Jaime
Verified
06/24/2025
Bakflip
Absolutely love it but too pricey
BAKFlip MX4 Hard Folding Tonneau Cover for 2024-2026 Chevrolet Silverado EV / GMC Sierra EV (5'11" Bed)
$1,299.99
Regular price
$1,629.99
Save $330.00
Verify fitment with your vehicle
GO
Clear
Free gifts included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
See it on a truck
Locks the moment it closes
Sealed edge to edge
Multi-layer aluminum panels
Folds to the cab, drive open
One-person install
The original hard-fold cover
Features
- Locks the moment it closes: BAK's patented auto-latch engages as each panel closes, so there is no separate locking step. BAK says the Gen 3 lock parts were re-engineered to resist forced entry better than the Gen 2. To open it, drop the tailgate and pull the release cable.
- Sealed edge to edge: Revised EPDM rubber perimeter seals and tight-fit clamps close the gap between the cover and the bed rails, and on most trucks a dual-action tailgate seal, 13% longer than before, covers the tailgate. Drain tubes carry off water that reaches the rails. BAK's own sheet notes the cover is not airtight, so think weather-resistant, not sealed.
- Multi-layer aluminum panels: Aluminum top panels sit over high-density polymer cores on aluminum side rails. BAK says the Gen 3 panels are 22% stronger than the original MX4, and the closed cover is rated at 400 lb, evenly distributed.
- Folds to the cab, drive open: Fold the panels to the cab, strap the cover to the buckles at the bulkhead and drive with the bed open for tall loads. Flipped fully upright, prop rods hold it against the cab on rubber bumpers. BAK says it is the only hard fold that leaves your 3rd brake light visible in every position.
- One-person install: Click-in clamps hold the rails to your bed rails, with no drilling on most trucks, and one person can do the job. BAK rates it at 30 minutes or less (Level 1) and says the new click-in design cuts install time by 12%.
- The original hard-fold cover: BAK says the MX4 defined the hard-folding category and calls it America's best-selling truck bed cover. The Gen 3 version (model year 2025) sits flush with the bed rails and wears a textured matte black finish on every surface.
Description & Fitment
If you drive a 2024-2026 Chevy Silverado EV / GMC Sierra EV with the 5'11" bed, this BAKFlip MX4 is cut for it. Re-engineered prop rod clips hold it upright against the cab, and rubber bumpers protect the cab paint. The textured matte black cover sits flush with the bed rails and is rated at 400 lb spread evenly. BAK calls the MX4 America's best-selling truck bed cover, and the Gen 3 version adds re-engineered locks and a longer dual-action tailgate seal. Installation is a Level 1 job by BAK's rating: it clamps to the bed caps with no drilling, and the drain hoses run through the factory drain plugs. BAK's 5-year limited warranty covers it from the original purchase date.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2024-2026 | Silverado EV | 5'11" | — |
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2024-2026 | Sierra EV | 5'11" | — |
Check your bed: measure along the bed rail from the bulkhead to the inside of the closed tailgate. This part is for the 5'11" bed on the 2024-2026 Chevy Silverado EV / GMC Sierra EV. BAK lists the bed by that label and publishes no inch figure for it.
Not for: other bed lengths; the 5'11" bed is the only Silverado EV/Sierra EV bed BAK lists for the BAKFlip MX4 on 2024-2026 trucks.
About BAK Industries
BAK.
BAK makes hard tonneau covers. BAK bills itself as "America's #1 truck bed cover."
The range splits into BAKFlip hard folding covers (MX4, MX4 EZ-Lift, MX4 TS, G2, F1 and Fibermax) and Revolver hard roll-ups (X2, X4s and X4 TS). The MX4 is the aluminum-panel BAKFlip that BAK calls America's best-selling truck bed cover; the MX4 TS adds T-slot rails and the MX4 EZ-Lift adds a lift-assist system.
Authorized BAK dealer. Prestige Truck is an authorized BAK dealer, so what we sell is new and genuine BAK. BAK's warranty "is nontransferable and applies to the original purchaser of the BAK product only," and BAK requires warranty registration on file or proof of original purchase (a detailed, dated receipt) for warranty service. Your Prestige Truck order receipt is that proof.
Frequently Asked Questions
Will this fit my 2024-2026 Silverado EV/Sierra EV?
Yes, if it has the 5'11" bed. Measure along the bed rail from the bulkhead to the closed tailgate. If you are unsure, send us your VIN and we will confirm.
How do I check my Silverado EV/Sierra EV bed length?
Measure along the top of the bed rail from the bulkhead to the inside of the closed tailgate. This version is for the 5'11" bed. If your truck's box is a different length, it needs a different part; send us your VIN and we will check.
