Gator SFX Soft Tri-Fold Tonneau Cover for 2015-2020 Ford F-150 (8' Bed)

$239.99
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear

Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

See it on a truck

Installs in minutes
Opens in one smooth motion
Upgraded frame Upgraded frame
Clamps tuck into the bows Clamps tuck into the bows
Long-lasting vinyl Long-lasting vinyl
Folds forward for access Folds forward for access

Features

  • Installs in Minutes: The cover arrives assembled and clamps to the bed flange with no drilling, and on most trucks the clamps tighten by hand. If a plastic bed rail cap hangs below the metal flange (Gator names 2004-14 and 2021 F-150 and 2009-19 Ram as common cases), trim the cap so the clamps reach metal. The 2024+ Ranger and Tacoma use brackets and a Torx driver.
  • Opens in One Smooth Motion: Spring-loaded clamps release and grab in a single smooth movement, so opening the cover and latching it shut takes seconds and it closes firmly every time.
  • Upgraded Frame: A heavy-duty aluminum frame carries support bows that Gator says are now 70% larger, so the vinyl holds its shape instead of sagging under rain, hail or snow.
  • Clamps Tuck Into the Bows: When the cover folds, the clamps sit recessed inside the bows instead of rubbing on the fabric, which protects the vinyl from punctures. Stow the rear clamps before folding the second panel, as Gator's sheet directs.
  • Long-Lasting Vinyl: The top is a tough vinyl that resists tears and weather, and foam rubber seals on all four sides help keep rain, dirt and dust out of the bed. Gator says it tests the SFX from -40 to 180°F and from 0 to 95% humidity.
  • Folds Forward for Access: Fold the panels toward the cab to open two-thirds of the bed, then fasten the buckle straps and both tethers to drive with it open. For the full bed, the cover lifts off by hand in minutes on most trucks; Gator notes a tool may be needed on trucks with a factory track system.

Description & Fitment

A 2015-2020 F-150 with the 8' bed is the fit for this SFX. Long-bed half-tons usually do real work, and this cover keeps up: it folds forward and buckles down to open most of the floor, the foam seals guard the closed bed against rain and dust, and the spring-loaded clamps take one motion to open. It mounts on clamps without drilling and comes assembled.

Fitment & Compatibility

Ford
Years Model Bed Notes
2015-2020 F-150 8' —

Check your fit: the 2015-2020 F-150 with the 8' bed. If the plastic bed cap reaches below the metal flange, trim it per Gator's sheet.

Not for: the 6'7" bed (SF3313), the 5'7" bed (SF3312) or the 2021 and newer F-150 (SF3321 for the 8' bed).

About Gator

GATOR.

Gator makes truck bed covers in soft roll-up, soft tri-fold, hard folding and retractable styles, along with bed mats and floor liners. The brand started from one plain idea: a pickup bed should get protection that keeps working, season after season.

Gator builds its covers around everyday toughness and weather resistance, and it designs them for a home install. Every cover comes with Gator's install guide.

Buying Gator from Prestige Truck. Gator sells its covers only through authorized retailers, and Prestige Truck is an authorized Gator dealer. Every Gator cover we sell is new, genuine Gator product. Gator's warranty covers the original buyer and may ask for proof of purchase, so keep your Prestige Truck order receipt with your records.

Frequently Asked Questions

Is there an 8' version for the 2021+ F-150?

Yes. SF3321 is the 8' bed version for the 2021-2026 F-150.

Does it fit a Super Duty 8' bed?

No. The 2017-2026 F-250/F-350/F-450 Super Duty 8' bed takes SF3316.

Is the SFX waterproof?

No soft cover is watertight. Foam rubber seals on all four sides keep most rain, dirt and dust out, but some moisture can get in during heavy weather, so keep anything that must stay dry in a sealed bin.

Can I drive with the cover folded?

