Weather Guard ITEMIZER Aluminum Stacked Drawer Unit, White, 2 Drawer (326-3)

Save floor space and go vertical with the Weather Guard 326-3 ITEMIZER stacked drawer unit. This lightweight aluminum tower is about 49" long but only 12-1/4" wide, stacking two roller-mounted drawers that each glide out to full extension. It fits tight against a van wall or wheel well where a wide lateral unit will not, adjustable dividers sort each drawer, a built-in lock mount takes an optional camlock, and the Bright White ARMOR TUF finish holds up to daily use.

What's Included:

• One ITEMIZER aluminum stacked drawer unit, bright white
• 2 roller-mounted drawers with adjustable dividers
• Built-in lock mount for an optional camlock
• Mounting hardware
• Weather Guard installation instructions

Features

Lightweight All-Aluminum Build
The ITEMIZER 326-3 is made from lightweight aluminum, so it adds minimal payload while giving you organized, roll-out storage for small parts and tools inside a van or truck bed.

2 Roller-Mounted Stacked Drawers
2 stacked drawers glide open on rollers to full extension, so you can reach everything without crawling into the van. Each drawer carries up to 75 pounds of parts or tools.

Adjustable Dividers
Every drawer accepts adjustable dividers, so you can split each compartment into cells sized to fasteners, fittings and small parts and rearrange them whenever your inventory changes. The drawer compartment measures about 4-1/4" high, 10-1/2" wide and 46-1/2" long.

Optional Camlock Security
A lock mount is built in for an optional camlock, so you can add keyed security to keep parts contained and secure. The camlock is sold separately.

Anti-Skid Top, Stackable
Anti-skid strips across the top give work boots sure footing, and the unit can be stacked with additional ITEMIZER units when you need to grow your storage without taking more floor space.

Bright White ARMOR TUF Finish
A Bright White ARMOR TUF powder coat resists rust, scuffs and fading for years of dependable service in the demanding environment of a work vehicle.

Fitment & Compatibility

Specifications

• Series: ITEMIZER Aluminum Stacked Drawer Unit (Model 326-3)
• Configuration: 2 stacked roller-mounted drawers, adjustable dividers
• Exterior Dimensions: 49"L x 12-1/4"W x 12-1/4"H
• Drawer Compartment: About 4-1/4"H x 10-1/2"W x 46-1/2"L per drawer
• Material: Aluminum
• Drawer Load Rating: Up to 75 lb per drawer
• Roll-Out: Roller-mounted, full drawer extension
• Lock: Lock mount provided for an optional camlock (camlock sold separately)
• Top Surface: Anti-skid strips
• Finish: Bright White ARMOR TUF powder coat
• Mounting: Bolts down; stackable with additional ITEMIZER units
• Made In: USA
• Warranty: Limited Lifetime
• Product Dimensions: 49"L x 12-1/4"W x 12-1/4"H
• Drawer Configuration: Two stacked drawers
• Drawer Capacity: 75 lb
• Mounting Location: Floor

Installation

Type: Bolt-in, van or bed floor  ·  Time: About 30 minutes to 1 hour  ·  Tools: Drill and bits, wrench or socket set, tape measure, marker, zinc-rich primer  ·  Difficulty: Easy to moderate with basic hand tools

Position the unit on the floor, mark and drill the mounting holes, then bolt it down with the supplied hardware. Seal drilled holes with zinc-rich primer, especially on aluminum floors. Add an optional camlock in the provided lock mount if you want keyed security. When stacking, fasten the upper unit per the Weather Guard instructions.

Resources

Everything you need for your Weather Guard ITEMIZER Aluminum Stacked Drawer Unit, White, 2 Drawer, in one place.

• Official Weather Guard ITEMIZER Aluminum Stacked Drawer Unit, White, 2 Drawer installation manual (PDF), the manufacturer's step-by-step guide covering mounting, included hardware and torque specs.

Warranty, Shipping & Returns

Warranty. Limited Lifetime Warranty from Weather Guard against defects in materials and workmanship.

Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.

Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.

Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.

About Weather Guard

Weather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.

Known for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.

Backed by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.