edge
Multi-layer aluminum panels
Folds to the cab, drive open Folds to the cab, drive open
One-person install
The original hard-fold cover

Features

  • Locks the moment it closes: BAK's patented auto-latch engages as each panel closes, so there is no separate locking step. BAK says the Gen 3 lock parts were re-engineered to resist forced entry better than the Gen 2. To open it, drop the tailgate and pull the release cable.
  • Sealed edge to edge: Revised EPDM rubber perimeter seals and tight-fit clamps close the gap between the cover and the bed rails, and on most trucks a dual-action tailgate seal, 13% longer than before, covers the tailgate. Drain tubes carry off water that reaches the rails. BAK's own sheet notes the cover is not airtight, so think weather-resistant, not sealed.
  • Multi-layer aluminum panels: Aluminum top panels sit over high-density polymer cores on aluminum side rails. BAK says the Gen 3 panels are 22% stronger than the original MX4, and the closed cover is rated at 400 lb, evenly distributed.
  • Folds to the cab, drive open: Fold the panels to the cab, strap the cover to the buckles at the bulkhead and drive with the bed open for tall loads. Flipped fully upright, prop rods hold it against the cab on rubber bumpers. BAK says it is the only hard fold that leaves your 3rd brake light visible in every position.
  • One-person install: Click-in clamps hold the rails to your bed rails, with no drilling on most trucks, and one person can do the job. BAK rates it at 30 minutes or less (Level 1) and says the new click-in design cuts install time by 12%.
  • The original hard-fold cover: BAK says the MX4 defined the hard-folding category and calls it America's best-selling truck bed cover. The Gen 3 version (model year 2025) sits flush with the bed rails and wears a textured matte black finish on every surface.

Description & Fitment

Own a 2016-2023 Toyota Tacoma with the 6'2" bed? This is the BAKFlip MX4 that fits it. Fold it against the cab and strap it down to drive with the bed open; BAK notes the 3rd brake light stays visible in every position. Fitting it is straightforward: adaptor rails bolt to the factory utility rails with T-nuts and the cover rails clamp on top, with drain holes drilled in the wheel wells, and BAK calls it a Level 1 job of 30 minutes or less. BAK's own brands list the box at 73.7". Revised EPDM perimeter seals and tight-fit clamps help keep weather out, and drain tubes carry off water that reaches the rails. The textured matte black cover sits flush with the bed rails and is rated at 400 lb spread evenly. BAK backs it with a 5-year limited warranty.

Fitment & Compatibility

Toyota
Years Model Bed Notes
2016-2023 Tacoma 6'2" (73.7") —

Check your bed: measure along the bed rail from the bulkhead to the inside of the closed tailgate. This part is for the 6'2" bed on the 2016-2023 Toyota Tacoma. BAK's own brands list this box at 73.7" long.

Not for: the 5'1" bed (BAKFlip MX4 448426). 2024-2026 trucks with the same bed take BAKFlip MX4 448447. 2005-2015 trucks with the same bed take BAKFlip MX4 448407.

About BAK Industries

BAK.

BAK makes hard tonneau covers. BAK bills itself as "America's #1 truck bed cover."

The range splits into BAKFlip hard folding covers (MX4, MX4 EZ-Lift, MX4 TS, G2, F1 and Fibermax) and Revolver hard roll-ups (X2, X4s and X4 TS). The MX4 is the aluminum-panel BAKFlip that BAK calls America's best-selling truck bed cover; the MX4 TS adds T-slot rails and the MX4 EZ-Lift adds a lift-assist system.

Authorized BAK dealer. Prestige Truck is an authorized BAK dealer, so what we sell is new and genuine BAK. BAK's warranty "is nontransferable and applies to the original purchaser of the BAK product only," and BAK requires warranty registration on file or proof of original purchase (a detailed, dated receipt) for warranty service. Your Prestige Truck order receipt is that proof.

Frequently Asked Questions

Will this fit my 2016-2023 Tacoma?

Yes, if it has the 6'2" bed. Measured along the floor, that box is about 73.7". Measure along the bed rail from the bulkhead to the closed tailgate, and note it is not for the 5'1" bed (BAKFlip MX4 448426). If you are unsure, send us your VIN and we will confirm.

My truck is right at a model-year change. Which one do I need?

This part covers the 2016-2023 Toyota Tacoma. 2024-2026 trucks with the same bed take BAKFlip MX4 448447. 2005-2015 trucks with the same bed take BAKFlip MX4 448407. Go by your truck's model year, or send us your VIN.

What changed with the Gen 3 MX4?

BAK lists stronger panels (high-density polymer cores, 22% stronger than the original MX4), re-engineered lock parts that resist forced entry better than the Gen 2, revised EPDM perimeter seals and tight-fit clamps, a dual-action tailgate seal 13% longer than before, re-engineered prop rod clips, and a click-in design that it says cuts install time by 12%.

Will it keep rain and snow out of the bed?

