Weather Guard 297 Jumbo Super-Side Truck Tool Box, 96 in White Steel (297-3-02)

The Weather Guard 297-3-02 is the biggest box in the steel line, a Jumbo Super-Side that combines the full 96" length of an 8' bed with a deep 24" tall, 16-1/4" wide body for a huge 21.4ft³ of locking storage. Tall 20-1/4" door openings let you stand up long tools and stack cases the way no low-profile box can, and it still mounts high on one side rail so the bed floor stays clear. Heavy welded steel and a Brite White ARMOR TUF finish make it the rugged, maximum-capacity choice for crews that carry a full complement of tools and equipment.

What's Included:

• 297 Jumbo Super-Side steel Hi-Side truck tool box, white
• Two side-opening doors with tool-less QuickClip hinges
• Two drill-resistant locking T-handle latches with three-point latching
• Under-rail mounting brackets and hardware for a no-drill install
• Removable parts bin
• Full-perimeter weather seal with rain gutter, pre-installed
• Weather Guard installation instructions

Features

Heavy Welded Steel Body
The 297-3-02 is built from heavy welded steel for the most rugged, pry-resistant Hi-Side box Weather Guard makes. It takes daily jobsite abuse and stands up to break-in attempts, so your tools stay put and protected shift after shift.

Brite White ARMOR TUF Finish
A Brite White ARMOR TUF powder coat covers the smooth steel to fight scratches, fading and corrosion and give your truck a clean, professional white look. ARMOR TUF is Weather Guard's toughest coating, built to hold up to sun, chemicals and the weather.

Twin Locking Doors, Drill-Resistant Locks
Two side-opening doors each use a drill-resistant lock core and a three-point latching system to resist break-ins, so gear on both ends of the box stays secure. The doors open wide for easy reach into the full 21.4ft³ interior.

Tool-Less QuickClip Doors
The doors adjust from 90 to 180 degrees and pop off with QuickClips, no tools required, so you can fully remove a door for loading and clip it back on in seconds. It makes packing long or bulky gear far easier.

Rain Gutter and Full Weather Seal
A rain gutter design paired with a full-perimeter weather seal keeps rain, dust and debris out of the box and off your tools. Your gear stays dry and ready in wet weather and on dusty jobsites.

Rides High, Frees Your Bed Floor
The Hi-Side design mounts on top of one bed side rail and stands up along the bedside, so your tools ride up and out of the way and the bed floor stays open for sheet goods, lumber and cargo. A removable parts bin keeps small items organized up top.

Removable Parts Bin and a Wide Door Opening
Each door on the 297-3-02 opens to a clear 20-1/4" high by 42-3/4" wide opening, which is enough to slide long hand tools and cases straight in from the side of the bed. A removable parts bin rides inside for fasteners, fittings and the small parts that otherwise end up loose in the bottom, and it lifts out when you need the full length of the box.

Fitment & Compatibility

Specifications

• Series: 297 Series Jumbo Super-Side
• Style: 24" top-mount side-rail box, twin side doors
• Storage Capacity: 21.4ft³
• Exterior Dimensions: 96-1/4"L x 16-1/4"W x 24"H
• Door Opening (each side): 20-1/4" high x 42-3/4" wide
• Material: Welded steel
• Finish: Brite White ARMOR TUF powder coat
• Doors: Two side-opening doors, tool-less QuickClip hinges, 90 to 180 degrees
• Latching: Drill-resistant lock core, three-point latching, each door
• Weather Seal: Rain gutter with full-perimeter weather seal
• Mounting: Mounts on top of one bed side rail, under-rail brackets and hardware included, no drilling required
• Construction: Heavy Duty Welded
• Lid Construction: Heavy Duty C-Channel Reinforced
• Weather Strip Profile: Memory Resistant D-Shaped Ribbed
• Key Alike: Key Alike On Request
• Bed Style: Style Side
• Body Gauge: 14-ga
• Shipping Size: 98-3/4"L x 17-1/8"W x 24-3/8"H, 174 lb
• UPC: 783965038423
• Weight: About 174 lb (174 lb shipping)
• Warranty: Limited Lifetime
• Made In: USA

Installation

Type: Top-of-rail side mount, clamp-in with no drilling  ·  Time: About 30 to 45 minutes  ·  Tools: Socket or wrench set and a tape measure; no drill needed with the included under-rail brackets  ·  Difficulty: Easy to moderate, best done with two people because of the 96" length and weight

Set the box on top of one bed side rail and position it front to back, then hook the included brackets under the rail lip and tighten the hardware evenly so the box sits flat and the doors seal. Because the box is 96" long and heavy steel, have a second person help lift and steady it while you clamp it down. Follow the Weather Guard Hi-Side and Super-Side installation instructions for exact bracket placement and torque.

Watch the installation walkthrough:

Resources

Everything you need for your Weather Guard 297 Jumbo Super-Side Truck Tool Box, 96" White Steel, in one place.

• Official Weather Guard 297 Jumbo Super-Side Truck Tool Box, 96" White Steel installation manual (PDF), the manufacturer's step-by-step guide covering mounting, included hardware and torque specs.

Warranty, Shipping & Returns

Warranty. Limited Lifetime Warranty from Weather Guard against defects in materials and workmanship.

Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.

Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.

Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.

About Weather Guard

Weather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.

Known for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.

Backed by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.