BAKFlip MX4 hard folding tonneau cover on a silver pickup, rear panel folded forward over the closed panels
BAKFlip MX4 tonneau cover partly folded on a faded pickup with a Best Seller badge
Tonneau cover folded up to the cab with the bed loaded, captioned full bed access
View from the tailgate of the BAKFlip MX4 folded against the cab, captioned America's best-selling truck bed cover
Steel toolboxes stacked on the closed cover panels, captioned built stronger
Water splashing on the cover panel surface, captioned sealed edge-to-edge
Ghosted pickup showing the BAKFlip MX4 panels with a New and Improved badge
Close-up of the BAKFlip MX4 rail with the automatic latch outlined, captioned automatic security
Hand tightening a BAKFlip MX4 rail clamp with a ratchet, captioned easy one-person install
BAK badge on the BAKFlip MX4 rail end cap
Best-in-class warranty shield over the BAKFlip MX4 panel texture

BAKFlip MX4 Hard Folding Tonneau Cover for 2024-2025 Ford Ranger / Ranger Raptor (5'1" Bed)

$1,249.99 $1,566.99 Save $317.00
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear
Flash Sale Ends in--:--:--

Free gifts included with your order

Details
Details
Details
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
  • Guaranteed FitmentTeam-confirmed fit or money back
  • No Sales TaxZero sales tax on every order
  • 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

+1 (470) 823-2453 Email Us
Locks the moment it closes
Sealed edge to edge
Multi-layer aluminum panels
Folds to the cab, drive open Folds to the cab, drive open
One-person install
The original hard-fold cover

Features

  • Locks the moment it closes: BAK's patented auto-latch engages as each panel closes, so there is no separate locking step. BAK says the Gen 3 lock parts were re-engineered to resist forced entry better than the Gen 2. To open it, drop the tailgate and pull the release cable.
  • Sealed edge to edge: Revised EPDM rubber perimeter seals and tight-fit clamps close the gap between the cover and the bed rails, and on most trucks a dual-action tailgate seal, 13% longer than before, covers the tailgate. Drain tubes carry off water that reaches the rails. BAK's own sheet notes the cover is not airtight, so think weather-resistant, not sealed.
  • Multi-layer aluminum panels: Aluminum top panels sit over high-density polymer cores on aluminum side rails. BAK says the Gen 3 panels are 22% stronger than the original MX4, and the closed cover is rated at 400 lb, evenly distributed.
  • Folds to the cab, drive open: Fold the panels to the cab, strap the cover to the buckles at the bulkhead and drive with the bed open for tall loads. Flipped fully upright, prop rods hold it against the cab on rubber bumpers. BAK says it is the only hard fold that leaves your 3rd brake light visible in every position.
  • One-person install: Click-in clamps hold the rails to your bed rails, with no drilling on most trucks, and one person can do the job. BAK rates it at 30 minutes or less (Level 1) and says the new click-in design cuts install time by 12%.
  • The original hard-fold cover: BAK says the MX4 defined the hard-folding category and calls it America's best-selling truck bed cover. The Gen 3 version (model year 2025) sits flush with the bed rails and wears a textured matte black finish on every surface.

Description & Fitment

Here is the BAKFlip MX4 sized for the 2024-2025 Ford Ranger / Ranger Raptor with the 5'1" bed. To open it, drop the tailgate, pull the release cable and fold the panels toward the cab. BAK rates the install at 30 minutes or less, and on this truck its rails bolt through the factory clip holes with Torx screws, so there is no drilling. For reference, the box is about 60" long. BAK calls the MX4 America's best-selling truck bed cover, and the Gen 3 version adds re-engineered locks and a longer dual-action tailgate seal. Re-engineered prop rod clips hold it upright against the cab, and rubber bumpers protect the cab paint. It carries BAK's 5-year limited warranty.

Fitment & Compatibility

Ford
Years Model Bed Notes
2024-2025 Ranger 5'1" (60") —
2024-2025 Ranger Raptor 5'1" (60") —

Check your bed: measure along the bed rail from the bulkhead to the inside of the closed tailgate. This part is for the 5'1" bed on the 2024-2025 Ford Ranger / Ranger Raptor. BAK's own brands list this box at 60" long.

Not for: other bed lengths; the 5'1" bed is the only Ranger bed BAK lists for the BAKFlip MX4 on 2024-2025 trucks. 2019-2023 trucks with the same bed take BAKFlip MX4 448332. 2026-2027 trucks with the same bed take BAKFlip MX4 448352.

About BAK Industries

BAK.

BAK makes hard tonneau covers. BAK bills itself as "America's #1 truck bed cover."