It is built to: edge-to-edge seals and tight-fit clamps close the gap to the bed rails, and drain tubes carry off water that reaches the rails. BAK's own install sheet says the cover is not airtight, so plan on weather-resistant rather than sealed. Clear snow and ice off before you open it; that is a warranty condition too.

How much weight can it hold?

BAK rates the closed cover at 400 lb, evenly distributed. BAK's sheet also says not to drive with objects on top of the cover or tie cargo to it.

Can I drive with it folded open?

Yes. Fold it toward the cab and attach the straps to the buckles at the bulkhead, pulled snug, and you can drive with the bed open. The cover must be secured at all points while the truck is moving; that is a condition of the warranty.

Installation

Install time 30 minutes or less (BAK's figure)
DifficultyLevel 1simple installation; one person
TypeBolts to the factory utility rails with T-nuts and adaptor railsdrain tubes need a drilled hole
Tools
  • a 1/2" wrench or socket and a Phillips screwdriver
  • plus scissors or a utility knife, isopropyl alcohol, 5/8" drill bit and drill, T-30 Torx driver, 3/8"-drive short extension and ratchet

Here's the short version. Follow BAK's install sheet (below) for your truck's exact clamp positions and settings.

  1. Seal the cab header. Remove the factory cab header (five fasteners under the rear window) with a T-30 Torx driver, a short 3/8" extension and a ratchet. Clean both ends with isopropyl alcohol, stick the foam seals on the header end caps, and refit it with the bolts torqued to 7.5 Nm (66.5 in-lb).
  2. Fit the adaptor rails. Remove the utility-rail end caps, slide three T-nut kits into each utility rail and refit the caps. Bolt each adaptor rail to the T-nuts with the kit's bolt, washer and lock washer, using the round holes, not the slots, and push it toward the cab; then tighten while pressing the rail down.
  3. Clamp the side rails and route the drains. Set each side rail on its adaptor rail, pushed to the cab, and clamp them together: the back of each clamp goes through the upper slot in the adaptor rail (or beside its tabs if it won't fit) and the front onto the side rail. Keep the rails level with the bed cap and tighten to 10 ft-lb with a 1/2" wrench or socket. Fit the drain tubes and run them through a 5/8" hole drilled in the top corner of each wheel well, checking underneath first.
  4. Prep the cover. Slide the two cover retainer clamps into the track under the cab end of the cover, one per side. Peel the liner off each gasket, stick it under a buckle end, and screw the two buckle ends into the pre-drilled holes on the front header panel with the screws and nutserts. Hand-tighten only; don't use a screw gun.
  5. Set the cover in place. Lay the folded cover on the side rails at the cab end, centered between them, and turn the retainer clamps clockwise until the lock washer is snug. With the cover still folded, clean the spots for the cab bumpers with soap and water, then isopropyl alcohol, let them dry and stick the bumpers along the top edge where the cover meets the cab.
  6. Unfold, adjust and check. Unfold the cover toward the tailgate and center every panel side to side and front to back; the rear edge and tailgate seal rest on top of the tailgate with a 1/2" overlap. With a power tailgate, make sure it still works with the cover closed. Release each latch to check it engages the rails (the sheet shows how to adjust a slam latch), then re-tighten the retainer clamps. BAK's warranty asks you to re-check every clamp after your first week of driving.

Stuck on a step? Ask our install experts

What's included
  • Hard fold cover
  • Driver side rail
  • Passenger side rail
  • Adaptor rail driver side
  • Adaptor rail passenger side
  • 2 cover retainer clamps
  • 6 clamps
  • 2 buckle ends
  • 2 gaskets
  • 4 screws
  • 4 nutserts
  • 6 T-nut kits (5/16" flat washer, 5/16" lock washer, hex head bolt)
  • 2 bulkhead gaskets
  • 3 D-shaped cab bumpers
  • 2 drain tubes

Specifications

BrandBAK
Part Number448427
Cover TypeHard folding
GenerationGen 3 (model year 2025)
Top PanelsAluminum over a high-density polymer core
Side RailsAluminum
FinishTextured matte black
Load Capacity400 lb, evenly distributed
LockingPatented automatic latching
SealsEPDM perimeter seals; dual-action tailgate seal on most trucks
DrainageIntegrated drain system with drain tubes
Bed Access100% when folded against the cab
3rd Brake LightVisible in every position
MountingClamp-on, no drilling on most trucks
Warranty5-year limited
Fits2016-2023 Toyota Tacoma
Bed Length6'2" (73.7")
UPC819275042499

Warranty, shipping & returns

  • 5-year limited warranty

    BAK covers the BAKFlip MX4 against defects in materials or workmanship for five (5) years from the original date of purchase.
    • A defective cover or hardware component is repaired or replaced, at BAK's option; BAK may substitute a newer model with similar form and function.
    • It covers the original purchaser only and is not transferable. Warranty registration must be on file, or keep a detailed, dated receipt as proof of purchase; contact us for help with registration or a claim.
    • To keep it valid: clean with mild automotive soap and water only; keep the cover secured at all points while driving; check all clamps and retention parts for tightness after a week of driving after installation (or reinstallation) and now and then after that; clear snow, ice and anything else off before opening; never tow the truck from the rear with the cover on (remove and store it first).
    • Claims: get a Return Material Authorization (RMA) number from BAK before returning anything. BAK may ask for the part back postage prepaid, and shipping charges apply to a repair or replacement. A claim needs your order number, contact details, vehicle, part number, a description, the receipt and photos.
    • Not covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that is not a defect in material or workmanship. BAK does not accept returns of non-defective products once installed.