What changed with the Gen 3 MX4?
BAK lists stronger panels (high-density polymer cores, 22% stronger than the original MX4), re-engineered lock parts that resist forced entry better than the Gen 2, revised EPDM perimeter seals and tight-fit clamps, a dual-action tailgate seal 13% longer than before, re-engineered prop rod clips, and a click-in design that it says cuts install time by 12%.
Will it keep rain and snow out of the bed?
It is built to: edge-to-edge seals and tight-fit clamps close the gap to the bed rails, and drain tubes carry off water that reaches the rails. BAK's own install sheet says the cover is not airtight, so plan on weather-resistant rather than sealed. Clear snow and ice off before you open it; that is a warranty condition too.
How much weight can it hold?
BAK rates the closed cover at 400 lb, evenly distributed. BAK's sheet also says not to drive with objects on top of the cover or tie cargo to it.
Can I drive with it folded open?
Yes. Fold it toward the cab and attach the straps to the buckles at the bulkhead, pulled snug, and you can drive with the bed open. The cover must be secured at all points while the truck is moving; that is a condition of the warranty.
Installation
Install time
30 minutes or less (BAK's figure)
DifficultyLevel 1simple installation; one person
TypeClamp-on, no drilling
Tools
- a Phillips screwdriver and a 1/2" wrench or socket
- plus scissors or a utility knife, isopropyl alcohol, ratchet or wrench set and 9/16" wrench or socket
Here's the short version. Follow BAK's install sheet (below) for your truck's exact clamp positions and settings.
- Set the side rails. With the tailgate open, angle each rail's slotted bracket all the way forward to the bulkhead, then rotate the rear of the rail down onto the bed cap. It should sit flat and level.
- Seal the bulkhead. Clean the spot with soap and water and stick the bulkhead seal at the edge of the bed opening, as close to the inside of the bed as possible. Trim it to leave a 1/8"-1/4" gap to the rail so water can run into the rail's drainage.
- Clamp the rails. Hand-tighten one clamp under the rail as far forward as it goes, then fit the others at the rear and center. With a 9/16" wrench or socket, tighten each clamp until snug plus another 1/2 turn (about 10 ft-lb), pressing the rail down so it sits flush on the bed cap and seals. Make sure the clamp teeth fully engage the rail's ribs and no clamp interferes with bed components. Repeat on the other side.
- Prep the cover. Fit a header guide retainer and a header guide into each rail track on the underside of the cover, then screw the two buckle ends into the pre-drilled holes on the front header panel with the machine screws and nutserts.
- Set and lock the cover. With a helper, set the folded cover on the rails at the front of the bed. Push each header guide outward to the rail and its retainer against it, then tighten the retainer bolt with a 1/2" wrench or socket until snug plus another 1/2 turn (about 10 ft-lb). Fit the hose clips, cut an X into each drain plug and route the drain hoses through it.
- Unfold and check. Unfold the cover toward the tailgate and check it sits square between the rails. Make sure the tailgate still works and the seal lines up: the first fin and half of the middle fin of the tailgate seal should engage the tailgate, with the rear edge of the cover resting on top of it.
Stuck on a step?
What's included
- Passenger side rail
- Driver side rail
- Hard fold cover
- 6 clamps
- 4 header guides
- 4 header guide retainers
- 2 buckle ends
- 4 nutserts
- 4 screws
- 2 drain tubes
- 2 hose clips
- Bulkhead seal
Specifications
| Brand | BAK |
|---|---|
| Part Number | 448147 |
| Cover Type | Hard folding |
| Generation | Gen 3 (model year 2025) |
| Top Panels | Aluminum over a high-density polymer core |
| Side Rails | Aluminum |
| Finish | Textured matte black |
| Load Capacity | 400 lb, evenly distributed |
| Locking | Patented automatic latching |
| Seals | EPDM perimeter seals; dual-action tailgate seal on most trucks |
| Drainage | Integrated drain system with drain tubes |
| Bed Access | 100% when folded against the cab |
| 3rd Brake Light | Visible in every position |
| Mounting | Clamp-on, no drilling on most trucks |
| Warranty | 5-year limited |
| Fits | 2024-2026 Chevy Silverado EV / GMC Sierra EV |
| Bed Length | 5'11" |
| UPC | 192631049098 |
Warranty, shipping & returns
-
5-year limited warranty
BAK covers the BAKFlip MX4 against defects in materials or workmanship for five (5) years from the original date of purchase.- A defective cover or hardware component is repaired or replaced, at BAK's option; BAK may substitute a newer model with similar form and function.
- It covers the original purchaser only and is not transferable. Warranty registration must be on file, or keep a detailed, dated receipt as proof of purchase; contact us for help with registration or a claim.
