Give your work truck a classic, high-visibility look with the Weather Guard 137-0-04" bright aluminum diamond plate. Its clear ARMOR TUF powder coat lets the raw diamond plate shine through while sealing the aluminum against corrosion, fading and road salt. If you want the traditional, high-visibility look most buyers picture on a work truck, bright aluminum is the go-to choice. Scratches and swirl marks also tend to blend into the diamond plate instead of standing out. This compact, deep aluminum saddle box is sized for mid-size trucks and mounts across the bed rails behind the cab, adding depth for bulkier gear with 9.0ft³ of secured, weather-sealed storage. A five-piece welded aluminum diamond-plate body with a reinforced C-channel front keeps it strong yet light, and a full-perimeter D-shaped weather seal locks out rain and dust.
What's Included:
137 Series mid-size deep aluminum crossover (saddle) tool box in bright aluminum
1Key UltraLock push-button locks, keyed alike
Under-rail mounting clamps and hardware for a no-drill install
Welded Aluminum Diamond-Plate Build A five-piece welded aluminum diamond-plate body with a reinforced C-channel front panel keeps this box strong yet light. It resists jobsite abuse and road salt without adding the weight of a steel box. This one is finished in clear ARMOR TUF powder coat over bright aluminum diamond plate.
Bright Aluminum Clear ARMOR TUF Finish A clear ARMOR TUF powder coat protects the raw aluminum diamond plate while keeping that bright, traditional work-truck look. It resists corrosion, road salt and fading without hiding the diamond-plate texture.
1Key UltraLock Security Tamper-resistant push-button locks sit recessed when locked, giving a quick visual cue your gear is secured. The 1Key UltraLock system lets you code multiple boxes on a truck, or a whole fleet, to a single key.
Full-Perimeter Weather Seal A memory-resistant D-shaped, multi-ridge weather strip runs the entire lid perimeter to keep rain, dust and debris off your tools, so your gear stays dry and ready in any weather.
Reinforced Lid With Gas Struts Gas struts hold the reinforced lid open near 90 degrees for easy one-handed access, and welded strut shields protect them from damage. The steel-reinforced lid resists flex and stands up to daily use.
Saddle Fit Across The Bed The box straddles the top bed rails behind the cab, keeping your bed floor open for sheet goods and cargo. Enhanced tie-down buckles and 12V PowerSync-ready access round out a box built for working trucks.
Reinforced Body, Automotive-Grade Hardware Weather Guard specifies a five-piece welded body for the 137-0-04, with a C-channel reinforced front panel and a heavy-duty C-channel reinforced lid, so the box stays square when it is loaded and when someone stands on the lid. The latch is an automotive dual-stage rotary mechanism, the same style a truck door uses, so it pulls the lid down onto the seal instead of relying on a friction catch. A welded gas strut shield keeps loose tools from knocking the strut mount out of line. The D-shaped ribbed weather strip is memory resistant, so it springs back after years of closing rather than taking a set and letting water track in.
Fitment & Compatibility
Truck Class
Example Trucks
Fit
Mid-size
Colorado/Canyon, Ranger, Tacoma, Frontier, Dakota
✓ Yes, designed for mid-size beds
Full-size 1/2-ton and up
F-150, Silverado/Sierra 1500 to 3500, Ram 1500 to 3500
● Measure first, this compact box is shorter than a full-size crossover
Compact unibody
Maverick, Santa Cruz
✗ Not recommended, verify bed rail width first
Fit guidance: This is a compact, mid-size crossover box that mounts across the two bed rails just behind the cab, so it straddles the bed and leaves the bed floor open. At about 62" wide it is sized for mid-size pickups such as the Chevrolet Colorado, GMC Canyon, Ford Ranger, Toyota Tacoma and Nissan Frontier. Because it sits on the rails rather than the bed floor, it works with short and long mid-size beds. Always measure your bed rail width and check clearance behind the cab before ordering.
