BAKFlip MX4 hard folding tonneau cover seen from above the bed rails, rear panel folded forward
BAKFlip MX4 tonneau cover partly folded on a faded pickup with a Best Seller badge
Tonneau cover folded up to the cab with the bed loaded, captioned full bed access
View from the tailgate of the BAKFlip MX4 folded against the cab, captioned America's best-selling truck bed cover
Steel toolboxes stacked on the closed cover panels, captioned built stronger
Water splashing on the cover panel surface, captioned sealed edge-to-edge
Ghosted pickup showing the BAKFlip MX4 panels with a New and Improved badge
Close-up of the BAKFlip MX4 rail with the automatic latch outlined, captioned automatic security
Hand tightening a BAKFlip MX4 rail clamp with a ratchet, captioned easy one-person install
BAK badge on the BAKFlip MX4 rail end cap
Best-in-class warranty shield over the BAKFlip MX4 panel texture
BAKFlip MX4 hard folding tonneau cover partly folded on a silver Ram 1500

BAKFlip MX4 Hard Folding Tonneau Cover for 2019-2026 Ram 1500 Multifunction Tailgate (5'7" Bed)

$1,249.99 $1,566.99 Save $317.00
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear
Flash Sale Ends in--:--:--

Free gifts included with your order

Details
Details
Details
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
  • Guaranteed FitmentTeam-confirmed fit or money back
  • No Sales TaxZero sales tax on every order
  • 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

+1 (470) 823-2453 Email Us
Locks the moment it closes
Sealed edge to edge
Multi-layer aluminum panels
Folds to the cab, drive open Folds to the cab, drive open
One-person install
The original hard-fold cover

Features

  • Locks the moment it closes: BAK's patented auto-latch engages as each panel closes, so there is no separate locking step. BAK says the Gen 3 lock parts were re-engineered to resist forced entry better than the Gen 2. To open it, drop the tailgate and pull the release cable.
  • Sealed edge to edge: Revised EPDM rubber perimeter seals and tight-fit clamps close the gap between the cover and the bed rails, and on most trucks a dual-action tailgate seal, 13% longer than before, covers the tailgate. Drain tubes carry off water that reaches the rails. BAK's own sheet notes the cover is not airtight, so think weather-resistant, not sealed.
  • Multi-layer aluminum panels: Aluminum top panels sit over high-density polymer cores on aluminum side rails. BAK says the Gen 3 panels are 22% stronger than the original MX4, and the closed cover is rated at 400 lb, evenly distributed.
  • Folds to the cab, drive open: Fold the panels to the cab, strap the cover to the buckles at the bulkhead and drive with the bed open for tall loads. Flipped fully upright, prop rods hold it against the cab on rubber bumpers. BAK says it is the only hard fold that leaves your 3rd brake light visible in every position.
  • One-person install: Click-in clamps hold the rails to your bed rails, with no drilling on most trucks, and one person can do the job. BAK rates it at 30 minutes or less (Level 1) and says the new click-in design cuts install time by 12%.
  • The original hard-fold cover: BAK says the MX4 defined the hard-folding category and calls it America's best-selling truck bed cover. The Gen 3 version (model year 2025) sits flush with the bed rails and wears a textured matte black finish on every surface.

Description & Fitment

Part 448226 is the BAKFlip MX4 for the 2019-2027 Ram 1500 (current body, not the Ram 1500 Classic) with the 5'7" bed, with the multifunction tailgate, without RamBox. BAK's own brands list the box at 67.4". Revised EPDM perimeter seals and tight-fit clamps help keep weather out, and drain tubes carry off water that reaches the rails. Its Gen 3 aluminum panels sit over a high-density polymer core, and BAK rates them 22% stronger than the original MX4. Re-engineered prop rod clips hold it upright against the cab, and rubber bumpers protect the cab paint. Fitting it is straightforward: it clamps on with no drilling, with spacers on the bed braces and drain cups that empty through the bed wall, and BAK calls it a Level 1 job of 30 minutes or less. Trucks without the multifunction tailgate take BAKFlip MX4 448227 instead. The warranty is BAK's 5-year limited coverage.

Fitment & Compatibility

Ram
Years Model Bed Notes
2019-2027 1500 5'7" (67.4") w/o RamBox, w/ Multifunction Tailgate

Check your bed: measure along the bed rail from the bulkhead to the inside of the closed tailgate. This part is for the 5'7" bed on the 2019-2027 Ram 1500 (current body, not the Ram 1500 Classic). BAK's own brands list this box at 67.4" long. Fit notes from BAK: without RamBox (2019-2027 Ram 1500); with the multifunction tailgate (2019-2027 Ram 1500).

Not for: the 6'4" bed (BAKFlip MX4 448223 or 448225, by truck and option), trucks without the multifunction tailgate (BAKFlip MX4 448227), trucks with RamBox and silver cargo rails (BAKFlip MX4 448227RB), the Ram 1500 Classic (2019-2024, previous body), which takes BAKFlip MX4 448207.