  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Order by 5 PM ET on a business day and it starts processing the same day.
    • This cover is an oversized item, so it ships by freight or as an oversized parcel.
    • Most orders arrive within 1-5 business days.
    • We email your tracking number as soon as it ships.

  • Inspect on delivery

    This cover ships in a long, heavy box. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.

  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.

What our customers say

4.6 · 5025 reviews

Photos from owners

+165
David G. Verified
07/11/2025

Definitely a great choice

From start to finish, this was a great choice. Customer Service helped me pick the best fit for my Tacoma. I’m not the most Mechanical, install probably took me a little longer than most, but it was fairly straight forward. Love the look!

CHRIS M. Verified
09/23/2026

The best around!

This is our 5th truck in the family and 5th Bakflip. Truly made right -quality, classy and convenient!

Robin A. Verified
09/15/2026

BAKFlip MX$ Tonneau Cover

After looking at many other products and talking with various truck owners, hands down this was the best product buy. Easy to install, great look, hardy and so easy to use. No loss of bed space. I love it!

David J. Verified
08/30/2026

This truck hard bed cover

This truck hard bed cover is a great product. Have not had an issue with it yet. I give it an A+.

Bill
07/01/2026

BAKFlip MX4 Tonneau Cover

This is my forth BAKFlip MX4 Tonneau Cover, I keep going with the BAKFlip MX4 because it is well built and a good design that works. Installing the BAKFlip MX4 is quick and easy, takes about an hour and with the Tacoma you keep the adjustable tie down rails. This is a low profile tonneau cover and it looks like it was factory installed the design is so well thought out.

Arthur C. Verified
08/25/2026

Pleased with purchase

Fit was perfect and easy to install. Videos helped.

JEREMY Verified
06/08/2026

Backflip

To be honest I’m glad I went with this versus the gator I have a few friends that has the gator and this seem to be extremely easy install just throw the instructions in the garbage can because they’re useless watch a YouTube video and with a Phillips screwdriver it took about one hour and a half to install it it works flawless. I’m glad I spent the extra few bucks for it and it was delivered extremely fast that’s why I keep using this place !

Wendy T. Verified
06/01/2026

The bed cover is very

The bed cover is very nice and keeps my stuf dry and safe !

Brian B. Verified
08/11/2026

Latch broke in less than a month

Latch broke in less than a month How do I get support? I have pictures of the latch which pulled out of the cover

Willis Verified
05/25/2026

Encore performance.

This is my second BAKFlip cover. Love everything about it.

William
06/24/2026

BAKFlip MX4 Tonneau Toyota Tacoma 6' Bed

This is my forth BAKFlip MX4 Tonneau that I have had on different trucks. The MX4 is a good cover that sits flush with the top of the bed rails. The Toyota Tacoma version reuses the adjustable tie down rails by moving then about 1 1/2 inches lower so you keep that feature. Installing takes about an hour by yourself and it is pretty strait forward. Just do things in an order so you don't mix up anything. The MX4 is a good looking tonneau cover. For my money the BAKFlip MX4 is the best tonneau cover for the money, yes it is one of the more expensive ones but the quality is very good.

Rusty A. Verified
04/28/2026

Couldn’t be happier

For the past 6-7 years, I had a soft, tri-fold tonneau cover on my truck bed. I had been wanting to upgrade to the Bak Flip some time ago but just never pulled the trigger. I recently bought a new truck and decided that now was the time. The install took a tad longer than advertised, but that’s only because the drain holes and tube in the front were larger than the holes already located in the bed of my truck. So, I just ran to Lowe’s and got the right size tubing. It is critical that you get the cover aligned properly or it won’t close right. But, now that I have that done, it closes perfectly every time. Streamlined look, sturdy and my bed (and stuff in it) stays dry.

Mitch F. Verified
01/05/2026

Good Cover

The cover does its job. Was easy to install and is as advertised. Would have been a much better experience if all the parts were included with the cover when delivered. Took over 2 weeks to receive the missing parts.

Scott B. Verified
11/20/2025

Love it

Had to go with folding on my 6. 5 foot bed. Previously had a rolling cover on my 5. 5 foot beds. Very happy with the change. Look great. Very low profile.

Daniel Verified
11/09/2025

The product looks good and

The product looks good and the directions for installation were relatively easy to understand. The truck does look cleaner now.

Brian H.
06/17/2025

Awesome product

Fast installation simple to use and super good quality

Paul M. Verified
08/25/2025

BAKFlip MX4

This cover is a good choice for someone who only wants to invest in a tonneau once. It is sturdy and well made. It provides good access to whatever is in the truck bed. Installation was straightforward and fairly easy. Would buy this again but probably won't have to.

