Joel J.
Verified
04/26/2026
BAKFlip Max4
Very easy install. Fits great and looks good also.
BAKFlip MX4 Hard Folding Tonneau Cover for 2019-2026 Chevrolet Silverado 1500 / GMC Sierra 1500 (8' Bed)
$1,299.99
Regular price
$1,629.99
Save $330.00
Verify fitment with your vehicle
GO
Clear
Free gifts included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
See it on a truck
Locks the moment it closes
Sealed edge to edge
Multi-layer aluminum panels
Folds to the cab, drive open
One-person install
The original hard-fold cover
Features
- Locks the moment it closes: BAK's patented auto-latch engages as each panel closes, so there is no separate locking step. BAK says the Gen 3 lock parts were re-engineered to resist forced entry better than the Gen 2. To open it, drop the tailgate and pull the release cable.
- Sealed edge to edge: Revised EPDM rubber perimeter seals and tight-fit clamps close the gap between the cover and the bed rails, and on most trucks a dual-action tailgate seal, 13% longer than before, covers the tailgate. Drain tubes carry off water that reaches the rails. BAK's own sheet notes the cover is not airtight, so think weather-resistant, not sealed.
- Multi-layer aluminum panels: Aluminum top panels sit over high-density polymer cores on aluminum side rails. BAK says the Gen 3 panels are 22% stronger than the original MX4, and the closed cover is rated at 400 lb, evenly distributed.
- Folds to the cab, drive open: Fold the panels to the cab, strap the cover to the buckles at the bulkhead and drive with the bed open for tall loads. Flipped fully upright, prop rods hold it against the cab on rubber bumpers. BAK says it is the only hard fold that leaves your 3rd brake light visible in every position.
- One-person install: Click-in clamps hold the rails to your bed rails, with no drilling on most trucks, and one person can do the job. BAK rates it at 30 minutes or less (Level 1) and says the new click-in design cuts install time by 12%.
- The original hard-fold cover: BAK says the MX4 defined the hard-folding category and calls it America's best-selling truck bed cover. The Gen 3 version (model year 2025) sits flush with the bed rails and wears a textured matte black finish on every surface.
Description & Fitment
Own a 2019-2027 Chevy Silverado 1500 / GMC Sierra 1500 with the 8' bed? This is the BAKFlip MX4 that fits it. BAK's own brands list the box at 97.8". Revised EPDM perimeter seals and tight-fit clamps help keep weather out, and drain tubes carry off water that reaches the rails. The textured matte black cover sits flush with the bed rails and is rated at 400 lb spread evenly. Its Gen 3 aluminum panels sit over a high-density polymer core, and BAK rates them 22% stronger than the original MX4. For the install, its two-piece rails join with couplers to span the 8' bed and clamp on with no drilling; BAK rates it at 30 minutes or less. It carries BAK's 5-year limited warranty.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2019-2027 | Silverado 1500 | 8' (97.8") | — |
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2019-2027 | Sierra 1500 | 8' (97.8") | — |
Check your bed: measure along the bed rail from the bulkhead to the inside of the closed tailgate. This part is for the 8' bed on the 2019-2027 Chevy Silverado 1500 / GMC Sierra 1500. BAK's own brands list this box at 97.8" long.
Not for: the 5'8" bed (BAKFlip MX4 448130 or 448135, by truck and option), the 6'6" bed (BAKFlip MX4 448131). 2014-2018 trucks with the same bed take BAKFlip MX4 448122. The 2019 Silverado 1500 LD and Sierra 1500 Limited keep the previous body and are not covered here.
About BAK Industries
BAK.
BAK makes hard tonneau covers. BAK bills itself as "America's #1 truck bed cover."
The range splits into BAKFlip hard folding covers (MX4, MX4 EZ-Lift, MX4 TS, G2, F1 and Fibermax) and Revolver hard roll-ups (X2, X4s and X4 TS). The MX4 is the aluminum-panel BAKFlip that BAK calls America's best-selling truck bed cover; the MX4 TS adds T-slot rails and the MX4 EZ-Lift adds a lift-assist system.
Authorized BAK dealer. Prestige Truck is an authorized BAK dealer, so what we sell is new and genuine BAK. BAK's warranty "is nontransferable and applies to the original purchaser of the BAK product only," and BAK requires warranty registration on file or proof of original purchase (a detailed, dated receipt) for warranty service. Your Prestige Truck order receipt is that proof.
Frequently Asked Questions
Will this fit my 2019-2027 Silverado/Sierra 1500?
Yes, if it has the 8' bed. Measured along the floor, that box is about 97.8". Measure along the bed rail from the bulkhead to the closed tailgate, and note it is not for the 5'8" bed (BAKFlip MX4 448130 or 448135, by truck and option) or the 6'6" bed (BAKFlip MX4 448131). If you are unsure, send us your VIN and we will confirm.
