N-Fab Growler Fleet side steps in textured black, pair on white

N-Fab Growler Fleet side steps in textured black, low view, installed along the rocker

N-Fab Growler Fleet side steps in textured black, front three-quarter view, installed along the rocker, on a Ford Transit

N-Fab Growler Fleet side steps in textured black, complete unit on white, on a Ford Transit

N-Fab Growler Fleet side steps in textured black, front three-quarter view, installed along the rocker

N-Fab Growler Fleet side steps in textured black, installed along the rocker

N-Fab Growler Fleet side steps in textured black, boot on the step at an open door

N-Fab Growler Fleet side steps in textured black, rear three-quarter view, installed along the rocker

N-Fab Growler Fleet side steps in textured black, step close-up, on a Ford Transit

N-Fab Growler Fleet side steps in textured black, step close-up

N-Fab Growler Fleet side steps in textured black, step tread macro

N-Fab Growler Fleet Running Boards for 2019-2025 Ford Transit

Name: N-Fab Growler Fleet Running Boards for 2019-2025 Ford Transit
Brand: N-Fab
SKU: NFBGFF19TV-TX
Price: 529.99 USD
Availability: InStock

$529.99

FREE SHIPPINGNo sales tax Only 1 leftIn stock now Estimated delivery

GO

Clear

Free gift included with your order

Details

Guaranteed FitmentTeam-confirmed fit or money back
No Sales TaxZero sales tax on every order
30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

+1 (470) 823-2453 Email Us

The Growler Fleet is an aluminum running board with a louvered Growler tread across its full 7" width, carried on vehicle-specific brackets along the rocker panel. This part number is cut for the 2019-2025 Ford Transit, with brackets that follow that body's own mounting points along the rocker. This listing is N-Fab part number GFF19TV, finished in textured black.

What's Included:

2x Growler Fleet running boards (driver and passenger side)
Vehicle-specific mounting brackets
Mounting hardware kit

Features

A Full 7" Tread
The step surface is 7" wide from end to end, so a boot lands flat instead of rolling off a tube. That width is what makes the Growler Fleet feel like a work platform rather than a styling piece.

Louvered Growler Tread
Raised louvers run across the top of the board and give a sole an edge to grip in rain, mud or snow. It is N-Fab's Growler pattern, the same tread used on the Growler hitch and rear van steps.

Aluminum Construction
The board is aluminum throughout. It is lighter to lift into place than a steel board of the same size, and where a rock chips the coating it will not bloom red rust the way bare steel does.

Textured Black Powder Coat
A textured black powder coat covers the aluminum for extra corrosion resistance and a matte, work-truck look that hides scuffs. N-Fab warrants the finish for five years.

Brackets for Your Vehicle
Each part number ships with brackets made for its own body and cab, plus the hardware to hang both boards. Most applications bolt to existing mounting points; where a vehicle needs a hole drilled, the Installation tab of that listing says so.

Covers the Door Openings
The boards run the length of the door openings, so whoever is climbing in finds the step directly below where they enter.

Lifetime Structural Warranty
N-Fab covers the boards, brackets and welds for life against defects in materials and workmanship, for the original purchaser on the vehicle they were first installed on.

Fitment & Compatibility

Fit guidance: Fits the 2019-2025 Ford Transit. Match your cab before ordering: each bar is built for one body style.

Specifications

Series: N-Fab Growler Fleet
Product Type: Cab-length running boards
Step Material: Aluminum
Step Width: 7"
Step Surface: Louvered Growler tread
Mounting: Vehicle-specific brackets at the rocker panel
Sold As: A pair, driver and passenger side
Part number: GFF19TV-TX
Finish: Textured Black
Warranty: Lifetime structural + 5-year powder-coat finish

Installation

Type: Bolt-on, drilling required for this application · Tools: Hand tools (socket set and ratchet); a drill on applications whose sheet calls for one · Difficulty: DIY-friendly; a helper makes aligning the boards easier

The vehicle-specific brackets go on along the rocker panel first, then each board is set on its brackets and lined up before the hardware is tightened. Check the hardware again after the first few hundred miles so the boards stay level. The installation guide for this application calls for drilling: p 3: Next, make sure the mounting brackets are straight and level for the next step. Step 4: You will need to drill out the holes for the pinch weld mounts. Use.