Yarin R. Verified
09/05/2026

Cover , no strong.

Fit perfect, the issue I have is when you are folding and keep open the cover, the air kick back the cover, it is not strong enough to hold, should be better quality for the price I pay, looks good but I was disappointed that did not function as needs to be.

Carlton C. Verified
06/26/2025

Have one complaint.

Printed instructions would have been nice.

Dion R. Verified
06/23/2025

BAKFlip MX4 Hard Folding Tonneau Cover

The cover is good quality and looks amazing! I bought the same model for my Chevy- and now that I went with a Ford, I just needed to buy another one.

Jay R. Verified
01/02/2025

Bed cover

It’s expensive. But you get what you pay for.

Angad
08/10/2026

Great quality and customer service

So happy with my purchase!

Russell M. Verified
10/19/2024

Great product, better company

Great product. The first unit they sent had a small manufacturing defect. I contacted support and they sent me a prepaid shipping label. I had the second unit at my house in under a week. Great customer service. I will shop here again.

Martin Q. Verified
09/17/2024

Backflip MX4

Great cover. Easy to read instructions which made it easy to install. My Tacoma looks great with the cover.

Jerry S. Verified
08/05/2024

Tonneau Cover BAKFlip MX4

It took a while to get the Tonneau Cover for my 2024 Tacoma, but it was worth the wait. Perfect fit, easy to install, and it keeps the cargo dry and safe.

Frank S. Verified
06/18/2024

Cover

The cover was exactly what I was looking for. Perfect fit and low profile. The best thing is that there was a small piece on interior latch a little damaged and the customer service team took awesome care of it by sending me a new cover which I just swapped pieces and returned. Thanks

Carlos P.
01/29/2025

Love’n my tonneau cover

Hands down the best purchase I’ve made for my Tacoma.

William E. Verified
05/20/2024

Great product! Great service! Great price!!

This is my 5th backflip Tonneau cover. First time I did the install. The install was straightforward and instructions were easy to follow. It took me about two hours, but I was in no hurry and did it myself. I have one piece of feedback. Two of the bump stops that were applied to the Tonneau we applied over manufacturing stickers. Once the manufacturing stickers got warm, they started to release from the Tonneau cover, So where the bump stops overlapped they started to release as well. It was an easy fix with some adhesive, but I recommend a different location for the manufacturing stickers so the bumps aren’t attached/glued over the top of them.

Clark K. Verified
04/20/2024

Mx4

Great cover. Clean looking. Install was a little slower than I expected but it was worth it!

Cameron J. Verified
07/16/2026

Leaks too much for price

The cover looks beautiful. Install was easy. But near the front of the bed on the right side water has a consistent drip during a med-high rain. If I was to know this leaked this much I would have bought a cheaper alternative. This review does not allow for media but I would post if I could.

JOHNNY O. Verified
03/19/2024

Bakflip

Awesome product. Easily installed.

Brian S. Verified
02/11/2024

Love the BakFlip

This is my third BakFlip. Love them great fit, looks great protect my stuff.!

ItsJustMe
01/10/2026

Cover looks nice, install is a bit tricky

The tonneau cover is a nice fit and looks good. The build is solid with the aluminum panels. It folds and secures nicely. I don't know if this is normal, but to snap the last cover panel in place, I have to have the tailgate down, snap it in place and then lift the tailgate. Not a big deal, but it did cause a bit of trouble during install in my short garage where I couldn't lay the tailgate down. I did find that the proper fitting took some tweaking to get things lined up properly down the length of the bed and the installed rails to secure it with. The instructions were mostly clear but a couple of the steps were vague here and there because the instructions are pretty generic. I was missing one small piece (small plastic end cap) for one of the rails. It took them shipping 3 different times and 4 different parts (never did get the right part) to get a part I could modify to make it…

Chris G. Verified
01/05/2024

Epic start to finish

Stop shopping Buy here save your self the time and inconvenience the best around call today or email for access to your truck parts Great staff incredible products Excellent value Fast easy installation

David E. Verified
09/14/2026

Nice Tonneau Cover

I purchased the BAKFlip MX4 Gen 3 cover for my 2019 Tacoma TDR Sport with a 6' bed. Installation was pretty straightforward and easy. My only criticism is in the way the tonneau cover hardware tracks bolt to the Toyota factory-installed side rails. I had to shim the tracks from the back side to keep the latch receiving rail level, versus pitching down slightly, or the plunger on the latch would not grab the rail properly to lock the cover down. The cover is weather tight, except for some edges near the tailgate, but that's not a big issue as water drains at the tailgate anyway. The cover looks great and performs well. I would recommend it.

Chase S. Verified
03/09/2026

4/5

The bed cover serves the purpose and installation was as advertised. I was disappointed in the rear corners near the tailgate. They seem too soft and turn down. Also, the rubber bumpers on the front of the cover (used then folded against the cab) don’t stick good. The adhesive was poor quality on mine.