About BAK Industries

BAK.

BAK makes hard tonneau covers. BAK bills itself as "America's #1 truck bed cover."

The range splits into BAKFlip hard folding covers (MX4, MX4 EZ-Lift, MX4 TS, G2, F1 and Fibermax) and Revolver hard roll-ups (X2, X4s and X4 TS). The MX4 is the aluminum-panel BAKFlip that BAK calls America's best-selling truck bed cover; the MX4 TS adds T-slot rails and the MX4 EZ-Lift adds a lift-assist system.

Authorized BAK dealer. Prestige Truck is an authorized BAK dealer, so what we sell is new and genuine BAK. BAK's warranty "is nontransferable and applies to the original purchaser of the BAK product only," and BAK requires warranty registration on file or proof of original purchase (a detailed, dated receipt) for warranty service. Your Prestige Truck order receipt is that proof.

Frequently Asked Questions

Will this fit my 2019-2027 Ram 1500?

Yes, if it has the 5'7" bed, with the multifunction tailgate, without RamBox. Measured along the floor, that box is about 67.4". Measure along the bed rail from the bulkhead to the closed tailgate, and note it is not for the 6'4" bed (BAKFlip MX4 448223 or 448225, by truck and option) or trucks without the multifunction tailgate (BAKFlip MX4 448227). If you are unsure, send us your VIN and we will confirm.

What if my truck is not equipped with the multifunction tailgate?

Then this one is not the right part: BAK lists BAKFlip MX4 448227 for Ram 1500 trucks without the multifunction tailgate. This page is for trucks with the multifunction tailgate, without RamBox.

What changed with the Gen 3 MX4?

BAK lists stronger panels (high-density polymer cores, 22% stronger than the original MX4), re-engineered lock parts that resist forced entry better than the Gen 2, revised EPDM perimeter seals and tight-fit clamps, a dual-action tailgate seal 13% longer than before, re-engineered prop rod clips, and a click-in design that it says cuts install time by 12%.

Will it keep rain and snow out of the bed?

It is built to: edge-to-edge seals and tight-fit clamps close the gap to the bed rails, and drain tubes carry off water that reaches the rails. BAK's own install sheet says the cover is not airtight, so plan on weather-resistant rather than sealed. Clear snow and ice off before you open it; that is a warranty condition too.

How much weight can it hold?

BAK rates the closed cover at 400 lb, evenly distributed. BAK's sheet also says not to drive with objects on top of the cover or tie cargo to it.

Can I drive with it folded open?

Yes. Fold it toward the cab and attach the straps to the buckles at the bulkhead, pulled snug, and you can drive with the bed open. The cover must be secured at all points while the truck is moving; that is a condition of the warranty.

Installation

Install time 30 minutes or less (BAK's figure)
DifficultyLevel 1simple installation; one person
TypeClamp-on, no drilling
Tools
  • a 1/2" wrench or socket and a Phillips screwdriver
  • plus scissors or a utility knife, isopropyl alcohol and 5/8" drill bit and drill

Here's the short version. Follow BAK's install sheet (below) for your truck's exact clamp positions and settings.

  1. Fit the spacers and seals. Clean each spot with soap and water first. Stick a bed brace spacer and a filler seal onto each bed brace, then stick the bulkhead seal from one edge of the bulkhead to the other.
  2. Clamp the side rails. The rails are left- and right-handed, with the prop rods inside the bed; the extension at the cab end sits on top of the bed rail and its end cap butts against the bed brace. Fit three clamps per side (front, rear and middle), keep the rails level with the bed cap and square to the bed rails, and tighten to about 10 ft-lb with a 1/2" wrench or socket. Don't over-tighten.
  3. Fit the drain cups. Push each drain cup up under the bed brace with its spout aimed into the hole in the bed wall, then secure it with the drain cup fasteners. The rail's end cap drains into the cup.
  4. Prep the cover. Slide the two cover retainer clamps into the track under the cab end of the cover, one per side. Peel the liner off each gasket, stick it under a buckle end, and screw the two buckle ends into the pre-drilled holes on the front header panel with the screws and nutserts. Hand-tighten only; don't use a screw gun.
  5. Set the cover in place. Lay the folded cover on the side rails with the front flap on top of the bulkhead. Turn each cover retainer clamp so its long side runs side to side and its tabs line up with the diagonal arm of the bed brace, then tighten the knobs clockwise until the lock washer is snug. Clean the cab bumper spots with soap and water and stick the bumpers along the top edge where the cover meets the cab.
  6. Unfold, adjust and check. Unfold the cover toward the tailgate and center every panel side to side and front to back; the rear edge and tailgate seal rest on top of the tailgate with a 1/2" overlap. With a power tailgate, make sure it still works with the cover closed. Release each latch to check it engages the rails (the sheet shows how to adjust a slam latch), then re-tighten the retainer clamps. BAK's warranty asks you to re-check every clamp after your first week of driving.

