Tony V.
Verified
11/16/2025
Great cover
The cover was easy to install and looks custom on my truck
BAKFlip MX4 Hard Folding Tonneau Cover for 2017-2026 Ford F-250 / F-350 / F-450 Super Duty (8' Bed)
$1,299.99
Regular price
$1,629.99
Save $330.00
Verify fitment with your vehicle
GO
Clear
Free gifts included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
See it on a truck
Locks the moment it closes
Sealed edge to edge
Multi-layer aluminum panels
Folds to the cab, drive open
One-person install
The original hard-fold cover
Features
- Locks the moment it closes: BAK's patented auto-latch engages as each panel closes, so there is no separate locking step. BAK says the Gen 3 lock parts were re-engineered to resist forced entry better than the Gen 2. To open it, drop the tailgate and pull the release cable.
- Sealed edge to edge: Revised EPDM rubber perimeter seals and tight-fit clamps close the gap between the cover and the bed rails, and on most trucks a dual-action tailgate seal, 13% longer than before, covers the tailgate. Drain tubes carry off water that reaches the rails. BAK's own sheet notes the cover is not airtight, so think weather-resistant, not sealed.
- Multi-layer aluminum panels: Aluminum top panels sit over high-density polymer cores on aluminum side rails. BAK says the Gen 3 panels are 22% stronger than the original MX4, and the closed cover is rated at 400 lb, evenly distributed.
- Folds to the cab, drive open: Fold the panels to the cab, strap the cover to the buckles at the bulkhead and drive with the bed open for tall loads. Flipped fully upright, prop rods hold it against the cab on rubber bumpers. BAK says it is the only hard fold that leaves your 3rd brake light visible in every position.
- One-person install: Click-in clamps hold the rails to your bed rails, with no drilling on most trucks, and one person can do the job. BAK rates it at 30 minutes or less (Level 1) and says the new click-in design cuts install time by 12%.
- The original hard-fold cover: BAK says the MX4 defined the hard-folding category and calls it America's best-selling truck bed cover. The Gen 3 version (model year 2025) sits flush with the bed rails and wears a textured matte black finish on every surface.
Description & Fitment
This BAKFlip MX4 is made for the 2017-2027 Ford F-250 / F-350 / F-450 Super Duty with the 8' bed. The textured matte black cover sits flush with the bed rails and is rated at 400 lb spread evenly. Fitting it is straightforward: its two-piece rails join with couplers to span the 8' bed and clamp on with no drilling, and BAK calls it a Level 1 job of 30 minutes or less. For reference, the box is about 98.1" long. Fold it against the cab and strap it down to drive with the bed open; BAK notes the 3rd brake light stays visible in every position. Re-engineered prop rod clips hold it upright against the cab, and rubber bumpers protect the cab paint. BAK's 5-year limited warranty covers it from the original purchase date.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2017-2027 | F-250 Super Duty | 8' (98.1") | — |
| 2017-2027 | F-350 Super Duty | 8' (98.1") | — |
| 2017-2027 | F-450 Super Duty | 8' (98.1") | — |
Check your bed: measure along the bed rail from the bulkhead to the inside of the closed tailgate. This part is for the 8' bed on the 2017-2027 Ford F-250 / F-350 / F-450 Super Duty. BAK's own brands list this box at 98.1" long.
Not for: the 6'9" bed (BAKFlip MX4 448330). 2008-2016 trucks with the same bed take BAKFlip MX4 448311.
About BAK Industries
BAK.
BAK makes hard tonneau covers. BAK bills itself as "America's #1 truck bed cover."
The range splits into BAKFlip hard folding covers (MX4, MX4 EZ-Lift, MX4 TS, G2, F1 and Fibermax) and Revolver hard roll-ups (X2, X4s and X4 TS). The MX4 is the aluminum-panel BAKFlip that BAK calls America's best-selling truck bed cover; the MX4 TS adds T-slot rails and the MX4 EZ-Lift adds a lift-assist system.
Authorized BAK dealer. Prestige Truck is an authorized BAK dealer, so what we sell is new and genuine BAK. BAK's warranty "is nontransferable and applies to the original purchaser of the BAK product only," and BAK requires warranty registration on file or proof of original purchase (a detailed, dated receipt) for warranty service. Your Prestige Truck order receipt is that proof.
Frequently Asked Questions
Will this fit my 2017-2027 F-250/F-350/F-450?
Yes, if it has the 8' bed. Measured along the floor, that box is about 98.1". Measure along the bed rail from the bulkhead to the closed tailgate, and note it is not for the 6'9" bed (BAKFlip MX4 448330). If you are unsure, send us your VIN and we will confirm.
My truck is right at a model-year change. Which one do I need?