My truck is right at a model-year change. Which one do I need?
This part covers the 2019-2027 Chevy Silverado 1500 / GMC Sierra 1500. 2014-2018 trucks with the same bed take BAKFlip MX4 448122. Go by your truck's model year, or send us your VIN.
What changed with the Gen 3 MX4?
BAK lists stronger panels (high-density polymer cores, 22% stronger than the original MX4), re-engineered lock parts that resist forced entry better than the Gen 2, revised EPDM perimeter seals and tight-fit clamps, a dual-action tailgate seal 13% longer than before, re-engineered prop rod clips, and a click-in design that it says cuts install time by 12%.
Will it keep rain and snow out of the bed?
It is built to: edge-to-edge seals and tight-fit clamps close the gap to the bed rails, and drain tubes carry off water that reaches the rails. BAK's own install sheet says the cover is not airtight, so plan on weather-resistant rather than sealed. Clear snow and ice off before you open it; that is a warranty condition too.
How much weight can it hold?
BAK rates the closed cover at 400 lb, evenly distributed. BAK's sheet also says not to drive with objects on top of the cover or tie cargo to it.
Can I drive with it folded open?
Yes. Fold it toward the cab and attach the straps to the buckles at the bulkhead, pulled snug, and you can drive with the bed open. The cover must be secured at all points while the truck is moving; that is a condition of the warranty.
Installation
Install time
30 minutes or less (BAK's figure)
DifficultyLevel 1simple installation; one person
TypeClamp-on, no drilling on most trucks
Tools
- a 1/2" wrench or socket and a Phillips screwdriver
- plus scissors or a utility knife, isopropyl alcohol and 5/8" drill bit and drill
Here's the short version. Follow BAK's install sheet (below) for your truck's exact clamp positions and settings.
- Seal the bulkhead. Clean the top of the bulkhead with soap and water, then isopropyl alcohol, and let it dry. Stick the included bulkhead seal from one edge of the bulkhead to the other and trim the excess. With a drop-in bed liner, the seal isn't needed.
- Join the rail sections. Assemble both rail couplers with their screws and lock washers, slide a coupler into the end of each side rail, snap a rail connector onto the tail end of the rail over the seal, then slide the rail extender on and push it into the connector. Tighten the coupler screws on both sections with a Phillips screwdriver. No cutting of the cover seal is needed.
- Set and clamp the rails. Add the filler strips if your kit has them and fit the drain tubes, then set each rail on the bed rail, drain end at the cab, pushed forward and square to the bed. Attach four clamps per side, with the third clamp close to where the two rail sections join. On 2019 and newer trucks with the Multi-Pro tailgate and grab handle, the extra clamp holds the rear of the driver-side extender between the D-pillar and the grab-handle bracket, and 2007-2013 trucks use the stake pocket clamps and covers. Keep the rails level with the bed cap and tighten to 10 ft-lb (14 Nm) with a 1/2" wrench or socket. Don't over-tighten.
- Prep the cover. Slide the two cover retainer clamps into the track under the cab end of the cover, one per side. Peel the liner off each gasket, stick it under a buckle end, and screw the two buckle ends into the pre-drilled holes on the front header panel with the screws and nutserts. Hand-tighten only; don't use a screw gun.
- Set the cover in place. Lay the folded cover on the side rails at the cab end, centered between them, and turn the retainer clamps clockwise until the lock washer is snug. With the cover still folded, clean the spots for the cab bumpers with soap and water, then isopropyl alcohol, let them dry and stick the bumpers along the top edge where the cover meets the cab.
- Unfold, adjust and check. Unfold the cover toward the tailgate and center every panel side to side and front to back; the rear edge and tailgate seal rest on top of the tailgate with a 1/2" overlap. With a power tailgate, make sure it still works with the cover closed. Release each latch to check it engages the rails (the sheet shows how to adjust a slam latch), then re-tighten the retainer clamps. BAK's warranty asks you to re-check every clamp after your first week of driving.
Stuck on a step?