Stuck on a step? Ask our install experts

What's included
  • Hard fold cover
  • Driver side rail
  • Passenger side rail
  • 2 bed brace spacers
  • 2 filler seals
  • Bulkhead seal
  • 2 cover retainer clamps
  • 6 clamps
  • 2 buckle ends
  • 2 gaskets
  • 4 screws
  • 4 nutserts
  • Drain cup, left and right
  • 4 drain cup fasteners
  • 3 D-shaped cab bumpers

Specifications

BrandBAK
Part Number448226
Cover TypeHard folding
GenerationGen 3 (model year 2025)
Top PanelsAluminum over a high-density polymer core
Side RailsAluminum
FinishTextured matte black
Load Capacity400 lb, evenly distributed
LockingPatented automatic latching
SealsEPDM perimeter seals; dual-action tailgate seal on most trucks
DrainageIntegrated drain system with drain tubes
Bed Access100% when folded against the cab
3rd Brake LightVisible in every position
MountingClamp-on, no drilling on most trucks
Warranty5-year limited
Fits2019-2027 Ram 1500 (current body, not the Ram 1500 Classic), with the multifunction tailgate, without RamBox
Bed Length5'7" (67.4")
UPC192631034346

Warranty, shipping & returns

  • 5-year limited warranty

    BAK covers the BAKFlip MX4 against defects in materials or workmanship for five (5) years from the original date of purchase.
    • A defective cover or hardware component is repaired or replaced, at BAK's option; BAK may substitute a newer model with similar form and function.
    • It covers the original purchaser only and is not transferable. Warranty registration must be on file, or keep a detailed, dated receipt as proof of purchase; contact us for help with registration or a claim.
    • To keep it valid: clean with mild automotive soap and water only; keep the cover secured at all points while driving; check all clamps and retention parts for tightness after a week of driving after installation (or reinstallation) and now and then after that; clear snow, ice and anything else off before opening; never tow the truck from the rear with the cover on (remove and store it first).
    • Claims: get a Return Material Authorization (RMA) number from BAK before returning anything. BAK may ask for the part back postage prepaid, and shipping charges apply to a repair or replacement. A claim needs your order number, contact details, vehicle, part number, a description, the receipt and photos.
    • Not covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that is not a defect in material or workmanship. BAK does not accept returns of non-defective products once installed.

  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Order by 5 PM ET on a business day and it starts processing the same day.
    • This cover is an oversized item, so it ships by freight or as an oversized parcel.
    • Most orders arrive within 1-5 business days.
    • We email your tracking number as soon as it ships.

  • Inspect on delivery

    This cover ships in a long, heavy box. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.

  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.

What our customers say

4.6 · 5025 reviews

Photos from owners

+168
GEORGE M. Verified
09/21/2026

Extra Storage

Really appreciate everything from the ease of the delivery and installation to the additional dry, protected storage that this offers. Would recommend to anyone that was even considering a bed cover.

Robert H. Verified
09/09/2026

Pleasantly Surprised

The BAKFlip M4 was a great addition to my 2023 Ram 1500. Install was as described and the fit is top notch. Great product and customer service experience as I had to return the first one due to damage in shipping. Great job.

John V. Verified
08/01/2026

easy install

Took, maybe thirty minutes to install by myself. Looks great, functions as it should. Looks great on my truck.

Luke Verified
07/20/2026

Great tonneau cover would buy

Great tonneau cover would buy again.

miekagoff
12/08/2025

Solidly built, easy to install

The BakFlip MX4 is a well made hard tonneau cover. It took only about 30 minutes to install by myself. The install was very easy and the instructions were a breeze to follow. The cover looks perfect on my truck and keeps the bed bone dry.

Curtis Verified
07/11/2026

GMC 1500 Carbon Body Tonneau

The Bakflip cover is perfectly designed and built for this truck. The clips work perfectly! This cover is the most secure cover I can imagine...works great and looks great!

Charles F. Verified
05/06/2026

Bed Cover

Much improvement over the BakFlip.

Randy D. Verified
03/30/2026

Excellent Product

Completely impressed how dry the bed is.

Brian B. Verified
08/11/2026

Latch broke in less than a month

Latch broke in less than a month How do I get support? I have pictures of the latch which pulled out of the cover

Joseph D. Verified
01/13/2026

Great Cover

Easy install, Great fit.

Anonymous
10/05/2025

BACKFlip MX4

Easy to put on my 2021 Ram already had LINE-X liner no problem with install didn’t need shims either

David Verified
12/06/2025

New Toy Tonneau

The MX4 installed exactly as stated in the directions. Easy and quick. It appears sold and looks great! I should get many years of service out of my investment in this product.

