The N-Fab Nerf Step RS is a low-profile hoop step: a 2" mild steel primary tube hugs the rocker panel and drops a 4.75" step plate with a raised, dimpled surface at each door, finished in textured black powder coat. Built for the 2019-2026 Ram 1500 crew cab, the RS gives a lower step in without hanging a bulky bar off the rocker panel. This listing is N-Fab part number 219418012, finished in textured black.
What's Included:
- 2x Nerf Step RS bars (driver and passenger side)
- Vehicle-specific mounting hardware kit
Features
Slim 2" Primary Tube
The 2" main tube sits tight against the rocker panel, keeping the bar close to the body so it costs little ground clearance.
4.75" Drop Step Plates
Each drop plate is 4.75" wide, giving more of the foot a place to land than a narrow hoop and a lower first step into the vehicle.
Raised, Dimpled Surface
The step plates carry an aggressive raised dimple pattern that helps a sole bite through mud, slush and rain.
Rated 300 lb Per Step
N-Fab rates the Nerf Step RS at up to 300 lb per step and 600 lb per side.
All-Steel, Textured Black
The bar is mild steel throughout, finished in textured black powder coat with a 5-year finish warranty.
Mostly Bolt-On
Most applications bolt to factory mounting points with the supplied hardware; where a vehicle needs a hole drilled, the Installation tab of that listing says so and names the step.
Sold as a Pair
Every order is a driver-side and a passenger-side bar with the mounting hardware for that application.
Fitment & Compatibility
Ram
| Years |
Model |
Bed |
Notes |
| 2019-2026 |
1500 |
5'7" |
Crew Cab |
| 2019-2026 |
1500 |
6'4" |
Crew Cab |
Fit guidance: Fits the 2019-2026 Ram 1500 crew cab. Not for the Ram 1500 Classic (previous body, sold 2019-2024). Match your cab before ordering: each bar is built for one body style.
Specifications
-
Series: N-Fab Nerf Step RS
-
Step material: Mild steel
-
Main tube: 2"
-
Step width: 4.75"
-
Step type: Hoop step with drop step plates
-
Step surface: Raised, dimpled non-slip
-
Load rating: Up to 300 lb per step, 600 lb per side
-
Mounting: Rocker panel
-
Sold as: Pair (driver and passenger)
-
Part number: 219418012
-
Finish: Textured Black
-
Warranty: Lifetime structural + 5-year powder-coat finish
Installation
Type: Bolt-on, no drilling · Tools: Common hand tools: sockets, wrenches and a ratchet, plus a torque wrench where the guide lists a torque value · Difficulty: Moderate DIY
Mind the bracket orientation shown in your guide, start every fastener by hand, and set each bar parallel to the rocker before tightening to the listed values. Recheck every fastener after the first few weeks of driving and again at routine service, because a bar that is never rechecked can settle. The installation guide for this application uses the factory mounting points and does not call for drilling. The guide specifies fastener torque of 20 ft-lb and 20-25 ft-lb.
Resources
Warranty, Shipping & Returns
Warranty. N-Fab covers the structure for life against failures in materials and workmanship, including the welds, the brackets and the material of the bar itself. The powder-coat finish carries a 5-year limited finish warranty. Both terms belong to the original purchaser and apply on the vehicle the bars were first installed on.
Free shipping. This part ships by ground carrier as an oversize parcel, in a long carton rather than on a pallet.
Inspect on delivery. A long carton takes knocks in transit, so look it over while the driver is there and note any crushed ends or punctures on the delivery record. Unpack it the same day and check the parts list: a bent bracket or a short hardware bag reported in the first days is a quick replacement.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. N-Fab charges a 20% restocking fee on any product returned without a defect, and an N-Fab representative has to confirm a defect in fit, form or function before a return is authorized, so please contact us before shipping a part back. An item sent back without that authorization is refused and returned at the buyer's expense. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About N-Fab
N-Fab designs and fabricates tubular accessories for trucks and SUVs: nerf steps, running boards, rock rails and sliders, pre-runner bumpers and light mounts, most of them cut and bracketed for one specific vehicle. Every N-Fab product is warranted for life against defects in its materials and workmanship, and powder-coated finishes carry a 5-year limited finish warranty, both extended to the original purchaser on the vehicle the part was first installed on.
The Nerf Step RS sits beside the original cab length Nerf Step as its lower-profile version: a slimmer 2" tube with a wider 4.75" step plate. EpYx trades the plate for a long slotted pad, Podium moves to stainless steel, and Predator Pro to extruded aluminum. For full-length rocker coverage, N-Fab builds the Nerf Step Wheel to Wheel.
Most of the N-Fab range is formed and welded tube: mild steel across the Nerf Step, EpYx, Roan and RKR lines, stainless steel in the Podium series, and extruded aluminum in Predator Pro and the Growler steps. Steel and aluminum parts are finished in gloss or textured black powder coat, and many bars are welded as one piece so there are fewer joints along the length to work loose.