What's included
- Hard fold cover
- Driver side rail
- Passenger side rail
- Driver side rail extender
- Passenger side rail extender
- Bulkhead seal
- 2 cover retainer clamps
- 8 clamps (2 used on 2019+ trucks only)
- 2 buckle ends
- 2 gaskets
- 4 screws
- 4 nutserts
- 8 rubber filler strips
- 2 rail connectors
- 2 rail couplers
- 8 lock washers
- 8 screws
- 2 drain tubes
- 3 D-shaped cab bumpers (on select trucks)
- 3 oversized cab bumpers (on select trucks)
- 2 stake pocket clamps
- 2 pocket covers (2007-2013 trucks)
Specifications
| Brand | BAK |
|---|---|
| Part Number | 448132 |
| Cover Type | Hard folding |
| Generation | Gen 3 (model year 2025) |
| Top Panels | Aluminum over a high-density polymer core |
| Side Rails | Aluminum |
| Finish | Textured matte black |
| Load Capacity | 400 lb, evenly distributed |
| Locking | Patented automatic latching |
| Seals | EPDM perimeter seals; dual-action tailgate seal on most trucks |
| Drainage | Integrated drain system with drain tubes |
| Bed Access | 100% when folded against the cab |
| 3rd Brake Light | Visible in every position |
| Mounting | Clamp-on, no drilling on most trucks |
| Warranty | 5-year limited |
| Fits | 2019-2027 Chevy Silverado 1500 / GMC Sierra 1500 |
| Bed Length | 8' box (GM's name), measured 8'2" (97.8") |
| UPC | 192631020547 |
Warranty, shipping & returns
-
5-year limited warranty
BAK covers the BAKFlip MX4 against defects in materials or workmanship for five (5) years from the original date of purchase.- A defective cover or hardware component is repaired or replaced, at BAK's option; BAK may substitute a newer model with similar form and function.
- It covers the original purchaser only and is not transferable. Warranty registration must be on file, or keep a detailed, dated receipt as proof of purchase; contact us for help with registration or a claim.
- To keep it valid: clean with mild automotive soap and water only; keep the cover secured at all points while driving; check all clamps and retention parts for tightness after a week of driving after installation (or reinstallation) and now and then after that; clear snow, ice and anything else off before opening; never tow the truck from the rear with the cover on (remove and store it first).
- Claims: get a Return Material Authorization (RMA) number from BAK before returning anything. BAK may ask for the part back postage prepaid, and shipping charges apply to a repair or replacement. A claim needs your order number, contact details, vehicle, part number, a description, the receipt and photos.
- Not covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that is not a defect in material or workmanship. BAK does not accept returns of non-defective products once installed.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- This cover is an oversized item, so it ships by freight or as an oversized parcel.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
This cover ships in a long, heavy box. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.
What our customers say
4.6 · 5025 reviews
Photos from owners
+163
Lee A.
Verified
03/05/2026
Solid
Everything I expected it to be. Same as GMs only less $. I rated medium on value because Im cheap :-). Seriously though, it was easy to install. I did it solo in about 45 min. Followed YouTube instructions from a guy that took the time to video his install. Got to love YouTube. Looks sharp. Has performed as expected. Zero issues. If you have a Sierra EV, get this cover.
Dan M.
Verified
07/12/2025
Love it
Works great. The only thing I would ask is that you improve the corner pieces on the tailgate end of the cover. The can be knocked off too easily
Patrick C.
Verified
10/05/2026
Awesome tonneau cover. Very well
Awesome tonneau cover. Very well built and looks great
MichaelN1372
04/03/2026
Bak flip install
Im not the smartest when it comes to installing merchandise on my truck but for one of the first time im glad i did easy to read instructions and easy installation. I LOVE IT
William C.
Verified
05/20/2025
Backflip MX4
This is the second time I purchased this item, the first time was for the Silverado 1500 and this time for the Silverado 2500HD. Each time I installed them myself, they are easy to install and the fit great.
Howard K.
Verified
03/28/2025
Has a good tight fit,
Has a good tight fit, heavy duty cover, fits flush with top of bed of truck, easy to open and close
victor h.
Verified
09/23/2026
Exelelent
Exelelent
Brian B.
Verified
08/11/2026
Latch broke in less than a month
Latch broke in less than a month How do I get support? I have pictures of the latch which pulled out of the cover
Steve N.
Verified
05/02/2024
The best of the best
I love this cover. Easy install, low profile and sturdy as hell yet is light and easy to fold up. Even leaves room for bed rails due to being low profile. Hard covers are the way to go!!
Robertj
12/11/2025
Bakflip4
Perfect fit. Seals up great and love the drain tubes!
Garrett N.
Verified
03/14/2026
2026 gmc Sierra AT4X 6. 6L diesel
I installed in myself. Took me 5 hours the only struggle I had was reconnecting fuel lines. Only thing was I wish it had the brackets from the fuel pump to where the connectors end.
Jay S.
Verified
09/06/2026
Quality product
Quick shipping, easy to install, looks great!
Doug L.
Verified
09/09/2025
I've enjoyed using the cover.
