Protect your cab and back glass from shifting loads with the Weather Guard 1906-3-02 Protect-A-Rail steel cab protector in Brite White. This is the classic steel screen guard: a full diamond-mesh panel in a welded steel frame that stops cargo, ladders and gear from sliding into the rear window during hard stops. The bright white ARMOR TUF powder coat stands up to sun, rain and road salt for years of service, and a center window cutout keeps a sight line out the back. Note that the Protect-A-Rail mounts using a vehicle-specific mounting kit that is sold separately, so order the kit that matches your truck along with the guard.
What's Included:
1906-3-02 Protect-A-Rail steel screen cab protector, Brite White
Diamond-mesh steel panel in a welded steel frame with protective end caps
Note: the vehicle-specific Protect-A-Rail mounting kit is required and is sold separately, not included
Features
Steel Diamond-Mesh Cab Screen A full diamond-mesh steel panel in a welded frame shields the rear cab window from shifting cargo, ladders and loose gear. Steel gives it the strength to take a hit that a lighter guard would not, which is the whole point of a cab protector.
Brite White ARMOR TUF Finish The frame and mesh wear a Brite White ARMOR TUF powder coat that resists rust, chips and fading through sun, rain and road salt. The white finish is a clean, high-visibility look that pairs with white and light-colored trucks and fleet vehicles.
Center Window Cutout A rectangular cutout in the middle of the mesh keeps a sight line out the back window so you can still see behind you while the rest of the panel guards the cab.
Built For Full-Size Pickups The Protect-A-Rail is sized to protect the cab on full-size pickups and to provide heavy-duty cab protection for work trucks that haul loose or shifting loads.
Vehicle-Specific Mounting Kit, Sold Separately The Protect-A-Rail mounts with a Weather Guard mounting kit that is custom fit to your truck and is sold separately from the guard. Buy the correct kit for your make and model so the protector bolts up cleanly. The kit is not included with this item.
Limited Lifetime Warranty Weather Guard backs the 1906-3-02 with a Limited Lifetime Warranty against defects in materials and workmanship, so a hard-working steel cab protector is covered for the long haul.
✓ Yes, with the matching mounting kit (sold separately)
Mid-size and compact
Ranger, Colorado, Tacoma, Frontier, Maverick
✗ No, this is a full-size cab protector
Fit guidance: The Protect-A-Rail is a full-size steel cab protector, not a bolt-on kit. It mounts with a Weather Guard mounting kit that is custom fit to your specific truck and is sold separately, so you must order the correct kit for your make and model along with the guard. Weather Guard and its dealers list this kit as required for the Protect-A-Rail line; confirm the kit that fits your truck before ordering. It is not designed for mid-size or compact pickups.
Center Cutout: Yes, rectangular window opening for a rear sight line
Assembled Size: About 71.3" across x 27.4" tall x 2.6" deep
Shipping Weight: 39 lb
Mounting: Vehicle-specific Protect-A-Rail mounting kit required, sold separately (not included)
Fitment: Full-size pickups
Origin: Made in USA
Warranty: Limited Lifetime
Product Dimensions: 71-1/2"W x 2-3/4"D x 27-1/2"H
Weight: About 38-1/2 lb
Mounting Location: Bed rails, mounting kit required and sold separately
Made In: USA
Installation
Type: Mounts to the truck with a vehicle-specific Protect-A-Rail mounting kit (sold separately) · Time: Varies by truck and mounting kit · Tools: Socket and wrench set; follow the instructions that come with the vehicle-specific mounting kit · Difficulty: Moderate, plan on a second person to hold the steel panel while you fasten it
Installation uses a Weather Guard Protect-A-Rail mounting kit that is custom fit to your truck and purchased separately. Order the kit for your exact make and model, then follow the kit instructions to anchor the guard so the mesh sits square behind the cab. The steel panel is heavy, so use a second person to hold it while you bolt it down. Because mounting hardware is not included with the guard, confirm you have the right kit before you start.
Watch the installation walkthrough:
Warranty, Shipping & Returns
Warranty. Limited Lifetime Warranty from Weather Guard against defects in materials and workmanship.
Freight shipping. This item is oversized, so it ships by freight to the lower 48 states and typically arrives in 3 to 7 business days. The freight cost is shown at checkout before you pay.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
Compliance. Installation requires a vehicle-specific Weather Guard Protect-A-Rail mounting kit, sold separately (not included with this cab protector).
