Extang Endure ALX Hard Folding Tonneau Cover for 2007-2021 Toyota Tundra (5'7" Bed, without Deck Rail System)

The Extang Endure ALX is a hard folding tonneau cover built from four half-inch EnduraShield TPO panels on aluminum frames that sit flush with your truck's bed rails. It opens from the tailgate with a one-hand twist-and-lift rotary latch that catches itself shut on the way down. Fold the panels forward for two thirds of the bed, or stand the whole cover against the cab on its prop rods for the full box. Extruded seals run along every seam, it carries up to 500 lb spread evenly and it goes on in under an hour using its own rails and clamps, with no drilling. It is aimed at owners who want a low, factory-looking cover without giving up the bed. Part number 80460 is the 5'7" bed application for the 2007-2021 Toyota Tundra, without Deck Rail System.

What's Included:

• Endure ALX hard folding tonneau cover
• Mounting rails
• Clamps
• Hardware kit
• Install guide

Features

One-Hand Twist-and-Lift Latch
The Secure Rotary Latch System sits at the tailgate. A twist of the handle and a lift releases the rear panel with one hand. Drop the cover back onto the rails and it latches itself, with no second catch to fasten.

Two Thirds or the Whole Bed
Integrated nylon buckle straps hold the folded stack so it cannot shift on the road. When you want the box completely clear, built-in prop rods stand the whole cover flat against the cab in seconds.

Sealed at Every Seam
Extruded weather seals run along each seam where panels meet and down both sides where the cover meets the bed rails. They are there to keep moisture out of the bed so your cargo stays protected from the weather.

Half-Inch TPO Panels, Aluminum Framed
Each of the four panels is a half-inch-thick sheet of EnduraShield TPO, an automotive-grade polymer that resists impacts, scrapes and UV fading. An aluminum frame in each panel supplies the stiffness, enough for a 500 lb load spread evenly over it.

Clamp-On Install, No Drilling
The cover sits on the rails that ship with it, held down by four clamps that bite onto the inner bed walls. Nothing on the truck gets cut, drilled or modified. Extang puts the whole fit at under an hour.

Flush Fit, Factory Look
The Endure ALX sits low and flush with the bed rails. The aluminum frame wears a matte black EnduraCoat finish and the textured black polymer hinge caps match the panels and the factory rail caps, so it looks factory and wipes clean easily.

Fitment & Compatibility

Specifications

• Cover Type: Hard folding, four panel
• Material: Aluminum frame, EnduraShield TPO panels
• Panel Thickness: 1/2 in
• Finish: Matte black EnduraCoat
• Bed Access: 2/3 with buckle straps, full with prop rods
• Load Capacity: 500 lb, evenly distributed
• Sealing: Extruded weather seals at every seam
• Security: Latches automatically when closed, no keyed lock
• Drilling Required: No, clamp-on
• Install Time: Under 1 hour
• Install Difficulty: Level 1, simple
• Fits: 2007-2021 Toyota Tundra, 5'7" bed
• Weight: About 66 lb
• Made In: USA, assembled in Michigan
• Warranty: 5 year limited

Installation

Type: Clamp-on, no drilling · Time: Under 1 hour · Tools: Included rails, clamps and hardware, plus basic hand tools · Difficulty: Level 1, simple

The Endure ALX drops onto the rails that come in the box and four clamps hold it there, all worked with basic hand tools. Nothing on the truck is cut or drilled. Extang grades it Level 1, its simplest, with the whole job inside an hour. Before you drive, check that all four clamps are tight and the cover is lying completely flat.

Watch the installation walkthrough:

Resources

Everything you need for your Extang Endure ALX Hard Folding Tonneau Cover for 2007-2021 Toyota Tundra (5'7" Bed, without Deck Rail System), in one place.

• Official Extang Endure ALX Hard Folding Tonneau Cover for 2007-2021 Toyota Tundra (5'7" Bed, without Deck Rail System) installation guide (PDF), the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.

Warranty, Shipping & Returns

Warranty. Extang's warranty stops the moment the cover is mishandled: driving with the panels folded but not buckled voids it, as does opening them before snow or ice is cleared off the top or towing the truck from its rear end. Accident damage, misuse, poor installation, modification and normal wear sit outside it too. What is covered is five years from the purchase date against defective materials or workmanship on the aluminum parts, bows, clamps, rails and hardware, for the original buyer with a dated receipt or registration on file. Claims start with a return authorization number from Extang customer service, with shipping back to Extang at your expense.

Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight or oversized parcel and typically arrives in 3 to 7 business days.

Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.

About Extang

Extang builds tonneau covers under its own brand names and assembles this one in Michigan, listing it as made in America. EnduraShield is its name for the TPO panel material, EnduraCoat for the frame finish and Secure Rotary Latch for the handle system Extang says it engineered itself.

Extang's other hard folding covers are the Solid Fold Toolbox 2.0 and the Solid Fold ALX. It describes the Endure ALX as the flush-mounted, low-profile one that sits level with the bed rails. The cover carries a five-year limited warranty from the date it is bought.

The Endure ALX is not a one-truck part. Extang lists parts for full-size Ford, Chevrolet, GMC and Ram pickups, for midsize trucks like the Tacoma, Colorado, Canyon, Frontier and Ranger, then for the shorter beds on the Maverick, Ridgeline and Gladiator.