The range splits into BAKFlip hard folding covers (MX4, MX4 EZ-Lift, MX4 TS, G2, F1 and Fibermax) and Revolver hard roll-ups (X2, X4s and X4 TS). The MX4 is the aluminum-panel BAKFlip that BAK calls America's best-selling truck bed cover; the MX4 TS adds T-slot rails and the MX4 EZ-Lift adds a lift-assist system.

Authorized BAK dealer. Prestige Truck is an authorized BAK dealer, so what we sell is new and genuine BAK. BAK's warranty "is nontransferable and applies to the original purchaser of the BAK product only," and BAK requires warranty registration on file or proof of original purchase (a detailed, dated receipt) for warranty service. Your Prestige Truck order receipt is that proof.

Frequently Asked Questions

Will this fit my 2024-2025 Ranger?

Yes, if it has the 5'1" bed. Measured along the floor, that box is about 60". Measure along the bed rail from the bulkhead to the closed tailgate. If you are unsure, send us your VIN and we will confirm.

My truck is right at a model-year change. Which one do I need?

This part covers the 2024-2025 Ford Ranger / Ranger Raptor. 2019-2023 trucks with the same bed take BAKFlip MX4 448332. 2026-2027 trucks with the same bed take BAKFlip MX4 448352. Go by your truck's model year, or send us your VIN.

What changed with the Gen 3 MX4?

BAK lists stronger panels (high-density polymer cores, 22% stronger than the original MX4), re-engineered lock parts that resist forced entry better than the Gen 2, revised EPDM perimeter seals and tight-fit clamps, a dual-action tailgate seal 13% longer than before, re-engineered prop rod clips, and a click-in design that it says cuts install time by 12%.

Will it keep rain and snow out of the bed?

It is built to: edge-to-edge seals and tight-fit clamps close the gap to the bed rails, and drain tubes carry off water that reaches the rails. BAK's own install sheet says the cover is not airtight, so plan on weather-resistant rather than sealed. Clear snow and ice off before you open it; that is a warranty condition too.

How much weight can it hold?

BAK rates the closed cover at 400 lb, evenly distributed. BAK's sheet also says not to drive with objects on top of the cover or tie cargo to it.

Can I drive with it folded open?

Yes. Fold it toward the cab and attach the straps to the buckles at the bulkhead, pulled snug, and you can drive with the bed open. The cover must be secured at all points while the truck is moving; that is a condition of the warranty.

Installation

Install time 30 minutes or less (BAK's figure)
DifficultyLevel 1simple installation; one person
TypeBolts through the factory clip holes, no drilling
Tools
  • a 1/2" wrench or socket and a Phillips screwdriver
  • plus scissors or a utility knife, isopropyl alcohol and T-30 Torx bit

Here's the short version. Follow BAK's install sheet (below) for your truck's exact clamp positions and settings.

  1. Seal the bulkhead. Clean the top of the bulkhead with soap and water, then isopropyl alcohol, and stick the bulkhead seal flush with its front edge, snug between the bed rails.
  2. Remove the factory clips. On each side, pry out three of the four factory plastic clips, center first and then the whole clip. They're only needed again if you take the cover off for good.
  3. Bolt the rails down. Slide three clamps into the tail end of each side rail, drain-tube end against the bulkhead, and line them up with the clip holes. Fit a Torx screw through a washer and the clamp into a nut behind the sheet metal, hand-tight. Then, starting at the front clamp with the rail pushed forward and square, press down on the rail and tighten each screw with a T-30 Torx bit to 8 ft-lb (11 Nm), holding the nut with a 1/2" wrench; work front, middle, rear. Fit the drain tubes to the front of the rails.
  4. Prep the cover. Slide the two cover retainer clamps into the track under the cab end of the cover, one per side. Peel the liner off each gasket, stick it under a buckle end, and screw the two buckle ends into the pre-drilled holes on the front header panel with the screws and nutserts. Hand-tighten only; don't use a screw gun.
  5. Set the cover in place. Lay the folded cover on the side rails at the cab end, centered between them, and turn the retainer clamps clockwise until the lock washer is snug. With the cover still folded, clean the spots for the cab bumpers with soap and water, then isopropyl alcohol, let them dry and stick the bumpers along the top edge where the cover meets the cab.
  6. Unfold, adjust and check. Unfold the cover toward the tailgate and center every panel side to side and front to back; the rear edge and tailgate seal rest on top of the tailgate with a 1/2" overlap. With a power tailgate, make sure it still works with the cover closed. Release each latch to check it engages the rails (the sheet shows how to adjust a slam latch), then re-tighten the retainer clamps. BAK's warranty asks you to re-check every clamp after your first week of driving.