- To keep it valid: clean with mild automotive soap and water only; keep the cover secured at all points while driving; check all clamps and retention parts for tightness after a week of driving after installation (or reinstallation) and now and then after that; clear snow, ice and anything else off before opening; never tow the truck from the rear with the cover on (remove and store it first).
- Claims: get a Return Material Authorization (RMA) number from BAK before returning anything. BAK may ask for the part back postage prepaid, and shipping charges apply to a repair or replacement. A claim needs your order number, contact details, vehicle, part number, a description, the receipt and photos.
- Not covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that is not a defect in material or workmanship. BAK does not accept returns of non-defective products once installed.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- This cover is an oversized item, so it ships by freight or as an oversized parcel.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
This cover ships in a long, heavy box. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.
What our customers say
4.6 · 5025 reviews
Photos from owners
+175
Bob G.
Verified
10/06/2026
Excellent product/Super fast shipping
I have had 4 other BakFlip covers so when I got a new truck, there wasn't any thought about WHAT I wanted because I had been so pleased with the covers on my previous vehicles. This one was shipped immediately and I received it a couple days after purchasing.
Andrew M.
Verified
09/08/2026
Mx4 tonneau
Great shipping, great product, easy installation.
Kirk
Verified
08/17/2026
Love it! Awesome quality!! Highly
Love it! Awesome quality!! Highly recommend!!
JohnnyGrant
06/14/2026
THE BEST
It simply is the Best hard folding Top. Easy to install with a little know how. Stays looking good with very little up keep for years. I have recently put the same model on my Brand new truck.
Dennis A.
Verified
06/12/2026
No difficulties installing
Fairly easy, but not 30 minutes.
Deborah A.
Verified
02/20/2026
New Truck, new tonneau cover
We added this accessory to our new 2025 GMC AT4 and it looks like it came with the truck. I have had the roll up tonneau cover and this is so much easier to fold back and attached.
John
Verified
01/30/2026
Very satisfied with this cover.
I was looking to get a metal folding bed cover for my truck to securely store stuff. After researching, this one came highly rated. It is dead simple to install. Easily a one beer task. But you might want two just to be on the safe side. It does a pretty good job of keeping the rain out. I only noticed two little spots after a recent rainstorm. It also looks great on my truck.
Brian B.
Verified
08/11/2026
Latch broke in less than a month
Latch broke in less than a month How do I get support? I have pictures of the latch which pulled out of the cover
Karl C.
Verified
12/19/2025
Great so far
Easy to install, seems sturdy, easy to open and close. There is only a little water in the bed at the very rear.
TheSapper
06/04/2026
BackFlip
Install was simple. Security is unbeatable. When flipped up it will interfere with the review camera if the rides aren’t pushed way down and super tight.
Todor
Verified
10/06/2025
Truck cover
Good cover overall, super easy to install and looks great. If I had to buy another one I’d buy the same thing.
Diego
Verified
09/15/2025
Works as advertised, good looking
Works as advertised, good looking product. Go through car wash and no water gets in.
Charles
Verified
07/24/2025
Ram2500
Great value looks good easy to use. Instructions were a little hard to follow but install was still easy
Thomas R.
Verified
05/14/2025
MX4 Review
Nice product well made and Fairly easy to install but a couple of minor issues during installation.
MarkC
05/01/2026
Easy Install & Looks good
Installation is very simple and straight forward. My only ask would be to give some dimension of how much the unit should overhang on the tail gate.
Michael F.
Verified
01/15/2025
It is not being installed
It is not being installed till next week
Yarin R.
Verified
09/05/2026
Cover , no strong.
Fit perfect, the issue I have is when you are folding and keep open the cover, the air kick back the cover, it is not strong enough to hold, should be better quality for the price I pay, looks good but I was disappointed that did not function as needs to be.
Daniel E.
Verified
12/16/2024
Sleek and super easy to use
I had a previous tonneau cover my truck that was super heavy and hard to get to open. After much research I chose this one and I’m glad I did. The install was super simple, took me about 20 minutes and the cover was light enough to install it myself. Now my wife has zero issues opening this one. Not to mention the fact it sits level with the top of the bed makes it look amazing as well.
Christopher B.
Verified
11/28/2024
Very pleased.
Easy install - looks great - no leaks!
Glen B.