This part covers the 2017-2027 Ford F-250 / F-350 / F-450 Super Duty. 2008-2016 trucks with the same bed take BAKFlip MX4 448311. Go by your truck's model year, or send us your VIN.
What changed with the Gen 3 MX4?
BAK lists stronger panels (high-density polymer cores, 22% stronger than the original MX4), re-engineered lock parts that resist forced entry better than the Gen 2, revised EPDM perimeter seals and tight-fit clamps, a dual-action tailgate seal 13% longer than before, re-engineered prop rod clips, and a click-in design that it says cuts install time by 12%.
Will it keep rain and snow out of the bed?
It is built to: edge-to-edge seals and tight-fit clamps close the gap to the bed rails, and drain tubes carry off water that reaches the rails. BAK's own install sheet says the cover is not airtight, so plan on weather-resistant rather than sealed. Clear snow and ice off before you open it; that is a warranty condition too.
How much weight can it hold?
BAK rates the closed cover at 400 lb, evenly distributed. BAK's sheet also says not to drive with objects on top of the cover or tie cargo to it.
Can I drive with it folded open?
Yes. Fold it toward the cab and attach the straps to the buckles at the bulkhead, pulled snug, and you can drive with the bed open. The cover must be secured at all points while the truck is moving; that is a condition of the warranty.
Installation
Install time
30 minutes or less (BAK's figure)
DifficultyLevel 1simple installation; one person
TypeClamp-on, no drilling on most trucks
Toolsa 1/2" wrench or socket and a Phillips screwdriverplus scissors or a utility knife, isopropyl alcohol and 5/8" drill bit and drill
Here's the short version. Follow BAK's install sheet (below) for your truck's exact clamp positions and settings.
- Seal the bulkhead. Clean the top of the bulkhead with soap and water, then isopropyl alcohol, and let it dry. Stick the included bulkhead seal from one edge of the bulkhead to the other and trim the excess. With a drop-in bed liner, the seal isn't needed.
- Join the rail sections. Assemble both rail couplers with their screws and lock washers, slide a coupler into the end of each side rail, snap a rail connector onto the tail end of the rail over the seal, then slide the rail extender on and push it into the connector. Tighten the coupler screws on both sections with a Phillips screwdriver. No cutting of the cover seal is needed.
- Set and clamp the rails. Add the filler strips if your kit has them and fit the drain tubes, then set each rail on the bed rail, drain end at the cab, pushed forward and square to the bed. Attach four clamps per side, with the third clamp close to where the two rail sections join. Keep the rails level with the bed cap and tighten to 10 ft-lb (14 Nm) with a 1/2" wrench or socket. Don't over-tighten.
- Prep the cover. Slide the two cover retainer clamps into the track under the cab end of the cover, one per side. Peel the liner off each gasket, stick it under a buckle end, and screw the two buckle ends into the pre-drilled holes on the front header panel with the screws and nutserts. Hand-tighten only; don't use a screw gun.
- Set the cover in place. Lay the folded cover on the side rails at the cab end, centered between them, and turn the retainer clamps clockwise until the lock washer is snug. With the cover still folded, clean the spots for the cab bumpers with soap and water, then isopropyl alcohol, let them dry and stick the bumpers along the top edge where the cover meets the cab.
- Unfold, adjust and check. Unfold the cover toward the tailgate and center every panel side to side and front to back; the rear edge and tailgate seal rest on top of the tailgate with a 1/2" overlap. With a power tailgate, make sure it still works with the cover closed. Release each latch to check it engages the rails (the sheet shows how to adjust a slam latch), then re-tighten the retainer clamps. BAK's warranty asks you to re-check every clamp after your first week of driving.
Stuck on a step?
What's included
- Hard fold cover
- Driver side rail
- Passenger side rail
- Driver side rail extender
- Passenger side rail extender
- Bulkhead seal (on select trucks)
- 2 cover retainer clamps
- 8 clamps
- 2 buckle ends
- 2 gaskets
- 4 screws
- 4 nutserts
- 8 rubber filler strips (on select trucks)
- 3 D-shaped cab bumpers
- 2 rail connectors
- 2 rail couplers
- 8 lock washers
- 8 screws
- 2 drain tubes
Specifications
| Brand | BAK |
|---|---|
| Part Number | 448331 |
| Cover Type | Hard folding |
| Generation | Gen 3 (model year 2025) |
| Top Panels | Aluminum over a high-density polymer core |
| Side Rails | Aluminum |
| Finish | Textured matte black |
| Load Capacity | 400 lb, evenly distributed |
| Locking | Patented automatic latching |
| Seals | EPDM perimeter seals; dual-action tailgate seal on most trucks |
| Drainage | Integrated drain system with drain tubes |
| Bed Access | 100% when folded against the cab |
| 3rd Brake Light | Visible in every position |
| Mounting | Clamp-on, no drilling on most trucks |
| Warranty | 5-year limited |
| Fits | 2017-2027 Ford F-250 / F-350 / F-450 Super Duty |
| Bed Length | 8' (98.1") |
| UPC | 819275042390 |
Warranty, shipping & returns
-
5-year limited warranty
BAK covers the BAKFlip MX4 against defects in materials or workmanship for five (5) years from the original date of purchase.- A defective cover or hardware component is repaired or replaced, at BAK's option; BAK may substitute a newer model with similar form and function.