Richard L. Verified
11/09/2025

MX4

When on fairly easy and works great

Robert R. Verified
08/09/2025

Great Tonneau Cover

I am glad I spent a bit more to upgrade to the BAKFlip, rather than sticking with the brand I have used in the past. The quality is noticeable.

Don S. Verified
05/12/2025

Looks

Best looking tonneau on the market

DGHtown
04/18/2025

Easy Install

Easy install for my truck. Two people help but one person can do it for sure. Maybe a one hour install.

Mark S. Verified
03/13/2025

BAKFlip MX4 Hard Folding Tonneau Cover

Easy installation. Very well made. A great addition to my truck.

Yarin R. Verified
09/05/2026

Cover , no strong.

Fit perfect, the issue I have is when you are folding and keep open the cover, the air kick back the cover, it is not strong enough to hold, should be better quality for the price I pay, looks good but I was disappointed that did not function as needs to be.

Matthew N. Verified
03/01/2025

Nice cover

This is a really nice cover. Had one on my previous truck also. I like it because you can open it up and use your entire truck bed. Keeps every thing inside safe and secure Aldo it don't leak. I installed it myself and only took half an hour. I would recomend to anyone looking for a cover and still need to use entire truck bed.

Cirilo C. Verified
02/02/2025

Great product

I installed it for a family road trip and it works great. Luggage in back and if needed I open a little more and add souvenirs. It has rained and nothing has gotten wet. 1000 is a lot but it is easy to move.

Thomas H. Verified
01/12/2025

Tonneau cover

This is the third truck that I have purchased the backflip cover for. It looks great and installation couldn't be any easier.

Larry
08/05/2026

Fits Well and Easy to Install

I'm very pleased with my BakFlip tonneau cover. It fits well, is quality built and was easier to install than I expected.

Drew N. Verified
12/15/2024

It’s perfect

Great design and easy installation

John S. Verified
11/04/2024

Mx4

A great product. Installation on long bed was not easy. The bed rails wanted to sag and the latches wouldn't catch . I ended up buying some rubber shims and that worked ok. Maybe Bak should include more clamps.

Terry E. Verified
09/24/2024

Exactly as advertised

Had a hard time getting the rails on square during the installation. Once I got it right and the top properly aligned it works great. Worth the time fine tuning the rails. Love having the ability to take a road trip without having to stuff my tools and luggage in the cab. Thought I would put it on and never remove it, but ended up needing to move several large appliances. Easy to take off and reinstall it when I was done. Super happy with my purchase.

David D. Verified
08/18/2024

Backflip MX4

Super easy installation, low profile and no water leaks. I would highly recommend this cover to keep your bed dry and personal belongings out of sight

Alphonso
11/20/2024

BakFlip

Love the product. Haven’t had the change to put it to use besides looking good! Easy installation, easy use, great look! Oh, excellent customer service!

Samuel P. Verified
07/08/2024

Cover

Nice quality and fit. Fast delivery.

Adalberto R. Verified
05/31/2024

Love it!

I had a bakflip cover year ago, but definitely this one looks a lot better and upgraded design from the previous one. It's lighter on weight, but sturdy and strong. I like the design at the end of the cover. That new "lip" sits on the tailgate and feels that it seals better than the previous style. I also like the way they improved on the pull cable to open the flaps. The cable is protected and secured better so it won't slide of it's track system. I'm content and satisfied.

Cameron J. Verified
07/16/2026

Leaks too much for price

The cover looks beautiful. Install was easy. But near the front of the bed on the right side water has a consistent drip during a med-high rain. If I was to know this leaked this much I would have bought a cheaper alternative. This review does not allow for media but I would post if I could.

David M. Verified
05/06/2024

Nice cover

Installs fairly easy. Use a torque wrench on the brackets. Looks good. Keeps the rain out. Easy to use.

Donald H. Verified
04/02/2024

Problem solved

So the final flip broke the first time I use it. I called and within a day I had parts to fix it. But as I got into it, it was merely a clamp that hadn't been tightened. Now I have parts for the future!!! Great customer service. Just sent pic of model to friend for his new truck.

SteveV
12/25/2025

Amazing Cover

I added Elevate Rails and install of Cover rails was a little challenging as instructions don’t cover the added rails and added adjustments

Daniel F. Verified
02/28/2024

It looks great but I

It looks great but I think it could have been a little bit wider so it fits better on the rail of the truck

Renzo M. Verified
01/13/2024

Happy with my purchase

This was a good buy. Very easy to install and a very sturdy product It makes a big difference on my truck and now I can use it to store some items. Price is a little high but like they say, you get what you pay for...which in this case, it's "quality"

Eric H. Verified
09/30/2026

Great cover

It's a great cover, looks good, and install was super easy. Only reason I'm giving 4 stars right now is because one of the corner covers on the tailgate end was broken and I'm waiting on a warranty claim.

