ICON Vehicle Dynamics Sway Bar Link Kit for 2018-2023 Jeep Gladiator/Wrangler (Front)
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
Features
- Restores Sway Bar Angle: The links keep the sway bar at a working angle and free of bind once the vehicle is lifted.
- Billet Aluminum Build: These links are built from billet aluminum.
- FK Rod End Bearings: FK rod end bearings remove the flex of stock bushings.
- Length Set on the Vehicle: The link length can be tuned without pulling the links.
- Matched to ICON Lift: Each kit belongs to an ICON lift setup, with the lift range listed in the specs.
- ICON Warranty, Claims Through Us: ICON's published limited warranty covers its link kits for the original buyer, and we open any claim with ICON for you.
Description & Fitment
This ICON front sway bar link kit fits the Jeep Wrangler JL and Gladiator JT as part of ICON's 2-3" lift setup. It suits owners of lifted Jeeps who need to bring the front sway bar back to a proper angle. The billet aluminum links use FK rod end bearings to remove stock bushing flex. Link length can be set on the vehicle without pulling the links.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2020-2023 | Gladiator | 2-3" lift | |
| 2018-2023 | Wrangler | 2-3" lift |
Check your fit: match your year, model and the notes in each row: 2020-2023 Jeep Gladiator (2-3" lift); 2018-2023 Jeep Wrangler (2-3" lift).
Not for: years, models or trims outside those rows. Other link kits in this line for the same models: 21031 (Fixed Lower Link Kit, front, 2007-2018); 21036 (Adjustable Upper Link Kit, front, 2007-2018); 21041 (Adjustable Lower Link Kit, rear, 2007-2018); 21046 (Fixed Upper Link Kit, rear, 2007-2018); 22021 (Fixed Lower Link Kit, front, 2018-2023); 22022 (Adjustable Upper Link Kit, front, 2018-2023).
About ICON Vehicle Dynamics
ICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.
ICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.
Authorized ICON Vehicle Dynamics dealer. Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.
Frequently Asked Questions
Will this fit my 2020-2023 Jeep Gladiator?
It fits when your vehicle matches one of these rows: 2020-2023 Jeep Gladiator (2-3" lift); 2018-2023 Jeep Wrangler (2-3" lift). If you are unsure about your trim or drivetrain, send us your VIN and we will check it against ICON's application list before you order.
Will I have to cut or drill anything?
Yes, ICON's install sheet for 22061 includes drilling, cutting or trimming. Read the sheet in the Installation section below before you start, or have a shop do the work.
Billet or tubular: which should I pick?
Both replace the factory links. Billet links are machined aluminum with an anodized finish; tubular links are DOM steel with a powder coat and a high-clearance shape. ICON offers both on several platforms, so choose the build you prefer.
Do adjustable links need setting up?
Yes. Adjustable links are set to length during the install, using ICON's measurements for your vehicle. A shop can do this when it aligns the vehicle.
Do the rod ends need greasing?
ICON uses PTFE-lined FK rod ends and greaseless multi durometer bushings on most kits. The Ram 2500/3500 tubular links are the exception: ICON says their dual stage bushings can be greased.
What warranty applies?
ICON's published limited warranty applies to its link kits, for the original buyer and the vehicle they were first installed on. Contact us first for a claim and we will open it with ICON.
Installation
- Drill
- 1/2" Drill Bit
- Torque Wrench
- 5/8" Socket / Wrench
- 3/4" Socket / Wrench
- 18mm Socket / Wrench
Here's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values.
- Using a properly rated jack, raise the front of the vehicle and support the frame rails with jack stands. Ensure the jack stands are secure and set properly before lowering the jack. NEVER WORK UNDER AN UNSUPPORTED VEHICLE.
- Remove the factory sway bar links using an 18mm.
- Using a 1/2" drill bit, carefully drill out the sway bar hole.
- The sway bar links come preassembled by ICON, verify that the studs are in the proper orientation before mounting.
- Mount the sway bar link with the open eyelet on the passenger side using the supplied spacers with the factory bolt and an 18mm socket/wrench. [Torque to factory spec] Mount the stud of the rod end to the sway bar using 1/2" washers on both sides with a 5/8" and 3/4" socket/wrench. [Torque nut to 50 ft-lbs]
- Keep rod ends parallel and tighten jam nuts using a 3/4" wrench.
Stuck on a step?
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part Number | 22061 |
| Position | Front |
| Lift | 2-3" |
| UPC | 840103401485 |
Warranty, shipping & returns
-
Warranty
ICON's published limited warranty applies to this part, and we handle any claim with ICON for you.- Coverage belongs to the original retail buyer who owns the vehicle the part was first installed on.
- ICON parts must go on as the complete kit shown in ICON's application guide. Swapping out or leaving off a required part voids the warranty.
- ICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.
- Not covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.
- To claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
Check every link, rod end, bushing and the hardware bag as soon as the carton arrives, and photograph any damage before installation. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.