Scott H. Verified
04/08/2025

BAKFlip HX4

Overall, this cover is great, however there are some fit and finish issues for my vehicle, 2025 Tacoma (6-foot bed). For the finish, many of the foam cushions on the underside of the cover were not applied properly and were skewed. The top rubber cushions near the cab were not sticking completely to the top (still aren't). The fit is a bit off, and the instructions are off as well. For the fit the rails do not cover the adaptor rails on both sides. I assume this is a tolerance issue with the Toyota bed liner, just not enough size accounted for in the BAKFlip design to cover this tolerance. The gap allows water to enter the bed freely, see photos. The mounting of the rails to the adaptor rails cannot be performed as the instruction show, see photos. The elevation of the Toyota rail system is too low for the clamp bolts to tighten when aligned with the rail centerline, as shown in the…

Harrison
07/17/2026

Great product. Best purchase for

Great product. Best purchase for any truck. Install was extremely easy and was done in under an hour.

Michael O. Verified
09/09/2024

Good cover bad information

The cover is good quality and the install isn't bad but it took some effort to get the bed rails square and snug on the bed. I almost sent it back because I was given bad info by the sales person. He said it would take up 4" of bed space when it takes almost 10".

Jeremy W. Verified
09/09/2026

Great, but a dent on shipping

Everything was great, but the box was beat up a little. Upon opening the box, there was a small dent on the inner portion of the cover. Not big enough to return, just big enough to notice.

CONNER Verified
08/07/2026

BakFlip MX4

I’ve been wanting the BakFlip MX4 for my 17 F150 for a while and I finally broke down and bought one. It’s everything I thought it’d be. It’s has great quality, durable and can easily be installed within a couple hours by yourself, but an extra set of hands doesn’t hurt.

Dennis R. Verified
08/23/2026

I wish I bought the MX2 instead.

I had an MX 2 installed on my 2017 Tacoma in January 2017. When I recently bought a 2023 Tacoma I wanted the BakFlip for it. The MX 2 is so much easier to install and it aligns with no issues. I had to keep adjusting the rails to improve the fit. The right side of the cover did not close all the way; there was a 1/4 inch gap. Part of the problem was the rubber seal improperly installed at the factory. I managed to peel it back and adjust it as it should have been.

Jeffrey P. Verified
06/20/2026

Better then expected.

Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.

Anonymous
05/11/2026

Solid Cover

Cover works great and looks great. Easy to install and fits very snug, Only minor issue is very slight water in the bed after rain storms, but not a significant concern.

Richard A. Verified
06/04/2026

2026 Maverick cover

This is my third truck to install bak flip tri fold hard cover. Each one was improved and better than the last. My only issue was a wrong part was packed with mine so I had to call customer service to ship out the correct part. I think I have had this issue on the last two covers. Issue was always resolved in a professional and professional way but it is just an added cost to you and an extra step for the customer. You dont expect this from this price point.

Paul H. Verified
05/18/2026

Sturdy, Looks great

Replaced a soft cover with this. So far its been great. Gear is secure. Easy install.

Bob K. Verified
05/16/2026

What a waste of time

First box came without hardware. Second box came with everything but was not straight with one side being longer than the other. They kept asking me for pictures and measurements till I had enough and sent it back for a full refund. Will never buy anything from them again. The funny thing is ,this is the second time they asked me to do a review on their junk.

Jill H. Verified
10/08/2026

Perfect

Excellent product. Easy install. My boyfriend loves it.

Anonymous
04/29/2026

new

love it, was easy to install myself

William L. Verified
05/14/2026

Better Than OEM with easy install

The Ford Maverick factory options are fine but the BAKFlip is heavier duty. The installation was easy and took an hour but I have installed one on my F350 previously. It may take a little longer for someone with no experience installing a bed cover. Instruction are easy to follow. The BAKFlip is popular so there are excellent videos of step by step instruction online. An advantage of the BAKFlip is it is more secure than a regular cover. It’s going to be hard for someone to break into my bed and steal anything.

Michael F. Verified
05/09/2026

2026 F350 6. 5

Love the new design. Light weight and excellent quality and design. Easy to install with minimal tool required and the looks are amazing. Super sleek.

Gregory D. Verified
10/08/2026

Great look

It installed easily, look great, and functions good.

Duane Verified
05/07/2026

Tonneau cover looks great and

Tonneau cover looks great and was very easy to install. It’s very easy to fold open and gives full access to the whole bed.

Albert P. Verified
05/16/2026

Expected a bit more for the price

First, watched the online video instructions for my year mode and make prior to starting. Small item, but 1/8" shims shown in the video were not included with my purchase. Second, both rubber bumpers that support the cover when in the folded position became unattached after 6 weeks without ever having the cover in the folded position. Third, both struts that are used to lock the cover in the folded open position are constantly vibrated from their holders and then hang down getting entangled in what ever cargo is being carried. Just a matter of time before they are broken off.

Anonymous
04/13/2026

My first Tonneau Cover

I've never tried a tonneau cover before, but was impressed when 2 of my friends both showed up with a Bakflip cover. Easy to install in less than an hour, very durable and easy to flip up and secure for hauling trailers on a goose neck hitch.