Stuck on a step? Ask our install experts

What's included
  • Hard fold cover
  • Driver side rail
  • Passenger side rail
  • Bulkhead seal
  • 2 cover retainer clamps
  • 2 buckle ends
  • 4 screws
  • 4 nutserts
  • 2 gaskets
  • 6 nuts
  • 6 clamps
  • 6 washers
  • 6 Torx head screws
  • 3 D-shaped cab bumpers
  • 2 drain tubes

Specifications

BrandBAK
Part Number448342
Cover TypeHard folding
GenerationGen 3 (model year 2025)
Top PanelsAluminum over a high-density polymer core
Side RailsAluminum
FinishTextured matte black
Load Capacity400 lb, evenly distributed
LockingPatented automatic latching
SealsEPDM perimeter seals; dual-action tailgate seal on most trucks
DrainageIntegrated drain system with drain tubes
Bed Access100% when folded against the cab
3rd Brake LightVisible in every position
MountingClamp-on, no drilling on most trucks
Warranty5-year limited
Fits2024-2025 Ford Ranger / Ranger Raptor
Bed Length5'1" (60")
UPC192631018087

Warranty, shipping & returns

  • 5-year limited warranty

    BAK covers the BAKFlip MX4 against defects in materials or workmanship for five (5) years from the original date of purchase.
    • A defective cover or hardware component is repaired or replaced, at BAK's option; BAK may substitute a newer model with similar form and function.
    • It covers the original purchaser only and is not transferable. Warranty registration must be on file, or keep a detailed, dated receipt as proof of purchase; contact us for help with registration or a claim.
    • To keep it valid: clean with mild automotive soap and water only; keep the cover secured at all points while driving; check all clamps and retention parts for tightness after a week of driving after installation (or reinstallation) and now and then after that; clear snow, ice and anything else off before opening; never tow the truck from the rear with the cover on (remove and store it first).
    • Claims: get a Return Material Authorization (RMA) number from BAK before returning anything. BAK may ask for the part back postage prepaid, and shipping charges apply to a repair or replacement. A claim needs your order number, contact details, vehicle, part number, a description, the receipt and photos.
    • Not covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that is not a defect in material or workmanship. BAK does not accept returns of non-defective products once installed.

  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Order by 5 PM ET on a business day and it starts processing the same day.
    • This cover is an oversized item, so it ships by freight or as an oversized parcel.
    • Most orders arrive within 1-5 business days.
    • We email your tracking number as soon as it ships.

  • Inspect on delivery

    This cover ships in a long, heavy box. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.

  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.

What our customers say

4.6 · 5025 reviews

Photos from owners

+153
REMINGTON G. Verified
07/15/2025

Great Cover

The BAKFlip MX4 was really easy to install! Really like how you can snap the mounts into the rails and be able to slide them. Looks really good on the truck and seems like good quality.

Edito G. Verified
09/26/2026

Great tonneau cover.

The look complements my truck. It is easy to open and close, has been waterproof so far, even after a week of wind and rainstorms. It took about two hours to install including help from my neighbor.

Paul O. Verified
09/13/2026

Never Doubted

Amazing product, easy installation, reputation and quality without a doubt.

Robert C. Verified
09/10/2026

Tonneau

I love it and it makes the truck secure when I put things in the bed.

George
06/22/2025

The cover is nice easy

The cover is nice easy installation except the left /driver side both corner pieces were damaged an I've summited pick over 1month ago an haven't received replacement parts

Terrence L. Verified
09/01/2026

BAKFlip easy install

This is my second truck that I put the BAKFlip on and this one is much lighter, thinner yet stronger than the one I bought in 2010. I installed it myself in about an hour but that included reusing my old BAKFlip Tool Box so it may have been done in about 40 minutes otherwise. Looks and works great. My tools and Hunting Equipment are safe and secure with this tonneau. It’s solid!

Jonathan M. Verified
07/24/2026

Topper

Excellent price and is a great topper too.

Matt M. Verified
06/03/2026

Great Product

My brother bought one for his truck and highly recommended so I bought one too. Super easy to install and operate. Love it.

Brian B. Verified
08/11/2026

Latch broke in less than a month

Latch broke in less than a month How do I get support? I have pictures of the latch which pulled out of the cover

GARY Verified
05/30/2026

BakFlipped 4

Installed easily, had to make a few minor adjustments, compliments truck. Rubber bump guards seem to come loose in hot weather.

