Give your 2002-2009 Ram pickup a tough aluminum hard roll-up cover that secures your gear and still opens the full bed in seconds. The 6'4" bed is the do-it-all length, and the X2 covers it with a low, factory-look profile that keeps your gear out of sight and out of the weather. It clamps to the factory bed rails on the 2002-2009 Ram 1500/2500/3500 with no drilling and installs in about an hour, and its interlocking aluminum slats and locking rails give you real hard-cover security for the 6'4" bed.
What's Included:
BAK Revolver X2 hard roll-up cover assembly
Two clamp-on mounting side rails
Front bulkhead seal and flush-fit side seals
Clamp and hardware kit
Installation guide
Features
Slash-Resistant Hard Roll-Up Security Patented interlocking heavy-duty aluminum slats resist prying, cutting and forced entry, and patented rotational locking rails secure the cover the full length of the bed on both sides. It carries the brand's highest Level 3 security rating and locks down with your tailgate, so your cargo stays protected.
Rolls Up in Seconds for 100% Bed Access One-handed operation rolls the cover forward and stores it at the bulkhead, opening the entire bed for tall or bulky loads. There are no heavy panels to lift and no velcro or stitching, so going from closed to full bed access takes only seconds.
Drive With It Open, Full Rear Visibility With the cover rolled up and secured at the front of the bed you keep a clear view through the rear window and factory camera, so you can haul with the cover open without blocking your sightlines or your backup view.
DualShield Vinyl Over Aluminum An exclusive one-piece DualShield 60-grade vinyl skin is bonded over the aluminum slats for a durable, soft-touch surface with no seams, and flush-fitting side seals help keep rain, dust and spray off your gear.
The Lowest-Profile Hard Roll-Up The X2 sits nearly flush with your bed rails for a clean, integrated look that appears factory-installed, and because it rolls up instead of retracting into a canister it does not eat into your usable cargo space.
No-Drill Install, 400 lb Rated, Made in the USA The X2 clamps onto your factory bed rails with no drilling in about an hour, is rated for 400 lb of evenly distributed load across the closed cover, works with the BAKBox 2 fold-away tool box.
Fitment & Compatibility
Years
Make
Model
Bed
Fit
2002-2009
Ram
1500
6'4"
✓ Yes, direct fit for the 6'4" bed
2002-2009
Ram
2500
6'4"
✓ Yes, direct fit for the 6'4" bed
2002-2009
Ram
3500
6'4"
✓ Yes, direct fit for the 6'4" bed
Fit guidance: Confirm your exact bed length before ordering. This cover is built for the 6'4" (76.3") and will not fit other bed lengths. The Revolver X2 rolls forward and stores in a low spool at the front of the bed, so you lose a few inches of bed length at the bulkhead when it is rolled open.
Specifications
Cover Type: Hard roll-up (rolling) tonneau cover
Material: Interlocking heavy-duty aluminum slats with a DualShield 60-grade vinyl skin
Finish: Matte black, textured vinyl grain
Bed Access: 100%, rolls up and stores at the bulkhead
Weight Capacity: 400 lb, evenly distributed
Security: Patented rotational locking rails full bed length both sides, automatic slam latches, Level 3 rated; locks with the tailgate
Sealing: Flush-fitting side seals and bulkhead seal; water drains through the bed
Profile: Low-profile, sits nearly flush with the bed rails
Fits Bed: 6'4" (76.3")
Drilling Required: No, clamps to the factory bed rails
Install Time: About 1 hour or less, one person
Accessory Compatibility: Compatible with the BAKBox 2 fold-away tool box
Weight: About 92 lb
Warranty: 3-year limited
Installation
Type: Clamp-on to the factory bed rails, no drilling · Time: About 1 hour or less · Tools: Basic hand tools; clamps and hardware are included · Difficulty: Level 1, one-person, DIY-friendly
Set the cover at the front of the bed, attach the two side rails to your factory bed rails with the included clamps (no drilling), then unroll the cover and set the tension. Watch the official install video in this tab and follow the printed guide for exact clamp placement.
Watch the model-specific installation walkthrough:
Resources
Everything you need for your BAK Revolver X2 Hard Roll-Up Tonneau Cover for 2002-2009 Ram 1500/2500/3500, in one place.