- It covers the original purchaser only and is not transferable. Warranty registration must be on file, or keep a detailed, dated receipt as proof of purchase; contact us for help with registration or a claim.
- To keep it valid: clean with mild automotive soap and water only; keep the cover secured at all points while driving; check all clamps and retention parts for tightness after a week of driving after installation (or reinstallation) and now and then after that; clear snow, ice and anything else off before opening; never tow the truck from the rear with the cover on (remove and store it first).
- Claims: get a Return Material Authorization (RMA) number from BAK before returning anything. BAK may ask for the part back postage prepaid, and shipping charges apply to a repair or replacement. A claim needs your order number, contact details, vehicle, part number, a description, the receipt and photos.
- Not covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that is not a defect in material or workmanship. BAK does not accept returns of non-defective products once installed.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- This cover is an oversized item, so it ships by freight or as an oversized parcel.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
This cover ships in a long, heavy box. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.
What our customers say
4.6 · 5025 reviews
Photos from owners
+154
David G.
Verified
01/20/2025
Bakflip MX4
It looks great. Solid construction. Easy to install. Can open and close easily as well. The open up all the way feature is great. The weather strip came off the second day so I called and they suggested sticking it to the cover itself and not the spray on bed liner. A new strip is on the way. Other than that and being a bit pricey,, it’s very very good. Also, getting 4. 3 miles a gallon better with it ion and closed.
Linda H.
Verified
09/24/2026
Easy to Install
The cover is easy to install and easy to flip back. It is awesome how you can use the entire space snd the entire thing locks.
Timothy T.
Verified
09/19/2026
Love my cover!
Fits perfect and installed easily. Looks great on my GMC AT4 and is all it’s advertised to be. I’m very happy!
Anonymous
09/18/2025
Worth the money
I absolutely love my MX4 installed on 2020 JT. Ordered directly from BF. It was shipped/delivered within a few days. It was also packaged well. It took two men to install within one hour. It looks fantastic and I get lots of compliments.
Larry D.
Verified
09/04/2026
Simply Amazing
High quality, perfect fit. Simply the best bed cover you can buy. This is my third purchase (different trucks) and I will never buy anything else.
Paul S.
Verified
07/26/2026
Ed
Installation was easy. I like that it can be closed with the tail gate up
Tyler S.
Verified
07/15/2026
Perfect!
Easy to order, easy to install, easy to open and close.
Brian B.
Verified
08/11/2026
Latch broke in less than a month
Latch broke in less than a month How do I get support? I have pictures of the latch which pulled out of the cover
D. G.
Verified
06/08/2026
26’ F250 - 100% Recommended MX4 Gen3
As advertised. Need better instructions QR code.
Emanuel Q.
10/29/2024
Bakflip MX 4
Great product, but just had concerns about the quality control. When I opened boxes everything seemed like great quality thus far, but I was concerned with the bits and pieces of shavings and material debris still in the screw holes and in between the seems. Other than that I love the cover.
Ray
Verified
04/12/2026
Backflip
This is a very nice tonneau cover! Easy install and great fit!
Kenneth B.
Verified
11/28/2025
Everything I hoped for!
I was hesitant to buy this product on line but it came with a return guarantee, so glad I did. Very sturdy, easy to install, and gives me a peace of mind knowing my things are hidden away safely.
Bikerbiz
Verified
11/22/2025
Excellent fit and finish!
I love this cover! It fits perfect, easy to instal
James H.
Verified
10/14/2025
BAKFlip
Great cover. It does let a little water in, but that is to be expected.
Anonymous
08/25/2026
Excelent product!
Great cover, looks excellent and sits below the bed line. Can't even see that its there unless you walk up to it!
Thomas F.
Verified
07/19/2025
Yup
My second one
Yarin R.
Verified
09/05/2026
Cover , no strong.
Fit perfect, the issue I have is when you are folding and keep open the cover, the air kick back the cover, it is not strong enough to hold, should be better quality for the price I pay, looks good but I was disappointed that did not function as needs to be.
Eric
Verified
07/05/2025
very nice
excellent quality, easy install, looks great on my truck.
Robert
Verified
05/22/2025
I love the BAKflip MX$
Easy to install, keeps bed fairly dry, looks great!
Richard C.