Robert R.
03/09/2025

I love it works really well

Really easy to use

Letteer L. Verified
05/02/2026

The best BakFlip yet

I had a first gen bakflip on a truck several years back and it was really great but a little heavy. The next truck I switched to the Gator to save a few bucks. It was a fine cover but it did leak around the tailgate and the surface faded over the five years I had it. My new truck, I went back to the BakFlip MX4. Same design (which is good) but they have managed to make it much lighter to open and close, or even if you need to remove it. It still feels just as sturdy if not even more so. I do get a little water but not bad at all and not enough to get anything wet that is in the bed. The latches and the trifold all are great with no issues. In my opinion, the best choice for the money of covers out there.

Troy T. Verified
04/30/2026

Love the Tonneau Cover

As others may have stated written installation instruction s would have been nice.

Eduardo A. Verified
03/09/2026

BAKFlip mx4

To whom ever is interested in buying the backflip these things are great makes the truck look nicer was better function

Patrick Verified
12/31/2025

The price tag justified for

The price tag justified for the best looking, highest quality bed cover I could find on the market.

Robert
08/10/2026

Very nice love it

Very nice love it

Charlie Verified
12/29/2025

Excellent build! A small criticism,

Excellent build! A small criticism, I would've liked having latches on all of the panels. Doing 3 of the 4 seems silly, but it doesn't appear to cause any issues.

Yarin R. Verified
09/05/2026

Cover , no strong.

Fit perfect, the issue I have is when you are folding and keep open the cover, the air kick back the cover, it is not strong enough to hold, should be better quality for the price I pay, looks good but I was disappointed that did not function as needs to be.

Peter H. Verified
12/06/2025

Loving it; however………

When I ordered mine one with the ability to mount the elevate rack with “T” slots was not yet available. So now I am hoping to purchase replacement rails with the “Tslots as a replacement. Otherwise it is excellent and protects everything from the weather is what I needed.

Bob W. Verified
10/07/2025

Works well and had no

Works well and had no issues.

roger Verified
09/28/2025

I like it very

I like it very

David
07/26/2026

Great cover

With a couple of extra hands for one quip operation the process of installing it was nearly a one person operation.

Brandon W. Verified
07/14/2025

Great Cover

a bit harder to have all parts fit in perfectly but eventually got it done

James Verified
07/06/2025

great product

very easy to install and has been great at keeping gear secure and dry. My Chevy has multiple drain holes so 100% dry is not reality but top has exceeded my expectations!

Feleti L. Verified
04/28/2025

Love it

Overall I love the way it looks and operates. I had a little trouble getting it to latch when I first installed it, but that was an error on my part. I would recommend this product.

Greg B. Verified
03/02/2025

Great product. Works and looks

Great product. Works and looks great! Easy installation following instructions included and online.

Virgil S.
06/30/2026

Easy install

Love my new cover. This is my second one and it is much lighter and easy to open without having to get in the bed of the truck.

Louis B. Verified
01/22/2025

Easy to install and fits

Easy to install and fits like a glove! Very happy with purchase and would recommend produce and the excellent service I received from company representative.

jerson v. Verified
01/07/2025

Awesome tonneau cover!

Yea it’s an awesome cover, very easy to install & looks great too!

Cameron J. Verified
07/16/2026

Leaks too much for price

The cover looks beautiful. Install was easy. But near the front of the bed on the right side water has a consistent drip during a med-high rain. If I was to know this leaked this much I would have bought a cheaper alternative. This review does not allow for media but I would post if I could.

John D. Verified
12/10/2024

BakFlip MX4

Fast free shipping. Directions were clear and precise. Installation was very fast and easy.

Larry S. Verified
10/25/2024

2021 Ford Ranger

Fits well and keeps cargo area clean and dry

Tammy
06/10/2026

Love my cover! Had been

Love my cover! Had been looking and was referred by friend to bakflip. Easy to install with you tube as no directions were in box.

Michael P. Verified
09/17/2024

Cover

It's awesome

Chastity H. Verified
08/04/2024

Over the top!! 🥰

Over the top!! 🥰

Gary R. Verified
06/22/2024

Backflip Tonneau cover

Looks great, very easy to install. I’ve had Tonneau covers before so was familiar how to install. Took me about 45 minutes and it was on.

Brad S. Verified
05/24/2024

MX4 Tonneau Cover

Absolutely love it. Very easy install. Great product. A huge upgrade from the vinyl cover.

Oldschool
05/22/2026

Watch a video

After watching an installation video, everything was easy.

Abel A. Verified
04/23/2024

Loved it

Loved it

Garet B. Verified
03/24/2024

Tonneau cover

Easy to install awesome product.

Troy W. Verified
02/16/2024

Easy install. High quality product

Easy install. High quality product sturdy and efficient to use. Very pleased and it does a very good job keeping water out in a carwash.