I've enjoyed using the cover. It seems to function fairly well on my Silverado EV with the Midgate. I would like to be able to use the full bed and I've seen a few people that have designed a strut to hold this unit straight up. You may look into that and see if that's something that you can simply add
Ron
Verified
08/21/2026
Best flip top ever!
I’m generally not very mechanically inclined, but after watching a diy video the assembly went very well.
Anonymous
11/25/2025
Excellent cover
Easy install, great fit and appearance
John H.
Verified
08/10/2026
MX4 on my 2019 3500 HD truck
just got my truck back from the body shop so haven't used it much. But looks great and clears my 5th wheel hitch. Have to see how it hold up over time.
Yarin R.
Verified
09/05/2026
Cover , no strong.
Fit perfect, the issue I have is when you are folding and keep open the cover, the air kick back the cover, it is not strong enough to hold, should be better quality for the price I pay, looks good but I was disappointed that did not function as needs to be.
Ryan A.
Verified
06/17/2026
Exactly what I was looking for.
No complaints. Super well built. Very happy with my purchase.
Churchill I.
Verified
05/10/2026
Cover review
I love the cover. It looks and fits awesome on my truck.
Mike T.
Verified
02/24/2026
Good bed cover… No leaks
Good bed cover… No leaks and a good fit to the truck. . Low profile that fits the tfuck well….
Zeke
07/25/2026
Easy install, great product
love the cover
JOSEPH T.
Verified
01/03/2026
Nice topper
Very Nice, solid,good quality, fairly easy to install
michael p.
Verified
12/26/2025
Nice cover
This cover (Bakflip MX4) is lot better than BAK revolver x2... little more sturdy and durable
Richard
Verified
09/29/2025
Nice addition
I purchased this tonneau cover for my 2019 Silverado. Everything arrived promptly. I was able to install the cover by myself in a little over an hour. It does sit flush on the bed and has a low profile. I am happy with the purchase
joe b.
Verified
08/22/2025
Give the truck a clean
Give the truck a clean appearance.
Robert
02/28/2025
GMC Sierra MX4
Beautiful fit and finish and super easy to install. No leaks as of yet. Installed on 2012 GMC Sierra.
David D.
Verified
05/21/2025
MX4 is great
Great design features
William F.
Verified
03/25/2025
Good cover
On;y problem is that a corner piece broke and a repacement is not acailable. Other than that it is a good civer.
Cameron J.
Verified
07/16/2026
Leaks too much for price
The cover looks beautiful. Install was easy. But near the front of the bed on the right side water has a consistent drip during a med-high rain. If I was to know this leaked this much I would have bought a cheaper alternative. This review does not allow for media but I would post if I could.
Latonya H.
Verified
03/24/2025
I purchased this for my
I purchased this for my husband on Black Friday and I received it in a week. The box was very discreet and when he opened it, his eyes lit up. He stated installing it was a breeze and it’s now 1/11/18 and it’s looks great as ever. My husband loves his cover and he really loves that it’s flushed. For me I was thankful that a payment plan was an option. It’s definitely helped with the stresses of Christmas. Thank you thank you thank you for having such a grade A product and allowing me to put that smile on my husband’s face.
Kevin R.
Verified
01/27/2025
Bak flip mx4
Excellent tonneau cover! Everything I wanted and needed in a cover!
Geraldo
02/27/2025
Just love my backflip 4...my
Just love my backflip 4...my truck looks great!!! Very easy to install!!
William B.
Verified
12/19/2024
Very Nice cover, great fit
Installation of the unit was simple and straightforward. The cover fits perfectly and seems to seal the bed very well. This cover has delivered on all my expectations and is great value for the money.
Andrew O.
Verified
11/13/2024
Looks great, easy install, functions
Looks great, easy install, functions well, feels solid.
Martin C.
Verified
08/28/2024
BakFlip MX4 Hard Folding Tonneau Cover
Really nice product… Fair price… Great customer service
Christopher T.
Verified
07/14/2024
Bakflip MX4 Tonneau Cover
Product looks great and works well
Alan
07/07/2022
Good Price, Easy Install.
Looked at hard covers for a few weeks before settling on the MX4. I liked the price and features, especially after having a heavy, solid fiberglass cover on my previous truck. Arrived within a few days of ordering, well packaged, undamaged, with all parts. Installed in less than an hour with basic tools, easy to follow instructions. So far have driven a few hundred miles, both with cover down, and folded up, with no issues. Only critique is on the self-stick pads for when it is folded all the way up to the back of the cab. They did not stay stuck to the cover, but that may be due to the 115 degree climate in the desert. I'll try some weatherstrip adhesive and see if that overcomes it. Remains to be seen how it will handle the desert sun and heat, but after a couple months, still looks and functions as new.
Li Q.