John E. Verified
05/05/2026

8’ Bakflip

We love the look so much better than our previous soft top trifold. Assembly was much longer than advertised, but my truck is a long bed so I had to add extensions. I would have rated the top five stars but I have two leaks I trying to get stopped. I would purchase this product again.

CK3500
07/08/2024

2024 Ram 3500 BAK MX4 folding tonneau 8' bed

Installation was pretty straight forward, nothing crazy, took about 2 hours to install. Looks great and performs as advertised. Only issue is the top seal that goes along the sides will come up at the forward end. I ended up using some black RTV and haven't had an issue since. Most of the foam pieces will fall off within a week, but no big deal. Still lets in some water but not horrible. All in all a good purchase and would buy again. 4.5/5

Don P. Verified
01/27/2025

Don in Tampa

Nice cover and fully functional I like the flat finish but it is not at all scratch resistant

Marcey L. Verified
11/27/2024

Took a couple of weeks

Took a couple of weeks to arrive. Watched installation video and very easy to install. Does a good job keeping water out bed of truck. Easy open and close. Scratches easily.

Michael H. Verified
11/15/2024

Cold weather could have a

Cold weather could have a factor cage description on some stuff for us older gentleman

Dennis R. Verified
08/23/2026

I wish I bought the MX2 instead.

I had an MX 2 installed on my 2017 Tacoma in January 2017. When I recently bought a 2023 Tacoma I wanted the BakFlip for it. The MX 2 is so much easier to install and it aligns with no issues. I had to keep adjusting the rails to improve the fit. The right side of the cover did not close all the way; there was a 1/4 inch gap. Part of the problem was the rubber seal improperly installed at the factory. I managed to peel it back and adjust it as it should have been.

Gary D. Verified
06/12/2024

Just what I wanted!

This cover meets all of my needs and looks great as well! It seals well, and locks down securely once you align the rails well. I personally found the installation challenging getting the rails aligned, so got an installer to finish it for me. I also needed to replace one of the cover end caps TWICE, which is only a minor problem but speaks to possible product quality issues.

Timothy
06/26/2026

Fits and works perfectly!

Fits and works perfectly!

Jeremy W. Verified
09/09/2026

Great, but a dent on shipping

Everything was great, but the box was beat up a little. Upon opening the box, there was a small dent on the inner portion of the cover. Not big enough to return, just big enough to notice.

CONNER Verified
08/07/2026

BakFlip MX4

I’ve been wanting the BakFlip MX4 for my 17 F150 for a while and I finally broke down and bought one. It’s everything I thought it’d be. It’s has great quality, durable and can easily be installed within a couple hours by yourself, but an extra set of hands doesn’t hurt.

Jeffrey P. Verified
06/20/2026

Better then expected.

Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.

Jill H. Verified
10/08/2026

Perfect

Excellent product. Easy install. My boyfriend loves it.

Jason
05/28/2026

Better than expected!!

Perfect fit and easy to install on my 2022 Ram 2500. Been through the car wash several times and it appears to be very water tight. I’m very happy with this product!

Richard A. Verified
06/04/2026

2026 Maverick cover

This is my third truck to install bak flip tri fold hard cover. Each one was improved and better than the last. My only issue was a wrong part was packed with mine so I had to call customer service to ship out the correct part. I think I have had this issue on the last two covers. Issue was always resolved in a professional and professional way but it is just an added cost to you and an extra step for the customer. You dont expect this from this price point.

Paul H. Verified
05/18/2026

Sturdy, Looks great

Replaced a soft cover with this. So far its been great. Gear is secure. Easy install.

Gregory D. Verified
10/08/2026

Great look

It installed easily, look great, and functions good.

Bob K. Verified
05/16/2026

What a waste of time

First box came without hardware. Second box came with everything but was not straight with one side being longer than the other. They kept asking me for pictures and measurements till I had enough and sent it back for a full refund. Will never buy anything from them again. The funny thing is ,this is the second time they asked me to do a review on their junk.

Albert P. Verified
05/16/2026

Expected a bit more for the price

First, watched the online video instructions for my year mode and make prior to starting. Small item, but 1/8" shims shown in the video were not included with my purchase. Second, both rubber bumpers that support the cover when in the folded position became unattached after 6 weeks without ever having the cover in the folded position. Third, both struts that are used to lock the cover in the folded open position are constantly vibrated from their holders and then hang down getting entangled in what ever cargo is being carried. Just a matter of time before they are broken off.

Brad
05/12/2026

Awesome! Love, love, love it!

Awesome! Love, love, love it!

