Pace Edwards Full Metal JackRabbit Manual Retractable Tonneau Cover for 2020-2026 Chevrolet Silverado 2500/3500 / GMC Sierra 2500/3500 (6'9" Bed, Cover with Standard Rails)

$2,138.72
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear

Free gifts included with your order

Details for ACCESS TrailSeal Tailgate Seal Gasket, 8.5 ft (30946) (opens in a new tab)
Details for ACCESS EZ-Retriever II Truck Bed Cargo Reach Tool, 5 ft (70950) (opens in a new tab)
Details for Tonneau Cover Install & Care Guide, 2026 Edition (eBook) (opens in a new tab)
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

See it on a truck

All aluminum, nearly flush

The Full Metal JackRabbit builds its deck from double-walled aluminum slats under a textured semi-gloss black powder coat, then sets it nearly flush with the bed rails. A key-lockable twist lock holds it closed, and paired with a locking tailgate it shuts the bed off from the outside.

Twist, push and it retracts

Turn the twist lock and Pace Edwards' heavy-duty Continuous Tension Spring carries the deck forward into a contoured, low-profile canister. The integrated strap draws it back toward the tailgate, and letting go engages the nearest lock position.

All aluminum, nearly flush

The Full Metal JackRabbit builds its deck from double-walled aluminum slats under a textured semi-gloss black powder coat, then sets it nearly flush with the bed rails. A key-lockable twist lock holds it closed, and paired with a locking tailgate it shuts the bed off from the outside.

Twist, push and it retracts

Turn the twist lock and Pace Edwards' heavy-duty Continuous Tension Spring carries the deck forward into a contoured, low-profile canister. The integrated strap draws it back toward the tailgate, and letting go engages the nearest lock position.

Frequently Asked Questions

Straight answers on specs, fit and support

Do I have to drill into my truck to install it?

Most applications install without drilling. Each cover ships with a mounting kit made for its truck and a speed clamp system that holds the rails to the bed. The drain tubes use the factory drain holes; a truck without them needs 3/4" holes drilled.

Will it keep rain and snow out of the bed?

It keeps most moisture out, but it is weather resistant rather than waterproof. Water that gets past the deck is funneled to the canister and drains out through a tube at its base. Pace Edwards' warranty excludes water intrusion, so keep anything that must stay dry in a sealed container.

Can I open the tailgate with the cover closed?

Yes. The tailgate works independently of the cover, whether the deck is fully closed, fully open or stopped at one of its lock positions.

Can I leave it partly open for tall cargo?

Yes. Release the deck along the rails and it engages a lock position every 12", so the front of the bed stays covered while a tall load stands in the open rear section.

Will it work with my bedliner?

A drop-in liner that wraps over the bed rails usually has to be trimmed. The rails lay flat on the bed sill and the clamps grip the sill, so the part of the liner covering the sill is trimmed or removed, and a notch may be needed for the canister at the front of the bed. Where Pace Edwards lists a fit note for a truck, such as factory bed storage boxes or a factory rail system, it appears under Fit guidance and in the Notes column of the fitment table on that part's page.

Does the lifetime warranty transfer to a new owner?

No. Pace Edwards' limited lifetime warranty covers the original owner on the original vehicle and is nontransferable. It covers failure of materials and workmanship, including deck panel separation, lock assemblies, and hardware and components.