Michael R. Verified
05/06/2026

Awesome Cover

This BAKFlip is the best cover Ive had on any of my trucks by far. Easily installed and gives the truck a nice clean look. Dont hesitate buy one today!

Sidney C. Verified
10/08/2026

BAKFlip Excellence

I have purchased the BAKFlip MX-4 for 2 prior pickups and have been very pleased with the appearance, fit, materials, and workmanship. Thank you.

Kenneth Verified
04/28/2026

BAKFlip MX4 Tonneau Cover

I’m very pleased with the fit, finish and ease of installation. A couple of pieces were damaged in shipping and customer service replaced them quickly. The only improvement that I can suggest is a heavier duty box to ship it in.

Joel J. Verified
04/26/2026

BAKFlip Max4

Very easy install. Fits great and looks good also.

Anonymous
03/19/2026

Looks great! Very happy with this cover!

I might not be able to pronounce tonneau but I'm very happy with this cover! The install was a little bit harder than I expected but the good included instructions and online videos made it very do-able. I recommend this strong and good-looking cover!

James R. Verified
10/08/2026

Topper

Got the cover quickly. Install was pretty easy but I did read and watch videos before install. My 11 year old grandson, he did most of the work inside the truck bed, and my son assisted. So you know it was a straight forward install. Love the topper.

charles f. Verified
04/24/2026

It leaks

Was initially impressed with the bed cover. Appearance is great, installation was easy. But after a rain, water pools in the middle of the cover and begins to leak in the middle of the bed. Ive had numerous bed covers (roll up/soft trifold/hard trifold) and they all leak and I understand that it is unavoidable. However, other bed covers have leaked towards the cab or at the tailgate. This one leaks right in the middle of the bed. For the price I cannot and would not recommend this cover to friends/family.

Douglas B. Verified
04/20/2026

Best Value Tonneau Cover

Easy installation and very versatile tri-folding Tonneau Cover. Removes easily. Aesthetically appealing. Highly recommend.

Larry C. Verified
04/17/2026

Great Fit and Look

Excellent customer service and easy on line ordering. Packaged well and received with no damage. Easy install. Very pleased with look.

Ralph
03/03/2026

fit great,easy to put on,would

fit great,easy to put on,would buy again

Kristen W. Verified
08/21/2026

Poor quality

The first backflip we received had a divet in the panel. They sent us a new panel that had the corner cover damaged and the screw pulled out. It was for a Long bed truck and it didn’t come with full length solid rails we had to add the extra 2’ which wasn’t easy and was annoying. Since we have been using it for over a month, 4-5 of the protective foam pieces have come loose and fallen off and we have tried to put some back on but they keep falling off. Overall this seems like a very low quality truck bed cover with components that can’t hold up to hardly any use or the outdoor elements. Very disappointed in this product.

Reginald S. Verified
04/14/2026

The Best Truck Bed Cover Yet!

In 2015, I bought my first BakFlip and transferred it to my second Ram 1500. Here in 2026, I bought my third Ram and decided to get the new BakFlip design and am glad I did. Very easy to install and it took me less than 30 minutes. I love the finished look - like it's from the Ram factory. I like that the folded panels are really secured in place when driving and won't get whipped in the wind plus it leaves room for maximum cargo space. The upgraded cable system for latching and unlatching is another big plus. They really designed a great product and I recommend it over all the others out there. . . well worth the money!

Dennis M. Verified
03/30/2026

BAKFlip tonneau

Love it, easy install, great cover!

Lee A. Verified
03/05/2026

Solid

Everything I expected it to be. Same as GMs only less $. I rated medium on value because Im cheap :-). Seriously though, it was easy to install. I did it solo in about 45 min. Followed YouTube instructions from a guy that took the time to video his install. Got to love YouTube. Looks sharp. Has performed as expected. Zero issues. If you have a Sierra EV, get this cover.

Steve K. Verified
10/08/2026

Great tonneau cover

Great tonneau cover for the money.

Anonymous
02/20/2026

Strong and Easy to Install

Installation was easy and took less than an hour.

Ricky B. Verified
02/19/2026

The BAKFLIP MX4 hard folding GEN3 is great

I just love how it sits on my truck it makes it look very distinguished

Michael F. Verified
01/18/2026

Very good

Nice product super easy to install but grab a friend its much easier. Product fits the bed nicely. And the lathes made it easy to fold up. If I had one critique I wish the cover on the Cab side was convex to match the shape of the bed on my 25 raptor. Small critique would make it perfect other than that it still gets an A+ from me.

Richard M. Verified
10/08/2026

bed cover

the cover added nice look to my chevy truck

Mohamed Z. Verified
01/02/2026

Great fit

Ive been wanting a hardtop cover for months but I waiting to sell my camper shell, finally I was able to find the correct match since my truck is eight feet bed. It wasnt an easy task to find the correct one! This one looks great on my truck

Anonymous
02/03/2026

Best tonneau cover out there.

Had some issues with my order but the company was really responsive and definitely worked with me to get it squared away. Will buy again if I need another cover in the future.