Warranty. 3-year limited warranty from BAK Industries against defects in materials and workmanship, backed by US-based product experts. It does not cover accident damage, neglect, unforeseeable use, improper installation or improper servicing.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
About BAK Industries
BAK Industries has engineered premium truck bed covers in the USA for decades and is a flagship tonneau brand of RealTruck, one of the largest truck-accessory manufacturers in North America. Its hard-folding BAKFlip and retractable Revolver lines set the benchmark for the category, pairing heavy-duty aluminum construction with a low-profile, weathertight design.
Every BAK cover is built for real-world truck use: no-drill, clamp-on installation that mounts in about 30 minutes, full bed access when folded or rolled back, and reinforced latching that keeps cargo secure and dry. The lineup runs from the value-focused BAKFlip MX4 and G2, to the flagship FRP-panel F1 and FiberMax, to the industrial Revolver X2 and X4s roll-ups, covering nearly every popular truck and bed length.
Backed by US-based product support and a multi-year manufacturer warranty, a BAK cover is a buy-it-once upgrade that protects tools, cargo, and gear while giving a truck a cleaner, more finished look.
Authorized BAK Industries dealer. Prestige Truck is an authorized dealer of BAK Industries, so every tonneau cover and accessory you buy is 100% genuine and factory-new, covered by the full BAK Industries manufacturer warranty, and backed by our own US-based support team.
BAK Revolver X2 Install Walkthrough
Want a second look before you start? This official RealTruck walkthrough covers the Revolver X2 clamp-on installation from start to finish.
It is the same no-drill process on your truck: set the cover at the bulkhead, clamp the two side rails to your factory bed rails, then unroll the cover and set the tension. A handy companion to the step-by-step install video above if you like to watch the whole job through once first.
Revolver X2 Fast Facts
RealTruck's Fast Facts on the Revolver X2 hard roll-up, the vinyl-over-aluminum-slat deck, the rotational locking, and the low-profile roll that stows at the bulkhead.
A concise overview of why the X2 sits between a soft roll-up and a hard folding cover.
Revolver Design Overview
A closer look at the Revolver roll-up design, the aluminum slats under a vinyl skin and the automatic rotational lock that secures the cover as it rolls closed.
It covers how the system stays low and tight to the bed rails.
Frequently Asked Questions
Straight answers on specs, fit and support
Is the Revolver X2 waterproof, or will water get in?
The Revolver X2 is water-resistant, not fully waterproof, which is normal for roll-up covers. The one-piece DualShield vinyl has no seams and the flush-fitting side seals plus the bulkhead seal keep out most rain, dust and car-wash spray, and any water that reaches the bed drains away. In a heavy storm or pressure wash you may see a little moisture at the tailgate, so keep anything delicate in a bag.
How secure is the X2 compared to a soft roll-up cover?
Much more secure. Instead of fabric it uses interlocking heavy-duty aluminum slats that resist slashing and prying, and patented rotational locking rails lock the cover down the full length of the bed on both sides. It carries BAK's highest Level 3 security rating and locks with your tailgate, so on your 2002-and-up Ram 1500/2500/3500 a closed cover cannot simply be peeled back.
Can I drive with the cover rolled up?
Yes. The cover rolls forward and secures at the front of the bed with the included strap, so you can drive with it open when you are hauling something tall. Rolled up it stays low and keeps your rear window and backup camera view clear. On the 6'4" bed that lets you carry a tall appliance or a bike upright while the cover stays out of the way at the bulkhead.
Will this fit my Ram if it has the RamBox?
No. This standard Revolver X2 is for the 2002-2009 Ram 6'4" (76.3") bed bed without the RamBox cargo system. If your Ram has the factory RamBox side compartments, you need the RamBox-specific X2 instead.
Which Ram bed length does this fit?
This application covers the 6'4" (76.3") bed bed on the 2002-2009 Ram 1500/2500/3500. Ram offered more than one bed length in these years, so measure your bed and match the fitment table before ordering.
Does it work with the BAKBox 2 tool box?
Yes. The Revolver X2 is compatible with the BAKBox 2 fold-away bed tool box, so you can add lockable storage at the bulkhead of your Ram 1500/2500/3500 and still roll the cover open over it. There is plenty of room for it on this bed length.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