Verified
06/05/2024
I love this bakflip
It looks decent, it functions as expected, it can be easily installed
Terry H.
Verified
04/08/2024
Great Tonneau Cover
It works and fits even better than I expected. It has been out in the rain and the inside of the box has remained completely dry!
Steve N.
Verified
03/01/2024
I had a great experience
I had a great experience with the people at Bakflip. Very helpful. I was shorted one screw and they made sure i got it. Thanks
Dennis R.
Verified
08/23/2026
I wish I bought the MX2 instead.
I had an MX 2 installed on my 2017 Tacoma in January 2017. When I recently bought a 2023 Tacoma I wanted the BakFlip for it. The MX 2 is so much easier to install and it aligns with no issues. I had to keep adjusting the rails to improve the fit. The right side of the cover did not close all the way; there was a 1/4 inch gap. Part of the problem was the rubber seal improperly installed at the factory. I managed to peel it back and adjust it as it should have been.
Rick M.
Verified
01/20/2024
great cover
great cover, easy install. missing one screw, excellent customer service shipped out screws right away. good quality product
Guest
07/11/2026
MX4 Tonneau AWESOME
Great bed cover, easy to install, very functional, LOOKS GREAT!!
Christopher D.
Verified
06/08/2026
2026 Chevy long bed DRW
The instructions were for the wrong bed length, I had to call customer service and have the correct ones sent to me. Installment smoothly after that. It has been on my truck for more than a month, I do get water in the bed much more than my short bed GMC does with a soft cover on it. Had a BAKFlip cover on my 2020 short Chevy and had no water. I was definitely hoping for the same type of coverage.
Kris
Verified
01/06/2026
Easy to install,looks good. Would
Easy to install,looks good. Would like a little longer to get a better seal on the tailgate.
John G.
Verified
09/16/2025
BAKFlip MX4
I really like how they made all panel latches clip into side rails where the previous version did not. I don't like the new design for the strap retainer on the clips that hold it when it is partially open. Now it is just a strap holder where before, it was an actual housing the clip would engage.
Mohsin C.
Verified
12/16/2024
Decent cover, was missing locking washers
Cover is decent. The drain tubes are very cheaply made. Also, make sure you have all the parts before starting the project as i was missing locking washers and had to purchase m8 locking washer from my local hardware store.
William
06/28/2026
Good Product
Good product. Shipped well, good instructions and easy self install. Only complaints... 1. The adhesive backing for the rubber bumper guards that are used when the cover is folded up against the cab is terrible. Keeps coming off and I cleaned the surface several times with isoprene alcohol as instructed. 2. The adhesive backing on the stand stops that hold the cover up when its folded against the gas is horrible also. I ended up using small sheet metal screws to hold this on.
John
Verified
07/07/2024
First Time Buyer
I purchase a Bakflip MX 4 for my 2024 Silverado Short Bed Picxkup i noticed that their are clips on the back side near the tailgate but none by the front of the lid and also leaks water by front of the lid ?Any thing i can do to solve the leakage
Mark S.
Verified
01/08/2024
Nice cover
Nice cover , very solid. my only issue is the small leak I get in the front. I have tried adjusting the position but that hasnt helped. Going to try a piece of window foam next.
Jill H.
Verified
10/08/2026
Perfect
Excellent product. Easy install. My boyfriend loves it.
Jeremy W.
Verified
09/09/2026
Great, but a dent on shipping
Everything was great, but the box was beat up a little. Upon opening the box, there was a small dent on the inner portion of the cover. Not big enough to return, just big enough to notice.
Albert P.
Verified
05/16/2026
Expected a bit more for the price
First, watched the online video instructions for my year mode and make prior to starting. Small item, but 1/8" shims shown in the video were not included with my purchase. Second, both rubber bumpers that support the cover when in the folded position became unattached after 6 weeks without ever having the cover in the folded position. Third, both struts that are used to lock the cover in the folded open position are constantly vibrated from their holders and then hang down getting entangled in what ever cargo is being carried. Just a matter of time before they are broken off.
Thomas Z.
05/26/2026
MX4 Cover
Fast shipping, easy to install, durable, great looking!!
CONNER
Verified
08/07/2026
BakFlip MX4
I’ve been wanting the BakFlip MX4 for my 17 F150 for a while and I finally broke down and bought one. It’s everything I thought it’d be. It’s has great quality, durable and can easily be installed within a couple hours by yourself, but an extra set of hands doesn’t hurt.
Gregory D.
Verified
10/08/2026
Great look
It installed easily, look great, and functions good.
Jeffrey P.
Verified
06/20/2026
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
Richard A.