Cornelius J. Verified
12/12/2025

Bakflip

Overall so far the cover is great I have no complaints a couple people I know say they have problems with theirs before so I'll just have to wait and see but for me it's great no problem

Kevin W. Verified
05/02/2026

MX4 Gen 3

I like the cover especially because it's a hard top. There still is leakage and some parts, like the seal, seem to be fragile. Mines popped off. I have to move it a little to make it lock. If I have to use my whole truck bed, it covers my whole back window. I do like the steak flush look. I like that it easily opens with the pull down. I also like the fact you can close it with the truck bed door open or closed. Overall I like it, but for the price, definitely wish there were some things that were better.

Alan L. Verified
10/07/2026

New install

Only took me an hour to install. Great looking.

Michael Verified
12/10/2025

Love the BAKFlip

Love the BAKFlip but disappointed missing bolts for the Snap to hold it while flipped up. But over all very pleased with the product.

Jeremy Verified
08/11/2026

Poor Q/A inspection

While the cover looks good the quality of parts were defective. I had to call for replacement and repair parts twice. The cable to release the lip broke due to poor workmanship. I had to replace the latch myself after only 2 weeks. This is way overpriced for having to fix it myself.

Jtmalone86
08/18/2026

Great utility, quality not as much

My wife had one of these on her 2010 nissan titan and it was perfect in every way. So when we bought a newer truck (2015 ram 2500) we wanted to get the same cover. Tonneau was shipped quickly, was packed well and had easy instructions. The fitment is perfect and the overall utility is great. I espec6like how it acts as a headache rack when fully up and out of the way. I've had this item for a year now and have had it opened and closed around 30-40 times. The wire for the section closest to the tailgate broke. Inside the latches the wire is looped and crimped on and it slid out of the crimps. So I had to buy new cable and fix it. Works like a charm now. I will say the other stock cables work well and have not broken. Other issue is the clips that hold the seal into the side of the tonneau keep popping out. They pop back in easily but it's definitely annoying and causes the seal to…

duke
09/12/2026

quiestionable longevity

I have this cover on a 2021 F250. I work in the construction industry and need to open it often. The corner pieces have fallen off and the coating doesn't hold up to medium use. The seal leak in various places. If this is something you rely on, I would consider other brands.

Logan S. Verified
11/14/2025

Looks Great but Leaks

I love the low profile look of the cover but it leaks in the corners by the cab. I even purchased some silicone putty to fill in the gaps between the bed and the cover, but it still leaks.

Alex S. Verified
08/06/2026

I am happy with the

I am happy with the product. It works well. My goal was to purchase a more heavy-duty cover, but currently it is not made for the 2026 GMC Sierra AT4 EV. If that ever changes please contact me as I most likely will be interested.

Gary C. Verified
11/13/2025

Needs Additional Latch set

Second fold from rear window needs a latch set. The joint raises and lowers after your speed reaches 70 mph and above. This can lead to water leaks at the joint. Contacted company, but would not fix problem or refund money. They said this is normal function of the cover. This problem is caused by the design of the aerodynamics of the truck with the Cab Air Deflectors. This is different from all other Chevy Trucks.

Marc C. Verified
06/07/2026

Tonneau cover is nice - but damaged inside of packing

The cover went on well but once I installed it, I noticed the clip that holds the strap for locking into place in the folded position, was broken off. I found the broken piece in the packing material. The only real fix would be to send the whole cover back and I needed it for my truck. I guess I should have looked it over more closely when I removed it from the packing.

Daron N. Verified
07/23/2026

Disappointing Quality for the Price

For the price I paid, I wouldnt buy this cover again. The biggest issue is with the long-bed rails. They come in two pieces, but only include three mounting clips. Because of this, its very difficult to get the rails properly aligned during installation, and they never seem to line up quite right. The adhesive rubber bumpers have already started coming loose after being exposed to warm weather. Lastly, the cover gets extremely hot in direct sunlight. It becomes uncomfortable to touch and makes it painful to open when needed. Overall, Im disappointed. For what this cover costs, I expected better quality and a better-designed product. Now that its installed, I feel stuck with something Im not satisfied with.

Noel M. Verified
05/07/2026

It's good, but not 100%.

It's good, but not 100%. The corners on the front have an opening where water can get in, and it's a bit hard to open.

Kristyn Verified
03/18/2026

Easy install, nice looking

This tonneau cover was even nicer looking than I thought it would be. Super streamlined and matches my Rhino Lining bedliner somehow. The only complaint is that I installed it three weeks ago and the adhesive foam strips are peeling up already. The truck is garage stored and it’s summer so it hasn’t been in the elements yet.

Garrett N. Verified
03/14/2026

2026 gmc Sierra AT4X 6. 6L diesel

I installed in myself. Took me 5 hours the only struggle I had was reconnecting fuel lines. Only thing was I wish it had the brackets from the fuel pump to where the connectors end.

David P. Verified
02/07/2026

Part Installed Incorrectly

The part that the prop connects to, was installed upside down. I cannot completely open my cover securely.