Verified
11/09/2024
MX4
Best Tonneau cover I've ever had. Love it!!! Very simple to put on and doesn't take long. Followed instructions, Put the rails on then the cover and it fit perfectly right off the bat. I highly recommend it to all truck owners. Keeps my supplies dry and safe. Don't think about it like I did, just decide and get it. Dr. Glen R. Burford
Robert
08/06/2026
New truck tonneau
2024 GMC Denali Ultimate 2500HD Had a BAK cover on my previous truck, a 2021 Sierra 1500 SLT as a dealler installed option. I loved the features of the BAK brand and it suited my needs perfectly, but was very heavy. When I got my new truck I researched and found the MX4 series cover to be considerably lighter. I need the cover to protect the 5th wheel hitch when not towing and the lighter weight cover is easier to fold.
Lee M.
Verified
09/25/2024
Great buying experience, high quality
Great buying experience, high quality cover, easy install
Robert H.
Verified
08/23/2024
Bed cover
This is a great item to cover the back of the truck. Installation was straight forward with little effort than getting in the bed of the truck to clamp on the rails. Fold it out and close the tail gate and your done.
Joe V.
Verified
07/13/2024
Secure truck bed cover
Better than my original one on the 1 ton truck. Wife says it’s much lighter and easier to open and close.
Martin K.
Verified
06/02/2024
Great product! And was a
Great product! And was a easy install
jesusRodriguez
02/27/2026
Good
excellent product and fully reliable for better security for your tools. Everything was totally sealed and also the shipment was fast. I recommend it.
John R.
Verified
04/05/2024
Really nice addition to my
Really nice addition to my new truck. I love it, just one thing like other reviews said you get just a little tiny spot of water but not enough to worry about. I drove it through a massive downpour coming home from Las Vegas two weeks ago and when I opened up the bed to get my luggage out I was amazed at how well it kept the moisture out.
Gary H.
Verified
03/01/2024
Great product
Great delivery-easy to install-so far this has been a quality product.
Cameron J.
Verified
07/16/2026
Leaks too much for price
The cover looks beautiful. Install was easy. But near the front of the bed on the right side water has a consistent drip during a med-high rain. If I was to know this leaked this much I would have bought a cheaper alternative. This review does not allow for media but I would post if I could.
Danielle H.
Verified
01/17/2024
The best bed cover by far!
We’ve owned quite a few trucks over the years and the BakFlip is the most efficient that we’ve found yet!
Matt S.
Verified
10/02/2026
Nice cover
I am pleased with the quality, ease of installation and appearance of my Bak cover. I chose not to drill bigger holes for the drain. Had I done this I think might would get almost no water under the cover. Even so, very little moisture gets in.
Anonymous
10/30/2025
Excellent
I love the versatility,the fit and look of the cover.
Dan D.
Verified
07/13/2025
Good but had a peice fall off already
Cover is good overall. The instructions could be clearer on the clamping the rails down section. Overall it looks good. However I had a bumper peice fall off already. The one that sits flush on top of the cover by the cab window when not in use. Hopefully it lasts a long time.
Duane K.
Verified
02/22/2025
Last fold interferes with camera
Last fold interferes with camera on stop light. Called and they said it was designed that way. Otherwise great
William S.
Verified
12/07/2024
Backflip MX4
Product is great. Only issue is one section of the weather seal on the sides has not laid down flat. It was packed in the box odd, and is partially raised and would allow rain to get in.
Jeff R.
Verified
06/30/2024
Solid Bed Cover
Installed MX4 Bakflip cover on my 2024 Chevy Trail Boss. Overall I am satisfied with function, appearance, fit, and operational features as a non-OEM accessory. Did not want to drill through bed for track drain tubes so did not use. Minimal water penetration when run through wash so not a major issue. Bed rail track clamps are a good design but do not result in a flush fit. Probably would need to drill and bolt track to bed rail to achieve a perfect right angle fit.
Christopher B.
01/30/2025
BAKFlip MX4 Tonneau
Fit very nicely on my 2019 Chevy Silverado! Easy installation.
Jill H.
Verified
10/08/2026
Perfect
Excellent product. Easy install. My boyfriend loves it.
Jeremy W.
Verified
09/09/2026
Great, but a dent on shipping
Everything was great, but the box was beat up a little. Upon opening the box, there was a small dent on the inner portion of the cover. Not big enough to return, just big enough to notice.
CONNER
Verified
08/07/2026
BakFlip MX4
I’ve been wanting the BakFlip MX4 for my 17 F150 for a while and I finally broke down and bought one. It’s everything I thought it’d be. It’s has great quality, durable and can easily be installed within a couple hours by yourself, but an extra set of hands doesn’t hurt.
Dennis R.
Verified
08/23/2026
I wish I bought the MX2 instead.
I had an MX 2 installed on my 2017 Tacoma in January 2017. When I recently bought a 2023 Tacoma I wanted the BakFlip for it. The MX 2 is so much easier to install and it aligns with no issues. I had to keep adjusting the rails to improve the fit. The right side of the cover did not close all the way; there was a 1/4 inch gap. Part of the problem was the rubber seal improperly installed at the factory. I managed to peel it back and adjust it as it should have been.