Verified
06/04/2026
2026 Maverick cover
This is my third truck to install bak flip tri fold hard cover. Each one was improved and better than the last. My only issue was a wrong part was packed with mine so I had to call customer service to ship out the correct part. I think I have had this issue on the last two covers. Issue was always resolved in a professional and professional way but it is just an added cost to you and an extra step for the customer. You dont expect this from this price point.
Anonymous
05/13/2026
Awesome
I love this cover. I watched the video a couple of times an had no problem installing it by my self in about an hour. Great product!!
Sidney C.
Verified
10/08/2026
BAKFlip Excellence
I have purchased the BAKFlip MX-4 for 2 prior pickups and have been very pleased with the appearance, fit, materials, and workmanship. Thank you.
Paul H.
Verified
05/18/2026
Sturdy, Looks great
Replaced a soft cover with this. So far its been great. Gear is secure. Easy install.
Bob K.
Verified
05/16/2026
What a waste of time
First box came without hardware. Second box came with everything but was not straight with one side being longer than the other. They kept asking me for pictures and measurements till I had enough and sent it back for a full refund. Will never buy anything from them again. The funny thing is ,this is the second time they asked me to do a review on their junk.
William L.
Verified
05/14/2026
Better Than OEM with easy install
The Ford Maverick factory options are fine but the BAKFlip is heavier duty. The installation was easy and took an hour but I have installed one on my F350 previously. It may take a little longer for someone with no experience installing a bed cover. Instruction are easy to follow. The BAKFlip is popular so there are excellent videos of step by step instruction online. An advantage of the BAKFlip is it is more secure than a regular cover. It’s going to be hard for someone to break into my bed and steal anything.
Anonymous
04/28/2026
Great Product
Great product, great fit, fast shipping.
Kristen W.
Verified
08/21/2026
Poor quality
The first backflip we received had a divet in the panel. They sent us a new panel that had the corner cover damaged and the screw pulled out. It was for a Long bed truck and it didn’t come with full length solid rails we had to add the extra 2’ which wasn’t easy and was annoying. Since we have been using it for over a month, 4-5 of the protective foam pieces have come loose and fallen off and we have tried to put some back on but they keep falling off. Overall this seems like a very low quality truck bed cover with components that can’t hold up to hardly any use or the outdoor elements. Very disappointed in this product.
Michael F.
Verified
05/09/2026
2026 F350 6. 5
Love the new design. Light weight and excellent quality and design. Easy to install with minimal tool required and the looks are amazing. Super sleek.
Duane
Verified
05/07/2026
Tonneau cover looks great and
Tonneau cover looks great and was very easy to install. It’s very easy to fold open and gives full access to the whole bed.
Michael R.
Verified
05/06/2026
Awesome Cover
This BAKFlip is the best cover Ive had on any of my trucks by far. Easily installed and gives the truck a nice clean look. Dont hesitate buy one today!
James R.
Verified
10/08/2026
Topper
Got the cover quickly. Install was pretty easy but I did read and watch videos before install. My 11 year old grandson, he did most of the work inside the truck bed, and my son assisted. So you know it was a straight forward install. Love the topper.
Anonymous
04/15/2026
Excellent product 5 stars. they
Excellent product 5 stars. they figured it out
Kenneth
Verified
04/28/2026
BAKFlip MX4 Tonneau Cover
I’m very pleased with the fit, finish and ease of installation. A couple of pieces were damaged in shipping and customer service replaced them quickly. The only improvement that I can suggest is a heavier duty box to ship it in.
charles f.
Verified
04/24/2026
It leaks
Was initially impressed with the bed cover. Appearance is great, installation was easy. But after a rain, water pools in the middle of the cover and begins to leak in the middle of the bed. Ive had numerous bed covers (roll up/soft trifold/hard trifold) and they all leak and I understand that it is unavoidable. However, other bed covers have leaked towards the cab or at the tailgate. This one leaks right in the middle of the bed. For the price I cannot and would not recommend this cover to friends/family.
Steve K.
Verified
10/08/2026
Great tonneau cover
Great tonneau cover for the money.
Douglas B.
Verified
04/20/2026
Best Value Tonneau Cover
Easy installation and very versatile tri-folding Tonneau Cover. Removes easily. Aesthetically appealing. Highly recommend.
Anonymous
04/01/2026
Easy to install Looks beautiful.
Easy to install Looks beautiful.
Larry C.
Verified
04/17/2026
Great Fit and Look
Excellent customer service and easy on line ordering. Packaged well and received with no damage. Easy install. Very pleased with look.
Kevin W.