Verified
05/02/2025
Backflip MX four hard folding tonneau
Installation was very easy works and seals very well. I went through car wash. Minimal drops of water at the front by the bulkhead. I love the flat finish overall very good product. Highly recommend.
David
07/28/2026
Excellent
Easy install that was important, tight fit water resistant locks nice and looks great what more do you want couldn't be more satisfied.
Eric W.
Verified
03/31/2025
This thing is great...
I love it. Install was easy except for the boltsthe screw in from the bottom at the back of the bed. That needs two people to do. One to push down the top and the other to screw the bolt. Other than that, the install was easy and it is very fun to show off to people.
Gary K.
Verified
03/03/2025
Great Product!
A really solid cover. One person can install it with a few basic tools and some patience. The kit comes with everything you need except a ratchet and a cutting tool. Watch the installation videos on YouTube, they are very helpful. Had the cover installed for a few weeks now. No shifting and keeps the bed completely dry. Very satisfied.
Ronald N.
Verified
01/09/2025
Installation was fairly simple, second
Installation was fairly simple, second one would go fast. Had to make slight adjustments to the latches. One small broken part, but is on the way. Looks good!
John C.
Verified
12/12/2024
Great Purchase
Great quality looks good on my truck
John
07/09/2026
F350 Happy Camper
Love the new back flip. I previously used a roller Aluminum Cover from Wisconsin. What a piece of Sx/t and always had issues with it. I no longer have to mess with squaring the rails. Worrying weather I can open the cover as the lock pin bar would fall out.
Zdenek M.
Verified
10/27/2024
Great cover and easy to install
Great cover , fits well easy to install
Tom S.
Verified
09/20/2024
MX4 hard cover
Had install issues with the drivers side rail. BAK customer service handled the problem and sent the part I needed to correct the issue. Service was 5 stars!!
Cameron J.
Verified
07/16/2026
Leaks too much for price
The cover looks beautiful. Install was easy. But near the front of the bed on the right side water has a consistent drip during a med-high rain. If I was to know this leaked this much I would have bought a cheaper alternative. This review does not allow for media but I would post if I could.
Dale C.
Verified
08/10/2024
not much never received it
not much never received it yet
Garrett H.
Verified
06/28/2024
Great cover!
Excellent product! Installation was about 40 mins but mostly due to the heat outside slowing the pace. Fit very easily and after two weeks and a long road trip, still very happy with the cover.
Mitch
06/21/2026
BAKFlip MX4
Easy to install with no issues. The client ver fits snug and operates perfectly.
Mark B.
Verified
05/28/2024
Excellent Product
Easy install, great look, functions as advertised. Having it on the truck has already proved beneficial as I've been able to store cargo secure and out of sight.
Donald S.
Verified
04/29/2024
Backflip on carbon fiber
Great product nice engineering. Looks great.
Roger L.
Verified
02/19/2024
MX4 Folding Tonneau
First time having a folding tonneau cover.Works as advertised. Minor water intrusion at the tailgate edges as expected. Happy with it so far.
Dennis G.
Verified
01/07/2024
AZ livin’
Great product and super easy to install! Looks great too! The newly designed tailgate seal on the MX4 is a nice upgrade from the previous G2 one that was on my truck when I purchased it. They are a bit expensive but in my experience so far, it’s been worth it.
Anonymous
05/07/2026
Love it!
It's perfect for me. When RV is connected, it folds up nice and tight and out of the way. When RV is disconnected, the cover closes over my hitch, locking the bed. Easy to install and super easy to operate. I could have installed it by myself, but an extra pair of hands is recommended.
Gabriel M.
Verified
09/09/2026
Almost perfect fit
Had been researching these covers and finally opted to go with this one based on the reviews. Looks great and installation was easy. My only gripe is the fit. Cover needed to be one inch longer. I have 1/4 inch overlap in tail gate, and approximately 1 inch overlap up front, however, the overlap in front likely should have been doubled in order to help create a seal that prevents water from entering the bed. That thin strip of foam to create a seal that came with it is worthless. My bed has a spray-in liner as well as the factory plastic side rails. No matter what I tried, I can’t get anything to stick to the lined portion of my bed, which results in water seepage that is significant. Had the cover been 1-1 1/2 inches longer with a downward angled end that tucks down, such would easily help create a water resistant seal. As is, I have a secure cover, but anything in the bed will get…
Daniel G.
Verified
04/28/2026
Good and rugged but installation can be tricky
Bought it for my new 2026 Ford Super Duty. Still messing with it to get the alignment perfect to get all the latches to latch. I like it other than that. Heavy duty for sure.
Walter Z.