Dennis R. Verified
08/23/2026

I wish I bought the MX2 instead.

I had an MX 2 installed on my 2017 Tacoma in January 2017. When I recently bought a 2023 Tacoma I wanted the BakFlip for it. The MX 2 is so much easier to install and it aligns with no issues. I had to keep adjusting the rails to improve the fit. The right side of the cover did not close all the way; there was a 1/4 inch gap. Part of the problem was the rubber seal improperly installed at the factory. I managed to peel it back and adjust it as it should have been.

Shawnda J. Verified
01/06/2024

looks and fits great!

looks and fits great!

BRANDON
05/15/2026

Looks great

String pull system could have been designed differently, but over all I’am happy I got it.

David P. Verified
04/23/2026

Works well.

Works well. Wish the sides had better or wider water proofing trim.

Bob B. Verified
03/28/2025

BAKflip MX4

Overall, I like the top. The seal on the edge is taking a long time to lay down flat due to packing. I wish it had 2 more clamps to give more strength on the long bed rails. The rails flex too much near the support rods when using in the upright position. Not really solid unough to drive while upright.

Preston P. Verified
02/22/2025

Quality product lacks customer support

Great product, however the company support of the product leaves a lot to be desired. Two set of instructions that counteract one another and the company won’t call back to clear up the situation

Paul T. Verified
05/14/2024

Only had for short time

Only had for short time but seems to be working fine.

Anonymous
05/10/2026

Very nice cover, very easy

Very nice cover, very easy to install. Well constructed and I expect it to look good and last for years.

Jeremy W. Verified
09/09/2026

Great, but a dent on shipping

Everything was great, but the box was beat up a little. Upon opening the box, there was a small dent on the inner portion of the cover. Not big enough to return, just big enough to notice.

CONNER Verified
08/07/2026

BakFlip MX4

I’ve been wanting the BakFlip MX4 for my 17 F150 for a while and I finally broke down and bought one. It’s everything I thought it’d be. It’s has great quality, durable and can easily be installed within a couple hours by yourself, but an extra set of hands doesn’t hurt.

Jill H. Verified
10/08/2026

Perfect

Excellent product. Easy install. My boyfriend loves it.

Jeffrey P. Verified
06/20/2026

Better then expected.

Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.

Albert P. Verified
05/16/2026

Expected a bit more for the price

First, watched the online video instructions for my year mode and make prior to starting. Small item, but 1/8" shims shown in the video were not included with my purchase. Second, both rubber bumpers that support the cover when in the folded position became unattached after 6 weeks without ever having the cover in the folded position. Third, both struts that are used to lock the cover in the folded open position are constantly vibrated from their holders and then hang down getting entangled in what ever cargo is being carried. Just a matter of time before they are broken off.

Anonymous
05/01/2026

Functional and fashionable

Installed after recently buying a new truck. The product is easily installed for the average DIYr. I found the parts to be of quality manufacturing and I hope will prove to be durable for years of use. The seals seem to work very well at keeping out rain. Only noticed very little water in the bed after heavy rainstorm or even going through a car wash. I’m very happy with this product and would not hesitate to recommend it to my friends.

Richard A. Verified
06/04/2026

2026 Maverick cover

This is my third truck to install bak flip tri fold hard cover. Each one was improved and better than the last. My only issue was a wrong part was packed with mine so I had to call customer service to ship out the correct part. I think I have had this issue on the last two covers. Issue was always resolved in a professional and professional way but it is just an added cost to you and an extra step for the customer. You dont expect this from this price point.

Gregory D. Verified
10/08/2026

Great look

It installed easily, look great, and functions good.

Paul H. Verified
05/18/2026

Sturdy, Looks great

Replaced a soft cover with this. So far its been great. Gear is secure. Easy install.

Bob K. Verified
05/16/2026

What a waste of time

First box came without hardware. Second box came with everything but was not straight with one side being longer than the other. They kept asking me for pictures and measurements till I had enough and sent it back for a full refund. Will never buy anything from them again. The funny thing is ,this is the second time they asked me to do a review on their junk.

Anonymous
04/13/2026

Nice cover, would purchase again.

Nice cover, would purchase again.

Sidney C. Verified
10/08/2026

BAKFlip Excellence

I have purchased the BAKFlip MX-4 for 2 prior pickups and have been very pleased with the appearance, fit, materials, and workmanship. Thank you.