Verified
05/02/2026
MX4 Gen 3
I like the cover especially because it's a hard top. There still is leakage and some parts, like the seal, seem to be fragile. Mines popped off. I have to move it a little to make it lock. If I have to use my whole truck bed, it covers my whole back window. I do like the steak flush look. I like that it easily opens with the pull down. I also like the fact you can close it with the truck bed door open or closed. Overall I like it, but for the price, definitely wish there were some things that were better.
Richard M.
Verified
10/08/2026
bed cover
the cover added nice look to my chevy truck
Reginald S.
Verified
04/14/2026
The Best Truck Bed Cover Yet!
In 2015, I bought my first BakFlip and transferred it to my second Ram 1500. Here in 2026, I bought my third Ram and decided to get the new BakFlip design and am glad I did. Very easy to install and it took me less than 30 minutes. I love the finished look - like it's from the Ram factory. I like that the folded panels are really secured in place when driving and won't get whipped in the wind plus it leaves room for maximum cargo space. The upgraded cable system for latching and unlatching is another big plus. They really designed a great product and I recommend it over all the others out there. . . well worth the money!
Jeremy
Verified
08/11/2026
Poor Q/A inspection
While the cover looks good the quality of parts were defective. I had to call for replacement and repair parts twice. The cable to release the lip broke due to poor workmanship. I had to replace the latch myself after only 2 weeks. This is way overpriced for having to fix it myself.
Jtmalone86
08/18/2026
Great utility, quality not as much
My wife had one of these on her 2010 nissan titan and it was perfect in every way. So when we bought a newer truck (2015 ram 2500) we wanted to get the same cover. Tonneau was shipped quickly, was packed well and had easy instructions. The fitment is perfect and the overall utility is great. I espec6like how it acts as a headache rack when fully up and out of the way. I've had this item for a year now and have had it opened and closed around 30-40 times. The wire for the section closest to the tailgate broke. Inside the latches the wire is looped and crimped on and it slid out of the crimps. So I had to buy new cable and fix it. Works like a charm now. I will say the other stock cables work well and have not broken. Other issue is the clips that hold the seal into the side of the tonneau keep popping out. They pop back in easily but it's definitely annoying and causes the seal to…
duke
09/12/2026
quiestionable longevity
I have this cover on a 2021 F250. I work in the construction industry and need to open it often. The corner pieces have fallen off and the coating doesn't hold up to medium use. The seal leak in various places. If this is something you rely on, I would consider other brands.
Logan S.
Verified
11/14/2025
Looks Great but Leaks
I love the low profile look of the cover but it leaks in the corners by the cab. I even purchased some silicone putty to fill in the gaps between the bed and the cover, but it still leaks.
Alex S.
Verified
08/06/2026
I am happy with the
I am happy with the product. It works well. My goal was to purchase a more heavy-duty cover, but currently it is not made for the 2026 GMC Sierra AT4 EV. If that ever changes please contact me as I most likely will be interested.
Gary C.
Verified
11/13/2025
Needs Additional Latch set
Second fold from rear window needs a latch set. The joint raises and lowers after your speed reaches 70 mph and above. This can lead to water leaks at the joint. Contacted company, but would not fix problem or refund money. They said this is normal function of the cover. This problem is caused by the design of the aerodynamics of the truck with the Cab Air Deflectors. This is different from all other Chevy Trucks.
Daron N.
Verified
07/23/2026
Disappointing Quality for the Price
For the price I paid, I wouldnt buy this cover again. The biggest issue is with the long-bed rails. They come in two pieces, but only include three mounting clips. Because of this, its very difficult to get the rails properly aligned during installation, and they never seem to line up quite right. The adhesive rubber bumpers have already started coming loose after being exposed to warm weather. Lastly, the cover gets extremely hot in direct sunlight. It becomes uncomfortable to touch and makes it painful to open when needed. Overall, Im disappointed. For what this cover costs, I expected better quality and a better-designed product. Now that its installed, I feel stuck with something Im not satisfied with.
Marc C.
Verified
06/07/2026
Tonneau cover is nice - but damaged inside of packing
The cover went on well but once I installed it, I noticed the clip that holds the strap for locking into place in the folded position, was broken off. I found the broken piece in the packing material. The only real fix would be to send the whole cover back and I needed it for my truck. I guess I should have looked it over more closely when I removed it from the packing.
Noel M.
Verified
05/07/2026
It's good, but not 100%.
It's good, but not 100%. The corners on the front have an opening where water can get in, and it's a bit hard to open.
Dave B.
Verified
10/09/2025
Ok
With the longer bed this cover doesn’t allow you to transport with just one fold. Any suggestions. Also, any suggestions on making it less water resistant?
Nate
Verified
07/23/2026
Leaky
This is the least weather proof cover Ive ever owned, on top of that it rattles on any pot hole or bump. The only thing this cover has going for it is the appearance.
Joseph G.
