Gator SFX Soft Tri-Fold Tonneau Cover for 2024-2026 Toyota Tacoma (5' Bed)
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
See it on a truck
Upgraded frame
Clamps tuck into the bows
Long-lasting vinyl
Folds forward for access
Features
- Installs in Minutes: The cover arrives assembled and clamps to the bed flange with no drilling, and on most trucks the clamps tighten by hand. If a plastic bed rail cap hangs below the metal flange (Gator names 2004-14 and 2021 F-150 and 2009-19 Ram as common cases), trim the cap so the clamps reach metal. The 2024+ Ranger and Tacoma use brackets and a Torx driver.
- Opens in One Smooth Motion: Spring-loaded clamps release and grab in a single smooth movement, so opening the cover and latching it shut takes seconds and it closes firmly every time.
- Upgraded Frame: A heavy-duty aluminum frame carries support bows that Gator says are now 70% larger, so the vinyl holds its shape instead of sagging under rain, hail or snow.
- Clamps Tuck Into the Bows: When the cover folds, the clamps sit recessed inside the bows instead of rubbing on the fabric, which protects the vinyl from punctures. Stow the rear clamps before folding the second panel, as Gator's sheet directs.
- Long-Lasting Vinyl: The top is a tough vinyl that resists tears and weather, and foam rubber seals on all four sides help keep rain, dirt and dust out of the bed. Gator says it tests the SFX from -40 to 180°F and from 0 to 95% humidity.
- Folds Forward for Access: Fold the panels toward the cab to open two-thirds of the bed, then fasten the buckle straps and both tethers to drive with it open. For the full bed, the cover lifts off by hand in minutes on most trucks; Gator notes a tool may be needed on trucks with a factory track system.
Description & Fitment
The 2024-2026 Tacoma with the 5' bed has its own SFX and its own install sheet. Instead of the usual clamp-to-flange setup, the cab clamp brackets mount on slide nuts in the cargo rails with Torx screws; Gator puts a T27 Torx key in the kit, and the sheet also lists scissors or a razor blade. No drilling is called for. Once mounted, the cover folds to the cab and its clamps release in one motion.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2024-2026 | Tacoma | 5' | — |
Check your fit: the 2024-2026 Tacoma with the 5' bed. This truck uses its own Gator sheet: brackets mount on slide nuts in the factory cargo rails (T27 Torx key included).
Not for: the 2016-2023 Tacoma (SF3409 for the 5'1" bed, SF3410 for the 6'2" bed) or the 2024 and newer 6'2" bed (not carried here).
About Gator
Gator makes truck bed covers in soft roll-up, soft tri-fold, hard folding and retractable styles, along with bed mats and floor liners. The brand started from one plain idea: a pickup bed should get protection that keeps working, season after season.
Gator builds its covers around everyday toughness and weather resistance, and it designs them for a home install. Every cover comes with Gator's install guide.
Buying Gator from Prestige Truck. Gator sells its covers only through authorized retailers, and Prestige Truck is an authorized Gator dealer. Every Gator cover we sell is new, genuine Gator product. Gator's warranty covers the original buyer and may ask for proof of purchase, so keep your Prestige Truck order receipt with your records.
Frequently Asked Questions
What tools do I need?
Gator's 2024 Tacoma sheet lists scissors or a razor blade and includes a T27 Torx key in the kit. The tailgate clamp bracket screws are torqued to 65 in-lb.
Does it fit a 2023 Tacoma?
No. The 2016-2023 Tacoma takes SF3409 (5'1") or SF3410 (6'2").
Is the SFX waterproof?
No soft cover is watertight. Foam rubber seals on all four sides keep most rain, dirt and dust out, but some moisture can get in during heavy weather, so keep anything that must stay dry in a sealed bin.
Can I drive with the cover folded?
Yes, with every panel folded up and secured at the cab by the buckle straps and both tethers. When closed, all four clamps must be engaged. Driving with it partly open voids Gator's warranty.
Can I take the cover off completely?
Yes. It lifts off by hand in minutes on most trucks, which opens the whole bed. Gator notes a tool may be needed on trucks with a factory track system.
How do I keep the vinyl in good shape?
Wash with mild car soap and water. If you use a vinyl conditioner, pick a water-based one; Gator warns that silicone or petroleum products can crack and shrink the vinyl. Stow the rear clamps before folding so they can't puncture the fabric.
Installation
Here's the short version. Follow Gator's install sheet (below) for your truck's exact steps.
- Set the cover over the cab end of the bed, centered and square.
- Unfold, align cab and tail (two-fin tail seal on the tailgate), refold without shifting.
- Remove the tailgate-end cargo rail caps and tie-downs.
- Slide a nut into each cargo rail near the cab, mount the cab clamp bracket with two Torx screws (T27 key); hook the cab clamp under it and tighten the T-handle two turns past contact.
- Fit each tether slide nut about 3" behind the front bracket and tighten the knob; refit the cleats and end caps.
- Close the cover; mount the tailgate clamp brackets on slide nuts (65 in-lb / 7.3 Nm) and hook the rear clamps under the flange.
Stuck on a step?
Specifications
| Brand | Gator |
|---|---|
| Part Number | SF3411 |
| Cover Type | Soft tri-fold |
| Top Material | Tear- and weather-resistant vinyl, vinyl-grain finish |
| Frame | Heavy-duty aluminum with enlarged support bows |
| Latching | Spring-loaded clamps |
| Seals | Foam rubber, all four sides |
| Bed Access | Up to 2/3 folded; full bed with the cover removed |
| Tested Range | -40 to 180°F, 0 to 95% humidity (Gator) |
| Mounting | Clamp-on, no drilling; bed-cap trim on some trucks |
| Bed Length | 5' |
| UPC | 750289634112 |
More media
3 videosWarranty, shipping & returns
-
Warranty
Gator backs the SFX with a 2-year limited warranty against defects in materials and workmanship.- The hard parts (rails, clamps and bows) and the vinyl fabric are each covered for 2 years from the original purchase date.
- If a cover, tarp or hardware part is defective, Gator repairs or replaces it at its choice, and may substitute a newer model of similar form and function.
- Coverage is for the first buyer and can't be transferred. Gator asks for a registration on file or proof of original purchase (a dated, itemized receipt), so keep your order receipt.
- To keep it valid: wash with mild car soap and water only; use only water-based vinyl conditioners, never ones with silicone or petroleum; drive only with all four clamps engaged, or with every panel folded and held at the cab by the buckle straps and both tethers; stow the rear clamps before folding; clear snow and ice before opening; check the cab clamps after the first week and now and then after that; and take the cover off before the truck is towed backward.
- Claims need a return authorization number before anything is sent back. Gator may ask for the part, postage prepaid, to inspect it, and shipping for a repair or replacement is at the owner's cost; Gator charges nothing else for a covered repair or replacement.
- Not covered: accident damage, neglect, unforeseeable use, improper installation or servicing, or anything not caused by a defect in material or workmanship. Your state may give you other rights as well.
- For a claim or help registering your warranty, contact us with your order number and photos of the problem, and we'll walk you through Gator's process.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
This cover ships folded in one long box, so check the vinyl for tears and the frame and clamps for bends before you install it. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.