Jeffrey P.
Verified
06/20/2026
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
Dan
07/27/2026
Great cover
Nice cover that keeps the water out in the wet pnw.
Richard A.
Verified
06/04/2026
2026 Maverick cover
This is my third truck to install bak flip tri fold hard cover. Each one was improved and better than the last. My only issue was a wrong part was packed with mine so I had to call customer service to ship out the correct part. I think I have had this issue on the last two covers. Issue was always resolved in a professional and professional way but it is just an added cost to you and an extra step for the customer. You dont expect this from this price point.
Paul H.
Verified
05/18/2026
Sturdy, Looks great
Replaced a soft cover with this. So far its been great. Gear is secure. Easy install.
Bob K.
Verified
05/16/2026
What a waste of time
First box came without hardware. Second box came with everything but was not straight with one side being longer than the other. They kept asking me for pictures and measurements till I had enough and sent it back for a full refund. Will never buy anything from them again. The funny thing is ,this is the second time they asked me to do a review on their junk.
Gregory D.
Verified
10/08/2026
Great look
It installed easily, look great, and functions good.
Jeff
06/28/2026
Great Cover!
I've had the BAKFlip MX4 cover on my truck for a few weeks now, and it's a solid product. Easy installation, high quailty, and it works great!
William L.
Verified
05/14/2026
Better Than OEM with easy install
The Ford Maverick factory options are fine but the BAKFlip is heavier duty. The installation was easy and took an hour but I have installed one on my F350 previously. It may take a little longer for someone with no experience installing a bed cover. Instruction are easy to follow. The BAKFlip is popular so there are excellent videos of step by step instruction online. An advantage of the BAKFlip is it is more secure than a regular cover. It’s going to be hard for someone to break into my bed and steal anything.
Michael F.
Verified
05/09/2026
2026 F350 6. 5
Love the new design. Light weight and excellent quality and design. Easy to install with minimal tool required and the looks are amazing. Super sleek.
Sidney C.
Verified
10/08/2026
BAKFlip Excellence
I have purchased the BAKFlip MX-4 for 2 prior pickups and have been very pleased with the appearance, fit, materials, and workmanship. Thank you.
Duane
Verified
05/07/2026
Tonneau cover looks great and
Tonneau cover looks great and was very easy to install. It’s very easy to fold open and gives full access to the whole bed.
Albert P.
Verified
05/16/2026
Expected a bit more for the price
First, watched the online video instructions for my year mode and make prior to starting. Small item, but 1/8" shims shown in the video were not included with my purchase. Second, both rubber bumpers that support the cover when in the folded position became unattached after 6 weeks without ever having the cover in the folded position. Third, both struts that are used to lock the cover in the folded open position are constantly vibrated from their holders and then hang down getting entangled in what ever cargo is being carried. Just a matter of time before they are broken off.
James M.
06/01/2026
BAKFlip MX4
Great product, best on the market. I highly recommend this MX4 …checked all the boxes.
Michael R.
Verified
05/06/2026
Awesome Cover
This BAKFlip is the best cover Ive had on any of my trucks by far. Easily installed and gives the truck a nice clean look. Dont hesitate buy one today!
James R.
Verified
10/08/2026
Topper
Got the cover quickly. Install was pretty easy but I did read and watch videos before install. My 11 year old grandson, he did most of the work inside the truck bed, and my son assisted. So you know it was a straight forward install. Love the topper.
Kenneth
Verified
04/28/2026
BAKFlip MX4 Tonneau Cover
I’m very pleased with the fit, finish and ease of installation. A couple of pieces were damaged in shipping and customer service replaced them quickly. The only improvement that I can suggest is a heavier duty box to ship it in.
Joel J.
Verified
04/26/2026
BAKFlip Max4
Very easy install. Fits great and looks good also.
Anonymous
05/11/2026
2nd time purchasing
I was happy the first time installing it on my old truck and now I’m happy the second time on my new truck. The price certainly went up this time, so that was frustrating but I wanted to stick with a product that I was confident in. The packaging could have been better. I had something puncture the box during shipping and it did penetrate deep enough to create a hole in the bottom of the cover. Thankfully it was purely cosmetic and on the bottom side so I opted to patch it myself and not deal with the hassle of complaining. For the amount of money I paid, I probably should have though. The multi functionality of this product is what makes it so nice. I wish there was a gloss black option that might hold up nicer in the extreme az sun.
Steve K.
Verified
10/08/2026
Great tonneau cover
Great tonneau cover for the money.
charles f.