Verified
07/07/2025
Clamps weren't right
The clamps don't seat well against the metal behind the cap rail plastic. So, they can't hold straight when closing the cover. I contacted support and they said to send a picture and over a week later I've gotten nothing back after additional email. Pretty disappointed that something so simple couldn't be resolved quickly. I have put backing material in place until they figure it out so I can at least use it. The tailgate seal was also not seated correctly so I had to take it off and reseat it. For such an expensive product they really aren't doing the small parts well.
Danny S.
Verified
09/20/2026
Too short
Love everything about the cover except that it’s too short. It barely covers the edge of the bed at the front and just touches the tailgate. Seems about two to three inches shorter than it should be so it doesn’t keep the water out at the tailgate and it’s not very secure for theft.
Andy
Verified
09/09/2026
Used bed cover
The foam was glued together and bed cover looks worn and half of the parts are missing . Took it to a place for an install and they told me this is definitely a used item. Wasted a whole day!
Jerry D.
Verified
07/25/2026
Not engineered well for ridgeline
very difficult to get to fit. RETURNED. Thank you for no hassle.
Danny B.
Verified
07/21/2026
1 star
Product is flimsy. You can see light escaping through the cracks from the outside. Plenty of water gets inside. Side trims are always falling off rail. Always looks dirty or faded. Side stands don’t hold up box correctly.
Dale T.
Verified
06/23/2026
Hard folding
I am very unhappy with the fit. It does not allow the tail gate of my 2026 Nissan frontier to properly close. I have to position it further forward on the bed to make it work. I would not recommend this cover or the company.
Jeff S.
Verified
06/16/2026
Be aware of damage and no customer support
Damaged bed cover and no help from customer servic
James I.
Verified
05/16/2026
Will not fit 2025 Nissan Frontier Pro X
I like the appearance and a parent quality of the product, but it would not work on a 25 Nissan frontier the rear latches would not come down enough to latch so I had to return it. customer Service was very helpful and I had no issues so far still waiting on my refund.
Marie C.
Verified
05/12/2026
Nope
It looks unfinished. The rubber molding on the sides creased up were it folds. I gave it some time n the heat to see if it would flatten and it didn’t. The corners by the cab looked unfinished. The installation of the rails was horrible, yes I did it right, and it still didn’t close and lock wo slamming it or lifting on the side rails get it to lock. For the amount of money it cost I expect much better. So I returned mine and went with another brand from another company. And am very happy now. No rubber flap edges. Easy install and locks every time. Yes: the return process was fast and easy, but I’m rating the product.
Dan C.
Verified
05/11/2026
Bakflip MX4 Ram truck w/rambox
I’m very disappointed with this product. It leaks at both the front and rear, which defeats the whole purpose of having a bed cover/top in the first place. The instructions were also a major issue. I have a Ram with the RamBox bed, but the instructions provided were for a Chevy 1500. The installation is not the same, and it made the process much more frustrating than it needed to be. Had I known the product would not seal properly and that the correct truck-specific instructions would not be included, I would have chosen a different top. At this point, I honestly wish I could return it.
Ernest S.
Verified
05/07/2026
Substandard Cover
After making several adjustments to maintain the cover from dismantling, I reached out to customer service but have yet to receive a call.
Jeffrey S.
Verified
07/21/2026
Leaks everywhere
If you want a cover that does not leak look somewhere else. It has been installed correctly and it's still does not prevent water from entering the bed. . after a good rain the bed as water in it do not keep anything that is valuable in your bed.
Chad M.
08/29/2026
Backflip MX4 Bed cover honest feedback
First of all, I don’t like to bring bad news, that being said, here it goes. Last year 2022 in may, I received my first MX4, it looked great! I had little trouble with installing it, about 30 mins I’d say. My issue is with the overall durability or thickness the bad cover aluminum, it dents so easily. One hailstorm and it looked like a golf ball. Ugh, that was just having it for a few months. The company was receptive to my concern, and sent me a “fiberglass” one to hopefully correct the issue. The next light hailstorm and it was another golf ball. I’m not sure if they sent me another aluminum one by mistake, or their fiberglass dents vs. cracks? It’s just a lot of money to ruin the look of your otherwise tough looking truck. Sorry Bakflip, you even tried to make it right by sending me another one, and still failed. Makes me feel a little sick.
RichieT
07/07/2026
Good but not perfect
Looks good, I like that it folds all the way for full bed access. One of the bumpers for when it is fully open blew off. Still leaks water inside. Could probably use to be made a little longer for more coverage over the tail gate. I was expecting better for the money I paid for this thing. I have a cheaper one on a different truck that leaks about the same. I going to try some extra gasket in places and hope for the best.