Verified
04/25/2025
Mx 4
Very nice cover, easy to install, on truck for approximately three weeks washed the truck yesterday for the first time and just found a little bit of water in the center where it must’ve dripped from my joint or pivots, but the size of a half a dollar inside the bed otherwise everything else look dry, very happy with it
Dennis R.
Verified
08/23/2026
I wish I bought the MX2 instead.
I had an MX 2 installed on my 2017 Tacoma in January 2017. When I recently bought a 2023 Tacoma I wanted the BakFlip for it. The MX 2 is so much easier to install and it aligns with no issues. I had to keep adjusting the rails to improve the fit. The right side of the cover did not close all the way; there was a 1/4 inch gap. Part of the problem was the rubber seal improperly installed at the factory. I managed to peel it back and adjust it as it should have been.
Joseph P.
Verified
09/30/2024
Bed cover
Good cover. Videos online weren’t great and directions that came with it didn’t match the videos. Plastic clips to hold the poles that stabilize the bed cover in the upright position are flimsy and snapped just putting the poles into them.
Anonymous
04/23/2026
Bakflip
It was a gift for my son he loves it
THOMAS H.
Verified
05/17/2024
Works great
It keeps everything dry and secure for now. It took me at least 3 hours to install it because the pieces are not numbered according to the instructions. Some pieces that were pre-installed had to be evaluated to know exactly what the instructions were talking about. Some rubber spacers that were stated that I would need were for a different design of bed rail than what I had. The holes drilled for secure straps had metal shavings all in them and had to be cleaned out. All in all it seems of good quality and well built.
Britt L.
Verified
01/12/2024
Great Cover
This is my second BAK Flip MX4 for a Ford truck. My original cover, purchased in 2020, was a breeze to install on my F150. It fit very well, sealed the truck bed well and looked great after nearly four years. My recent purchase of a BAKFlip MX4 for a 2023 Ford F250 does not quite fit. The support team at BAKFlip has been very helpful and they coached me through some adjustments to the install. Although the adjustments helped, the cover appears to be about an inch too short for the truck bed. I like my cover and will keep it, but I am not fully satisfied with the 2023 version of the MX4.
Jeremy W.
Verified
09/09/2026
Great, but a dent on shipping
Everything was great, but the box was beat up a little. Upon opening the box, there was a small dent on the inner portion of the cover. Not big enough to return, just big enough to notice.
Jill H.
Verified
10/08/2026
Perfect
Excellent product. Easy install. My boyfriend loves it.
Anonymous
03/26/2026
Excellent product
My cover arrived very quickly. The instructions were concise and very easy to follow. Great product.
CONNER
Verified
08/07/2026
BakFlip MX4
I’ve been wanting the BakFlip MX4 for my 17 F150 for a while and I finally broke down and bought one. It’s everything I thought it’d be. It’s has great quality, durable and can easily be installed within a couple hours by yourself, but an extra set of hands doesn’t hurt.
Jeffrey P.
Verified
06/20/2026
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
Gregory D.
Verified
10/08/2026
Great look
It installed easily, look great, and functions good.
Richard A.
Verified
06/04/2026
2026 Maverick cover
This is my third truck to install bak flip tri fold hard cover. Each one was improved and better than the last. My only issue was a wrong part was packed with mine so I had to call customer service to ship out the correct part. I think I have had this issue on the last two covers. Issue was always resolved in a professional and professional way but it is just an added cost to you and an extra step for the customer. You dont expect this from this price point.
Albert P.
Verified
05/16/2026
Expected a bit more for the price
First, watched the online video instructions for my year mode and make prior to starting. Small item, but 1/8" shims shown in the video were not included with my purchase. Second, both rubber bumpers that support the cover when in the folded position became unattached after 6 weeks without ever having the cover in the folded position. Third, both struts that are used to lock the cover in the folded open position are constantly vibrated from their holders and then hang down getting entangled in what ever cargo is being carried. Just a matter of time before they are broken off.
CoreyB
03/11/2026
Very Durable
This is my second Bakflip bedcover and the first generation was extremely heavy considering I have had shoulder replacements on both. This cover is lightweight, easy to use, looks great with the low profile appearance, and install very easily
Paul H.
Verified
05/18/2026
Sturdy, Looks great
Replaced a soft cover with this. So far its been great. Gear is secure. Easy install.
Sidney C.
Verified
10/08/2026
BAKFlip Excellence
I have purchased the BAKFlip MX-4 for 2 prior pickups and have been very pleased with the appearance, fit, materials, and workmanship. Thank you.
Bob K.
Verified
05/16/2026
What a waste of time
First box came without hardware. Second box came with everything but was not straight with one side being longer than the other. They kept asking me for pictures and measurements till I had enough and sent it back for a full refund. Will never buy anything from them again. The funny thing is ,this is the second time they asked me to do a review on their junk.
William L.