William L. Verified
05/14/2026

Better Than OEM with easy install

The Ford Maverick factory options are fine but the BAKFlip is heavier duty. The installation was easy and took an hour but I have installed one on my F350 previously. It may take a little longer for someone with no experience installing a bed cover. Instruction are easy to follow. The BAKFlip is popular so there are excellent videos of step by step instruction online. An advantage of the BAKFlip is it is more secure than a regular cover. It’s going to be hard for someone to break into my bed and steal anything.

Sidney C. Verified
10/08/2026

BAKFlip Excellence

I have purchased the BAKFlip MX-4 for 2 prior pickups and have been very pleased with the appearance, fit, materials, and workmanship. Thank you.

Michael F. Verified
05/09/2026

2026 F350 6. 5

Love the new design. Light weight and excellent quality and design. Easy to install with minimal tool required and the looks are amazing. Super sleek.

Duane Verified
05/07/2026

Tonneau cover looks great and

Tonneau cover looks great and was very easy to install. It’s very easy to fold open and gives full access to the whole bed.

GoinMobile
05/01/2026

Great upgrade

I installed on a 2018 RAM 1500. The product is very sound quality and installation instructions were quite adequate. The product fits great works well and looks awesome. I purchased an open box unit, although the pricing was fair the unit was a little more banged up than I expected, poorly packaged and missing some hardware. So buyer beware of open box condition descriptions.

James R. Verified
10/08/2026

Topper

Got the cover quickly. Install was pretty easy but I did read and watch videos before install. My 11 year old grandson, he did most of the work inside the truck bed, and my son assisted. So you know it was a straight forward install. Love the topper.

Michael R. Verified
05/06/2026

Awesome Cover

This BAKFlip is the best cover Ive had on any of my trucks by far. Easily installed and gives the truck a nice clean look. Dont hesitate buy one today!

Kenneth Verified
04/28/2026

BAKFlip MX4 Tonneau Cover

I’m very pleased with the fit, finish and ease of installation. A couple of pieces were damaged in shipping and customer service replaced them quickly. The only improvement that I can suggest is a heavier duty box to ship it in.

Joel J. Verified
04/26/2026

BAKFlip Max4

Very easy install. Fits great and looks good also.

Anonymous
04/26/2026

Great cover I would purchase again.

Very easy to install, very sturdy, looks great, no keys involved, all and all I'm very happy with the cover and it's features.

Kristen W. Verified
08/21/2026

Poor quality

The first backflip we received had a divet in the panel. They sent us a new panel that had the corner cover damaged and the screw pulled out. It was for a Long bed truck and it didn’t come with full length solid rails we had to add the extra 2’ which wasn’t easy and was annoying. Since we have been using it for over a month, 4-5 of the protective foam pieces have come loose and fallen off and we have tried to put some back on but they keep falling off. Overall this seems like a very low quality truck bed cover with components that can’t hold up to hardly any use or the outdoor elements. Very disappointed in this product.

charles f. Verified
04/24/2026

It leaks

Was initially impressed with the bed cover. Appearance is great, installation was easy. But after a rain, water pools in the middle of the cover and begins to leak in the middle of the bed. Ive had numerous bed covers (roll up/soft trifold/hard trifold) and they all leak and I understand that it is unavoidable. However, other bed covers have leaked towards the cab or at the tailgate. This one leaks right in the middle of the bed. For the price I cannot and would not recommend this cover to friends/family.

Douglas B. Verified
04/20/2026

Best Value Tonneau Cover

Easy installation and very versatile tri-folding Tonneau Cover. Removes easily. Aesthetically appealing. Highly recommend.

Larry C. Verified
04/17/2026

Great Fit and Look

Excellent customer service and easy on line ordering. Packaged well and received with no damage. Easy install. Very pleased with look.

Steve K. Verified
10/08/2026

Great tonneau cover

Great tonneau cover for the money.

Anonymous
04/10/2026

Great

Fit perfect. It was easy to install

Reginald S. Verified
04/14/2026

The Best Truck Bed Cover Yet!

In 2015, I bought my first BakFlip and transferred it to my second Ram 1500. Here in 2026, I bought my third Ram and decided to get the new BakFlip design and am glad I did. Very easy to install and it took me less than 30 minutes. I love the finished look - like it's from the Ram factory. I like that the folded panels are really secured in place when driving and won't get whipped in the wind plus it leaves room for maximum cargo space. The upgraded cable system for latching and unlatching is another big plus. They really designed a great product and I recommend it over all the others out there. . . well worth the money!

Dennis M. Verified
03/30/2026

BAKFlip tonneau

Love it, easy install, great cover!

Richard M. Verified
10/08/2026

bed cover

the cover added nice look to my chevy truck

Lee A. Verified
03/05/2026

Solid

Everything I expected it to be. Same as GMs only less $. I rated medium on value because Im cheap :-). Seriously though, it was easy to install. I did it solo in about 45 min. Followed YouTube instructions from a guy that took the time to video his install. Got to love YouTube. Looks sharp. Has performed as expected. Zero issues. If you have a Sierra EV, get this cover.