William L. Verified
05/14/2026

Better Than OEM with easy install

The Ford Maverick factory options are fine but the BAKFlip is heavier duty. The installation was easy and took an hour but I have installed one on my F350 previously. It may take a little longer for someone with no experience installing a bed cover. Instruction are easy to follow. The BAKFlip is popular so there are excellent videos of step by step instruction online. An advantage of the BAKFlip is it is more secure than a regular cover. It’s going to be hard for someone to break into my bed and steal anything.

Michael F. Verified
05/09/2026

2026 F350 6. 5

Love the new design. Light weight and excellent quality and design. Easy to install with minimal tool required and the looks are amazing. Super sleek.

Duane Verified
05/07/2026

Tonneau cover looks great and

Tonneau cover looks great and was very easy to install. It’s very easy to fold open and gives full access to the whole bed.

Anonymous
03/25/2026

The BakFlip MX4 Tonneau Cover

The BakFlip MX4 Tonneau Cover was Easy to Install!

Kristen W. Verified
08/21/2026

Poor quality

The first backflip we received had a divet in the panel. They sent us a new panel that had the corner cover damaged and the screw pulled out. It was for a Long bed truck and it didn’t come with full length solid rails we had to add the extra 2’ which wasn’t easy and was annoying. Since we have been using it for over a month, 4-5 of the protective foam pieces have come loose and fallen off and we have tried to put some back on but they keep falling off. Overall this seems like a very low quality truck bed cover with components that can’t hold up to hardly any use or the outdoor elements. Very disappointed in this product.

Michael R. Verified
05/06/2026

Awesome Cover

This BAKFlip is the best cover Ive had on any of my trucks by far. Easily installed and gives the truck a nice clean look. Dont hesitate buy one today!

Kenneth Verified
04/28/2026

BAKFlip MX4 Tonneau Cover

I’m very pleased with the fit, finish and ease of installation. A couple of pieces were damaged in shipping and customer service replaced them quickly. The only improvement that I can suggest is a heavier duty box to ship it in.

Joel J. Verified
04/26/2026

BAKFlip Max4

Very easy install. Fits great and looks good also.

James R. Verified
10/08/2026

Topper

Got the cover quickly. Install was pretty easy but I did read and watch videos before install. My 11 year old grandson, he did most of the work inside the truck bed, and my son assisted. So you know it was a straight forward install. Love the topper.

Christine S.
02/18/2026

Perfect

Easy to install & was just what I ordered

charles f. Verified
04/24/2026

It leaks

Was initially impressed with the bed cover. Appearance is great, installation was easy. But after a rain, water pools in the middle of the cover and begins to leak in the middle of the bed. Ive had numerous bed covers (roll up/soft trifold/hard trifold) and they all leak and I understand that it is unavoidable. However, other bed covers have leaked towards the cab or at the tailgate. This one leaks right in the middle of the bed. For the price I cannot and would not recommend this cover to friends/family.

Douglas B. Verified
04/20/2026

Best Value Tonneau Cover

Easy installation and very versatile tri-folding Tonneau Cover. Removes easily. Aesthetically appealing. Highly recommend.

Steve K. Verified
10/08/2026

Great tonneau cover

Great tonneau cover for the money.

Larry C. Verified
04/17/2026

Great Fit and Look

Excellent customer service and easy on line ordering. Packaged well and received with no damage. Easy install. Very pleased with look.

Anonymous
02/04/2026

Love this product

The backflip was easy to install and keeps on money valuables safe in the bed of the truck. Plus it looks great too.

Reginald S. Verified
04/14/2026

The Best Truck Bed Cover Yet!

In 2015, I bought my first BakFlip and transferred it to my second Ram 1500. Here in 2026, I bought my third Ram and decided to get the new BakFlip design and am glad I did. Very easy to install and it took me less than 30 minutes. I love the finished look - like it's from the Ram factory. I like that the folded panels are really secured in place when driving and won't get whipped in the wind plus it leaves room for maximum cargo space. The upgraded cable system for latching and unlatching is another big plus. They really designed a great product and I recommend it over all the others out there. . . well worth the money!

Kevin W. Verified
05/02/2026

MX4 Gen 3

I like the cover especially because it's a hard top. There still is leakage and some parts, like the seal, seem to be fragile. Mines popped off. I have to move it a little to make it lock. If I have to use my whole truck bed, it covers my whole back window. I do like the steak flush look. I like that it easily opens with the pull down. I also like the fact you can close it with the truck bed door open or closed. Overall I like it, but for the price, definitely wish there were some things that were better.

Richard M. Verified
10/08/2026

bed cover

the cover added nice look to my chevy truck

Dennis M. Verified
03/30/2026

BAKFlip tonneau

Love it, easy install, great cover!