Resources

Official N-Fab Growler Fleet installation guide (PDF), the manufacturer's step-by-step installation instructions for this part number.

Warranty, Shipping & Returns

Warranty. N-Fab warrants the Growler Fleet running boards for life against defects in materials and workmanship, covering the boards, the brackets and the welds, and warrants the powder-coat finish for five years. Both terms belong to the original purchaser, on the vehicle the product was first installed on, and they do not transfer if the vehicle is sold.

Free shipping. This part ships by ground carrier as an oversize parcel, in a long carton rather than on a pallet.

Inspect on delivery. A long carton takes knocks in transit, so look it over while the driver is there and note any crushed ends or punctures on the delivery record. Unpack it the same day and check the parts list: a bent bracket or a short hardware bag reported in the first days is a quick replacement.

Returns. Unused items in their original packaging can be returned within 30 days of delivery. N-Fab charges a 20% restocking fee on any product returned without a defect, and an N-Fab representative has to confirm a defect in fit, form or function before a return is authorized, so please contact us before shipping a part back. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.

About N-Fab

N-Fab designs and fabricates steps, running boards, rock rails and pre-runner bumpers for trucks, SUVs and vans, along with sports bars, racks and lighting mounts. Every N-Fab product carries a lifetime warranty against defects in materials and workmanship plus a five-year warranty on the powder-coat finish, both held by the original purchaser on the vehicle the part was first installed on.

The Growler Fleet is the work-focused member of N-Fab's step lineup and the side-step half of the Growler family, which also includes the Growler Rear Van Step and the Growler Hitch Step on the same tread. Buyers who want a tube step instead can look at the stainless Podium, the mild-steel Nerf Step and the extruded-aluminum Predator Pro, while the Roan is N-Fab's steel running board with a 5.5" plate step.

Alongside its steel tube work, N-Fab builds a line of aluminum products for owners who want a step or rack that sheds weight and will not form red rust where the coating is chipped. These parts share the textured black powder coat used across the range, and vehicle-specific parts ship with their own brackets and hardware.

Aluminum that will not rust red

The Growler Fleet is aluminum from end to end, so a stone chip in the coating does not bloom into red rust the way bare steel does. The textured black powder coat on top is warranted by N-Fab for five years.

N-Fab Growler Fleet side steps in textured black, welded end cap macro

Brackets made for your vehicle

Every part number ships with brackets cut for its own body and cab, plus the hardware to hang both boards. Most applications bolt to existing mounting points, and any that need a hole drilled say so in their Installation tab.

A step built for work boots

A 7" wide aluminum tread gives a whole boot somewhere to land, whether you are climbing in with tools or reaching a load on the roof. The louvered Growler surface keeps its grip when the board is wet or muddy.

Frequently Asked Questions

Straight answers on specs, fit and support

Do I have to drill into my truck to install these?

On most applications, no: the brackets bolt to existing mounting points with the hardware in the box. A handful of applications do call for drilling, for example a hole through the pinch weld for one bracket, and on those listings the Installation tab says so plainly. Check that tab for your part number before you order.

Will work boots grip the tread when it is wet?

That is what the louvered Growler tread is for. The raised louvers give a sole an edge to catch in rain, mud or snow, and the 7" width means your whole foot is on the board. No step surface is grip-proof on ice, so use normal care in winter.

Will aluminum boards hold up to road salt?

Aluminum does not form red rust the way mild steel does, which is a real advantage in salt states, and the textured black powder coat on top is warranted by N-Fab for five years. Salt can still attack the coating over time, so rinsing the boards through the winter will keep them looking right longer.

How much weight can the boards hold?

N-Fab does not publish a load rating for the Growler Fleet, so we do not quote one. The boards are sold as a step for getting in and out, and every application is carried on its own set of brackets.

Do they come as a pair, and is the hardware included?

Yes. Every order is two boards, driver and passenger side, with the vehicle-specific brackets and the hardware kit. Nothing else is needed to fit them.

Can the boards sag or shift over time?

A board that is fully tightened stays where it is set. The common cause of a board that settles is hardware left short of full torque, so tighten everything once the boards are aligned and check the bolts again after the first few hundred miles.