Frank
04/01/2026

Love it

Installed alone in about 2 hours. One corner mia. One quick phone call and new piece sent. Absolutely love it

Ricky B. Verified
02/19/2026

The BAKFLIP MX4 hard folding GEN3 is great

I just love how it sits on my truck it makes it look very distinguished

Kevin W. Verified
05/02/2026

MX4 Gen 3

I like the cover especially because it's a hard top. There still is leakage and some parts, like the seal, seem to be fragile. Mines popped off. I have to move it a little to make it lock. If I have to use my whole truck bed, it covers my whole back window. I do like the steak flush look. I like that it easily opens with the pull down. I also like the fact you can close it with the truck bed door open or closed. Overall I like it, but for the price, definitely wish there were some things that were better.

Alan L. Verified
10/07/2026

New install

Only took me an hour to install. Great looking.

Michael F. Verified
01/18/2026

Very good

Nice product super easy to install but grab a friend its much easier. Product fits the bed nicely. And the lathes made it easy to fold up. If I had one critique I wish the cover on the Cab side was convex to match the shape of the bed on my 25 raptor. Small critique would make it perfect other than that it still gets an A+ from me.

Jeremy Verified
08/11/2026

Poor Q/A inspection

While the cover looks good the quality of parts were defective. I had to call for replacement and repair parts twice. The cable to release the lip broke due to poor workmanship. I had to replace the latch myself after only 2 weeks. This is way overpriced for having to fix it myself.

Jtmalone86
08/18/2026

Great utility, quality not as much

My wife had one of these on her 2010 nissan titan and it was perfect in every way. So when we bought a newer truck (2015 ram 2500) we wanted to get the same cover. Tonneau was shipped quickly, was packed well and had easy instructions. The fitment is perfect and the overall utility is great. I espec6like how it acts as a headache rack when fully up and out of the way. I've had this item for a year now and have had it opened and closed around 30-40 times. The wire for the section closest to the tailgate broke. Inside the latches the wire is looped and crimped on and it slid out of the crimps. So I had to buy new cable and fix it. Works like a charm now. I will say the other stock cables work well and have not broken. Other issue is the clips that hold the seal into the side of the tonneau keep popping out. They pop back in easily but it's definitely annoying and causes the seal to…

duke
09/12/2026

quiestionable longevity

I have this cover on a 2021 F250. I work in the construction industry and need to open it often. The corner pieces have fallen off and the coating doesn't hold up to medium use. The seal leak in various places. If this is something you rely on, I would consider other brands.

Logan S. Verified
11/14/2025

Looks Great but Leaks

I love the low profile look of the cover but it leaks in the corners by the cab. I even purchased some silicone putty to fill in the gaps between the bed and the cover, but it still leaks.

Alex S. Verified
08/06/2026

I am happy with the

I am happy with the product. It works well. My goal was to purchase a more heavy-duty cover, but currently it is not made for the 2026 GMC Sierra AT4 EV. If that ever changes please contact me as I most likely will be interested.

Gary C. Verified
11/13/2025

Needs Additional Latch set

Second fold from rear window needs a latch set. The joint raises and lowers after your speed reaches 70 mph and above. This can lead to water leaks at the joint. Contacted company, but would not fix problem or refund money. They said this is normal function of the cover. This problem is caused by the design of the aerodynamics of the truck with the Cab Air Deflectors. This is different from all other Chevy Trucks.

Daron N. Verified
07/23/2026

Disappointing Quality for the Price

For the price I paid, I wouldnt buy this cover again. The biggest issue is with the long-bed rails. They come in two pieces, but only include three mounting clips. Because of this, its very difficult to get the rails properly aligned during installation, and they never seem to line up quite right. The adhesive rubber bumpers have already started coming loose after being exposed to warm weather. Lastly, the cover gets extremely hot in direct sunlight. It becomes uncomfortable to touch and makes it painful to open when needed. Overall, Im disappointed. For what this cover costs, I expected better quality and a better-designed product. Now that its installed, I feel stuck with something Im not satisfied with.

Marc C. Verified
06/07/2026

Tonneau cover is nice - but damaged inside of packing

The cover went on well but once I installed it, I noticed the clip that holds the strap for locking into place in the folded position, was broken off. I found the broken piece in the packing material. The only real fix would be to send the whole cover back and I needed it for my truck. I guess I should have looked it over more closely when I removed it from the packing.

Noel M. Verified
05/07/2026

It's good, but not 100%.

It's good, but not 100%. The corners on the front have an opening where water can get in, and it's a bit hard to open.

Dave B. Verified
10/09/2025

Ok

With the longer bed this cover doesn’t allow you to transport with just one fold. Any suggestions. Also, any suggestions on making it less water resistant?