Jeremy Verified
08/11/2026

Poor Q/A inspection

While the cover looks good the quality of parts were defective. I had to call for replacement and repair parts twice. The cable to release the lip broke due to poor workmanship. I had to replace the latch myself after only 2 weeks. This is way overpriced for having to fix it myself.

Jtmalone86
08/18/2026

Great utility, quality not as much

My wife had one of these on her 2010 nissan titan and it was perfect in every way. So when we bought a newer truck (2015 ram 2500) we wanted to get the same cover. Tonneau was shipped quickly, was packed well and had easy instructions. The fitment is perfect and the overall utility is great. I espec6like how it acts as a headache rack when fully up and out of the way. I've had this item for a year now and have had it opened and closed around 30-40 times. The wire for the section closest to the tailgate broke. Inside the latches the wire is looped and crimped on and it slid out of the crimps. So I had to buy new cable and fix it. Works like a charm now. I will say the other stock cables work well and have not broken. Other issue is the clips that hold the seal into the side of the tonneau keep popping out. They pop back in easily but it's definitely annoying and causes the seal to…

duke
09/12/2026

quiestionable longevity

I have this cover on a 2021 F250. I work in the construction industry and need to open it often. The corner pieces have fallen off and the coating doesn't hold up to medium use. The seal leak in various places. If this is something you rely on, I would consider other brands.

Logan S. Verified
11/14/2025

Looks Great but Leaks

I love the low profile look of the cover but it leaks in the corners by the cab. I even purchased some silicone putty to fill in the gaps between the bed and the cover, but it still leaks.

Alex S. Verified
08/06/2026

I am happy with the

I am happy with the product. It works well. My goal was to purchase a more heavy-duty cover, but currently it is not made for the 2026 GMC Sierra AT4 EV. If that ever changes please contact me as I most likely will be interested.

Gary C. Verified
11/13/2025

Needs Additional Latch set

Second fold from rear window needs a latch set. The joint raises and lowers after your speed reaches 70 mph and above. This can lead to water leaks at the joint. Contacted company, but would not fix problem or refund money. They said this is normal function of the cover. This problem is caused by the design of the aerodynamics of the truck with the Cab Air Deflectors. This is different from all other Chevy Trucks.

Daron N. Verified
07/23/2026

Disappointing Quality for the Price

For the price I paid, I wouldnt buy this cover again. The biggest issue is with the long-bed rails. They come in two pieces, but only include three mounting clips. Because of this, its very difficult to get the rails properly aligned during installation, and they never seem to line up quite right. The adhesive rubber bumpers have already started coming loose after being exposed to warm weather. Lastly, the cover gets extremely hot in direct sunlight. It becomes uncomfortable to touch and makes it painful to open when needed. Overall, Im disappointed. For what this cover costs, I expected better quality and a better-designed product. Now that its installed, I feel stuck with something Im not satisfied with.

Marc C. Verified
06/07/2026

Tonneau cover is nice - but damaged inside of packing

The cover went on well but once I installed it, I noticed the clip that holds the strap for locking into place in the folded position, was broken off. I found the broken piece in the packing material. The only real fix would be to send the whole cover back and I needed it for my truck. I guess I should have looked it over more closely when I removed it from the packing.

Noel M. Verified
05/07/2026

It's good, but not 100%.

It's good, but not 100%. The corners on the front have an opening where water can get in, and it's a bit hard to open.

Dave B. Verified
10/09/2025

Ok

With the longer bed this cover doesn’t allow you to transport with just one fold. Any suggestions. Also, any suggestions on making it less water resistant?

Kristyn Verified
03/18/2026

Easy install, nice looking

This tonneau cover was even nicer looking than I thought it would be. Super streamlined and matches my Rhino Lining bedliner somehow. The only complaint is that I installed it three weeks ago and the adhesive foam strips are peeling up already. The truck is garage stored and it’s summer so it hasn’t been in the elements yet.

Garrett N. Verified
03/14/2026

2026 gmc Sierra AT4X 6. 6L diesel

I installed in myself. Took me 5 hours the only struggle I had was reconnecting fuel lines. Only thing was I wish it had the brackets from the fuel pump to where the connectors end.

David P. Verified
02/07/2026

Part Installed Incorrectly

The part that the prop connects to, was installed upside down. I cannot completely open my cover securely.

David
06/01/2026

MX4 Review

I was shipped a damaged product but was able to ultimately make it work. The shipping box was not damaged as it appeared the part was already damaged when packaged and shipped. Shows lack of quality control.

Nate Verified
07/23/2026

Leaky

This is the least weather proof cover Ive ever owned, on top of that it rattles on any pot hole or bump. The only thing this cover has going for it is the appearance.

