ICON Vehicle Dynamics ICON Box Kits, Block Kits, Air-Ride & Brake-Line Kits: clean product photo on white

ICON Vehicle Dynamics Brake Line Kit for 1991-1997 Toyota Land Cruiser (3" Lift)

$213.59
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear
  • Guaranteed FitmentTeam-confirmed fit or money back
  • No Sales TaxZero sales tax on every order
  • 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

+1 (470) 823-2453 Email Us

Features

  • Sized for a Lift Range: ICON lists each brake line kit for a lift range; this one is for its 3" Land Cruiser lift.
  • Reach at Full Droop: Matched to the lift, the lines reach at full droop without being stretched.
  • Made for the Land Cruiser: Sized for the 1991-1997 Toyota Land Cruiser.
  • Matched to ICON Lift Systems: Each part is listed for a specific ICON lift height and platform, so the pieces fit with the rest of the ICON system on the truck.
  • Ask Before You Order: ICON publishes little beyond the fitment for this kit, so contact us with any questions before ordering.
  • ICON Limited Warranty: ICON's published limited warranty covers the original buyer on the vehicle the part was first installed on. Contact us first and we open the claim with ICON.

Description & Fitment

Here is ICON's brake line kit sized for the 1991-1997 Toyota Land Cruiser. ICON sells this brake line kit for its 3" lift on the Land Cruiser. It belongs to ICON's 3" lift setup.

Fitment & Compatibility

Toyota
Years Model Bed Notes
1991-1997 Land Cruiser 3" lift

Check your fit: match your year, model and the notes in each row: 1991-1997 Toyota Land Cruiser (3" lift).

Not for: years, models or trims outside those rows. This is the only lift kit component in this ICON line for this model.

About ICON Vehicle Dynamics

ICON.

ICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.

ICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.

Authorized ICON Vehicle Dynamics dealer. Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.

Frequently Asked Questions

Will this fit my 1991-1997 Toyota Land Cruiser?

It fits when your vehicle matches one of these rows: 1991-1997 Toyota Land Cruiser (3" lift). If you are unsure about your trim or drivetrain, send us your VIN and we will check it against ICON's application list before you order.

Does ICON publish install steps for it?

Yes. ICON's install sheet for 53009 is linked in the Installation section below, with its steps condensed on this page. Use the sheet for the torque values.

What is an ICON box kit?

It is the set of brackets, spacers and smaller parts an ICON lift system needs alongside its shocks and springs. Each box kit is built for one platform and lift height, named in its title.

Do I need a box kit if I bought a full ICON system?

Complete ICON systems normally include their box kits. These listings are for owners building a system from parts or replacing a box kit, so check the title against your lift height.

Are the brake lines needed on a smaller lift?

ICON lists each brake line kit for a lift range. Pick the one that matches your lift so the lines reach at full droop without being stretched.

What warranty applies?

ICON's published limited warranty applies to these parts, for the original buyer and the vehicle they were first installed on. Contact us first for a claim and we will open it with ICON.

Installation

Recommended installationProfessional
TypeBox kit, block kit, brake line kit or leveling collar for an ICON lift
Tools
  • 10mm Flare Nut Wrench
  • 17mm Socket / Wrench
  • 19mm Socket / Wrench
What's involvedThe factory brake lines are replaced with ICON lines sized for a 3" lift, using flare nut wrenches and new retaining clips at the mountsthe brakes are then bled, the reservoir refilled, and fittings re-torqued after 100 miles.

Here's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values.

  1. Ensure truck is in gear or in park, set parking brake, turn off engine and chock rear tires!
  2. REAR AND FRONT LEFT PROCEDURE: When loosening the upper brake line fitting, it is important to use the correct flare nut wrench to prevent rounding of the nut AND a wrench on the other side of the junction to prevent the line from twisting and damaging the hard line.
  3. Loosen upper compression fitting. Remove the retaining clip from the upper mount, the line can now spin allowing you to disconnect it from the lower fitting.
  4. Install the new line on the axle end first. Route the line through the upper mount bracket and tighten the flare nut. Install the new retaining clip.
  5. FRONT RIGHT PROCEDURE: This line is the same on both ends. Loosen both compression fittings. Remove both retaining clips from the mounts. Replace with the new line and reassemble.
  6. Bleed the brakes per the factory service manual, checking the reservoir often to prevent air from being introduced at the top. Refill the reservoir to the height noted in step 2.

Stuck on a step? Ask our install experts

Specifications

BrandICON Vehicle Dynamics
Part Number53009
Lift3"
UPC840103402819

Warranty, shipping & returns

  • Warranty

    ICON's published limited warranty applies to this part, and we handle any claim with ICON for you.
    • Coverage belongs to the original retail buyer who owns the vehicle the part was first installed on.
    • ICON parts must go on as the complete kit shown in ICON's application guide. Swapping out or leaving off a required part voids the warranty.
    • ICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.
    • Not covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.
    • To claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.

  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Order by 5 PM ET on a business day and it starts processing the same day.
    • Most orders arrive within 1-5 business days.
    • We email your tracking number as soon as it ships.

  • Inspect on delivery

    Open the box kit or block kit as soon as it arrives, check every bracket, block, line and hardware bag against ICON's parts list, and photograph any damage before installation. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.

  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.
Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question