Verified
04/24/2026
It leaks
Was initially impressed with the bed cover. Appearance is great, installation was easy. But after a rain, water pools in the middle of the cover and begins to leak in the middle of the bed. Ive had numerous bed covers (roll up/soft trifold/hard trifold) and they all leak and I understand that it is unavoidable. However, other bed covers have leaked towards the cab or at the tailgate. This one leaks right in the middle of the bed. For the price I cannot and would not recommend this cover to friends/family.
Douglas B.
Verified
04/20/2026
Best Value Tonneau Cover
Easy installation and very versatile tri-folding Tonneau Cover. Removes easily. Aesthetically appealing. Highly recommend.
Larry C.
Verified
04/17/2026
Great Fit and Look
Excellent customer service and easy on line ordering. Packaged well and received with no damage. Easy install. Very pleased with look.
Anonymous
04/25/2026
Fine lid
This is our second Bakflip, we are very happy with it.
Kristen W.
Verified
08/21/2026
Poor quality
The first backflip we received had a divet in the panel. They sent us a new panel that had the corner cover damaged and the screw pulled out. It was for a Long bed truck and it didn’t come with full length solid rails we had to add the extra 2’ which wasn’t easy and was annoying. Since we have been using it for over a month, 4-5 of the protective foam pieces have come loose and fallen off and we have tried to put some back on but they keep falling off. Overall this seems like a very low quality truck bed cover with components that can’t hold up to hardly any use or the outdoor elements. Very disappointed in this product.
Reginald S.
Verified
04/14/2026
The Best Truck Bed Cover Yet!
In 2015, I bought my first BakFlip and transferred it to my second Ram 1500. Here in 2026, I bought my third Ram and decided to get the new BakFlip design and am glad I did. Very easy to install and it took me less than 30 minutes. I love the finished look - like it's from the Ram factory. I like that the folded panels are really secured in place when driving and won't get whipped in the wind plus it leaves room for maximum cargo space. The upgraded cable system for latching and unlatching is another big plus. They really designed a great product and I recommend it over all the others out there. . . well worth the money!
Dennis M.
Verified
03/30/2026
BAKFlip tonneau
Love it, easy install, great cover!
Lee A.
Verified
03/05/2026
Solid
Everything I expected it to be. Same as GMs only less $. I rated medium on value because Im cheap :-). Seriously though, it was easy to install. I did it solo in about 45 min. Followed YouTube instructions from a guy that took the time to video his install. Got to love YouTube. Looks sharp. Has performed as expected. Zero issues. If you have a Sierra EV, get this cover.
Richard M.
Verified
10/08/2026
bed cover
the cover added nice look to my chevy truck
Randy
04/18/2026
Best choice
I replaced my soft cover with the BAKflip and it was easy to install and fit perfectly. I would highly recommend it
Ricky B.
Verified
02/19/2026
The BAKFLIP MX4 hard folding GEN3 is great
I just love how it sits on my truck it makes it look very distinguished
Michael F.
Verified
01/18/2026
Very good
Nice product super easy to install but grab a friend its much easier. Product fits the bed nicely. And the lathes made it easy to fold up. If I had one critique I wish the cover on the Cab side was convex to match the shape of the bed on my 25 raptor. Small critique would make it perfect other than that it still gets an A+ from me.
Alan L.
Verified
10/07/2026
New install
Only took me an hour to install. Great looking.
Mohamed Z.
Verified
01/02/2026
Great fit
Ive been wanting a hardtop cover for months but I waiting to sell my camper shell, finally I was able to find the correct match since my truck is eight feet bed. It wasnt an easy task to find the correct one! This one looks great on my truck
Anonymous
03/26/2026
I love my BAKFlip MX4
I love my BAKFlip MX4 Tonneau cover. This is my second cover and I would buy a third if needed.
Cornelius J.
Verified
12/12/2025
Bakflip
Overall so far the cover is great I have no complaints a couple people I know say they have problems with theirs before so I'll just have to wait and see but for me it's great no problem
Kevin W.
Verified
05/02/2026
MX4 Gen 3
I like the cover especially because it's a hard top. There still is leakage and some parts, like the seal, seem to be fragile. Mines popped off. I have to move it a little to make it lock. If I have to use my whole truck bed, it covers my whole back window. I do like the steak flush look. I like that it easily opens with the pull down. I also like the fact you can close it with the truck bed door open or closed. Overall I like it, but for the price, definitely wish there were some things that were better.
Benjamin T.
Verified
10/06/2026
F150 Lightning fits and looks great
Great price for a quality product. Easy to install. Shipping took way longer than expected. The final setup looks amazing.
