Go Rhino XRS Cross Bars turn the truck bed into a base for a rooftop tent, cargo box or gear without taking up space inside the bed. Steel corner uprights lift two 4-Core cross bars nearly 6" above the bed caps while keeping them below the roof of the cab. One kit is for mid-size beds without a tonneau cover, and another attaches to the T-tracks of a tonneau cover on full-size beds.
What's Included:
- Pair of XRS corner uprights (towers) per side and two 4-Core cross bars
- Mounting clamps or track plates and hardware for the kit named in the title
Optional side rail kits and 4-Core accessories are sold separately.
Features
Bed Stays Open Underneath
The uprights lift the cross bars nearly 6" above the bed caps, so a tent or cargo box rides on top while the bed below stays usable.
Below the Cab Roofline
The cross bars sit lower than the roof of the cab, which helps cut wind resistance with gear mounted on top.
4-Core Accessory Mounting
The 4-Core cross bars take standard 1/4-20 hex head bolts and most of Go Rhino's 4-Core accessories, sold separately.
600 lb Static Rating
Go Rhino rates the XRS Cross Bars for up to 600 lb of static load.
Two Mounting Styles
The mid-size kit clamps or bolts to the bed with or without factory cargo rails; the full-size kit attaches to a tonneau cover's T-tracks.
No Drilling or Cutting
Installation requires no drilling or cutting, and the steel parts are finished in textured black powder coat.
Fitment & Compatibility
Fit guidance: Go Rhino builds each XRS kit for specific vehicles. Choose your vehicle to see its part numbers, finish options and fit notes.
Specifications
-
Brand: Go Rhino
-
Series: XRS
-
Material: Steel
-
Height above bed caps: Nearly 6"
-
Static load: Up to 600 lb
-
Accessory thread: 1/4-20 hex head bolts (4-Core)
-
Warranty: 5-year limited
Installation
Type: Bed-mounted cross bar kit · Mount: bed rail clamps or bed track (mid-size, no tonneau) or tonneau cover T-tracks (full-size) · Drilling: none · Time: about 1 hour
The XRS Cross Bars install with sockets and wrenches in about an hour, with no drilling or cutting. The mid-size kit clamps or bolts to the bed with or without factory cargo rails and does not work with a tonneau cover; the full-size kit bolts to the T-tracks of a tonneau cover. Go Rhino's guide for each part number shows the steps.
Warranty, Shipping & Returns
Warranty. Go Rhino backs the XRS Cross Bars with a 5-year limited warranty. Under Go Rhino's warranty terms, a product that fails from a manufacturing defect in materials or workmanship is repaired or replaced at Go Rhino's discretion, and the finish is covered for the original owner, covering red rust, peeling, flaking and cracking for 5 years from the date of purchase. Go Rhino may ask for proof of purchase and photos, and every warranty return needs an RGA number.
Shipping. Large parts such as bumpers, grille guards, bars and racks ship by ground carrier in long or heavy cartons, and an oversize carton can travel by freight. The carrier and service are chosen by the size and weight of the carton when the order ships.
Inspect on delivery. Open the carton when it arrives and check every part and the hardware against the parts list in the Go Rhino guide before you start. Note any visible carton damage on the delivery receipt and photograph it, because damage reported later is much harder to claim.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Go Rhino
Go Rhino makes exterior accessories for pickups, Jeeps and SUVs. Along the sides of the vehicle the range covers running boards in the RB10, RB20 and RB30 lines and their Slim versions, VoltStep electric running boards (power boards), nerf bars and side steps such as the 1000 Series, 4000 Series and O.E. Xtreme, V-Series V3 steps, and the Dominator steps, drop steps and DSS sliders, along with frame-mounted rock sliders. At the front, Go Rhino builds the Charger RC2 and RC4 LR bull bars, the 3000 Series grille guard and 3100 Series StepGuard, and front bumpers including the BR11, Element, Trailline and Rockline.
Further back come rear bumpers such as the BR20.5 and Trailline, sport bars and bed bars, stake pocket bed rails, XRS bed racks and cross bars, and the CEROS roof rack, plus light mounts for the hood, windshield and cowl, jack mounts and a spare tire relocation kit for Jeeps. Many Go Rhino products carry a limited lifetime structural warranty together with a 5-year finish warranty; other lines are covered for 5 years on black finishes and for the life of the product on polished stainless, and the frame-mounted sliders carry a 1-year warranty. Go Rhino is based in Brea, California.
