Pace Edwards designed the SwitchBlade to come off as easily as it goes on, with the canister and cover lifting out as one assembly in minutes. Release the rear latch and its Continuous Tension Spring draws the deck into a low-profile canister at the bulkhead. Part SWFA18A44 matches the 6'9" bed, Ford's "6.75-ft" box at 81.9" measured, on 2017-2020 F-250 and F-350 Super Duty trucks.
What's Included:
- SwitchBlade retractable cover with its removable canister
- Side rails with built-in U-channel gutters
- Clamp system for mounting the rails
Racks and other bed accessories are sold separately.
Features
ArmorTek Over Rigid Aluminum
The deck is made of rigid aluminum top panels laminated with ArmorTek padded vinyl, a weather-resistant overlay bonded to the metal.
Release the Latch, It Retracts
Release the rear latch and Pace Edwards' heavy-duty Continuous Tension Spring takes over, drawing the cover into a low-profile canister mounted at the bulkhead for nearly full access to the bed.
Lifts Out for Full Bed Access
The canister and cover come out as one assembly in minutes, so the whole bed is available for a big load and the cover goes back on afterward.
Built-In Rain Gutters
Recessed U-channels in the side rails work as gutters in heavy rain and send water out of the bed through drainage tubes. The cover is weather resistant, not waterproof.
Pull Strap Closing
A built-in pull strap brings the deck back over the bed from the tailgate end.
Fully Open or Fully Closed
The deck runs smoothly along the rails with no stopping points, so it is used fully open or fully closed rather than locked partway.
Clear View Rearward
The cover allows full rear visibility, and its contoured canister stays low at the front of the bed.
Clamp-On Mounting
The SwitchBlade clamps to the truck with its included clamp system, with no cutting or drilling on most trucks. Only a bed without factory drain holes needs holes drilled, and those are for the drain tubes, not the cover.
Fitment & Compatibility
Ford
| Years |
Model |
Bed |
Notes |
| 2017-2020 |
F-250 Super Duty |
6'9" |
— |
| 2017-2020 |
F-350 Super Duty |
6'9" |
— |
Fit guidance: Part SWFA18A44 fits the 2017-2020 Ford F-250 Super Duty and F-350 Super Duty with the 6'9" bed. Retractable covers are cut for one bed length, so match your bed before ordering.
Specifications
-
Brand: Pace Edwards
-
Series: SwitchBlade
-
Cover type: Manual retractable
-
Deck: Rigid aluminum panels laminated with ArmorTek padded vinyl
-
Finish: Vinyl grain
-
Operation: Continuous Tension Spring, pull strap, no stopping points
-
Canister: Low-profile, bulkhead-mounted, removable
-
Drainage: U-channel rail gutters and drainage tubes
-
Installation: Clamp-on; no cutting or drilling on most trucks, 3/4" drain-tube holes where the bed has no factory drain holes
-
Warranty: 2-year limited
-
Bed length: 6'10" (81.9"), Ford's "6.75-foot" bed
-
Part number: SWFA18A44
Installation
Type: clamp-on, no cutting or drilling on most trucks · Drain tubes: factory drain holes, or 3/4" drilled holes where there are none · Removal: canister and cover lift out as one assembly
This cover clamps onto the truck with its included clamp system, with no cutting or drilling on most trucks. The drain tubes use the factory drain holes or ports at the front of the bed; a truck without them needs 3/4" holes drilled for the tubes. Pace Edwards lists a Phillips head screwdriver and a 7/16" wrench as the tools for mounting and says the job takes under an hour. The same mounting lets the canister and cover come out as one assembly in minutes when the whole bed is needed.
Resources
An installation guide for this part number is not available to download. Our team can answer installation questions before you order; contact us with the part number.
Warranty, Shipping & Returns
Warranty. Pace Edwards backs the SwitchBlade with a two-year limited warranty. It covers ArmorTek deck material delamination, a failed Continuous Tension Spring, and all hardware and components. Not covered: normal wear and tear such as fading or discoloration, water that gets in at any point and the damage it causes, added parts and accessories, and acts of nature. Coverage is void after lubrication other than what the owner or installation manual prescribes, misuse, negligence or accident, improper installation, cargo that is not secured, or an accessory installed without Pace Edwards' written permission that interferes with the cover. Pace Edwards repairs or replaces a defective part at its discretion and does not cover consequential damage to the vehicle or other property. Shipping. The carrier and ship method are set by the size and weight of the carton when the order is placed. Inspect on delivery. Open the carton when it arrives and check the cover, rails and hardware before you start the install. Note any visible carton damage on the delivery receipt and photograph it, because damage reported later is much harder to claim.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Pace Edwards
Pace Edwards has built retractable truck bed covers since 1988, designed around security, straightforward operation and a streamlined look that keeps a pickup looking like a pickup. The SwitchBlade carries a two-year limited warranty.
The SwitchBlade is the Pace Edwards cover built for quick removal: its canister and ArmorTek-over-aluminum deck lift out together, and it travels fully open or closed with no stops. The SwitchBlade Metal uses the same layout with a powder-coated aluminum slat deck, while the JackRabbit and Full Metal JackRabbit add a twist lock and lock positions every 12". Pace Edwards' manual covers are the JackRabbit, Full Metal JackRabbit, SwitchBlade, SwitchBlade Metal, UltraGroove and UltraGroove Metal, and the BedLocker and UltraGroove Electric add powered operation.
Pace Edwards builds its decks on aluminum, laminated with its padded ArmorTek overlay or finished in powder coat, and its manual covers retract on the company's own Continuous Tension Spring. Drain tubes carry water that reaches the canister out of the bed.