ICON Vehicle Dynamics 2.5 Series Coilover Kit for 2007-2019 Chevrolet Silverado 1500/Silverado 1500 LD & GMC Sierra 1500/1500 Limited (1-3" Lift)

This ICON V.S. 2.5 Series coilover kit is built for the 2007-2019 Chevrolet Silverado 1500 and Silverado 1500 LD and GMC Sierra 1500 and Sierra 1500 Limited, with vehicle-specific valving and ride height you set by adjusting spring preload. The coilovers are fully serviceable, so they can be rebuilt or revalved if your tires, accessories or driving change. This listing covers 2.5 Series coilover part numbers 71505.

What's Included:

• The ICON 2.5 Series coilover assemblies for the position shown, each with its ICON coil spring fitted
• The reservoirs, mounts and hardware listed for your part in the Kit contents table

Some applications need other parts, such as ICON upper control arms above a set lift height, a differential drop, longer CV axles, or an IIC module for CDEV coilovers. Those are sold separately and listed in the notes for your vehicle. Wheels and tires shown in photos are not included.

Features

Height You Can Adjust
A threaded spring perch lets the ride height be set within the range ICON lists for the vehicle, so you can level the stance or make room for larger tires. ICON sets each coilover at its recommended height before it ships.

A Larger 2.5" Shock Body
The 2.5" body and its larger piston area than stock components improve damping and ride quality on everything from pavement to washboard and rock.

Valved for the Vehicle
ICON tunes the shock length and valving for each application, giving a sport-tuned feel on the road with the control to handle rough ground off road.

ICON Engineered Springs
Each assembly carries a coil spring engineered by ICON for the vehicle, with firmer 700 lb/in or heavy-rate springs on many applications for vehicles that carry extra weight.

Reservoirs and Adjusters
Remote reservoir versions keep operating temperatures lower during extended off-road use, and CDCV, CDXS or CDEV valves add compression adjustment on the applications that offer them.

Built to Be Rebuilt
The coilovers are fully rebuildable and re-tunable, so the same assemblies can be serviced or revalved over a long working life.

Fitment & Compatibility

Specifications

• Brand: ICON Vehicle Dynamics
• Series: 2.5 Series
• Type: Height-adjustable coilover with ICON coil spring
• Service: Fully rebuildable and re-tunable
• Warranty: 1 year on the shock (ICON shock absorber warranty)
• Lift: 1-3"
• Color: Black
• Recommended wheel: 17x8.5" with 4.75" Backspace / 0mm Offset
• Lift, front: 1-3"
• Max tire size: 33" x 11.50"
• Reservoir: Internal Reservoir
• Shock series: 2.5 Series
• Shock body diameter: 2.5"
• Recommended tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)
• Part number: 71505

Fit and install notes

• Requires Aftermarket Front Upper Control Arms or Removal of Factory Droop Stop
• Installation of ICON Delta Joint upper control arms recommended. Shock length requires trimming of factory droop stop to retain stock upper control arms.

Installation

Type: Coilover assembly replacement  ·  Install: Professional installer recommended by ICON  ·  Afterward: Wheel alignment after front coilovers; retorque the hardware after the first 100 miles

The ICON guide for this vehicle lists the tools, the maximum preload and any parts required at higher lift heights. After front coilovers go in, have the vehicle aligned, and retorque all hardware after the first 100 miles.

ICON guide for part 71505:
Tools named in the guide: Jack, Jack stands, Torque wrench, 9/16" socket/wrench, 15mm socket/wrench and 18mm socket/wrench
Modification: the guide includes cutting, drilling or grinding steps; read them before you start
Afterward: the guide calls for a wheel alignment
Torque: the guide gives a torque value for each fastener it installs

Resources

• Official ICON installation guide for part 71505 (PDF): the ICON Vehicle Dynamics step-by-step guide.

Warranty, Shipping & Returns

Warranty. ICON warrants its shock absorbers, including the shock in each coilover, for 1 year against manufacturer's defects. A shock that fails in its first year of ownership must be shipped to ICON Vehicle Dynamics for inspection and service, and if ICON finds the failure came from neglect, improper installation or anything other than normal wear and tear, the owner pays the service costs, including labor, parts and shipping. Coverage is for the original retail purchaser who owns the vehicle the part was first installed on, and ICON repairs or replaces a defective part at its discretion. Finish, alterations, installation contrary to ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada are not covered, and neither are removal, installation or freight costs. The shocks leave ICON charged with nitrogen: releasing that pressure can make a shock malfunction, and a failure caused by low nitrogen pressure is not covered. Shipping. The carrier and ship method are set by the size and weight of the cartons when the order is placed. Larger orders can arrive in more than one carton. Inspect on delivery. Open every carton when it arrives and check each shock, reservoir and hardware bag against the parts list in the ICON guide before you start. Note any visible carton damage on the delivery receipt and photograph it, because damage reported later is much harder to claim. ICON notes that some finish damage can happen in shipping and is not covered by its warranty.

Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.

About ICON Vehicle Dynamics