Go Rhino Dominator Xtreme D2 Side Steps for 2007-2019 Chevrolet Silverado / GMC Sierra 2500 HD / 3500 HD & 2007-2018 Chevrolet Silverado / GMC Sierra 1500 (Crew Cab)
$609.99
Freight shippingCalculated at checkoutOnly 1 leftIn stock nowEstimated delivery
This Go Rhino Dominator Xtreme D2 listing covers the 2007-2019 Chevrolet Silverado / GMC Sierra 2500 HD / 3500 HD and 2007-2018 Chevrolet Silverado / GMC Sierra 1500. Each 4" wide galvanized steel step pad has hex-stamped tread for grip in wet or muddy conditions. It is finished in textured black under Go Rhino part number D224052T.
What's Included:
Driver and passenger side Dominator Xtreme D2 side steps with step pads
Dominator Xtreme mounting bracket kit with hardware for this application
Go Rhino installation guide
Tools are not included; the guide for your part number lists them, and a few applications also call for a drill.
Features
Drop Steps Below Each Door Welded hoops drop down from the main bar under the doors, bringing the step closer to the ground for an easier climb into a lifted truck or tall SUV.
4" Galvanized Hex-Tread Pads Each hoop carries a 4" wide galvanized steel step pad stamped with a hex tread pattern for grip in wet or muddy weather.
Removable, Paintable Pads The step pads unbolt from the hoops, so they can be painted to match the vehicle or replaced on their own.
One-Piece Steel Channel Bar The main bar is a single piece of shaped steel channel, giving a continuous OE-style line along the cab.
Zinc Plated, Then Powder Coated Zinc plating under a textured black powder coat gives the steel two layers of protection against rust.
Bolts to the Rocker Panel A Dominator Xtreme mount kit and install guide come with every pair, and most applications use existing holes in the rocker panel.
Fitment & Compatibility
Chevrolet
Years
Model
Notes
2007-2013
Silverado 1500
Crew Cab
2014-2018
Silverado 1500
Crew Cab, w/o Mud Flaps
2007
Silverado 2500 HD
Crew Cab
2008-2014
Silverado 2500 HD
Crew Cab, Gas engine only
2015-2019
Silverado 2500 HD
Crew Cab, Gas engine only, w/o Mud Flaps
2007
Silverado 3500 HD
Crew Cab
2008-2014
Silverado 3500 HD
Crew Cab, Gas engine only
2015-2019
Silverado 3500 HD
Crew Cab, Gas engine only, w/o Mud Flaps
GMC
Years
Model
Notes
2007-2013
Sierra 1500
Crew Cab
2014-2018
Sierra 1500
Crew Cab, w/o Mud Flaps
2007
Sierra 2500 HD
Crew Cab
2008-2014
Sierra 2500 HD
Crew Cab, Gas engine only
2015-2019
Sierra 2500 HD
Crew Cab, Gas engine only, w/o Mud Flaps
2007
Sierra 3500 HD
Crew Cab
2008-2014
Sierra 3500 HD
Crew Cab, Gas engine only
2015-2019
Sierra 3500 HD
Crew Cab, Gas engine only, w/o Mud Flaps
Fit guidance: Fits the 2007-2019 Chevrolet Silverado / GMC Sierra 2500 HD / 3500 HD and 2007-2018 Chevrolet Silverado / GMC Sierra 1500, with the cab and equipment notes shown in the table. Not for diesel-engine trucks (2008-2019 Silverado/Sierra 2500 HD/3500 HD) or trucks with mud flaps (2014-2019 Silverado/Sierra 1500/2500 HD/3500 HD).
Mounting: Rocker panel, Dominator Xtreme mount kit
Warranty: Limited lifetime structural, 5 years on finish
Mount Location: Mounts to Rocker Panel
Finish: Textured Black
Part number: D224052T
Installation
Type: Bolt-on · Mount: rocker panel, Dominator Xtreme mount kit · Drilling: none on most applications; some call for drilling or enlarging holes (the guide for each part number says)
The Go Rhino guides for this part number, linked below, cover the bracket positions, hardware, tools and any drilling this vehicle needs. Fit the brackets, hang the steps on them, then align and tighten.
