ICON Vehicle Dynamics Adjustable Upper Link Kit for 2007-2018 Jeep Wrangler (Front)
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
Features
- Length Set on the Vehicle: Link length can be tuned on the vehicle, through ICON's double adjuster or threaded rod ends, without removing the link.
- Billet or DOM Tube Build: ICON builds these links from CNC-machined 6061 aluminum billet or from DOM steel tube; the title and specs name the build of this kit.
- FK Rod Ends and Bearings: PTFE-lined FK rod ends and spherical bearings take the place of soft factory bushings, cutting deflection and the bind that limits stock suspension travel.
- Anodized or Powder-Coated Finish: Billet parts are anodized against corrosion and tubular parts carry a multi-stage powder coat, so the links hold up to road salt and trail grime.
- Geometry Matched to Lift: Links are sized for lifted vehicles, helping restore suspension geometry once the ride height changes.
- Quiet Greaseless Bushings: Where a bushing is used, ICON fits multi durometer or dual-durometer high-angle bushings that run quietly and need no periodic greasing.
Description & Fitment
ICON designed this front adjustable upper link kit around the 2007-2018 Jeep Wrangler. The links are 1026 DOM steel tube, CNC machined and welded in ICON's own shop. PTFE-lined FK rod ends allow more articulation, reduce deflection and let you set the link length.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2007-2018 | Wrangler | — |
Check your fit: match your year, model and the notes in each row: 2007-2018 Jeep Wrangler.
Not for: years, models or trims outside those rows. Other link kits in this line for the same models: 21031 (Fixed Lower Link Kit, front, 2007-2018); 21041 (Adjustable Lower Link Kit, rear, 2007-2018); 21046 (Fixed Upper Link Kit, rear, 2007-2018); 22021 (Fixed Lower Link Kit, front, 2018-2023); 22022 (Adjustable Upper Link Kit, front, 2018-2023); 22023 (Adjustable Lower Link Kit, rear, 2018-2023).
About ICON Vehicle Dynamics
ICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.
ICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.
Authorized ICON Vehicle Dynamics dealer. Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.
Frequently Asked Questions
Will this fit my 2007-2018 Jeep Wrangler?
It fits when your vehicle matches one of these rows: 2007-2018 Jeep Wrangler. If you are unsure about your trim or drivetrain, send us your VIN and we will check it against ICON's application list before you order.
Where are the install instructions?
Yes. ICON's install sheet for 21036 is linked in the Installation section below, with its steps condensed on this page. Use the sheet for the torque values.
Billet or tubular: which should I pick?
Both replace the factory links. Billet links are machined aluminum with an anodized finish; tubular links are DOM steel with a powder coat and a high-clearance shape. ICON offers both on several platforms, so choose the build you prefer.
Do adjustable links need setting up?
Yes. Adjustable links are set to length during the install, using ICON's measurements for your vehicle. A shop can do this when it aligns the vehicle.
Do the rod ends need greasing?
ICON uses PTFE-lined FK rod ends and greaseless multi durometer bushings on most kits. The Ram 2500/3500 tubular links are the exception: ICON says their dual stage bushings can be greased.
What warranty applies?
ICON's published limited warranty applies to its link kits, for the original buyer and the vehicle they were first installed on. Contact us first for a claim and we will open it with ICON.
Installation
- Tape Measure
- Torque Wrench
- 10mm Socket / Wrench
- 18mm SOCKET / WRENCH
Here's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values.
- Using a 10mm, remove heat shield from frame.
- Remove stock upper link from driver side of vehicle using (2) 18mm.
- Assemble the upper links. Use anti seize on threads of rod end. Thread jam nut onto rod end, then thread rod end onto link. Adjust the length of the link to be 1/8" longer than the stock link.
- Mount the heat shield using a 10mm.
- Removing the passenger side upper link bolt can be very difficult due to bolt clearances with the exhaust (07-11 models). It can be removed by disconnecting the exhaust and moving it enough to remove the bolt.
- Check pinion angle and caster, adjust link length as needed. BEGIN INSTALLATION
Stuck on a step?
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part Number | 21036 |
| Position | Front |
| Lift | Per part, as ICON lists it |
| UPC | 840103400464 |
Warranty, shipping & returns
-
Warranty
ICON's published limited warranty applies to this part, and we handle any claim with ICON for you.- Coverage belongs to the original retail buyer who owns the vehicle the part was first installed on.
- ICON parts must go on as the complete kit shown in ICON's application guide. Swapping out or leaving off a required part voids the warranty.
- ICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.
- Not covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.
- To claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
Check every link, rod end, bushing and the hardware bag as soon as the carton arrives, and photograph any damage before installation. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.