Dave B. Verified
10/09/2025

Ok

With the longer bed this cover doesn’t allow you to transport with just one fold. Any suggestions. Also, any suggestions on making it less water resistant?

Nate Verified
07/23/2026

Leaky

This is the least weather proof cover Ive ever owned, on top of that it rattles on any pot hole or bump. The only thing this cover has going for it is the appearance.

Joseph G. Verified
07/07/2025

Clamps weren't right

The clamps don't seat well against the metal behind the cap rail plastic. So, they can't hold straight when closing the cover. I contacted support and they said to send a picture and over a week later I've gotten nothing back after additional email. Pretty disappointed that something so simple couldn't be resolved quickly. I have put backing material in place until they figure it out so I can at least use it. The tailgate seal was also not seated correctly so I had to take it off and reseat it. For such an expensive product they really aren't doing the small parts well.

Danny S. Verified
09/20/2026

Too short

Love everything about the cover except that it’s too short. It barely covers the edge of the bed at the front and just touches the tailgate. Seems about two to three inches shorter than it should be so it doesn’t keep the water out at the tailgate and it’s not very secure for theft.

Andy Verified
09/09/2026

Used bed cover

The foam was glued together and bed cover looks worn and half of the parts are missing . Took it to a place for an install and they told me this is definitely a used item. Wasted a whole day!

Jerry D. Verified
07/25/2026

Not engineered well for ridgeline

very difficult to get to fit. RETURNED. Thank you for no hassle.

Danny B. Verified
07/21/2026

1 star

Product is flimsy. You can see light escaping through the cracks from the outside. Plenty of water gets inside. Side trims are always falling off rail. Always looks dirty or faded. Side stands don’t hold up box correctly.

Dale T. Verified
06/23/2026

Hard folding

I am very unhappy with the fit. It does not allow the tail gate of my 2026 Nissan frontier to properly close. I have to position it further forward on the bed to make it work. I would not recommend this cover or the company.

Jeff S. Verified
06/16/2026

Be aware of damage and no customer support

Damaged bed cover and no help from customer servic

James I. Verified
05/16/2026

Will not fit 2025 Nissan Frontier Pro X

I like the appearance and a parent quality of the product, but it would not work on a 25 Nissan frontier the rear latches would not come down enough to latch so I had to return it. customer Service was very helpful and I had no issues so far still waiting on my refund.

Marie C. Verified
05/12/2026

Nope

It looks unfinished. The rubber molding on the sides creased up were it folds. I gave it some time n the heat to see if it would flatten and it didn’t. The corners by the cab looked unfinished. The installation of the rails was horrible, yes I did it right, and it still didn’t close and lock wo slamming it or lifting on the side rails get it to lock. For the amount of money it cost I expect much better. So I returned mine and went with another brand from another company. And am very happy now. No rubber flap edges. Easy install and locks every time. Yes: the return process was fast and easy, but I’m rating the product.

Dan C. Verified
05/11/2026

Bakflip MX4 Ram truck w/rambox

I’m very disappointed with this product. It leaks at both the front and rear, which defeats the whole purpose of having a bed cover/top in the first place. The instructions were also a major issue. I have a Ram with the RamBox bed, but the instructions provided were for a Chevy 1500. The installation is not the same, and it made the process much more frustrating than it needed to be. Had I known the product would not seal properly and that the correct truck-specific instructions would not be included, I would have chosen a different top. At this point, I honestly wish I could return it.

Ernest S. Verified
05/07/2026

Substandard Cover

After making several adjustments to maintain the cover from dismantling, I reached out to customer service but have yet to receive a call.

Jeffrey S. Verified
07/21/2026

Leaks everywhere

If you want a cover that does not leak look somewhere else. It has been installed correctly and it's still does not prevent water from entering the bed. . after a good rain the bed as water in it do not keep anything that is valuable in your bed.

Chad M.
08/29/2026

Backflip MX4 Bed cover honest feedback

First of all, I don’t like to bring bad news, that being said, here it goes. Last year 2022 in may, I received my first MX4, it looked great! I had little trouble with installing it, about 30 mins I’d say. My issue is with the overall durability or thickness the bad cover aluminum, it dents so easily. One hailstorm and it looked like a golf ball. Ugh, that was just having it for a few months. The company was receptive to my concern, and sent me a “fiberglass” one to hopefully correct the issue. The next light hailstorm and it was another golf ball. I’m not sure if they sent me another aluminum one by mistake, or their fiberglass dents vs. cracks? It’s just a lot of money to ruin the look of your otherwise tough looking truck. Sorry Bakflip, you even tried to make it right by sending me another one, and still failed. Makes me feel a little sick.

RichieT
07/07/2026

Good but not perfect

Looks good, I like that it folds all the way for full bed access. One of the bumpers for when it is fully open blew off. Still leaks water inside. Could probably use to be made a little longer for more coverage over the tail gate. I was expecting better for the money I paid for this thing. I have a cheaper one on a different truck that leaks about the same. I going to try some extra gasket in places and hope for the best.

Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question