Verified
05/14/2026
Better Than OEM with easy install
The Ford Maverick factory options are fine but the BAKFlip is heavier duty. The installation was easy and took an hour but I have installed one on my F350 previously. It may take a little longer for someone with no experience installing a bed cover. Instruction are easy to follow. The BAKFlip is popular so there are excellent videos of step by step instruction online. An advantage of the BAKFlip is it is more secure than a regular cover. It’s going to be hard for someone to break into my bed and steal anything.
Anonymous
03/09/2026
👍
So far great. Easy installation. Looks good.
James R.
Verified
10/08/2026
Topper
Got the cover quickly. Install was pretty easy but I did read and watch videos before install. My 11 year old grandson, he did most of the work inside the truck bed, and my son assisted. So you know it was a straight forward install. Love the topper.
Michael F.
Verified
05/09/2026
2026 F350 6. 5
Love the new design. Light weight and excellent quality and design. Easy to install with minimal tool required and the looks are amazing. Super sleek.
Duane
Verified
05/07/2026
Tonneau cover looks great and
Tonneau cover looks great and was very easy to install. It’s very easy to fold open and gives full access to the whole bed.
Michael R.
Verified
05/06/2026
Awesome Cover
This BAKFlip is the best cover Ive had on any of my trucks by far. Easily installed and gives the truck a nice clean look. Dont hesitate buy one today!
Anonymous
02/21/2026
Awesome
Fits perfect! Easy to install! Looks Awesome
Kristen W.
Verified
08/21/2026
Poor quality
The first backflip we received had a divet in the panel. They sent us a new panel that had the corner cover damaged and the screw pulled out. It was for a Long bed truck and it didn’t come with full length solid rails we had to add the extra 2’ which wasn’t easy and was annoying. Since we have been using it for over a month, 4-5 of the protective foam pieces have come loose and fallen off and we have tried to put some back on but they keep falling off. Overall this seems like a very low quality truck bed cover with components that can’t hold up to hardly any use or the outdoor elements. Very disappointed in this product.
Kenneth
Verified
04/28/2026
BAKFlip MX4 Tonneau Cover
I’m very pleased with the fit, finish and ease of installation. A couple of pieces were damaged in shipping and customer service replaced them quickly. The only improvement that I can suggest is a heavier duty box to ship it in.
Joel J.
Verified
04/26/2026
BAKFlip Max4
Very easy install. Fits great and looks good also.
charles f.
Verified
04/24/2026
It leaks
Was initially impressed with the bed cover. Appearance is great, installation was easy. But after a rain, water pools in the middle of the cover and begins to leak in the middle of the bed. Ive had numerous bed covers (roll up/soft trifold/hard trifold) and they all leak and I understand that it is unavoidable. However, other bed covers have leaked towards the cab or at the tailgate. This one leaks right in the middle of the bed. For the price I cannot and would not recommend this cover to friends/family.
Steve K.
Verified
10/08/2026
Great tonneau cover
Great tonneau cover for the money.
Vladimir
02/04/2026
2017 Ford F-250 BAKFlip
Should have done it sooner. Love it. Easy install.
Douglas B.
Verified
04/20/2026
Best Value Tonneau Cover
Easy installation and very versatile tri-folding Tonneau Cover. Removes easily. Aesthetically appealing. Highly recommend.
Larry C.
Verified
04/17/2026
Great Fit and Look
Excellent customer service and easy on line ordering. Packaged well and received with no damage. Easy install. Very pleased with look.
Richard M.
Verified
10/08/2026
bed cover
the cover added nice look to my chevy truck
Reginald S.
Verified
04/14/2026
The Best Truck Bed Cover Yet!
In 2015, I bought my first BakFlip and transferred it to my second Ram 1500. Here in 2026, I bought my third Ram and decided to get the new BakFlip design and am glad I did. Very easy to install and it took me less than 30 minutes. I love the finished look - like it's from the Ram factory. I like that the folded panels are really secured in place when driving and won't get whipped in the wind plus it leaves room for maximum cargo space. The upgraded cable system for latching and unlatching is another big plus. They really designed a great product and I recommend it over all the others out there. . . well worth the money!
Anonymous
01/30/2026
BAKFlip MX4
Easy to install, great product
Dennis M.
Verified
03/30/2026
BAKFlip tonneau
Love it, easy install, great cover!
Kevin W.
Verified
05/02/2026
MX4 Gen 3
I like the cover especially because it's a hard top. There still is leakage and some parts, like the seal, seem to be fragile. Mines popped off. I have to move it a little to make it lock. If I have to use my whole truck bed, it covers my whole back window. I do like the steak flush look. I like that it easily opens with the pull down. I also like the fact you can close it with the truck bed door open or closed. Overall I like it, but for the price, definitely wish there were some things that were better.
Alan L.