Warranty. Go Rhino's limited lifetime structural warranty covers manufacturing defects in materials or workmanship for as long as the product lasts, provided it was installed per Go Rhino's instructions. A limited 5-year finish warranty, for the original owner, covers red rust, peeling, flaking and cracking from the date of purchase. Go Rhino may ask for proof of purchase and photos of the defect, repairs or replaces a covered part at its discretion, and needs an RGA number on every warranty return; shipping on a finish claim is the owner's cost.
Shipping. Ships by ground carrier. The steps travel in a long carton, and the steps and the Dominator mounting bracket kit may arrive as separate boxes.
Inspect on delivery. Open every carton when it arrives and check both steps, the bracket kit and the hardware against the parts list in the Go Rhino guide before you start. Note any visible carton damage on the delivery receipt and photograph it, because damage reported later is much harder to claim.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Go Rhino
Go Rhino makes exterior accessories for pickups, Jeeps and SUVs. Along the sides of the vehicle the range covers running boards in the RB10, RB20 and RB30 lines and their Slim versions, VoltStep electric running boards (power boards), nerf bars and side steps such as the 1000 Series, 4000 Series and O.E. Xtreme, V-Series V3 steps, and the Dominator steps, drop steps and DSS sliders, along with frame-mounted rock sliders. At the front, Go Rhino builds the Charger RC2 and RC4 LR bull bars, the 3000 Series grille guard and 3100 Series StepGuard, and front bumpers including the BR11, Element, Trailline and Rockline.
Further back come rear bumpers such as the BR20.5 and Trailline, sport bars and bed bars, stake pocket bed rails, XRS bed racks and cross bars, and the CEROS roof rack, plus light mounts for the hood, windshield and cowl, jack mounts and a spare tire relocation kit for Jeeps. Many Go Rhino products carry a limited lifetime structural warranty together with a 5-year finish warranty; other lines are covered for 5 years on black finishes and for the life of the product on polished stainless, and the frame-mounted sliders carry a 1-year warranty. Go Rhino is based in Brea, California.
A lower first step
Dominator Xtreme D2 side steps drop a welded hoop step below each door, so the first step into a lifted vehicle or tall SUV is closer to the ground. The one-piece main bar keeps a clean, OE-style line along the cab.
Hex-Tread pads you can paint
Each hoop holds a 4" wide galvanized steel pad with hex-stamped tread for footing in mud and rain. The pads are removable, so they can be painted to match the vehicle.
Two layers against rust
The steel is zinc plated and then finished in a textured black powder coat. A Dominator Xtreme mount kit bolts the steps to the rocker panel.
Frequently Asked Questions
Straight answers on specs, fit and support
How do I find the right part number?
Each listing is made for specific vehicles and cabs, and the fit table lists them with any exclusions, such as diesel-engine versions of certain vehicles. Match your vehicle, cab and any noted equipment before ordering.
What is a drop step?
The D2 has hoops welded to the main bar that drop down below the doors. The step pad sits in the hoop, lower than the bar, which makes the first step into a tall vehicle easier.
Can I paint the step pads?
Yes. The 4" galvanized steel pads are removable and Go Rhino describes them as paintable, so you can color-match or contrast them.
Do I have to drill?
Most applications bolt to factory holes in the rocker panel. Some vehicles need small holes drilled or enlarged, and the guide for your part number shows when.
How do I keep them looking good?
Wash with mild soap and water, dry them afterward and avoid abrasive cleaners or polishing compounds. A non-abrasive wax helps, and re-check the bolts every six months.
What warranty comes with the D2?
A limited lifetime structural warranty plus 5 years on the finish for the original owner. Returns under warranty need an RGA number.