Michael
Verified
12/10/2025
Love the BAKFlip
Love the BAKFlip but disappointed missing bolts for the Snap to hold it while flipped up. But over all very pleased with the product.
Jeremy
Verified
08/11/2026
Poor Q/A inspection
While the cover looks good the quality of parts were defective. I had to call for replacement and repair parts twice. The cable to release the lip broke due to poor workmanship. I had to replace the latch myself after only 2 weeks. This is way overpriced for having to fix it myself.
Jtmalone86
08/18/2026
Great utility, quality not as much
My wife had one of these on her 2010 nissan titan and it was perfect in every way. So when we bought a newer truck (2015 ram 2500) we wanted to get the same cover. Tonneau was shipped quickly, was packed well and had easy instructions. The fitment is perfect and the overall utility is great. I espec6like how it acts as a headache rack when fully up and out of the way. I've had this item for a year now and have had it opened and closed around 30-40 times. The wire for the section closest to the tailgate broke. Inside the latches the wire is looped and crimped on and it slid out of the crimps. So I had to buy new cable and fix it. Works like a charm now. I will say the other stock cables work well and have not broken. Other issue is the clips that hold the seal into the side of the tonneau keep popping out. They pop back in easily but it's definitely annoying and causes the seal to…
duke
09/12/2026
quiestionable longevity
I have this cover on a 2021 F250. I work in the construction industry and need to open it often. The corner pieces have fallen off and the coating doesn't hold up to medium use. The seal leak in various places. If this is something you rely on, I would consider other brands.
Logan S.
Verified
11/14/2025
Looks Great but Leaks
I love the low profile look of the cover but it leaks in the corners by the cab. I even purchased some silicone putty to fill in the gaps between the bed and the cover, but it still leaks.
Alex S.
Verified
08/06/2026
I am happy with the
I am happy with the product. It works well. My goal was to purchase a more heavy-duty cover, but currently it is not made for the 2026 GMC Sierra AT4 EV. If that ever changes please contact me as I most likely will be interested.
Gary C.
Verified
11/13/2025
Needs Additional Latch set
Second fold from rear window needs a latch set. The joint raises and lowers after your speed reaches 70 mph and above. This can lead to water leaks at the joint. Contacted company, but would not fix problem or refund money. They said this is normal function of the cover. This problem is caused by the design of the aerodynamics of the truck with the Cab Air Deflectors. This is different from all other Chevy Trucks.
Marc C.
Verified
06/07/2026
Tonneau cover is nice - but damaged inside of packing
The cover went on well but once I installed it, I noticed the clip that holds the strap for locking into place in the folded position, was broken off. I found the broken piece in the packing material. The only real fix would be to send the whole cover back and I needed it for my truck. I guess I should have looked it over more closely when I removed it from the packing.
Daron N.
Verified
07/23/2026
Disappointing Quality for the Price
For the price I paid, I wouldnt buy this cover again. The biggest issue is with the long-bed rails. They come in two pieces, but only include three mounting clips. Because of this, its very difficult to get the rails properly aligned during installation, and they never seem to line up quite right. The adhesive rubber bumpers have already started coming loose after being exposed to warm weather. Lastly, the cover gets extremely hot in direct sunlight. It becomes uncomfortable to touch and makes it painful to open when needed. Overall, Im disappointed. For what this cover costs, I expected better quality and a better-designed product. Now that its installed, I feel stuck with something Im not satisfied with.
Noel M.
Verified
05/07/2026
It's good, but not 100%.
It's good, but not 100%. The corners on the front have an opening where water can get in, and it's a bit hard to open.
Kristyn
Verified
03/18/2026
Easy install, nice looking
This tonneau cover was even nicer looking than I thought it would be. Super streamlined and matches my Rhino Lining bedliner somehow. The only complaint is that I installed it three weeks ago and the adhesive foam strips are peeling up already. The truck is garage stored and it’s summer so it hasn’t been in the elements yet.
Garrett N.
Verified
03/14/2026
2026 gmc Sierra AT4X 6. 6L diesel
I installed in myself. Took me 5 hours the only struggle I had was reconnecting fuel lines. Only thing was I wish it had the brackets from the fuel pump to where the connectors end.
David P.
Verified
02/07/2026
Part Installed Incorrectly
The part that the prop connects to, was installed upside down. I cannot completely open my cover securely.
Dave B.
Verified
10/09/2025
Ok
With the longer bed this cover doesn’t allow you to transport with just one fold. Any suggestions. Also, any suggestions on making it less water resistant?
Nate
Verified
07/23/2026
Leaky
This is the least weather proof cover Ive ever owned, on top of that it rattles on any pot hole or bump. The only thing this cover has going for it is the appearance.
Joseph G.