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Weather Guard
Weather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.
Known for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.
Backed by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.
Authorized Weather Guard dealer. Prestige Truck is an authorized dealer of Weather Guard, so every tool box, rack and storage product you buy is 100% genuine and factory-new, covered by the full Weather Guard manufacturer warranty, and backed by our own US-based support team.
See it on a truck
Best Upgrade for Your Truck
This is Weather Guard's own brand film about outfitting a working pickup, built on the idea that the truck should already be loaded and organized before the day starts. It puts the bed and rail equipment in the context of a real work day rather than a spec sheet.
Watch it if you are still deciding how much storage a truck actually needs. It is the clearest short look at how Weather Guard boxes, racks and drawer units are meant to work together on one vehicle, and it comes straight from the manufacturer rather than a reseller.
Weather Guard Defender Series Truck Rack Install
Weather Guard's Defender Series install video shows the lightweight aluminum truck rack going onto a pickup with no drilling required. You see the compression clamps grip the bed rails and the crossbars set up to carry ladders, lumber and pipe, rated to about 800 pounds. It makes clear how quickly the rack mounts and how the ladder stops keep a load in place. It is a helpful look at the rack in place before you buy or install your own.
Weather Guard Steel Truck Rack Install
This official Weather Guard guide shows how to install a steel truck rack for hauling ladders, lumber and long loads over the bed. You watch the rack mount to the bed and get tightened down, with the load bars set for ladders and pipe. It gives a clear picture of how the rack goes on and how much it adds to a truck's hauling capability. It is the manufacturer's own reference for setting up the rack correctly.
Best Upgrade for Your Truck
This is Weather Guard's own brand film about outfitting a working pickup, built on the idea that the truck should already be loaded and organized before the day starts. It puts the bed and rail equipment in the context of a real work day rather than a spec sheet.
Watch it if you are still deciding how much storage a truck actually needs. It is the clearest short look at how Weather Guard boxes, racks and drawer units are meant to work together on one vehicle, and it comes straight from the manufacturer rather than a reseller.
Weather Guard Defender Series Truck Rack Install
Weather Guard's Defender Series install video shows the lightweight aluminum truck rack going onto a pickup with no drilling required. You see the compression clamps grip the bed rails and the crossbars set up to carry ladders, lumber and pipe, rated to about 800 pounds. It makes clear how quickly the rack mounts and how the ladder stops keep a load in place. It is a helpful look at the rack in place before you buy or install your own.
Weather Guard Steel Truck Rack Install
This official Weather Guard guide shows how to install a steel truck rack for hauling ladders, lumber and long loads over the bed. You watch the rack mount to the bed and get tightened down, with the load bars set for ladders and pipe. It gives a clear picture of how the rack goes on and how much it adds to a truck's hauling capability. It is the manufacturer's own reference for setting up the rack correctly.
Frequently Asked Questions
Straight answers on specs, fit and support
Does this cab protector come with a mounting kit?
No. The Protect-A-Rail mounts with a Weather Guard mounting kit that is custom fit to your truck and is sold separately, so the mounting hardware is not included with the guard. Weather Guard and its dealers list this kit as required for the Protect-A-Rail line, so order the kit that matches your make and model along with the 1906-3-02.
Will it fit my truck?
It is built for full-size pickups such as the F-150, Silverado and Sierra 1500 through 3500, Ram 1500 through 3500, Tundra and Titan, using the matching vehicle-specific mounting kit. Confirm the correct Protect-A-Rail kit for your make and model before ordering. It is not made for mid-size or compact trucks.
What is the difference between the white 1906-3-02 and the black 1906-5-02?
They are the same steel Protect-A-Rail screen cab protector in different finishes. The 1906-3-02 is Brite White ARMOR TUF and the 1906-5-02 is Gloss Black ARMOR TUF. Pick the color that matches your truck or fleet; the protection, size and mounting are the same.
What is it made of?
It is a welded steel frame with a steel diamond-mesh screen, finished in Brite White ARMOR TUF powder coat. Steel gives it the strength to stop shifting cargo, and the powder coat resists rust, chips and fading.
Can I still see out the back window?
Yes. A rectangular cutout in the center of the mesh keeps a sight line out the rear window while the rest of the panel screens the cab from shifting loads.
Is it covered by a warranty?
Yes. The 1906-3-02 is made in the USA and backed by a Weather Guard Limited Lifetime Warranty against defects in materials and workmanship.
