ICON Vehicle Dynamics 3.0 Series coilovers are the front coilovers ICON builds for drivers who take their vehicles into rougher terrain than its 2.5 Series is aimed at. The 3" body has 50% more piston area in the ride zone than a 2.5 Series shock, a remote reservoir adds oil volume and cooling, and a multi-stage hydraulic Bump Zone firms up the last 40% of compression travel. Each coilover is tuned for its vehicle and uses ICON's CDCV, CDXS or CDEV compression adjustment, depending on the part.
What's Included:
- ICON 3.0 Series remote reservoir front coilover assembly, as a pair or a single side as the listing states
- Any other parts listed for this vehicle in the Kit contents table
Parts named under Also required, such as upper control arms, sway bar or differential drop brackets, track bars or an IIC kit, are sold separately, as are wheels, tires and accessories seen in photos.
Features
3" Body, More Piston Area
The 3" body has 50% more piston area in the ride zone than a 2.5 Series shock, which steadies the vehicle in the roughest off-road driving and shows on the road too.
Remote Reservoir on Every Coilover
A remote reservoir adds oil and nitrogen volume and surface area for cooling, so damping stays consistent as the shock heats up.
Adjustable Compression Damping
Depending on the part, compression is tuned with a CDCV adjuster, a CDXS dual-speed valve or a CDEV valve run by ICON Intelligent Control.
Hydraulic Bump Zone
A multi-stage hydraulic Bump Zone increases bottom-out resistance through the last 40% of compression travel, keeping hard hits under control.
Tuned for the Vehicle
Each coilover is valved and sprung for the vehicle it fits, with lengths and mounts designed for that platform's front suspension.
Built to Be Fully Rebuildable
ICON's 3.0 Series shocks are fully serviceable, so they can be rebuilt or re-tuned rather than replaced.
Fitment & Compatibility
Fit guidance: ICON Vehicle Dynamics builds each 3.0 Series Coilover for specific vehicles. Choose your vehicle to see its part numbers, options and fit notes.
Specifications
-
Brand: ICON Vehicle Dynamics
-
Series: 3.0 Series
-
Shock series: 3.0 Series
-
Body diameter: 3"
-
Reservoir: Remote
-
Position: Front
-
Installation: Professional install recommended by ICON
Installation
Type: Front coilover assembly · Install: Professional shop recommended · Afterward: Professional alignment, plus ADAS recalibration on late-model vehicles
ICON recommends that a professional shop or service technician install its coilovers. The factory front shock or coil assembly comes out and the 3.0 Series coilover goes into the factory location, with its remote reservoir mounted on the bracket supplied. Some vehicles need extra parts, such as upper control arms or a sway bar bracket, and some need cutting or drilling, as the fitment notes and instructions show. A professional alignment follows.
Warranty, Shipping & Returns
Warranty. ICON shock absorbers, coilovers included, carry a 1-year warranty against manufacturer's defects. A shock that fails in its first year goes back to ICON for inspection and service, and if ICON finds the failure came from neglect, improper installation or anything other than normal wear, the owner pays the service costs. Coverage is for the original retail purchaser who owns the vehicle the parts were first installed on, and ICON repairs or replaces a defective part at its discretion. Finish, parts worn through normal use, modifications, installation contrary to ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the US and Canada are excluded. Removal, installation and freight costs are not covered. Any fabricated ICON brackets supplied with the coilovers fall under ICON's limited lifetime warranty. Shipping. The carrier and ship method are set by the size and weight of the cartons when the order is placed. Inspect on delivery. Open every carton when it arrives and check each part and hardware bag against the parts list before the install starts. Note any visible carton damage on the delivery receipt and photograph it, because damage reported later is much harder to claim.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About ICON Vehicle Dynamics
ICON Vehicle Dynamics designs and builds performance suspension for vehicles and SUVs in Riverside, California, and has been developing its systems since 2008. Engineering is led by head engineer and SCORE champion driver Dylan Evans, and the laser cutting, metal forming, CNC machining, welding and assembly are all done in house.
ICON's engineers start from the result they want a vehicle to have, study the forces acting on it in motion, and then develop and test parts both in everyday driving and in race conditions. The 3.0 Series sits above ICON's 2.5 Series for owners who want more damping capacity, and it shares ICON's CDCV, CDXS and CDEV valve technology.