Verified
10/07/2026
New install
Only took me an hour to install. Great looking.
Lee A.
Verified
03/05/2026
Solid
Everything I expected it to be. Same as GMs only less $. I rated medium on value because Im cheap :-). Seriously though, it was easy to install. I did it solo in about 45 min. Followed YouTube instructions from a guy that took the time to video his install. Got to love YouTube. Looks sharp. Has performed as expected. Zero issues. If you have a Sierra EV, get this cover.
Jeremy
Verified
08/11/2026
Poor Q/A inspection
While the cover looks good the quality of parts were defective. I had to call for replacement and repair parts twice. The cable to release the lip broke due to poor workmanship. I had to replace the latch myself after only 2 weeks. This is way overpriced for having to fix it myself.
Jtmalone86
08/18/2026
Great utility, quality not as much
My wife had one of these on her 2010 nissan titan and it was perfect in every way. So when we bought a newer truck (2015 ram 2500) we wanted to get the same cover. Tonneau was shipped quickly, was packed well and had easy instructions. The fitment is perfect and the overall utility is great. I espec6like how it acts as a headache rack when fully up and out of the way. I've had this item for a year now and have had it opened and closed around 30-40 times. The wire for the section closest to the tailgate broke. Inside the latches the wire is looped and crimped on and it slid out of the crimps. So I had to buy new cable and fix it. Works like a charm now. I will say the other stock cables work well and have not broken. Other issue is the clips that hold the seal into the side of the tonneau keep popping out. They pop back in easily but it's definitely annoying and causes the seal to…
duke
09/12/2026
quiestionable longevity
I have this cover on a 2021 F250. I work in the construction industry and need to open it often. The corner pieces have fallen off and the coating doesn't hold up to medium use. The seal leak in various places. If this is something you rely on, I would consider other brands.
Logan S.
Verified
11/14/2025
Looks Great but Leaks
I love the low profile look of the cover but it leaks in the corners by the cab. I even purchased some silicone putty to fill in the gaps between the bed and the cover, but it still leaks.
Alex S.
Verified
08/06/2026
I am happy with the
I am happy with the product. It works well. My goal was to purchase a more heavy-duty cover, but currently it is not made for the 2026 GMC Sierra AT4 EV. If that ever changes please contact me as I most likely will be interested.
Gary C.
Verified
11/13/2025
Needs Additional Latch set
Second fold from rear window needs a latch set. The joint raises and lowers after your speed reaches 70 mph and above. This can lead to water leaks at the joint. Contacted company, but would not fix problem or refund money. They said this is normal function of the cover. This problem is caused by the design of the aerodynamics of the truck with the Cab Air Deflectors. This is different from all other Chevy Trucks.
Daron N.
Verified
07/23/2026
Disappointing Quality for the Price
For the price I paid, I wouldnt buy this cover again. The biggest issue is with the long-bed rails. They come in two pieces, but only include three mounting clips. Because of this, its very difficult to get the rails properly aligned during installation, and they never seem to line up quite right. The adhesive rubber bumpers have already started coming loose after being exposed to warm weather. Lastly, the cover gets extremely hot in direct sunlight. It becomes uncomfortable to touch and makes it painful to open when needed. Overall, Im disappointed. For what this cover costs, I expected better quality and a better-designed product. Now that its installed, I feel stuck with something Im not satisfied with.
Marc C.
Verified
06/07/2026
Tonneau cover is nice - but damaged inside of packing
The cover went on well but once I installed it, I noticed the clip that holds the strap for locking into place in the folded position, was broken off. I found the broken piece in the packing material. The only real fix would be to send the whole cover back and I needed it for my truck. I guess I should have looked it over more closely when I removed it from the packing.
Noel M.
Verified
05/07/2026
It's good, but not 100%.
It's good, but not 100%. The corners on the front have an opening where water can get in, and it's a bit hard to open.
Kristyn
Verified
03/18/2026
Easy install, nice looking
This tonneau cover was even nicer looking than I thought it would be. Super streamlined and matches my Rhino Lining bedliner somehow. The only complaint is that I installed it three weeks ago and the adhesive foam strips are peeling up already. The truck is garage stored and it’s summer so it hasn’t been in the elements yet.
Garrett N.
Verified
03/14/2026
2026 gmc Sierra AT4X 6. 6L diesel
I installed in myself. Took me 5 hours the only struggle I had was reconnecting fuel lines. Only thing was I wish it had the brackets from the fuel pump to where the connectors end.
Dave B.
Verified
10/09/2025
Ok
With the longer bed this cover doesn’t allow you to transport with just one fold. Any suggestions. Also, any suggestions on making it less water resistant?
Nate
Verified
07/23/2026
Leaky
This is the least weather proof cover Ive ever owned, on top of that it rattles on any pot hole or bump. The only thing this cover has going for it is the appearance.
