BAK Revolver X2 Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (5'7" Bed)

Add a low-profile hard roll-up to your new-generation 2022-2025 Toyota Tundra that secures the bed and opens it fully in seconds. On the 5'5" short bed the X2 keeps a daily driver or crew cab clean and secure without adding bulk, then rolls out of the way in seconds when you need the whole bed. It clamps to the factory bed rails on the 2022-2025 Toyota Tundra with no drilling and installs in about an hour, and its interlocking aluminum slats and locking rails give you real hard-cover security for the 5'5" bed.

What's Included:

• BAK Revolver X2 hard roll-up cover assembly
• Two clamp-on mounting side rails
• Front bulkhead seal and flush-fit side seals
• Clamp and hardware kit
• Installation guide

Features

Slash-Resistant Hard Roll-Up Security
Patented interlocking heavy-duty aluminum slats resist prying, cutting and forced entry, and patented rotational locking rails secure the cover the full length of the bed on both sides. It carries the brand's highest Level 3 security rating and locks down with your tailgate, so your cargo stays protected.

Rolls Up in Seconds for 100% Bed Access
One-handed operation rolls the cover forward and stores it at the bulkhead, opening the entire bed for tall or bulky loads. There are no heavy panels to lift and no velcro or stitching, so going from closed to full bed access takes only seconds.

Drive With It Open, Full Rear Visibility
With the cover rolled up and secured at the front of the bed you keep a clear view through the rear window and factory camera, so you can haul with the cover open without blocking your sightlines or your backup view.

DualShield Vinyl Over Aluminum
An exclusive one-piece DualShield 60-grade vinyl skin is bonded over the aluminum slats for a durable, soft-touch surface with no seams, and flush-fitting side seals help keep rain, dust and spray off your gear.

The Lowest-Profile Hard Roll-Up
The X2 sits nearly flush with your bed rails for a clean, integrated look that appears factory-installed, and because it rolls up instead of retracting into a canister it does not eat into your usable cargo space.

No-Drill Install, 400 lb Rated, Made in the USA
The X2 clamps onto your factory bed rails with no drilling in about an hour, is rated for 400 lb of evenly distributed load across the closed cover, works with the BAKBox 2 fold-away tool box.

Fitment & Compatibility

Specifications

• Cover Type: Hard roll-up (rolling) tonneau cover
• Material: Interlocking heavy-duty aluminum slats with a DualShield 60-grade vinyl skin
• Finish: Matte black, textured vinyl grain
• Bed Access: 100%, rolls up and stores at the bulkhead
• Weight Capacity: 400 lb, evenly distributed
• Security: Patented rotational locking rails full bed length both sides, automatic slam latches, Level 3 rated; locks with the tailgate
• Sealing: Flush-fitting side seals and bulkhead seal; water drains through the bed
• Profile: Low-profile, sits nearly flush with the bed rails
• Fits Bed: 5'5" (65.6")
• Drilling Required: No, clamps to the factory bed rails
• Install Time: About 1 hour or less, one person
• Accessory Compatibility: Compatible with the BAKBox 2 fold-away tool box
• Weight: About 81 lb
• Warranty: 3-year limited

Installation

Type: Clamp-on to the factory bed rails, no drilling  ·  Time: About 1 hour or less  ·  Tools: Basic hand tools; clamps and hardware are included  ·  Difficulty: Level 1, one-person, DIY-friendly

Set the cover at the front of the bed, attach the two side rails to your factory bed rails with the included clamps (no drilling), then unroll the cover and set the tension. Watch the official install video in this tab and follow the printed guide for exact clamp placement.

Watch the model-specific installation walkthrough:

Resources

Everything you need for your BAK Revolver X2 Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra, in one place.

• Official BAK Revolver X2 Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra installation guide (PDF), the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.

Warranty, Shipping & Returns

Warranty. 3-year limited warranty from BAK Industries against defects in materials and workmanship, backed by US-based product experts. It does not cover accident damage, neglect, unforeseeable use, improper installation or improper servicing.

Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.

Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.

About BAK Industries

BAK Industries has engineered premium truck bed covers in the USA for decades and is a flagship tonneau brand of RealTruck, one of the largest truck-accessory manufacturers in North America. Its hard-folding BAKFlip and retractable Revolver lines set the benchmark for the category, pairing heavy-duty aluminum construction with a low-profile, weathertight design.

Every BAK cover is built for real-world truck use: no-drill, clamp-on installation that mounts in about 30 minutes, full bed access when folded or rolled back, and reinforced latching that keeps cargo secure and dry. The lineup runs from the value-focused BAKFlip MX4 and G2, to the flagship FRP-panel F1 and FiberMax, to the industrial Revolver X2 and X4s roll-ups, covering nearly every popular truck and bed length.

Backed by US-based product support and a multi-year manufacturer warranty, a BAK cover is a buy-it-once upgrade that protects tools, cargo, and gear while giving a truck a cleaner, more finished look.