Rigid A-Pillar Bracket Kit: two black A-pillar light brackets, angled view on white
Rigid 360-Series 6" Drive A-Pillar Light Kit: front three-quarter view of a dark Toyota Tundra with a round LED light mounted at each A-pillar beside a lake
Rigid 360-Series 4" Drive A-Pillar Light Kit: gray Toyota Tundra with TUNDRA door badge, round A-pillar pods and lit lower bumper lights in the desert

Rigid A-Pillar Bracket Kit for 2022-2026 Toyota Tundra

$172.49
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear
  • Guaranteed FitmentTeam-confirmed fit or money back
  • No Sales TaxZero sales tax on every order
  • 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

+1 (470) 823-2453 Email Us

Features

  • Vehicle-specific fit: The bracket is made for one vehicle's A-pillar or cowl area, so it sits where the body expects it.
  • Stainless steel build: Rigid makes the brackets from stainless steel, which keeps the pods steady over washboard roads.
  • UV-resistant powder coat: A black powder coat that Rigid rates for UV and abrasion resistance keeps the brackets from fading next to the paint.
  • Brackets and hardware included: The brackets and the bolts to fit them come in the box, sized for that vehicle's mounting points.
  • Made for Rigid pods: The bracket is sized for Rigid pods; the Compatible lights row or the summary above names the ones it takes.
  • Lights sold separately: This is a bracket-only kit, so you choose the beam and finish of the pods that go on it.

Description & Fitment

The Rigid A-Pillar Bracket Kit gives Rigid lights a factory-looking home on the A-pillars of the 2022-2026 Toyota Tundra. It is for owners adding SR-Q pods, 4" 360-Series pods, D-Series pods or other Rigid pods, which are sold separately. The kit includes vehicle-specific A-pillar brackets and mounting hardware in stainless steel with a UV-resistant powder coat. The install calls for trimming a cowl end cap.

Fitment & Compatibility

Toyota
Years Model Bed Notes
2022-2026 Tundra β€”

Check your fit: 2022-2026 Toyota Tundra. Takes 4" 360-Series pods, D-Series pods, D-SS pods, Radiance pods, SR-M pods and SR-Q pods.

Not for: Model years outside the range above: the body changes between generations, so other years need a different part. Other vehicles in this range use their own part numbers (40335, 46750, 40331, 41656, 41657, 41658, 41659, 46701, 46717, 46719, and more). Lights, harness and switch are sold separately.

About Rigid Industries

RIGID
INDUSTRIES.

Rigid Industries started in Gilbert, Arizona in 2006 as a seller of powersports parts. Its engineers decided halogen and HID lamps were holding drivers back and went after a better light, and the company credits that work with its patented Hybrid Optical System and with launching the first LED light bar.

Rigid has since built lighting with OEM partners including Toyota, Ford and Polaris, and it says its lights are made to pass demanding OEM test standards. The range now runs from compact pods and round lights to curved and straight light bars, SAE street-legal lights and vehicle kits. Rigid is part of Clarience Technologies, a group of vehicle lighting, vision and safety brands.

Buying Rigid from Prestige Truck. We are an authorized Rigid dealer, and every Rigid light we sell is new, genuine Rigid product. Rigid's warranty protects the original buyer with proof of purchase and does not extend to lights bought from unauthorized third-party marketplace sellers, so keep your Prestige Truck order receipt with your records.

Frequently Asked Questions

Which vehicles does it fit?

The 2022-2026 Toyota Tundra. Other years use a different Rigid part.

Which lights go on it?

Rigid lists 4" 360-Series pods, D-Series pods, D-SS pods, Radiance pods, SR-M pods and SR-Q pods. The lights are sold separately.

Are lights included?

No. This is the brackets and mounting hardware only, so choose Rigid lights that suit the mount; they're sold separately.

What warranty does it carry?

Rigid lists a 2-year warranty on this mount against manufacturing defects; the Warranty section below has the full terms.

What is it made of?

Rigid builds the brackets in stainless steel with a black powder coat for UV resistance.

Can I run A-pillar lights on the road?

Only if the light itself carries an SAE rating. Rigid lists its pods without an SAE beam for off-road use only, so keep them switched off on public roads.

Installation

Recommended installationProfessional
What's involvedBrackets bolt on at the hood hinge bolts, the passenger cowl cap is trimmed and the lights wire in
Tools
  • Ratcheting 12mm wrench
  • 12mm socket and ratchet
  • 2-3" extension
  • 1/2" wrench
  • Masking tape

Here's the short version. Follow Rigid's install sheet (below) for the exact positions, wiring and hardware.

  1. Cut the power first. Disconnect any power source connected to the vehicle before you touch fuses or wiring.
  2. Caps off. Remove the rubber/plastic caps at the lower windshield corners. They go back on, but the passenger cap needs some trimming.
  3. Top hinge bolt only. Open the hood and remove only the top hood-mount bolt; never have both hinge bolts out at once.
  4. Hang the bracket. Fit the bracket on the top bolt, snug but free to swing, keeping clear of the driver-side wire. Remove the lower bolt with a short extension, swing the bracket into line and refit it, adding the rubber trim for 5" and larger lights.
  5. Tighten and pick the hole. Tighten both bolts to the factory figure. Use the outside or inside hole for 5" and larger lights and the middle hole for 4" and smaller.
  6. Check wiper clearance. With the light snug, tape the wiper, run one wiper cycle and confirm clearance at your chosen angle before final tightening, then open the hood slowly to check it clears the body.

Stuck on a step? Ask our install experts

Specifications

BrandRigid Industries
Part Number46613
ProductVehicle-specific A-pillar or cowl light mount
LightsNot included (sold separately)
MaterialStainless steel, black powder coat
Compatible lights4" 360-Series pods, D-Series pods, D-SS pods, Radiance pods, SR-M pods and SR-Q pods
Mount locationA-pillar
Weight2.6 lbs
UPC849774035647

More media

1 video

Warranty, shipping & returns

  • Warranty

    Rigid lists a 2-year warranty on this part, in line with its 2-year class for accessories such as mounts, covers and kits. It protects the original buyer against manufacturing defects for 2 years from the purchase date, with proof of purchase.
    • If Rigid confirms a defect, it replaces the part, refunds it or issues store credit, at its discretion, and it may ask for photos or video first.
    • Not covered: wear and tear, accidents, misuse, neglect, physical damage, changes or repairs made by anyone other than Rigid, improper installation, use with parts Rigid didn't make, natural events such as fire, flood or lightning, harsh road hazards, and damage caused by the delivering carrier.
    • Lens care: the polycarbonate lens can be damaged by ammonia-based cleaners and, over time, by road salt, and Rigid does not cover either. Clean it with mild soap and water or mineral spirits, rinse salt off with fresh water, and skip automatic car washes, whose soap may contain ammonia.
    • Rigid gives no other express or implied warranty, including merchantability or fitness for a particular purpose, and is not liable for indirect, special, incidental or consequential damages. Rigid also states that some of its lights are built and sold only for off-road driving.
    • Rigid's warranty does not apply to products bought from unauthorized sellers on third-party marketplaces. To make a claim, contact us with your order number and photos of the problem, and we'll take it through Rigid's process with you.

  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Most orders arrive within 1-5 business days.
    • We email your tracking number as soon as it ships.

  • Inspect on delivery

    Check that both brackets (driver and passenger side) and the hardware pack are in the carton and that the coating isn't chipped. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.

  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.
Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question