Joseph G.
Verified
07/07/2025
Clamps weren't right
The clamps don't seat well against the metal behind the cap rail plastic. So, they can't hold straight when closing the cover. I contacted support and they said to send a picture and over a week later I've gotten nothing back after additional email. Pretty disappointed that something so simple couldn't be resolved quickly. I have put backing material in place until they figure it out so I can at least use it. The tailgate seal was also not seated correctly so I had to take it off and reseat it. For such an expensive product they really aren't doing the small parts well.
Danny S.
Verified
09/20/2026
Too short
Love everything about the cover except that it’s too short. It barely covers the edge of the bed at the front and just touches the tailgate. Seems about two to three inches shorter than it should be so it doesn’t keep the water out at the tailgate and it’s not very secure for theft.
Andy
Verified
09/09/2026
Used bed cover
The foam was glued together and bed cover looks worn and half of the parts are missing . Took it to a place for an install and they told me this is definitely a used item. Wasted a whole day!
Jerry D.
Verified
07/25/2026
Not engineered well for ridgeline
very difficult to get to fit. RETURNED. Thank you for no hassle.
Danny B.
Verified
07/21/2026
1 star
Product is flimsy. You can see light escaping through the cracks from the outside. Plenty of water gets inside. Side trims are always falling off rail. Always looks dirty or faded. Side stands don’t hold up box correctly.
Dale T.
Verified
06/23/2026
Hard folding
I am very unhappy with the fit. It does not allow the tail gate of my 2026 Nissan frontier to properly close. I have to position it further forward on the bed to make it work. I would not recommend this cover or the company.
Jeff S.
Verified
06/16/2026
Be aware of damage and no customer support
Damaged bed cover and no help from customer servic
James I.
Verified
05/16/2026
Will not fit 2025 Nissan Frontier Pro X
I like the appearance and a parent quality of the product, but it would not work on a 25 Nissan frontier the rear latches would not come down enough to latch so I had to return it. customer Service was very helpful and I had no issues so far still waiting on my refund.
Marie C.
Verified
05/12/2026
Nope
It looks unfinished. The rubber molding on the sides creased up were it folds. I gave it some time n the heat to see if it would flatten and it didn’t. The corners by the cab looked unfinished. The installation of the rails was horrible, yes I did it right, and it still didn’t close and lock wo slamming it or lifting on the side rails get it to lock. For the amount of money it cost I expect much better. So I returned mine and went with another brand from another company. And am very happy now. No rubber flap edges. Easy install and locks every time. Yes: the return process was fast and easy, but I’m rating the product.
Dan C.
Verified
05/11/2026
Bakflip MX4 Ram truck w/rambox
I’m very disappointed with this product. It leaks at both the front and rear, which defeats the whole purpose of having a bed cover/top in the first place. The instructions were also a major issue. I have a Ram with the RamBox bed, but the instructions provided were for a Chevy 1500. The installation is not the same, and it made the process much more frustrating than it needed to be. Had I known the product would not seal properly and that the correct truck-specific instructions would not be included, I would have chosen a different top. At this point, I honestly wish I could return it.
Ernest S.
Verified
05/07/2026
Substandard Cover
After making several adjustments to maintain the cover from dismantling, I reached out to customer service but have yet to receive a call.
Jeffrey S.
Verified
07/21/2026
Leaks everywhere
If you want a cover that does not leak look somewhere else. It has been installed correctly and it's still does not prevent water from entering the bed. . after a good rain the bed as water in it do not keep anything that is valuable in your bed.
Chad M.
08/29/2026
Backflip MX4 Bed cover honest feedback
First of all, I don’t like to bring bad news, that being said, here it goes. Last year 2022 in may, I received my first MX4, it looked great! I had little trouble with installing it, about 30 mins I’d say. My issue is with the overall durability or thickness the bad cover aluminum, it dents so easily. One hailstorm and it looked like a golf ball. Ugh, that was just having it for a few months. The company was receptive to my concern, and sent me a “fiberglass” one to hopefully correct the issue. The next light hailstorm and it was another golf ball. I’m not sure if they sent me another aluminum one by mistake, or their fiberglass dents vs. cracks? It’s just a lot of money to ruin the look of your otherwise tough looking truck. Sorry Bakflip, you even tried to make it right by sending me another one, and still failed. Makes me feel a little sick.
RichieT
07/07/2026
Good but not perfect
Looks good, I like that it folds all the way for full bed access. One of the bumpers for when it is fully open blew off. Still leaks water inside. Could probably use to be made a little longer for more coverage over the tail gate. I was expecting better for the money I paid for this thing. I have a cheaper one on a different truck that leaks about the same. I going to try some extra gasket in places and hope for the best.