Verified
07/07/2025
Clamps weren't right
The clamps don't seat well against the metal behind the cap rail plastic. So, they can't hold straight when closing the cover. I contacted support and they said to send a picture and over a week later I've gotten nothing back after additional email. Pretty disappointed that something so simple couldn't be resolved quickly. I have put backing material in place until they figure it out so I can at least use it. The tailgate seal was also not seated correctly so I had to take it off and reseat it. For such an expensive product they really aren't doing the small parts well.
Danny S.
Verified
09/20/2026
Too short
Love everything about the cover except that it’s too short. It barely covers the edge of the bed at the front and just touches the tailgate. Seems about two to three inches shorter than it should be so it doesn’t keep the water out at the tailgate and it’s not very secure for theft.
Andy
Verified
09/09/2026
Used bed cover
The foam was glued together and bed cover looks worn and half of the parts are missing . Took it to a place for an install and they told me this is definitely a used item. Wasted a whole day!
Jerry D.
Verified
07/25/2026
Not engineered well for ridgeline
very difficult to get to fit. RETURNED. Thank you for no hassle.
Danny B.
Verified
07/21/2026
1 star
Product is flimsy. You can see light escaping through the cracks from the outside. Plenty of water gets inside. Side trims are always falling off rail. Always looks dirty or faded. Side stands don’t hold up box correctly.
Dale T.
Verified
06/23/2026
Hard folding
I am very unhappy with the fit. It does not allow the tail gate of my 2026 Nissan frontier to properly close. I have to position it further forward on the bed to make it work. I would not recommend this cover or the company.
Jeff S.
Verified
06/16/2026
Be aware of damage and no customer support
Damaged bed cover and no help from customer servic
James I.
Verified
05/16/2026
Will not fit 2025 Nissan Frontier Pro X
I like the appearance and a parent quality of the product, but it would not work on a 25 Nissan frontier the rear latches would not come down enough to latch so I had to return it. customer Service was very helpful and I had no issues so far still waiting on my refund.
Marie C.
Verified
05/12/2026
Nope
It looks unfinished. The rubber molding on the sides creased up were it folds. I gave it some time n the heat to see if it would flatten and it didn’t. The corners by the cab looked unfinished. The installation of the rails was horrible, yes I did it right, and it still didn’t close and lock wo slamming it or lifting on the side rails get it to lock. For the amount of money it cost I expect much better. So I returned mine and went with another brand from another company. And am very happy now. No rubber flap edges. Easy install and locks every time. Yes: the return process was fast and easy, but I’m rating the product.
Dan C.
Verified
05/11/2026
Bakflip MX4 Ram truck w/rambox
I’m very disappointed with this product. It leaks at both the front and rear, which defeats the whole purpose of having a bed cover/top in the first place. The instructions were also a major issue. I have a Ram with the RamBox bed, but the instructions provided were for a Chevy 1500. The installation is not the same, and it made the process much more frustrating than it needed to be. Had I known the product would not seal properly and that the correct truck-specific instructions would not be included, I would have chosen a different top. At this point, I honestly wish I could return it.
Ernest S.
Verified
05/07/2026
Substandard Cover
After making several adjustments to maintain the cover from dismantling, I reached out to customer service but have yet to receive a call.
Jeffrey S.
Verified
07/21/2026
Leaks everywhere
If you want a cover that does not leak look somewhere else. It has been installed correctly and it's still does not prevent water from entering the bed. . after a good rain the bed as water in it do not keep anything that is valuable in your bed.
Chad M.
08/29/2026
Backflip MX4 Bed cover honest feedback
First of all, I don’t like to bring bad news, that being said, here it goes. Last year 2022 in may, I received my first MX4, it looked great! I had little trouble with installing it, about 30 mins I’d say. My issue is with the overall durability or thickness the bad cover aluminum, it dents so easily. One hailstorm and it looked like a golf ball. Ugh, that was just having it for a few months. The company was receptive to my concern, and sent me a “fiberglass” one to hopefully correct the issue. The next light hailstorm and it was another golf ball. I’m not sure if they sent me another aluminum one by mistake, or their fiberglass dents vs. cracks? It’s just a lot of money to ruin the look of your otherwise tough looking truck. Sorry Bakflip, you even tried to make it right by sending me another one, and still failed. Makes me feel a little sick.
RichieT
07/07/2026
Good but not perfect
Looks good, I like that it folds all the way for full bed access. One of the bumpers for when it is fully open blew off. Still leaks water inside. Could probably use to be made a little longer for more coverage over the tail gate. I was expecting better for the money I paid for this thing. I have a cheaper one on a different truck that leaks about the same. I going to try some extra gasket in places and hope for the best.