ICON Vehicle Dynamics Multi Rate Coil Spring Kit for 2020-2022 Jeep Gladiator (Rear, 1.5" Lift)
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
Features
- Rate Chosen per Vehicle: ICON picks the spring rate for each vehicle and lift height, using dual rate, triple rate or performance designs depending on the part.
- Lift and Ground Clearance: Taller springs raise the ride height by the amount ICON lists for each part, adding ground clearance and room for larger tires.
- Built for One Position: Each kit is made for the front or rear of its vehicle, as named in the title.
- Progressive Spring Designs: Dual and triple rate springs start soft for small bumps and firm up deeper in the travel, so ride quality holds up as the load changes.
- ICON Warranty, Claims Through Us: ICON's published limited warranty covers these springs for the original buyer, and we open any claim with ICON for you.
- Part of ICON's Systems: These springs come from the same development work as ICON's Stage suspension systems, so they pair with ICON shocks and lift parts.
Description & Fitment
Here is ICON's rear multi rate coil spring kit sized for the 2020-2022 Jeep Gladiator. It is a multi rate rear spring, soft early in its travel and firmer as it compresses. It belongs to ICON's 1.5" lift setup. The added height helps on trails and makes space for a larger tire.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2020-2022 | Gladiator | 1.5" lift |
Check your fit: match your year, model and the notes in each row: 2020-2022 Jeep Gladiator (1.5" lift).
Not for: years, models or trims outside those rows. Other coil spring kits in this line for the same model: 22025 (Dual Rate Coil Spring Kit, front, 2" lift, 2018-2023).
About ICON Vehicle Dynamics
ICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.
ICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.
Authorized ICON Vehicle Dynamics dealer. Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.
Frequently Asked Questions
Will this fit my 2020-2022 Jeep Gladiator?
It fits when your vehicle matches one of these rows: 2020-2022 Jeep Gladiator (1.5" lift). If you are unsure about your trim or drivetrain, send us your VIN and we will check it against ICON's application list before you order.
Does ICON publish install steps for it?
Yes. ICON's install sheet for 22066 is linked in the Installation section below, with its steps condensed on this page. Use the sheet for the torque values.
Dual rate or triple rate: what is the difference?
Both start soft and firm up as the spring compresses. A triple rate spring adds a third stage, so the change in feel is more gradual. ICON chooses the design for each vehicle, and the part title names it.
Do I need new shocks with these springs?
ICON designs these springs as part of its suspension systems. Check the fitment notes for your part, and match the shocks to the lift height you choose.
Will I need an alignment?
Lifting the front of a vehicle changes its alignment, and ICON calls for an alignment after many of its front spring installs. The Installation section of each part shows what ICON asks for.
What warranty applies?
ICON's published limited warranty applies to its coil springs, for the original buyer and the vehicle they were first installed on. Contact us first for a claim and we will open it with ICON.
Installation
- Jack
- Jack Stands
- Torque Wrench
- 10mm Socket / Wrench
- 18mm Socket / Wrench
- 21mm Socket / Wrench
Here's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values.
- Place the vehicle on a flat surface, verify that the transmission is shifted into PARK, firmly apply the emergency brake, and place wheel chocks on both sides of the tires.
- Using a properly rated jack, raise the back of the vehicle and support the frame rails with jack stands. Ensure the jack stands are secure and set properly before lowering the jack. NEVER WORK UNDER AN UNSUPPORTED VEHICLE.
- Disconnect the rear sway bar from the frame using an 18mm.
- Install the multi-rate coil spring. Ensure the upper coil isolator is located properly on the coil and the locator nipple is in the locating hole in the frame.
- Lift the differential enough to connect the shock. Connect the shocks using the factory bolt and a 21mm. [Torque to factory spec]
- With the vehicle on the ground, connect the rear track bar using factory hardware and a 21mm. [Torque to factory spec]
Stuck on a step?
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part Number | 22066 |
| Product Type | Coil spring kit |
| Position | Rear |
| Lift | 1.5" |
| UPC | 840103408644 |
Warranty, shipping & returns
-
Warranty
ICON's published limited warranty applies to this part, and we handle any claim with ICON for you.- Coverage belongs to the original retail buyer who owns the vehicle the part was first installed on.
- ICON parts must go on as the complete kit shown in ICON's application guide. Swapping out or leaving off a required part voids the warranty.
- ICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.
- Not covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.
- To claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
Check each spring, its coating and any isolators or cams in the box as soon as the carton arrives, and photograph any damage before installation. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.