Yes, with every panel folded up and secured at the cab by the buckle straps and both tethers. When closed, all four clamps must be engaged. Driving with it partly open voids Gator's warranty.

Can I take the cover off completely?

Yes. It lifts off by hand in minutes on most trucks, which opens the whole bed. Gator notes a tool may be needed on trucks with a factory track system.

How do I keep the vinyl in good shape?

Wash with mild car soap and water. If you use a vinyl conditioner, pick a water-based one; Gator warns that silicone or petroleum products can crack and shrink the vinyl. Stow the rear clamps before folding so they can't puncture the fabric.

Installation

DifficultyHome install with Gator's install sheet
What's involvedCover sets on the bed and clamps under the bed rail flange, the plastic bed cap is trimmed if it hangs low
Tools
  • Hand-tightened clamps on most trucks
  • 2024+ Ranger and Tacoma use a Torx driver per their sheet

Here's the short version. Follow Gator's install sheet (below) for your truck's exact steps.

  1. Place the assembled cover over the cab end of the bed.
  2. Unfold it fully, align it at the cab and tail, then refold without shifting it.
  3. If the plastic bed rail cap hangs below the metal flange, trim it so the clamps grip the sheet metal.
  4. Open the tailgate and close the cover. Slide each rear clamp out to the bed wall and hook it under the metal flange; tighten by hand only.
  5. Tethers: on a plain metal flange, clamp the tether to the flange; with factory cargo rails, remove the end cap, fit the slide block in the rail at the front bow and tighten the knob.
  6. Cargo-management trucks: fit the bracket kit (clamp plate, washers, screws) and torque to 65 in-lb (7.3 Nm).

Stuck on a step? Ask our install experts

Specifications

Specifications
BrandGator
Part NumberSF3314
Cover TypeSoft tri-fold
Top MaterialTear- and weather-resistant vinyl, vinyl-grain finish
FrameHeavy-duty aluminum with enlarged support bows
LatchingSpring-loaded clamps
SealsFoam rubber, all four sides
Bed AccessUp to 2/3 folded; full bed with the cover removed
Tested Range-40 to 180°F, 0 to 95% humidity (Gator)
MountingClamp-on, no drilling; bed-cap trim on some trucks
Bed Length8'
UPC750289633146

More media

3 videos

Warranty, shipping & returns

  • Warranty

    Gator backs the SFX with a 2-year limited warranty against defects in materials and workmanship.
    • The hard parts (rails, clamps and bows) and the vinyl fabric are each covered for 2 years from the original purchase date.
    • If a cover, tarp or hardware part is defective, Gator repairs or replaces it at its choice, and may substitute a newer model of similar form and function.
    • Coverage is for the first buyer and can't be transferred. Gator asks for a registration on file or proof of original purchase (a dated, itemized receipt), so keep your order receipt.
    • To keep it valid: wash with mild car soap and water only; use only water-based vinyl conditioners, never ones with silicone or petroleum; drive only with all four clamps engaged, or with every panel folded and held at the cab by the buckle straps and both tethers; stow the rear clamps before folding; clear snow and ice before opening; check the cab clamps after the first week and now and then after that; and take the cover off before the truck is towed backward.
    • Claims need a return authorization number before anything is sent back. Gator may ask for the part, postage prepaid, to inspect it, and shipping for a repair or replacement is at the owner's cost; Gator charges nothing else for a covered repair or replacement.
    • Not covered: accident damage, neglect, unforeseeable use, improper installation or servicing, or anything not caused by a defect in material or workmanship. Your state may give you other rights as well.
    • For a claim or help registering your warranty, contact us with your order number and photos of the problem, and we'll walk you through Gator's process.
  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Order by 5 PM ET on a business day and it starts processing the same day.
    • Most orders arrive within 1-5 business days.
    • We email your tracking number as soon as it ships.
  • Inspect on delivery

    This cover ships folded in one long box, so check the vinyl for tears and the frame and clamps for bends before you install it. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.
Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question