This is the replacement and upgrade T-slot rail set for the BAK Revolver X4ts on the 2022-2026 Nissan Frontier with the 5' bed. These are the same integrated, full-length T-slot rack rails that make the X4ts rack-ready: they clamp to your factory bed rails and accept crossbars, bike and kayak carriers, cargo baskets, and roof-top tents over the cover. Order this kit to replace damaged rails or to convert a matching X4ts cover (part 80538RK) to the T-slot rack setup. Rails only, cover not included.
What's Included:
Pair of BAK Revolver X4ts T-slot rack rails
Clamp and mounting hardware
Install instructions
(Roll-up cover not included)
Features
Integrated T-Slot Rack Rails The full-length T-slot rails are what make the X4ts rack-ready. They accept crossbars, bike and kayak carriers, cargo baskets, and roof-top tents so you can carry gear over the closed cover while the bed stays locked.
Direct Replacement Fit Matched to the X4ts cover for the 2022-2026 Nissan Frontier, these rails clamp to the same factory bed rails as the original set for a direct, no-drill replacement.
No-Drill Clamp-On Install The rails clamp to your factory bed rails with the included hardware, so there is no cutting, trimming, or drilling. Basic hand tools and the Revolver install sheet are all you need.
Fitment & Compatibility
Years
Make
Model
Bed
Fit
2022-2026
Nissan
Frontier
5'
✓ Yes, matches X4ts cover 80538RK
Fit guidance: These rails fit the 2022-2026 Nissan Frontier 5' bed as the matched replacement for X4ts cover 80538RK. Rails only; the roll-up cover is sold separately.
Specifications
Fitment: 2022-2026 Nissan Frontier, 5' bed
Type: Replacement/upgrade T-slot rack rail set for the BAK Revolver X4ts
Includes: Pair of T-slot rails + clamp hardware (cover not included)
Rack compatibility: Accepts crossbars, carriers, cargo baskets, and roof-top tents
Install: No-drill, clamp-on to the factory bed rails
Pairs with cover: BAK Revolver X4ts part 80538RK
Weight: About 18 lb
Installation
Type: No-drill, clamp-on to the factory bed rails · Time: About 20 to 40 minutes · Tools: Basic hand tools; no drilling required · Difficulty: DIY-friendly
Clamp each T-slot rail to the factory bed rail and tighten evenly. Follow the BAK Revolver install sheet for clamp placement and torque.
Watch the model-specific installation walkthrough:
Resources
Everything you need for your BAK Revolver X4ts Replacement T-Slot Rail Kit for 2022-2026 Nissan Frontier, in one place.
Warranty. 5-year limited warranty from BAK Industries against defects in materials and workmanship. Does not cover accident damage, neglect, or improper installation.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
About BAK Industries
BAK Industries has engineered premium truck bed covers in the USA for decades and is a flagship tonneau brand of RealTruck, one of the largest truck-accessory manufacturers in North America. Its hard-folding BAKFlip and retractable Revolver lines set the benchmark for the category, pairing heavy-duty aluminum construction with a low-profile, weathertight design.
Every BAK cover is built for real-world truck use: no-drill, clamp-on installation that mounts in about 30 minutes, full bed access when folded or rolled back, and reinforced latching that keeps cargo secure and dry. The lineup runs from the value-focused BAKFlip MX4 and G2, to the flagship FRP-panel F1 and FiberMax, to the industrial Revolver X2 and X4s roll-ups, covering nearly every popular truck and bed length.
Backed by US-based product support and a multi-year manufacturer warranty, a BAK cover is a buy-it-once upgrade that protects tools, cargo, and gear while giving a truck a cleaner, more finished look.
Authorized BAK Industries dealer. Prestige Truck is an authorized dealer of BAK Industries, so every tonneau cover and accessory you buy is 100% genuine and factory-new, covered by the full BAK Industries manufacturer warranty, and backed by our own US-based support team.
X4TS At SEMA
A show-floor look at the Revolver X4TS with its integrated T-slot rails, the rack-ready roll-up that carries gear on top while sealing the bed underneath.
A quick way to see the T-slot system that separates the X4TS from the standard X4s.
X4TS Install On A Ram 1500
Installing the Revolver X4TS on a Ram 1500, including seating the T-slot rails and setting the roll, in about ten minutes.
Useful for seeing how the rack-ready rails mount without drilling, and where they sit relative to the bed rail cap before you order crossbars.
X4TS Install On A Toyota Tundra
The Revolver X4TS install shown on a 2022 Toyota Tundra, another angle on seating the T-slot rails and the clamp-on setup, filmed across more than fifteen minutes.
A good reference for how the cover and its rails go onto a Toyota bed rail profile, which differs from the domestic trucks.
Frequently Asked Questions
Straight answers on specs, fit and support
What exactly comes in this kit?
This is a rails-only kit: the pair of BAK Revolver X4ts T-slot rack rails and their clamp hardware for the 2022-2026 Nissan Frontier 5' bed. It does not include the roll-up cover. If you need the full cover and rails, order the complete X4ts cover instead.
Will these rails fit my X4ts cover?
Yes, these are the matched T-slot rails for the X4ts cover part 80538RK, which fits the same 2022-2026 Nissan Frontier. They clamp to the factory bed rails exactly like the original set.
Why would I buy rails separately?
Two reasons: to replace rails that were damaged or lost, or to restore the T-slot rack capability on a cover. The rails are what let you mount crossbars, carriers, and tents over the closed cover.
Do the T-slot rails require drilling?
No. Like the cover, the rails clamp to your factory bed rails with the included hardware, so there is no drilling or cutting. Follow the BAK Revolver install sheet for clamp placement.
What can I mount on the T-slot rails?
The T-slot channel accepts compatible crossbars, bike and kayak carriers, cargo baskets, and roof-top tents. Always stay within the load limits set by your rack or accessory maker, and distribute the weight evenly along both rails.
How long does it take to install the rails?
Most people fit the rails in about 20 to 40 minutes with basic hand tools. Set each rail on the factory bed rail, clamp it, and tighten evenly, then recheck the clamps after your first week of driving.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