Nate Verified
07/23/2026

Leaky

This is the least weather proof cover Ive ever owned, on top of that it rattles on any pot hole or bump. The only thing this cover has going for it is the appearance.

Joseph G. Verified
07/07/2025

Clamps weren't right

The clamps don't seat well against the metal behind the cap rail plastic. So, they can't hold straight when closing the cover. I contacted support and they said to send a picture and over a week later I've gotten nothing back after additional email. Pretty disappointed that something so simple couldn't be resolved quickly. I have put backing material in place until they figure it out so I can at least use it. The tailgate seal was also not seated correctly so I had to take it off and reseat it. For such an expensive product they really aren't doing the small parts well.

Danny S. Verified
09/20/2026

Too short

Love everything about the cover except that it’s too short. It barely covers the edge of the bed at the front and just touches the tailgate. Seems about two to three inches shorter than it should be so it doesn’t keep the water out at the tailgate and it’s not very secure for theft.

Andy Verified
09/09/2026

Used bed cover

The foam was glued together and bed cover looks worn and half of the parts are missing . Took it to a place for an install and they told me this is definitely a used item. Wasted a whole day!

Jerry D. Verified
07/25/2026

Not engineered well for ridgeline

very difficult to get to fit. RETURNED. Thank you for no hassle.

Danny B. Verified
07/21/2026

1 star

Product is flimsy. You can see light escaping through the cracks from the outside. Plenty of water gets inside. Side trims are always falling off rail. Always looks dirty or faded. Side stands don’t hold up box correctly.

Dale T. Verified
06/23/2026

Hard folding

I am very unhappy with the fit. It does not allow the tail gate of my 2026 Nissan frontier to properly close. I have to position it further forward on the bed to make it work. I would not recommend this cover or the company.

Jeff S. Verified
06/16/2026

Be aware of damage and no customer support

Damaged bed cover and no help from customer servic

James I. Verified
05/16/2026

Will not fit 2025 Nissan Frontier Pro X

I like the appearance and a parent quality of the product, but it would not work on a 25 Nissan frontier the rear latches would not come down enough to latch so I had to return it. customer Service was very helpful and I had no issues so far still waiting on my refund.

Marie C. Verified
05/12/2026

Nope

It looks unfinished. The rubber molding on the sides creased up were it folds. I gave it some time n the heat to see if it would flatten and it didn’t. The corners by the cab looked unfinished. The installation of the rails was horrible, yes I did it right, and it still didn’t close and lock wo slamming it or lifting on the side rails get it to lock. For the amount of money it cost I expect much better. So I returned mine and went with another brand from another company. And am very happy now. No rubber flap edges. Easy install and locks every time. Yes: the return process was fast and easy, but I’m rating the product.

Dan C. Verified
05/11/2026

Bakflip MX4 Ram truck w/rambox

I’m very disappointed with this product. It leaks at both the front and rear, which defeats the whole purpose of having a bed cover/top in the first place. The instructions were also a major issue. I have a Ram with the RamBox bed, but the instructions provided were for a Chevy 1500. The installation is not the same, and it made the process much more frustrating than it needed to be. Had I known the product would not seal properly and that the correct truck-specific instructions would not be included, I would have chosen a different top. At this point, I honestly wish I could return it.

Ernest S. Verified
05/07/2026

Substandard Cover

After making several adjustments to maintain the cover from dismantling, I reached out to customer service but have yet to receive a call.

Jeffrey S. Verified
07/21/2026

Leaks everywhere

If you want a cover that does not leak look somewhere else. It has been installed correctly and it's still does not prevent water from entering the bed. . after a good rain the bed as water in it do not keep anything that is valuable in your bed.

Chad M.
08/29/2026

Backflip MX4 Bed cover honest feedback

First of all, I don’t like to bring bad news, that being said, here it goes. Last year 2022 in may, I received my first MX4, it looked great! I had little trouble with installing it, about 30 mins I’d say. My issue is with the overall durability or thickness the bad cover aluminum, it dents so easily. One hailstorm and it looked like a golf ball. Ugh, that was just having it for a few months. The company was receptive to my concern, and sent me a “fiberglass” one to hopefully correct the issue. The next light hailstorm and it was another golf ball. I’m not sure if they sent me another aluminum one by mistake, or their fiberglass dents vs. cracks? It’s just a lot of money to ruin the look of your otherwise tough looking truck. Sorry Bakflip, you even tried to make it right by sending me another one, and still failed. Makes me feel a little sick.

RichieT
07/07/2026

Good but not perfect

Looks good, I like that it folds all the way for full bed access. One of the bumpers for when it is fully open blew off. Still leaks water inside. Could probably use to be made a little longer for more coverage over the tail gate. I was expecting better for the money I paid for this thing. I have a cheaper one on a different truck that leaks about the same. I going to try some extra gasket in places and hope for the best.

Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question