Specifications
Series: 137 Series Aluminum Crossover (Saddle)
Style: Mid-Size Deep, single-lid saddle/crossover
Storage Capacity: 9.0ft³
Exterior Dimensions: 62"L x 20"W x 18"H
Material: Aluminum diamond plate, five-piece welded body, C-channel reinforced front
Finish: Bright Aluminum, Clear ARMOR TUF
Lid: Reinforced, opens near 90 degrees, gas struts with welded strut shields
Type: Saddle mount across the top bed rails, clamp-in with no drilling · Time: About 20 to 30 minutes · Tools: Socket or wrench set and a tape measure; no drill needed with the included under-rail clamps · Difficulty: Easy, best done with two people for the lift
Set the box across the two bed rails behind the cab and center it left to right. Hook the included clamps under each bed rail and tighten the hardware evenly so the box sits flat and the lid seals all the way around. Because the box is wide, have a second person help lift and hold it while you clamp it down. Follow the Weather Guard installation instructions for exact clamp placement and torque.
Watch the installation walkthrough:
Resources
Everything you need for your Weather Guard 137 Aluminum Crossover Truck Tool Box, Mid-Size Deep, Bright Aluminum, in one place.
Warranty. Limited Lifetime Warranty from Weather Guard against defects in materials and workmanship.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
About Weather Guard
Weather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.
Known for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.
Backed by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.
Authorized Weather Guard dealer. Prestige Truck is an authorized dealer of Weather Guard, so every tool box, rack and storage product you buy is 100% genuine and factory-new, covered by the full Weather Guard manufacturer warranty, and backed by our own US-based support team.
Compare The Range
How this compares to similar models
The closest alternatives side by side, so you do not have to keep tabs open.
Weather Guard's official hardware video zooms in on the clamp and bolt kit that secures its truck boxes to the bed rails without drilling. It is a helpful close-up companion to the full box install and shows how the mounting brackets hook under the rail lip and tighten down. Use it alongside the printed instructions that ship with the box.
How the 1Key UltraLock System Works
A step-by-step look from Weather Guard at what the 1Key UltraLock actually does: how the cylinder accepts a new code, why the red push button retracts when the box is locked, and how the latch pulls the lid down against the seal. Worth two minutes before you set the box up.
How to Code Your 1Key UltraLock Lock
Weather Guard's official walkthrough for coding the lock so this box opens with the same key as the rest of your Weather Guard boxes. Follow it once when the box arrives and you can stop carrying a separate key for every lid on the truck.
Frequently Asked Questions
Straight answers on specs, fit and support
Will the 137-0-04 fit my truck?
This is a compact, mid-size crossover box about 62" wide, so it fits mid-size pickups such as the Chevrolet Colorado, GMC Canyon, Ford Ranger, Toyota Tacoma and Nissan Frontier. It mounts across the top bed rails behind the cab. Measure your bed rail width and check clearance behind the cab first, and note it is shorter than a full-size crossover box.
Does it require drilling to install?
No. The box ships with under-rail clamps and hardware, so it mounts without drilling into your truck. Most installs take about 20 to 30 minutes and go easiest with two people to lift and hold the box while you clamp it down.
How secure is this Weather Guard box?
It uses the Weather Guard 1Key UltraLock system with tamper-resistant push-button locks that sit recessed when locked, so you get a quick visual cue your gear is secured. The 1Key design also lets you code multiple boxes on a truck or a whole fleet to a single key.
How does the bright aluminum hold up outdoors?
Very well. The aluminum body will not rust like steel, and the clear ARMOR TUF coating plus the full-perimeter D-shaped weather seal keep water, salt and dust out while protecting the finish. A rinse and a wipe keep the diamond plate bright.
Does the clear aluminum finish need much upkeep?
Not really. The clear ARMOR TUF powder coat seals the aluminum, so it will not rust like bare steel and it wipes clean with mild soap and water. The bright diamond plate hides light scuffs well and keeps its look with basic care.
What is it made of and how big is it?
It is built from welded aluminum diamond plate with a clear ARMOR TUF powder coat over bright aluminum diamond plate. The exterior measures 62"L x 20"W x 18"H with 9.0ft³ of storage, and it ships at about 76 lb, so it is strong yet lighter than a comparable steel box.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
Weather Guard 137 Aluminum Crossover Truck Tool Box, Mid-Size Deep, Bright Aluminum (137-0-04)
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Weather Guard 372 Hi-Side Truck Tool Box, 72 in Bright Aluminum (372-0-02)
Weather Guard 116 Steel Crossover Truck Tool Box, Full-Size Extra-Wide, Brite White (116-3-03)
