The Dual Steering Stabilizer With Falcon helps a solid front axle vehicle hold its line when larger tires and uneven pavement try to push the steering around. Sharper steering response and a steadier on-center feel make long drives less tiring. Part number 77-13220 is built for the 2013-2026 Ram 2500 and 3500.
What's Included:
| Kit components (ReadyLIFT) |
|---|
| Axle side mounting bracket with hardware |
| Two Falcon Steering Stabilizers |
Wheels, tires, steering linkage upgrades and the alignment after installation are not included.
Features
Built for solid front axles
These parts are developed for solid front axle platforms, where larger tires and lift height amplify steering kickback and wander.
Brackets made for each platform
Mounting hardware is designed for the listed vehicle, so parts fit the factory steering and axle layout.
Steadier steering feel
The aim is less shimmy through the wheel, better on-center feel and fewer corrections on rough pavement.
Suits leveled and lifted setups
ReadyLIFT lists these parts for leveled and lifted vehicles on the listed platforms, and most also suit trucks at factory height, as noted on each listing.
Pairs with ReadyLIFT kits
They integrate with ReadyLIFT leveling and lift kits on the same platform.
Fitment & Compatibility
Ram
| Years |
Model |
Notes |
| 2013-2026 |
2500 |
— |
| 2013-2026 |
3500 |
— |
Fit guidance: Fits: 2013-2026 Ram 2500/3500. Check your vehicle's trim, drivetrain and factory suspension against these notes before ordering.
ReadyLIFT fit notes for this part
| Requires a minimum 5.75" wheel backspacing for proper clearance (NOT COMPATIBLE WITH FACTORY WHEELS |
Specifications
-
Brand: ReadyLIFT
-
Warranty: ReadyLIFT no-hassle warranty; wearable components covered for up to 1 year
-
Install time (ReadyLIFT estimate): about 1 hours (give or take 0.5), alignment and wheel mounting extra
-
Shipping weight: 25 lb
-
Kit type: Steering/sway bar
-
Alignment required: Yes, after installation
-
Install difficulty: Professional install recommended
-
Part number: 77-13220
Tire fitment (ReadyLIFT's published guidance for this kit)
| Requires 5.75" backspace or less wheels - cannot be used with stock wheels. |
Tire and wheel sizes vary by manufacturer, so test-fit your combination before installation.
Installation
Type: Steering stabilizer kit · Install: Moderate, platform-specific brackets · Afterward: Alignment and headlamp aim check
Check the listing for any wheel backspacing or tie rod requirements before installing. Read the ReadyLIFT instructions completely before starting. A certified mechanic is recommended, and the vehicle may need an alignment, a headlamp aim check and ADAS recalibration afterward, which can add cost.
ReadyLIFT estimates about 1 hours for this kit, give or take 0.5 hours, not counting the alignment or mounting wheels and tires.
ReadyLIFT's installation instructions for this part number are linked under Resources. Read them fully before starting.
Resources
Warranty, Shipping & Returns
Warranty. ReadyLIFT backs its parts with a no-hassle warranty for the original purchaser: if a covered part breaks or arrives defective, ReadyLIFT ships a new one. Parts that wear with use, including shocks, bushings, ball joints, heim joints and steering extensions, carry up to 1 year of coverage. Labor and installation costs are not refundable, and discontinued, clearance and outlet items are excluded. Shipping. The carrier and ship method are set by the size and weight of the cartons when the order is placed; larger kits ship by freight. Inspect on delivery. Inspect the carton and every part when the delivery arrives, note any shipping damage with the carrier, and contact us right away so we can make it right.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About ReadyLIFT
ReadyLIFT Suspension started in 2006 with a practical goal: give truck and SUV owners more tire clearance and a better stance while keeping the ride and handling they had from the factory.
That idea began as an alternative to traditional big lift kits and has grown into a full range of leveling kits, SST lift systems, complete big lift kits, coilover systems, control arms, shocks and related suspension upgrades for popular trucks and SUVs.
In August 2026 ReadyLIFT joined Bestop Premium Accessories Group, and the brand continues to invest in engineering, product development, manufacturing and customer support for lifted trucks and SUVs.
