Add a tier to your Weather Guard steel van shelving unit with the 9146-3-01, a mid-depth shelf that measures 60" across and 13.5" deep. A 13.5" tray takes totes and boxed inventory in the middle of the range, and four sliding dividers hold it steady. This 60" shelf runs the length of a big cargo wall, and its heavy-gauge hemmed steel keys onto the slots by hand. It is a fast way to get more from a shelving unit you already run, built in the USA and covered by a Weather Guard limited lifetime warranty.
What's Included:
60" x 13.5" Weather Guard steel accessory shelf in Brite White
Set of four adjustable dividers
Mounting hardware for Weather Guard van shelving end panels
Weather Guard installation instructions
Features
Adds Organized Van Storage This 60" wide by 13.5" deep shelf drops into a Weather Guard steel van shelving unit to expand how much you carry without adding a second cabinet, so your parts and tools stay sorted and reachable.
Four Adjustable Dividers Included A set of four dividers slides along the shelf to wall off fasteners, fittings and small cases so nothing shifts or spills while you drive between jobs.
Heavy-Gauge Steel, Fully Hemmed Formed from heavy-gauge steel with fully hemmed edges, the shelf carries real jobsite weight and resists bending, and the smooth folded edges are safer on hands and gear.
Brite White ARMOR TUF Finish The signature Brite White ARMOR TUF powder coat reflects light to brighten a dark cargo area and protects the steel against rust and daily wear for years of dependable service.
Tool-less Repositioning The shelf keys into the end-panel slots of your Weather Guard unit and moves up or down without tools, so you can retune the spacing as your load changes.
Fitment & Compatibility
Weather Guard Shelving
Fit
13.5" deep shelf position on a Weather Guard steel van shelving unit
✓ Yes, direct fit
Weather Guard end-panel + shelf system (adjustable series)
✓ Yes, adds one shelf
Folding shelves, drawer modules or another brand's shelving
✗ No, this shelf mounts to Weather Guard steel van shelving units only
Fit guidance: This is an add-on shelf for Weather Guard steel van shelving units, not a freestanding shelf. It measures 60" wide by 13.5" deep and keys into the end-panel slots of a matching-depth Weather Guard unit. Confirm your unit is the Weather Guard adjustable steel series and has an open slot at the height you want before ordering, and match the shelf depth to your unit (this one is 13.5" deep).
Specifications
Type: Adjustable accessory shelf
Fits: Weather Guard steel van shelving units (end-panel + shelf system)
Shelf Size: 60"W x 13.5"D
Material: Heavy-gauge steel, fully hemmed edges
Finish: Brite White ARMOR TUF powder coat
Included: Set of four adjustable dividers
Adjustability: Tool-less, reposition on the unit's end-panel slots
Weight: About 23 lb (shipping)
Product Dimensions: About 60"W x 13.5"D x 2"H
Product Weight: About 21 lb
Shipping Dimensions: About 63"L x 16.125"W x 4.75"H
Shipping Weight: About 21 lb
Install Time: About 0.3 hours
Warranty: Limited Lifetime
Made In: USA
Installation
Type: Bolt-on / slot-in accessory shelf for Weather Guard van shelving units · Time: About 5 to 10 minutes · Tools: Basic hand tools; no drilling · Difficulty: Easy, one person
Set the shelf into the end-panel slots at the height you want and secure it with the included hardware, then slide the four dividers into place to section off your load. No drilling into the shelf or the van is needed.
Watch the installation walkthrough:
Warranty, Shipping & Returns
Warranty. Weather Guard Limited Lifetime Warranty against defects in materials and workmanship.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
About Weather Guard
Weather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.
Known for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.
Backed by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.
Authorized Weather Guard dealer. Prestige Truck is an authorized dealer of Weather Guard, so every tool box, rack and storage product you buy is 100% genuine and factory-new, covered by the full Weather Guard manufacturer warranty, and backed by our own US-based support team.
Accessorizing Weather Guard Van Shelving
Weather Guard's own guide to installing a shelf-mounted module accessory shows how their van shelving units are built to accept add-ons like this accessory shelf. It is a helpful companion look at how components bolt to the same end panels and how you can tailor a unit to the way you work. Use it to picture how extra shelves and modules combine on a single Weather Guard van shelving unit.
Van Shelf Back Panels and Door Accessories Install
Weather Guard's step-by-step guide covers fitting the back panels and door accessories that turn an open van shelf unit into a closed, secure one. Back panels stop small parts dropping down behind the shelving, and the doors keep contents in place and out of sight.
It is the reference to use when you are adding to shelving you already own. Because it is the manufacturer's own video, it shows the correct fixing points and the order the parts go together.
Conquer the Chaos in Your Work Van
Weather Guard's own short film on van storage, built around the difference between a van you have to dig through and one where every item has a home. It shows the Weather Guard van range working as a single interior rather than as separate parts bolted in over time.
It is a useful orientation if you are planning an upfit and are not sure where to start. Because it is manufacturer content, the shelving, bins and flooring shown are the current Weather Guard line rather than an older catalog.
Frequently Asked Questions
Straight answers on specs, fit and support
What size is the 9146-3-01 accessory shelf and what unit does it fit?
The 9146-3-01 shelf measures 60" wide by 13.5" deep, so it adds one level to a Weather Guard steel van shelving unit built to the same 13.5" depth. It keys into the end-panel slots, so check that your Weather Guard adjustable unit has an open position at the height you want.
Does it come with dividers?
Yes. Four adjustable dividers are included; on the 13.5" shelf they section off totes, tool cases and boxed stock so nothing shifts while you drive.
Will this work with any van shelving brand?
No. It is built specifically for Weather Guard steel van shelving units and keys into their end-panel slots, and it is sized at 60" wide by 13.5" deep, so match it to a Weather Guard unit of the same 13.5" depth. It does not fit folding shelves, drawer modules or other brands' shelving.
Do I need to drill anything to install it?
No drilling is required. The shelf seats into the existing slots on your Weather Guard unit's end panels and secures with the included hardware, so installation takes only a few minutes with basic hand tools.
How is this item shipped and what should I check on delivery?
This 60" shelf ships at about 23 lb by freight or parcel depending on size, in Weather Guard packaging. Inspect the carton at delivery, note any damage on the delivery receipt before you sign, and check the contents against the packing list.
Is it made in the USA and backed by a warranty?
Yes. Weather Guard builds this in the USA and backs it with a Limited Lifetime Warranty against defects in materials and workmanship. Keep your receipt as proof of purchase for any future claim.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