Joseph G. Verified
07/07/2025

Clamps weren't right

The clamps don't seat well against the metal behind the cap rail plastic. So, they can't hold straight when closing the cover. I contacted support and they said to send a picture and over a week later I've gotten nothing back after additional email. Pretty disappointed that something so simple couldn't be resolved quickly. I have put backing material in place until they figure it out so I can at least use it. The tailgate seal was also not seated correctly so I had to take it off and reseat it. For such an expensive product they really aren't doing the small parts well.

Danny S. Verified
09/20/2026

Too short

Love everything about the cover except that it’s too short. It barely covers the edge of the bed at the front and just touches the tailgate. Seems about two to three inches shorter than it should be so it doesn’t keep the water out at the tailgate and it’s not very secure for theft.

Andy Verified
09/09/2026

Used bed cover

The foam was glued together and bed cover looks worn and half of the parts are missing . Took it to a place for an install and they told me this is definitely a used item. Wasted a whole day!

Jerry D. Verified
07/25/2026

Not engineered well for ridgeline

very difficult to get to fit. RETURNED. Thank you for no hassle.

Danny B. Verified
07/21/2026

1 star

Product is flimsy. You can see light escaping through the cracks from the outside. Plenty of water gets inside. Side trims are always falling off rail. Always looks dirty or faded. Side stands don’t hold up box correctly.

Dale T. Verified
06/23/2026

Hard folding

I am very unhappy with the fit. It does not allow the tail gate of my 2026 Nissan frontier to properly close. I have to position it further forward on the bed to make it work. I would not recommend this cover or the company.

Jeff S. Verified
06/16/2026

Be aware of damage and no customer support

Damaged bed cover and no help from customer servic

James I. Verified
05/16/2026

Will not fit 2025 Nissan Frontier Pro X

I like the appearance and a parent quality of the product, but it would not work on a 25 Nissan frontier the rear latches would not come down enough to latch so I had to return it. customer Service was very helpful and I had no issues so far still waiting on my refund.

Marie C. Verified
05/12/2026

Nope

It looks unfinished. The rubber molding on the sides creased up were it folds. I gave it some time n the heat to see if it would flatten and it didn’t. The corners by the cab looked unfinished. The installation of the rails was horrible, yes I did it right, and it still didn’t close and lock wo slamming it or lifting on the side rails get it to lock. For the amount of money it cost I expect much better. So I returned mine and went with another brand from another company. And am very happy now. No rubber flap edges. Easy install and locks every time. Yes: the return process was fast and easy, but I’m rating the product.

Dan C. Verified
05/11/2026

Bakflip MX4 Ram truck w/rambox

I’m very disappointed with this product. It leaks at both the front and rear, which defeats the whole purpose of having a bed cover/top in the first place. The instructions were also a major issue. I have a Ram with the RamBox bed, but the instructions provided were for a Chevy 1500. The installation is not the same, and it made the process much more frustrating than it needed to be. Had I known the product would not seal properly and that the correct truck-specific instructions would not be included, I would have chosen a different top. At this point, I honestly wish I could return it.

Ernest S. Verified
05/07/2026

Substandard Cover

After making several adjustments to maintain the cover from dismantling, I reached out to customer service but have yet to receive a call.

Jeffrey S. Verified
07/21/2026

Leaks everywhere

If you want a cover that does not leak look somewhere else. It has been installed correctly and it's still does not prevent water from entering the bed. . after a good rain the bed as water in it do not keep anything that is valuable in your bed.

Chad M.
08/29/2026

Backflip MX4 Bed cover honest feedback

First of all, I don’t like to bring bad news, that being said, here it goes. Last year 2022 in may, I received my first MX4, it looked great! I had little trouble with installing it, about 30 mins I’d say. My issue is with the overall durability or thickness the bad cover aluminum, it dents so easily. One hailstorm and it looked like a golf ball. Ugh, that was just having it for a few months. The company was receptive to my concern, and sent me a “fiberglass” one to hopefully correct the issue. The next light hailstorm and it was another golf ball. I’m not sure if they sent me another aluminum one by mistake, or their fiberglass dents vs. cracks? It’s just a lot of money to ruin the look of your otherwise tough looking truck. Sorry Bakflip, you even tried to make it right by sending me another one, and still failed. Makes me feel a little sick.

RichieT
07/07/2026

Good but not perfect

Looks good, I like that it folds all the way for full bed access. One of the bumpers for when it is fully open blew off. Still leaks water inside. Could probably use to be made a little longer for more coverage over the tail gate. I was expecting better for the money I paid for this thing. I have a cheaper one on a different truck that leaks about the same. I going to try some extra gasket in places and hope for the best.

Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question